Install Crystal Reports on same machine as Crystal Reports Server 2011

Hi All,
Is it possible to install Crystal Reports 2008 or 2011 on the same machine as Crystal Reports Server 2011.
We have a number of different Data Sources which are not so accessible by the clients but will be accessible from our Server.
So is there a way to allow users to develop reports on the server - by the above suggestion or some other method?
Thanks,
Sinead

Hi,
I am not 100% sure if it's possible with these versions. with older versions, they shared common folders and it was not recommended. Have into account that applying Service Packs and FixPacks will be complicated as well.
I won't recommend either giving access to your users to the server machine. You can always set up Terminal Server with only the Crystal designer and middleware configured and tailor the level of access users have to that specific server.
Regards,
Julian

Similar Messages

Issue while installing TimesTen on the same machine as the Oracle DB.

Hi,
I am new to the TimesTen(TT) and facing the issue of installing TimesTen on the same machine as the Oracle DB(this is our project requirement ). I am trying to install on Solaris 32bit machine with 64GB RAM. When i installed only TT there is no issue. But I am not able to installed if I installed Oracle DB and after that I installed TimesTen on same machine.
Further if I tried to installed the TT with less size i.e.128MB along with oracle DB on same machine it installed successfully . But when i tried TimesTen with 16GB size it doesn't installed successfully along with oracle DB. Also, I tried to installed only TimesTen with size 16GB it installed without any error.
Could you please let me know what could be the possible reason for the above behavior.
Also i read in some threads in the same forum mentioning that "it is not recommend to installing TimesTen on the same machine as the Oracle DB as they can contend for resources (memory and CPU). Could you please elobrate more on this what kind of issues can possibly occur in this kind of scenario.
Please let me know in case more information is required.
Thanks in advance !!!
Regards,
Sanjay

Can you please explain what you mean by 'install' in this context? Memory size is not an installation time option with TimesTen. It sounds to me like you mean 'am not able to configure a TimesTen database to use xxx MB/GB of memory' rather than 'unable to install TimesTen'?
With a 32-bit operating system the largest TimesTen database you will be able to create is 2 GB. If you need a larger TimesTen database then you need to run 64-bit TimesTen on a 64-bit OS.
It general it really isn't a good idea to run TimesTen on the same machine as the Oracle database. Perhaps you can share what your overall objectives are? WHat are you looking to achieve by using TimesTen? If we understand that we can give better advice.
Chris

Installing MDW on the same machine as MRS

Hi Experts:
We have MRS running on a Windows 2003 Server (Enterprise) and is working fine.
We would now like to install MDW on the same machine. I have also installed the MS Office 2003 and MS Visual Studio.NET 2003. However, it is still not highlighting the option that would allow me to install MDW.
In the MDW prerequisites it states that I would need Windows 2000 or XP, however my machine is running on MS Windows Server 2003 (Enterprise Edition), would this make a difference?
Also is there a way of finding what I am exactly missing? I have the install guide and I have everything mentioned in that guide. I am also mentioning a few things that are slightly different.
Operating system is MS Windows 2003 Server instead of MS Windows 2000
DB is MS SQL 2000 Enterprise instead of Personal or MSDE
Can anyone shed some insight into this/
Thanks
Imran

Hi:
This is what I have figured out.
I wasn't able to find a way of installing MRS and MDW together. If MRS is installed first then MDW option is automatically is omitted even if all prerequisites are met.
If MDW is installed first then, the system is going to give you the option of MRS, howerver during the install it is going to remove all MDW components and replace them with MRS components.
Also, installing MRS on a XP is possible only after installing MS SQL 2000 (Personal Ed.). Enterprise and Standard are not installable on windows XP.
Installing MDW on Windows Server is possible, and any edition of SQL will work for the install.
I hope someone will find this information useful.
IK

How to install iPlanet & NAS on same machine

Hi,
We have successfully installed iPlanet 6.0 SP3 on solaris in a webless
mode. But both Webserver and App. server are running in the same
machine. Now we have a requirement, that one other group wants to share
the same machine, wherein they want to install NAS 4.0 on the same
machine.
Is it possible to install both App. server on the machine, while sharing
the webserver.
I Would appreciate if any one can say, if this is doable and how.
Thanks in advance
Regards
Veera

You can do that if you put iAS and NAS on two different web server
instances (http daemons). However, you might not get support on it so
you better check with iplanet support before you put something like this
into production. For development environments it should not be a
problem.
"Veera N. Subramanian" wrote:
>
Hi,
We have successfully installed iPlanet 6.0 SP3 on solaris in a webless
mode. But both Webserver and App. server are running in the same
machine. Now we have a requirement, that one other group wants to share
the same machine, wherein they want to install NAS 4.0 on the same
machine.
Is it possible to install both App. server on the machine, while sharing
the webserver.
I Would appreciate if any one can say, if this is doable and how.
Thanks in advance
Regards
Veera--
Han-Dat Luc ([email protected])
Senior Consultant
SUN Professional Services (iPlanet)
iPlanet e-commerce Solutions
Sun Microsystems Australia Pty Ltd

Can I install 8 on the same machine where I have 7?

