Install Crystal Reports XI SP4 on Vista

I cannot get any service pack installed on Vista Business 32.  It starts and then I get an error "install "Setup has stopped working."  Any help would be appreciated.
-Ben

Hi   Benjamin,
In Crystal XI supported platforms Windows Vista is supported.
Try to test the issue  by installing the latest service pack SP4.
But if you have full install of SP4 then you can install   else you need to install  SP2 then the later version.
Each service pack will fix individual issue.
Thanks,
Naveen.

Similar Messages

  • Crystal Report XI crashes on Vista

    We recently installed Crystal Report XI on a Vista (32 bit).
    The app opens fine and can view/run reports.
    But, when we attempt to modify crystal report(s) the app will grey out and an OS message will appear: "Crystal Reports has stopped working".
    This does not happen on our CRXI & XP installations, so I was wondering if CRXI is Vista compatible?
    If so, was there any extra installations needed?
    thanks
    Tony

    Hi Tony,
    Try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Its a known issue with vista operating system and this is workaround for it.
    Hope that helps!!
    Regards,
    Shweta

  • Error installing Crystal Reports 2008 in Vista

    I am trying to load Crystal Reports 2008 on a Vista machine (32 bit).  I keep getting an error message and set-up will not continue.  Details show APPCRASH.
    How can I get this to install??????
    Thanks,

    Hi Debbie
    We would like to know the following information:
    - From which source (CD or Website) are you installing the product?
    - The link from where you have downloaded the product.
    - What happens if you install the product by login as an Administrator?
    - Is the download saved on your local drive?
    Thanks
    Poonam

  • Probleming Installing Crystal Reports 2008 Service Pack 1 to Vista 64bit OS

    Hi There,
    Whenever I attempt to install SP1 to Crystal Reports 2008 I am unable to get past the disk space check.  It just continues to display the message below.
    "please wait while the installer finishes determining your disk space". 
    I found this to be an issue on the 64bit OS only because I can install to Vista 32bit no problem. 
    Please help.
    Thanks
    Mark

    Hi Mark,
    Try with this:
    Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
    bcdedit.exe /set nx AlwaysOff
    Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
    bcdedit.exe /set nx AlwaysOn
    Now try to install Crystal reports.
    Regards,
    Shweta

  • Error installing crystal reports 2011

    I am trying to install crystal reports 2011 and I keep getting an error that I need administrative priviliges to continue.  I am the administrator and i have tried running as administrator.  Why does this keep giving me this error.  I am running the 32 bit version of windows 7.  I have .net 4 installed.

    Ah, worth a try.... Likely your IT guys burn images all from the same master or using the same CD's DVD's to install from. I have installed it on various OS, XP, Windows 7, Vista, 2008 32 and 64 bits and no problems. But they are clean also, no third party app's pre-installed other than Visual Studio 2010. And My PC at home has just about everything on it an no issues with it either...
    I can't say why then. I suggest you purchase a [support case|http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=38156200] and get into the Report Design queue and get them to get more info from you. Logs and other files cannot be attached to Forums.
    It appears to be known issues and they are working on getting it resolved. It likely is a missing dependency or some version specific dependency we and you may have a newer version. In either case you can get a refund.
    Or wait until SP 2 comes out and hope your specific issue is fixed.
    Thanks again
    Don

  • Problem of installing Crystal Reports Print Control(ActiveX)

    Environment
    Windows 20003 SP1
    ASP.NET 2.0
    Crystal Reports XI SP4
    Background
    I am converting ASP application to ASP.NET.
    I used ActiveX Viewer on ASP.
    Now, I decide to use CrystalReportViewer and PrintControl(ActiveX) on ASP.NET.
    CrystalReportViewer.PrintMode = CrystalDecisions.Web.PrintMode.ActiveX
    Problem
    I want to make normal user (user which is in "Users" group)  use PrintControl because of security reason.
    But normal user can't use PrintControl.
    Reproduce Procedure:
    1. logon windows as admin user.
    2. install ActiveX (PrintControl) after clicking print icon.
    3. logon windows as normal user.
    4. when normal user clicks print icon, nothing happens.
        (small dialog for printing is displayed, but nothing happens.It looks like "hang". )
    When I used ActiveXViewer on ASP, the following steps worked well.
    1. logon windows as admin user.
    2. Install ActiveX (ActiveXViewer) in report screen.
    3. Logon windows as nomal user.
    4. normal user (of cource, other admin users) can use ActiveXViewer without installation.
    Could you tell me how to use PrintControl on normal user authority?

    Thank you very much for your answer.
    I solved it.
    The cause of this problem is , the dll version string in print.js which creates <OBJECT> tag dinamically is different from dll file version.
    i.e. the version string in <OBJECT> tag is newer than dll version.
    As a result, each time user accesses HTMLViewer, cab file is downloaded and installed.
    We modified the dll version string in print.js, and my problem is fixed.

  • I installed Crystal Reports server 2008, i'm geting server not started erro

    Hi,
        I'm getting error with server not started or not available error (FWM 01003). If i check in CCM, i don't see any entry for CMS server entry. How to start CMS server??? Please advise me. i installed trail version of crystal reports server 2008.
    thanks in advance!!!
    Ben.

