Install Discoverer in R12

Hi All,
I need to install Discoverer 11g. Following is our Environment.
EBS : R12.1.3 with Shared application Tier(APPL_TOP) pcp enabled.(2nodes)
DB : R11.2.0.2 RAC with ASM(2Nodes)
My question is : Can i install discoverer 11g in One EBS node only and have it access from Application . Or i have to install in both the nodes .
please help.
regards
Mapps

Pl see this MOS Doc (Supported Architectures section)
Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 [ID 1074326.1]
It is recommended that Discoverer be installed on a separate server. If you plan to install on your current servers, then an install on one node will be sufficient. Just be aware that it would not be highly available (i.e. if the node on which Discoverer is installed goes down, you will not have any Discoverer services available)
HTH
Srini

Similar Messages

How to install discoverer on R12

Can anyone suggest me the step by step Installation guide document for installing 11g discoverer in r12 instance linux environment????

Let me google that for you

Discoverer in R12

Hai all,
tried installing Discoverer for r12 in the same server where I have oracle applications installed..discovere installation went fine.. made al the changes in the application tier,run autoconfig..now BI is working fine..when I try to start the application services, opm doesnt start failes with the error bind address already in use
for the port 6200
[root@apps ~]# lsof | grep 6200
opmn 15030 oradisc 9u IPv4 110635 TCP *:6200 (LISTEN)
how can I resolve this ?
Kai

Hussain,
I can able to access the AS Em page using the following URl :
http://hostname:1156
whereas when I click discoviewer am getting the error : THIS PAGE CAANOT BE DISPLAYED..
When I used check discoverer.sh in the util directory , I got the following error :
Initializing ORB...
ORB initialized successfully.
Checking for Discoverer "ServicesStatus"...
Process is down
Error: Discoverer "ServicesStatus" is not running. Discoverer sessions cannot be started and the status of the Discoverer component in the Enterprise Manager will be shown as down.
Hint: Start ServicesStatus by running the following command:
/oracle/appl2/oracle/opmn/bin/opmnctl startproc ias-component=Discoverer process-type=ServicesStatus
Checking the adminstrator set soft limit on no. of sessions ...
null
Error reading the OPMN configuration file. Unable to determine the soft limit on sessons.
Hint: Administrators can increase the soft limit on Discoverer sessions by modifying
"//ias-component[id='Discoverer']/process-type[id='SessionServer']/process-set/@maxprocs" attribute in the file /oracle/appl2/oracle/opmn/conf/opmn.xml
Checking for Discoverer Preferences component...
Process is down
Error: Discoverer Preferences component is not found. Changes to options will not be saved.
Hint: Start Preference by running the following command:
/oracle/appl2/oracle/opmn/bin/opmnctl startproc ias-component=Discoverer process-type=PreferenceServer
Binding to Discoverer Server...
No processes match the specified configuration.
Error: Failed to bind to Discoverer Server.
Hint: Try increasing the timeout by changing the timeout value in opmn.xml.
Checking that the machine has only one network card...
Yes.
opmnctl status shows :
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
WebCache | WebCache | 24783 | Alive
WebCache | WebCacheAdmin | 24784 | Alive
OC4J | home | 24786 | Alive
HTTP_Server | HTTP_Server | 24785 | Alive
Any idea ?
Kai

How to install discoverer 10g on existing EBSR12.1.3

Hi ,
iam newbi to discoverer 10g. I have got the application server 10g (10.1.0.2) from the bundle of dvds of EBS R12 SUITE. i need to install dsicoverer 10 g on existing ebs R12.1.3. COuld you please suggest me the steps i need to follow for installation of DISCOVERER 10G.
please specify step by step how to install discoverer 10g on existing EBS 12.1.3.
Please specify what are the software i need to down load and how to install these software in sequential manner.
Please update me as soon as possible. Because i need to complete this installation by AUG1.
Best Regards,
Anil

1. do i need to create another user at the os level. Not necessarily, you can either use applmgr user (the owner of the application tier files) or create a new one.
2. shall i need to install this application server 10g with new user or with root user can i install the software. Please see the installation manual.
In the same link referenced above, click on Documentation tab just next to the Download tab and you find yourself at http://www.oracle.com/technetwork/middleware/ias/documentation/index.html
Select the version and click on View Library then you will find "Oracle Application Server Installation Guides" under the Setting Started tab.
3. After installing this software AS 10.1.0.2. In the document they mentioned that apply the 10.1.3 patch set.( i am not clear about this patch set, is it mandatory to apply this patch set).Yes
Please guide me how to start the installation and how to apply the patch set. Please check the installation manual and the patch README file.
Thanks,
Hussein

Report service is not working after install Discoverer..............