Can I install app server 8 on the same machine where I have app server 7 installed already? Are there any conflicts that I need to be aware of?

Yes, you can install both 7 and 8 on the same system - you simply have to specify different installation location (and different set of port numbers if you plan to use both installations at the same time).
You can also use upgrade tool which is shipped with release 8 to migrate your server configuration and deployed applications from the old installation into the new installation. See installation guide for more details on this:
http://docs.sun.com/source/817-6083/upgrade.html

Install two databases on same machine

Hi all,
I have a machine with win 2000 srv with an oracle 8.0.6 installed; Now I want to install a new db, new istance, with oracle 8.1.7.4, but i want to maintaining the db 8.0.6. How i must proceed?
thanks
pedro

Hi again,
You can use two listeners.... but then you need to use 2 TCP ports. Not really usefull.
You only need one listener for both ORACLE_HOMEs. It's advisable to use the one from the latest release (i.e. 8i).
Using only one listener is afaik the good way to set things up.
Regards,
Yoann.

Install 2 netweaver on same machine?

Dear expert,
We are using sap portal + employee self service, my question is can we install 2 netweaver + ess in one machine. For example the first netweaver is connect with client 100 the next netweaver connect with client 200 backend. Please clarify. Thank you

Yes, this is possible by using a different instance number for the second instance.
Make sure you have enough physical memory on the machine to run both instances.
Markus

Data discrepancy between Webi Report and same Query fired on SQL Server 2k5

Hi ,
We are facing an issue in BO XI R2.
We need to run a Webi report in which negative values for forecasting data for year 2011 and 2012 should be displayed.
When we are running this report for negative values, we are getting message u2018There is no data corresponding to this queryu2019.
Then we tried executing the same query on Database. Here at db level we got the correct required result.
So now we are not able to find the reason for data discrepancy .
Why the same query generated by Webi is providing correct data when fired on reporting database and not when running the Webi Report.
Checklist we have gone through for this troubleshooting is-
-Connections of Universe (Is universe pointing to same database or not)
-Any filter condition present at universe level and at report level.
Could anyone please help on this.
Regards,
Vaibhav

Vaibhav,
Have you tried the following when you are in WebI: go under the Edit Query panel, click on the "SQL" icon, and review the query that is getting generated? At this point you can also click on the "copy" option, then paste this query into your SQL application analyzer and run to see what results are generated. To me, it sounds like the portion trying to generate the "minus" sign might be getting tripped up causing the disconnect....
Thanks,
John

Time Machine and Windows Home Server 2011 - Why no worky? (Original WHS worked fine)

So I've had an original WHS (HP Mediasmart) for years, thought it was time to upgrade...built a new server using WHS 2011 and everything on the windows side works great.
I'm not a mac guy, so only mac in the house is my GF's which had no trouble backing up to my previous WHS mediasmart using time machine, it was perfectly happy with it.
With WHS 2011, it seems to absolutely hate it; but it REFUSES to give an error. Just goes to "preparing" for about 2-3 seconds then immediately back to "next backup at X time".
I've done the tweaks in terminal to allow it to use network drives for time machine (which I didn't have to do when it was backing up to the old mediasmart, so I'm assuming maybe the mediasmart installer for OSX did that itself?)...The mac sees the server, sees the share, I can copy data to it and from it, just time machine refuses to use it (it allows me to select the share as the backup drive, just doesn't actually backup to it).
I've also tried creating custom sparsebundle files in terminal per some online guides/how-to's to get it to work...no go...used the wired ethernet ports mac address and tried it with the wireless ones too...neither worked.
What am I missing here?
It's Mac OSX 10.5.8

Mcdonsco,
Have you reviewed the logs on the computer you are trying to backup? What does it say in the console?