    I am a consultant for Business Object products and experienced the same exact problem. We were installing Business Objects Edge, which is similar to Crystal Reports Server 2008, with MS SQL Server 2000 SP4 for the CMS System Database on a server that was named <Numbers>-<Letters>.
    We discovered that some scripts that the installation and CMS run fail when the Server Name of the Business Objects Edge Server start with a number. When the CMS System Database is setup, a table called CMS_IdNumbers6 is created. It should have three columns, NameId, IdName and third column that is named after the server where you are installing Crystal Reports Server 2008, Business Objects Edge or Business Objects Enterprise. This column is called <ServerName>_iad_intensive_int_6400.
    This column fails to get created when your server name starts with a number and subsequent scripts that insert records into this column fail. Renaming the server where we were installing Business Objects Edge to <Letters><Numbers> (no dashes either to be safe) solved the problem. We were successfully able to install Business Objects Edge. Please note: This is the server where you are installing Crystal Reports Server 2008 that needs to be renamed and NOT the MS SQL Server--just making a note because we had to go back and forth with our server team a couple of times on this point.

  • Unable to install Crystal Reports 2008 SP07

    Hi, everyone
    Currently using
    Crystal Reports 2008 Product: 12.4.0.966
    I have the problem about installation of Crystal Reports 2008 Service Pack.
    I could upgrade it to SP4. However, I'm not able to install Crystal Reports 2008 Service Pack 07 update due to the error message product version is too old.
    Does someone have any similar experience?
    Regrards,
    Kano

    Hello Takumo,
    You can upgrade to SP7 only if you have SP5 or SP6 install. This is why you are getting error when upgrading from SP4 to SP7.
    So, you have to follow this path CR2008 SP4 -> SP5 or SP6 -> SP7
    Else you can also install full build as suggested by Abhilash.
    - CHETAN

  • Invalid Key code Error while installing crystal report server 11

    While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
    MAILS--Dear Mohit,
    Thanks for the patience.
    We have received the below update from the Licensing Team.
    You received your permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but you elected to use version XI instead and received key .
    You would need to enroll the licenses in maintenance if you want to upgrade them.
    In case of any queries please create a ticket via the Service Market Place.
    Regards,
    Jessy
    Customer Interaction Center
    SAP Active Global Support
    Hello Jessy,
    The customer received their permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but they elected to use version XI instead and they received key .
    They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
    Kind regards,
    Rosemary
    From: BOSAPASIA
    Sent: 29 September 2009 05:49
    To: Savage, Rosemary
    Subject: FW: Crystal Reports Server Installation Issue
    Importance: High
    HI Rose ,
    Need your assistance on the below issue.
    Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
    He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
    Regards,
    Jessy
    CIC Team Lead
    Customer Interaction Center
    Global Support Centre India
    SAP Labs India Pvt Ltd
    Hi,
    Providing you with the required details to proceed further
    Registration Number-
    Registration Email Address-taxmantra.support
    And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
    Dear Mohitk,
    Thank you for your information.
    I checked with the concerned colleague and received the below update:
    Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
    If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
    If you did not register before, as the promotion is over so the key code could not be replaced.
    I request you to kindly check the same at your end and revert with the details.
    Moreover, there are two ways for Crystal Report customer to get support.
    One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
    A learning map was provided, listed on left column.
    The other is customer with only Crystal report product, the support is via SDN.
    http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
    Customers can first check whether other customer has got the same issue and find the reply from our engineers.
    You may also post your own thread for support.
    Anything else I could help, please do not hesitate to contact again.
    Hi,
    I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
    Please find attached the Scanned Document  containing the details as per the details required by you.
    Hope to see a quick resolution for the issue.
    Dear Mohit,
    Thank you for your e-mail.
    As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
    Your customer number:
    Your customer name and address:
    Purchase order number:
    Any other products purchased along with Crystal Reports Server 11
    Any S-User Id:
    Any old case ID:
    Please feel free to contact us if any further queries.
    Hi,
    I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
    We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
    "The product key code you have entered is incorrect"
    We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
    Please help us to resolve the issue as early as possible.
    My contact number:
    If you need any further information do let me know

    Ajit,
      By design, the product is not able to be installed under the superuser account.
    1.  Create a new user and specify a home directory for the user without a quota set.
    2.  Copy or move the installation files to a directory that the new user can read.  I suggest you move the installation files directly into the new user's home directory.
    3.  Logon as the new user (or su - newuser)
    4.  run the installation shell script using that new user's account.
    NOTE:  Ensure the system meets the requirements from the supported platforms documents.
    .Tony

  • Error 1305 while installing Crystal Reports 2008, JavaSDK

    While installing Crystal Reports from the original media on a new Lenovo Thinkpad running Windows XP Pro SP3 I get the following error while installing:
    Error 1305: Error reading from File: c:\program files\Business Objects\javasdk\jre\audio\soundbank.gm. Verify that the file exists and that you can access it.
    I have the option to retry or cancel, obviously cancel exits the installer. Retry just fails again. I have tried to access the file (which does exist) and I cannot because it is in use. I used Sysinternals process explorer to find out what has the file in use and it is msiexec.exe which is the Microsoft Installer service which is running in order to install CR2008.
    I have tried restarting, setting permissions on the file and folder, uninstalling and reinstalling Java VM from Sun. I even tried killing msiexec (which killed the install). I even tried taking out all reference to java in a custom install.
    I am at a loss on what to do next. Any help would be appreciated.
    -Michael