Hello,
I have installed Oracle Developer Suite 10gR2 (Forms/Reports) on my desktop, they were both working fine for a long time. I installed Discoverer 10gR2 (Administrator and Desktop) on the same machine recently. The Oracle Forms is still good, I can run forms on the local machine after I start OC4J instance. But the Reports is always hanging, even Showjobs. I can access http://host:port/reports/rwservlet, but anything under that is not working, hanging.......
Please help! Thanks in advance.

Hello,
The problem may be a PATH problem.
Start the reports server after having set the PATH :
set ORACLE_HOME=d:\oracle\ods1012
set PATH=%ORACLE_HOME%\jdk\jre\bin\classic;%ORACLE_HOME%\jdk\jre\bin;%ORACLE_HOME%\jdk\jre\bin\client;%ORACLE_HOME%\jlib;%ORACLE_HOME%\bin;%ORACLE_HOME%\jdk\bin;%ORACLE_HOME%\jre\1.4.2\bin\client;%ORACLE_HOME%\jre\1.4.2\bin;
Regards

Problem while installing discoverer desktop edition

HI
I find few error messages while installing discoverer desktop edition..
When i give oracle home as
name:OracleHome92
Location: DiscovererDesk
it gives me a error
" oracle discoverer doesnot support multiple installations thus it cannot be installed on oracleHome92.It can only be installed on 'OraHome92'"
When i give oracle home as
name:OraHome92
It automatically takes my 9i oracle home path i.e E:\oracle\ora92 and gives me a error like
"The location specified 'E:\Oracle\ora92', is already used an oracle home for an
'Oracle 82 beta'.It cann't be used as an oracle home for nt."
I have oracle 9i and form6i,report 6i installed in my system.
Please suggest me ..
Regards,
Satya

Hi
The easiest way to get a fully working TNSNAMES in a version 4 environment is to use the Net 8 Configuration utility.
Here's a workflow:
1. From the Start button, select Start | Oracle for Windows NT | Oracle Net8 Easy Config
2. When it starts, check Add New Service and in the little box to the right type the name by which you want this connection to be known
3. Click the Next button
4. Select TCP/IP (Internet Protocol) and click the Next button
5. Enter the fully qualified domain name or IP address of the server that contains the database
6. In Port, enter the port number - it defaults to 1521
7. Click the Next button
8.In Database SID enter the name of the database, then click the Next button
9.Click the Test Service button
10. Provide a username and password for an account on the database, then click the Test button
11. If you see: Connecting.... The test did not succeed you got the username/password combination wrong or some other part of the setup
12. When you see: Connecting.... The connection test was successful click the Done button
13. Click the Next button
14. Click the Finish button
You should now have a valid TNSNAMES connection for use by Discoverer 4
Best wishes
Michael

Error while installing Oracle Apps R12 , on windows server 2003 R2

Hi Experts
While installing Oracle Apps R12 , on windows server 2003 R2, I am getting the following error.
System Utilities
command: cmd.exe /c E:\oracle 12i dump\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
'E:\oracle' is not recognized as an internal or external command,
operable program or batch file.
RW-50011: Error: - System Utilities Availability test has returned an error: 1
======================================================================================================================================================================================================================================================================
File Space Check :
-- database node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 0.0
-- apps node space checks --
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP = E:\apps\VIS\apps\apps_st\appl
required = 5800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = E:\apps\VIS\apps\apps_st\appl
required = 2800.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = E:\apps\VIS\apps\apps_st\appl
required = 8400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = E:\apps\VIS\apps\apps_st\appl
required = 3100.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = E:\apps\VIS\apps\apps_st\comn
required = 3200.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = E:\apps\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 0.0
RW-20012: Error: - Free disk space on system returns zero:
     probable cause - mount point does not exist.
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = E:\apps\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 0.0
waiting for expert suggestion.
Thanks
Rahul Srivastava

