Install disk for maverick

where can i get a install disk for maverick. need to re-install os not ready for yosemite

Did you purchase Mavericks prior to the release of Yosemite? If so open the App Store, click on the Purchases icon the toolbar. Locate your Mavericks purchase entry. Try to re-download it.

Similar Messages

Where do I get an install disk for my imac.

Where can I get the install disks for my imac 4,1?

Thanks!
Do you think that there is a downloadable version somewhere?

Install disk for iMac won't install

I have a Mid-2011 iMac which I'm prepping for resale. It had been upgraded to Lion. But, I believe, no further. I cleared the drive and wanted to reinstall the OS and apps. Installing from the DVD got me the grey screen problem. So, I booted into Snow Leopard (the OS it shipped with) from an external drive. Then I tried to install the OS from the DVD which came with the machine. I got the message:
mac os x snow leopard cannot be installed on this computer
How is that possible? It was the install disk for this computer. What can I do?
I tried just installing Lion. That went fine. But, I couldn't install the apps which came with the machine.
Any suggestions?
Thanks!

The licensing issues got real murky (aka complicated) after they went to digital download only as anything obtained at the app store is not transferable and tied to the original Apple ID. So, the system throws up all sorts of ..... If Pages et al was bundled, then no, I don't think it would install as that is filed under the "non-transferable" category I believe. If you had a retail iWork/iLife disk, you should be able to install them (but must include the disks when selling). You may have the wrong disks as well: mine came with 10.6.4 (2010) and so I can't use the retail version as that is 10.6.3. I'll post a screenshot at the end of build/OS numbers.
I did a fair amount of testing on a 2010 iMac (purchased refurb in 2012) with Lion installed and the machine specific SL disks with it. I initially wiped the drive and reinstalled Snow Leopard. I updated the firmware at some point to allow recovery and, from what I've read, that is what is preventing you from being able to reinstall with the SL disk. I know I have the right disks because they worked initially, but I can no longer use them to boot from. So, I rely on bootable clones (which I prefer anyway).
From this:
http://support.apple.com/kb/HT1159#iMac

Install disk for multiple computers

Hi,
My wife just got a new mac book pro today with the Leopard install disk.
I have a mac book pro with Tiger on it. Can I use her disk to install Leopard on my computer, or do I need to buy a separate Leopard install disk for me?
Thanks!

You need to purchase Leopard. Not only are you not legally allowed to use her disk to install on your system it may not work and could mess your system up
Only Family Packs are authorized to install on multiple computers
for purchase information see -- http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MB0 21Z/A
Larry Nebel

Install Disk for Snow Leopard will not boot on an iMac 27in

My Install Disk for Snow Leopard will not boot on my iMac 27in. The Apple Logo is the only thing the user will see. The current OS on the system is 10.6.6. Upon placing the Snow Leopard DVD in the system, the DVD players spins for a few seconds and displays the Apple Logo. Nothing happens after 20 minutes.

Yes, it is ridiculous how it is impossible to install Snow Leopard. I have two Snow Leopard DVDs: one that I purchased for a Macbook soon after it's release (10.6.0), and one that came with my iMac (10.6.4). Both of these boot up my Macbook (running 10.6.7) just fine. My SL 10.6.0 DVD mounts onto my iMac (Lion 10.7.0), but you cannot run the install. I attempted to boot from this DVD and got the infinite white screen and Apple logo, as some have reported above. The other SL 10.6.4 DVD will not even mount in Lion, and will not even show up as a bootable drive when I attempt to select it after holding alt/option on reboot.
I created a bootable external drive from SL 10.6.0, attempted boot, same infinite white screen/apple logo.
I created a bootable external drive from SL 10.6.4 on my macbook. I attempted to boot from this drive, and got the white screen of death, except that this time I actually got the loading symbol underneath the Apple logo. After about a minute of attempting to boot, the Apple logo changed to a circle with a diagonal line through it (the "NO!" sign).
I took my iMac to the genius bar. They inserted SL 10.6.0, which would not boot. Then they determined that my computer had to run 10.6.4 and later. So, they restored an image of SL 10.6.4 onto my partition (not an install from an image, but an image of SL already installed). Hurray! Snow Leopard was successfully shoved onto my iMac!
I then deleted a third partition on my hard drive I did not need anymore, which somehow screwed up my SL partition (even though it said "Will not erase partition SL or Macintosh HD). Now I am back at square one, and I guess I need to take my flippin iMac back to Apple for them to do what I should be able to do.
I like Apple, but sheesh do I hate Lion right now.

Install disk for ps elements 6 won't run on my laptop...what can i do?

The install disk for PS Elements 6 won't run on my laptop. What can I do?

the oldest version of pse available from adobe is pse 7.
so, your options (via adobe) are limited to purchasing pse 12 upgrade for $80, http://www.adobe.com/cart.html?marketSegment=COM&editSku=65224790

Clean install - what's the 3rd install disk for?