    I found that if I installed it from a copied local directory instead of the CD Rom that it worked

  • Deploy Visual Basic 6.0 RDC application using Crystal Reports 9 on Windows Vista

    Post Author: albe
    CA Forum: General
    When attempting to deploy a Visual Basic 6.0 Report Designer Component (RDC) application using Crystal Reports 9 on Windows Vista systems, the application fails after the first print or preview (that show normally) and an error occurred: -2147417848 Method '' of object '' failed.
    The app use the RDC and Active Data; I verify that the problem is encountered when the app calls the 'SetDataSource' method.
    I tried everything that came in my mind: reinstalling it a few times, with administrator priviledges, disabling uac, manually registering dlls, ...
    I hope that this will be fixed, since Crystal Report 9 is the last CR version compatible with windows 98.
    thanks in advance,
    Alberto

    Hello,
    This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
    Try downloading the only patches available from:
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
    ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
    Thank you
    Don

  • Unable to Install Crystal Reports 2008 on Windows 7 64 bit

    Hi,
       I am unable to install Crystal Reports 2008 on Windows 7 64 bit laptop. Is this not supported?
    BR, Nanda Kishore

    i INSTALLED NOW

  • Getting an error trying to install Crystal Reports 2008 on a 64 bit Windows

    reformatted my computer and now I'm trying to install Crystal Reports 2008 on 64 bit windows 7 box.  When the "Registering modules" portion of the install comes up, I get a message that a dll has failed to register.  I saw something about not having the Microsoft Visual c++ 2005 redistributable pack (x86) installed but that was not it either.
    The cd label say Crystal Reports to Crystal Reports 2008 Upgrade, but it does not seem like I have to have the older version of Crystal insatlled.
    Any ideas how to fix this ?

    Hello together,
    i've had the same problem. Tried to install CR SP 2 "cr2008win_sp2.exe" onto an existing CR 2008 SP1 installation, and got the above error. After extracting the cr2008win_sp2.exe to an folder using Winzip (or just start Installation, the source would be extracted to "c:\temp" ), navigate to the subfolder "\package" and execute the CrystalReports.msp (in my case: c:\temp\package\CrystalReports.msp). This start's the Installation of SP 2. If you get an version mismatch, use parameter SKIP_PATCH_VERSION_CHECK=1 by typing command in an dos prompt "c:\temp\package\CrystalReports.msp SKIP_PATCH_VERSION_CHECK=1" but remember, you need to have an SP1 installed (somebody said, SP's are incremental).
    Reboot and apply then the  CR 2008 SP2 FixPack 7 "cr2008fp27.exe". Use this Link to Download CR and Xcelsius Stuff:
    [https://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm]
    I would suggest you not to use IE for downloading, use an alternative browser. I got only bad downloads (IE8 on Win7).
    This is the way i did and this works pretty good.
    Good Luck
    Matthias

  • Unable to install Crystal Report 8.5

    Hi all,
    I really need some help as I have problem installing Crystal Report 8.5 on another hard disk as my previous hard disk crashed.
    I have tried the calling tech support hotline @ 800-4922129 but they said they are not able to find my company's name in their database.
    It might be due to the merging of SAP + Crystal Report and this crystal report is installed way back in Year 2001.
    The technical support personel said there is nothing she's able to help me if I do not have the customer no and the only way is for me to post @ the forum at this website.
    My company is currently based in Singapore.
    The only information I have is the CD Keycode,Product Keycode and Crystal Decisions Registration Number.
    I have 5 license Key which was bought way back in Year 2001.
    The problem arises during the installation after I entered the "CD Keycode" and they prompt me to enter the "License Key" which I do not have it.
    Would really appreciate your fast response from you guys as I really hope to settle this issue asap.
    Thanks in advance.
    Regards,
    Ryan Teo
    Edited by: Ryan Teo on Jul 23, 2008 9:44 AM

    Hello Ryan,
    as CR 85 is long out of support I am happy to share my keycode
    A6A50-0900000-00000ZP.
    Hope this helps
    Falk

  • Installing Crystal Report AddOn for 8.8

    Dear All,
    Please let me know how to install Crystal Report AddOn  for 8.8 B one ? After installing the Addon When I am starting the Add On I am getting as error as External Connection to the database failed. SAP Crystal AddOn may not function properly. Please rerun the account setup with superuser login.
    And when I click on Administration>>Crystal Reports Administration>> Account Setup screen to setup the account,  I am getting error as Item-  Could not commit action because the item is currently in focus [66000-23].
    Regards,
    Noor

    Dear Noor,
    You may check this thread:
    Crystal reports for Business One 8.8
    Thanks,
    Gordon

Maybe you are looking for