Hi Hussein
after changing the directory name as Stage12, I am getting error
File Space Check :
-- database node space checks --
Disk space on system acceptable:
Database ORACLE_HOME = F:\oracle\VIS\db\tech_st\11.1.0
required = 5600.0
actual = 200473.43359375
Disk space on system acceptable:
Database System File Directory = F:\oracle\VIS\db\apps_st\data
required = 20200.0
actual = 194873.43359375
Disk space on system acceptable:
Database Log File Directory = F:\oracle\VIS\db\apps_st\data
required = 950.0
actual = 174673.43359375
Disk space on system acceptable:
Database Transaction File Directory = F:\oracle\VIS\db\apps_st\data
required = 103350.0
actual = 173723.43359375
Disk space on system acceptable:
Database Archive File Directory = F:\oracle\VIS\db\apps_st\data
required = 64500.0
actual = 70373.43359375
-- apps node space checks --
Disk space on system acceptable:
APPL_TOP = F:\oracle\VIS\apps\apps_st\appl
required = 5800.0
actual = 5873.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 2 = F:\oracle\VIS\apps\apps_st\appl
required = 2800.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 3 = F:\oracle\VIS\apps\apps_st\appl
required = 8400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
APPL_TOP mount 4 = F:\oracle\VIS\apps\apps_st\appl
required = 3100.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
COMMON_TOP = F:\oracle\VIS\apps\apps_st\comn
required = 3200.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Apps ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.3
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Tools ORACLE_HOME = F:\oracle\VIS\apps\tech_st\10.1.2
required = 1400.0
actual = 73.43359375
RW-20013: Error: - Not enough free disk space on system:
Temp Directory = F:\oracle\VIS\inst\apps\VIS_stccspr01\temp
required = 1024.0
actual = 73.43359375
also for
System Utilities
command: cmd.exe /c E:\Stage12\startCD\Disk1\rapidwiz\bin\adchkutl.cmd F:\cygwin\bin F:\VC\bin
E:\Stage12\startCD\Disk1\rapidwiz>echo off
/cygdrive/c/WINDOWS/system32/cmd
'which' command is available.
/usr/bin/gnumake
'gnumake' is available.
'cl' is not available.
ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
which: no cl in (/usr/bin:/cygdrive/c/WINDOWS:/cygdrive/c/WINDOWS/system32)
RW-50011: Error: - System Utilities Availability test has returned an error: 1
Yes I do have sufficient space i.e . for E: 106 GB and F: 195 GB free space .
Thanks
Rahul Srivastava

How to install Discoverer 11g on Web Logic Server with Forms and Reports 11g Rel2

Hello,
We finally started to migrate from Oracle iAs 10g Release 2 to Oracle Forms and Reports 11g Release 2 using Web Logic. I don't see an option to install Discoverer on the server.
My OS: windows 2008 R2
Installed Web Logic 10.3.6
Forms & Reports: 11.1.2.2.0_64 (64 Bit Forms)
How do I install Discoverer Plus in 11g? All I can find is Discoverer 11g Desktop/Administrator to run on User work Station. We were using discoverer Plus in 10g iAS.
Thanks
Rao

907485 wrote:
Hi:
I need to install oracle 11g from VNC viewer. The VNC is stalled on linux. I managed login. Now I have a screen that has some icons on the top like, Connection Options, "i", refresh, CTRl, ...
under that I have
Accept clipboard from viewers
Send clipboard to viewers
Send primary selection to viewers
From the Connection Options window, I checked Hextile for Use encoding and Let remote server deal with mouse cursor.
What is next? How do I connect to the server. (When I login I used hostname:1)
Thankyou.we only know what you post.
where does linux reside?
where is VNC installed?

How to Install Discoverer and Reports in same Laptop

Does anyone knows how to install Discoverer 4.1 and Reports 9.1 in the same machine?

Hi Ricardo,
Not sure of the Discoverer version. Does Discoverer 4.1 come with Oracle9iAS? If yes, just go ahead and install Oracle9iAS, because Reports9i is part of Oracle9iAS.
If in doubt about the Discoverer version, you might also want to ask this in the Application Server General Forum:
Oracle Application Server - General
Navneet.

Possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

Is it possible to install Oracle EBS R12 on existing (shell) Oracle 11.1.0.7 DB?

user4434301 wrote:
OK...I could be crazy, but I didn't see doing an installation of EBS R12 on a pre-existing 11.1.0.7 DB in there anywhere. It looked like the regular install directions. Are you sure?If you mean to say if you can install R12 with an existing EBS/standalone database then the answer is No.
If you mean to say if you can lay down R12 software (to upgrade from 11i) with an existing EBS database then the answer is Yes.
I hope it is clean now.
Thanks,
Hussein

Installing Discoverer with Database Version Oracle 10g Express Edition

Hello,
Is it possilbe to install Discoverer with database version Oracle 10g Express Edition? I have Oracle Fusion Middleware 11.1.1.1.0 on my Windows XP machine as well. If so, can someone please provide me a link to the Discoverer download.
Regards,
Kelly