Hi all
I did a clean install yesterday on my old G4 and so far so good. It's working much faster and the interet connection is alot stronger.
But....
What is the 3rd Install Disk for?
Have I missed something?
Ta.

Cheers Phil.
Much appreciated!

Where can I download the install disk for powerbook G4

I recently replaced my hardrive because mine stopped working. Now I have found that somewhere along the line over the past 4-5 years I've lost the install disks for my powerbook. I was wondering how I could get my laptop back up and running by maybe downloading software from somewhere? I'm not super savy on computers, but I was told that I would be able to download the software from a site and then be able to start up and install the operating system from my imac. Is this correct, and if yes then how?
Much appreciated

MillerPhotographics:
The new HDD needs to be formatted first. Here are step-by-step directions to get your there:
Formatting, Partitioning Erasing a Hard Disk Drive
Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
• Boot from the install CD holding down the "C" key.
• Select language
• Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select Partition tab in main panel. (You are about to create a single partition volume.)
• Select number of partition in pull-down menu above Volume diagram.
(Note 1: One partition is normally preferable for an internal HDD.)
• Type in name in Name field (usually Macintosh HD)
• Select Volume Format as Mac OS Extended (Journaled)
• Click Partition button at bottom of panel.
• Select Erase tab
• Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
• Check to be sure your Volume Name and Volume Format are correct.
• Click Erase button
• Quit Disk Utility.Open installer and begin installation process.
Installation Process
• Open Installer and begin installation.
• Choose to Customize and deselect Foreign Language Translations and Additional Printer drivers.
• (Optional) Check box to install X11 (Tiger) BSD Subsystems (Panther & earlier).
• Proceed with installation.
After installation computer will restart for setup.
• After setup, reboot computer.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
• Connect to Internet.
Download and install Mac OS X 10.4.11 Combo update (PPC) (Tiger)
Computer will restart.
• Repair Disk Permissions as previously.
• Go to Apple Menu > Software Update.
• Install all updates.
Computer may restart after updates.
• Go to Applications > Utilities > Disk Utility.
• Select your HDD (manufacturer ID) in left side bar.
• Select First Aid in main panel.
• Click Repair Disk Permissions.
Please read through directions and be sure you understand it, and do post back with questions about anything that is not quite clear.
Good luck.
cornelius

Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for maintenance.

My 2011 MBP has begun running slow with frequent 'spinning beach ball' events. I'm running Yosemite and wondered if I should of use the original install disk for a maintenance reinstall. I presume I'd have to download Yosemite again, though I'd be happy just using Snow Leopard again too.
Thanks for the help.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Why didn't my new imac come with an install disk for 10.7??

why didn't my new imac come with an install disk for 10.7??

New Macs shipping with Lion, no longer have Install Discs...
See Here
http://support.apple.com/kb/HT4718

How can I make an install disk for iTunes?

I need to update iTunes but I cannot get the download to complete. The connection has been confirmed as stable so it doesn't appear to be a system issue. If I make an install disk for the current version of iTunes on another PC, I should be able to install it. The download doesn't give options to save to a disk. How should I go about this?

The download doesn't give options to save to a disk
Go to the following webpage and click the "Download" button, and then click the "Save" button:
http://www.apple.com/itunes/download/
... once the iTunesSetup.exe (installer) file has downloaded, then copy the iTunesSetup.exe file across to your CD (or even a large-enough thumb drive or something similar). Copy the iTunesSetup to your PC from the CD or thumb, and start the install by doubleclicking on the file.

Is there any way to check a software install disk for damage?

Is there any way I can check a DVD software install disk for damage?

Yes the disk, at least the main one, is O.K. I guess what I'm trying to determine here is whether or not my Logic Pro Studio install disks are corrupted in any way because, on my system Logic behaves in quite a glitchy manner, something that other Logic users (at least on the Logic Forums) are not experincing. I've narrowed it down to a software issue but I've yet to detemine if this is an OS problem, a Logic problem or something else. What mitigates against the idea that this is an OS problem is that anything other than Audio programs on my system runs fine. But audio programs, particularly Logic, are having problems. A reinstallation of Logic solved nothing which is why I suspected that there may be something wrong with the program install disks. But the program does install and it does 95% of what its supposed to do. The disks are clean and have no scratches.

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks?

Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks? https://discussions.apple.com/message/23527458#23527458

You should just be able to erase it using Disk Utiilty. I did with my 8Gb.
If not I have a USB deep format tool, but it only works with Windows: http://tinyurl.com/mwor6s9
You can download that and unzip it, then run it on a PC to fully erase and format the flash drive. Format it in FAT, and then the Mac will read and mount it so you cna once again format it with HFS extended for Mac use.

If i dont have original install disks for my macbook pro 2009 can i create one?

if i dont have original install disks for my macbook pro 2009 can i create one?

No, but you might be able to purchase replacements:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site.

Install disk for maverick

Similar Messages

Maybe you are looking for