9i report server die after installed database on same machine

Hi,
I had a oracle 9i developer suite installed first on my win2000 server, and it runs fine until I installed the oracle 9i database.
Now I can still run the "Start OC4J Instance.bat" and there is no error mesg shows up, but when I tried to access the report http://mypc:8888/reports/, it never able to go this site and no any error mesg.
Do these two products can coexists on same machine?
They are installed on separate directory of course.
Any idea and suggestion?
Thanks.
David

* When you give "Start oc4j" you should be able to see a dos window open and up and a message like "Oracle Containers for 9023 running" (if I remember correctly). I assume you are able to see that
* Give
http://mypc:8888/reports/rwservlet
What do you get ?
Infact what error message are you getting now exactly ?
* In $OH\bin
If you give
rwserver server=any_name
in a dos cmd window
are you able to see the server with that name startup and up and running ?
* I am not sure about DB and Reports in same machine coexisting. But in general oracle products can coexist in same machine. Only problem is because of PATH conflicts.
If in SYSTEM path (in ctrl panel - system - environment)
if there are some path clashes, there may be problems.
Thanks
Ratheesh

How to install iFS and iAS on the same machine?

I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
Thanks a lot,
Marek

You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
This worked for me.
I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
Good Luck.
Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
null

Is it possible to install Oracle 9i and SQL server on same machine

1. Is it possible to install Oracle 9i and SQL server on same machine ?
2. If yes, what are the problems i may encounter during installation
3. What should be hardware configuration for installing both databases in same machine like hard disk space, RAM speed etc,

Hi,
1. Yes you can do it.
2. There shouldn't be any problems
3. Depends on your needs
Jarek

Problem Installing Oracle 8i and Oracle 10g client on same machine

Hi Gurus,,
I am new on DBAside....
I have already installed Oracle 10g R2.m planning to install oracle 8i on same machine..
What steps should i follow in order to avoid conflict..
The OS is Windows XP SP3....
I know that installing oracle 8i first and than installing oracle 10g is more convinient..But my requirements are different..
so have to install oracle 10g first and then Oracle 8i on same machine..
Thanks in anticipation.

Hold on - it DOES matter - you shouldn't update new repository with old oracle installer, so be careful...
Paul

Support validity question about installing and configuring SP13 on same machine as FAST to use both as search engines for SP2010

Hi,
I have a SharePoint 2010 farm which is using its own servers.
This farm has a FAST Search for SharePoint server which is a standalone on a dedicated server.
This farm is my testing staging environment and not a Production environment, eventhough its almost an exact copy of the Production farm.
I would like to replace the FAST server with SharePoint 2013 as a search engine for my SharePoint 2010 farm.
Because i have a standalone deployment of FAST on a dedicated server and i dont have any more servers to add to this farm,
I would like to install SharePoint 2013 on same server as FAST while FAST is still active, connect it to the 2010 farm and do some tests before i will remove the FAST content and query SSA's.
I would like to know if installing a SP2013 on same machine as FAST is supported by Microsoft as long as the FAST is not connected to the SP2013? (performance is not an issue)
What about All in one machines like development servers, is it supported by Microsoft to install FAST on same machine as SP2010 farm? (again, performance is not an issue)
thanks,
Guy

I would like to know if this scenario is supported by microsoft.
This installation will be for testing purposes only, if there are any issues with installing SharePoint2013 on a FAST search machine, i would like to know what kind of problems i may run into.
I'd also like to clear out that this FAST and SharePoint2013 are not comunicating with eachother but with a SharePoint2010 farm that is configured on different servers.
I would really appreciate direct answers to these questions.
thanks for your answers,
Guy

ZFS7 install on same machine as ZFD7

We are just about finished setting up a Zen 7 desktop management
server on Netware OES. We have the inventory database on this machine
too. We have around 500 desktops and around 45 servers, including the
NBO's.
I was told prior to this when I had Zen 4.01 installed on another box,
that if I wanted to use ZFS, I should install it on the same machine
as the ZFD was installed.
My primary reason for ZFS is to use TED to distribute files and apps
to our 19 NBO boxes.
Will there be any trouble if I install ZFS 7 on the ZFD 7 box? Is
this recommended?
Should I steer clear of this?
Any advice would be helpful.
Thanks
Tony

ZFD 7 and ZSM 7 can run on a single box without problems
Ron
"Tony Cape" <[email protected]> wrote in message
news:[email protected]..
> We are just about finished setting up a Zen 7 desktop management
> server on Netware OES. We have the inventory database on this machine
> too. We have around 500 desktops and around 45 servers, including the
> NBO's.
>
> I was told prior to this when I had Zen 4.01 installed on another box,
> that if I wanted to use ZFS, I should install it on the same machine
> as the ZFD was installed.
>
> My primary reason for ZFS is to use TED to distribute files and apps
> to our 19 NBO boxes.
>
>
> Will there be any trouble if I install ZFS 7 on the ZFD 7 box? Is
> this recommended?
>
> Should I steer clear of this?
>
> Any advice would be helpful.
>
> Thanks
>
> Tony

Install Crystal Reports on same machine as Crystal Reports Server 2011

Similar Messages

Maybe you are looking for