Note that the Personal Edition of the database is 'the most powerful' version, in that it contains all features and options of the Enterprise Edition (expect RAC and Enterprise Manager packs)
As such, the Personal Edition, at a mere USD$400-500 is one of the most cost effective for-fee products that Oracle has in it's inventory. It is targeted at the developer. And it comes with the complete set of Sample Data, whereas XE has a very limited subset (since it does not support all functionality).
Express Edition is indeed free, but it is not supported, and can not be patched. OTOH it does have a lighter footprint.
Again, I am not sure whether Disco 11g is compatible with Express Edition. (It's on my schedule for December ...)

Installing Discoverer 4i with Apache

Hi,
Is it possible to install Discoverer 4i with Apache webserver and Jserv as servlet engine? I had been trying it for a couple of times and I fail with oadutil giving me the error message ".exe should be in the path". WHich exe is it referrring to?
I am trying to install 4i on a Win 2K professional machine with:
1. Oracle 8i.
Issue - Since Discoverer wouldnt install in the same directory as 8i, I installed Discovere 4i plus and Discoverer administrator into c:\Oracle as DEFAULT_HOME. I then installed 8i, and 8i wont install in DEFAULT_HOME, hence I installed 8i in c:\Oracle\Ora81 and named it ORACLE_HOME.
2. I installed Apache 1.2 as web server and installed JServ as Servlet engine.
3. I loaded all the client files into home folder.
Please advice.
Thank you in advance.

I got this error when running on win2k. I dont know about 4i, but the documentation for 3i says that it is supported on NT, not 2k. When we loaded NT, this error went away and all has been smooth since.
-matt
null

Post-Install checks - EBS R12 - Ubuntu 804 amd64

Post-Install checks - EBS R12 - Ubuntu 804 amd64
Need help N°2, please.
The window "Post-Install Checks" shows: -----
Validate System Configuration
1 [red X] HTTP
checking URL = http://ubu.mshome.net:8000
RW-50015: Error: HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
2 [red X] Virtual Directory
RW-50015: Error: HTTP Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
3 [red X] Login Page
RW-50015: Error: Login Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
4 [red X] Help Page
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
5 [red X] JSP
checking URL = http://ubu.mshome.net:8000/OA_HTML/help
RW-50015: Error: JSP is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
[Retry]
[< Back] [Next >]

hi
I am getting error with opmnctl the log file contents are
you are running bash version 120.7.12010000.2
bash: too few arguments specified.
*bash start*
You are running bash version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
bash: exiting with status 2
bash: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adapcctl.txt for more information ...
You are running bash version 120.15
The logfile for this session is located at /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adstrtal.log
Executing service control script:
*/media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/admin/scripts/adopmnctl.sh start*
script returned:
You are running adopmnctl.sh version 120.6
Starting Oracle Process Manager (OPMN) ...
adopmnctl.sh: exiting with status 2
adopmnctl.sh: check the logfile /media/Transcend/d01/oracle/VIS/inst/apps/VIS_xxxxx/logs/appl/admin/log/adopmnctl.txt for more information ...
*.end std out.*
*.end err out.*

What option to select to install "Discoverer Administrator"

Hi, I installed Infrastructure 10g. Then I installed Business Intelligence and selected two options, discoverer and report services. Now, I cannot have "Discoverer Administrator" option in the Start Menu. I have Plus and Viewer working.
Pls tell me which option I need to select in order to have "Discoverer Administrator" in My PC.
Or tell me what I should keep in mind while installation so that I can have "Discoverer Administrator".

Hello
You need to download and install Discoverer 10g Developer Suite in order to use the Admin edition. So far you have only installed the web components.
Click here for the download page:
http://www.oracle.com/technology/software/products/ids/index.html
and pick the version you need.
Best wishes
Michael

Trying to install Discoverer 3.1.36.06

on the same machine wich hosts Ora817 enterprise ed. and Oracle Reports.
It refuses to install, says it do doesnt support multiple homes ? and must be isntalled in my ora81 home dir, wich of course also fails, since its allready a home for ora817 and sunch cannot be used for a home for 'nt' ...
What to do ? (besides to run on another machine.. im trying to evaluate this product..)

Search the forum for the topic "I cannot install Discoverer, problem of the OraHome" and you should find the solution to your problem. There are also other postings concerning this issue. good luck.

Install Discoverer in R12

Similar Messages

Maybe you are looking for