Install dreamweaver on new computer with original .dmg?

Hi, I have Dreamweaver CS3 on a computer (Mac, running OSX Tiger) that I will be replacing with an iMac running Snow Leopard. My license is well within the 3 year limit--actually, less than 2 years. But the link on my order history is nonfunctional, and after 2 hours on line with Adobe, they tell me they will not be able to let me download again. They want me to upgrade (would be nice, but I can't afford to do right now, plus that is irrelevant to my license!) The question is:  I have the original .dmg file still on my computer. Could I use this to put Dreamweaver on my new computer?  Thanks for the help!

A .dmg file is a disk image. One mounts the disk and it acts as a virtual drive. You should have no problems with the installation, assuming you are not required to type in a license number or you have the license number for your Adobe product.
Essentially, what you are doing is moving the application to another computer and this is entirely within the scope of your license.
What you need to do on the computer you are retiring is deactivate the copy on the outgoing computer.
Then just install on your new one from your .dmg file.
Type in the serial number.
Activate.
Use.

Similar Messages

  • I have Adobe 5.0, original disk, 6.0 upgrade, original disk, and Adobe CS2. I'd like to install in my new computer with Win.8.1. Can you help?

    I have Adobe 5.0, original disk, 6.0 upgrade, original disk, and Adobe CS2. I'd like to install in my new computer with Win.8.1. Can you help?

    Forget about all the versions you already have (5.0 through to CS2). They will no longer work and the serial numbers are redundant.
    Download the non-activation version of CS2 form the link provided by kglad and use the new non-activation serial number provided at that link. Your existing serial number(s) will no longer work.
    Note: there is no guarantee that CS2 will run well on Win 8.1. Try it and see.

  • Unable to install itunes for new computer with windows 8

    unable to install itunes for new computer with windows 8
    states this app unable to run on this PC

    Hello jgrn76,
    It sounds like you are getting an error stating that the iTunes installer cannot be run on your computer. I would try downloading the 64 bit version of iTunes from here:
    iTunes 11.1.3 for Windows (64-bit)
    http://support.apple.com/kb/DL1615
    If issues persist when trying to install it, I would try running through the steps in the article named:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Otherwise, would you mind elaborating a bit on what the error message says, word for word?
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • Okay to Install Dreamweaver on new computer when one crashes?

    The computer Dreamweaver was installed on crashed. Can I now install it on my new computer using the serial number from the Dreamweaver CS5.5 CD?

    If it was only installed on one machine in the past, you can install and activate without issue on a second machine.
    If it has been installed and activated on two machines previously (Adobe licenses allow two installs at the same time) you would need to deactivate one. You "might" need to contact Adobe customer support if it won't activate.

  • How to install PSE11 on new computer with no disc drive?

    I previously purchased Adobe Photoshop Elements 11 on disc but my new computer does not have a disc drive, how can I install it?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    Photoshop/Premiere Elements 11:
    http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  • How to re-install CS4 on new computer with out cd drive?

    How do I transfer my CS4 to my new computer?  The new computer does not have a place to put the CD?

    Download a trial version from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    Follow the Very Important Instructions (steps 0 to 6) on that page first BEFORE you click the download links.
    Install then enter your serial number to license it.

  • Installing iTunes on new computer with library on external HD

    I have my library on an external HD and have been using it with my laptop. Well the laptop is dead and I'm wanting to start using my mini. I downloaded iTunes, authorized the computer, signed in, plugged in the external HD and changed the pathway of the media folder location to the folder where the library is on the external HD (under the advanced tab of preferences). iTunes still does not "see" the library. What else do I need to do? I really do not want to copy it over to the computer's HD, I'd like to continue using the external HD since it has 1TB.
    Thanks so much for the help.

    Launch iTunes with the Shift key held down, click on Choose Library, and point it there. If only the iTunes media was stored on the drive, open the Advanced section of its preferences, ensure it's not going to copy the media to the internal drive, and drag the iTunes media folder into the open iTunes application window.
    (57458)

  • I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    I would like to transfer all data from my iPod classic to my new computer with windows 8.1. My old computer's cpu died. Utilizing iTunes which only allows iTunes albums purchased at iTunes store. The cd's were loaded via iTunes originally.

    Install disk drive from old computer in an external enclosure.
    Then copy the complete iTunes library from the disk drive to the disk drive in the new computer.

  • Install iwork '05 on a new computer when original computer no longer in use

    I would like to use my copy of iwork '05 on another computer. The computer it was originally installed on is no longer in use. Can I do this, and how??? Thanks!

    Then you can install iWork '05 on the new computer with a clear conscience. Obviously, the previous install is unusable.

  • When trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    JJMack <[email protected]> wrote:
    =============
    JJMack  created the discussion
    "when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
    To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

  • Got new computer with windows 8.1 and installed latest itunes and hooked up nano 5th gen ipod to update music librarie but wont sync what would problem be?

    Got new computer with windows 8.1 and installed latest itunes, went to update music library on my nano 5th gen and plugged in recognized in my library but when it synced , it said sync was complete but did not update at all, then reset the ipod to factory , BIG MISTAKE  plugged in again and it did the same thing except now I have no music on at all it syncs but will not put any music on , previous computer had xp on it, what would the problem be and what would solution be????
    Thanks

    c) unistalled and reinstalled iTunes
    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • How to install Adobe Flash Player plug in on my new computer with Windows 8.

    How can I install Adobe Flash Player which does not have a plug in on my new computer with Windows 8.  The instructions tell me that Flash Player is embedded in my Internet Explorer but all my choices for playig videos say no plug in is installed.

    See: http://forums.adobe.com/thread/885448
    If that fails,
    Download the Adobe Flash Player installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)

  • I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?

    I own CS6. I just built a new computer with Win-7. How do I change to the 64 bit version and install on the new computer?
    Lance

    download the installation file(s) and activate with your serial number,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.<

  • I have LR4 already installed and a new disc with LR5 on it (never activated - have serial number).  I do not have a drive on my computer to install from the disc.  How do I go about upgrading to LR5?

    I have LR4 already installed and a new disc with LR5 on it (never activated - have serial number).  I do not have a drive on my computer to install from the disc.  How do I go about upgrading to LR5?

    Download the installation file(s) and use the serial number you have to activate it. 
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • I get a message "could not initalize scratch disk full" I hae a new computer with Win 8 and I am installing PS 7

    I get a message "could not initalize scratch disk full" I have a new computer with Win 8 and I am installing PS 7. how can I fix the scratch disk problem? Thank you for the help.

    Are you saying that the Installation failed, or that Photoshop has installed but won't open?
    You say Photoshop PS7.  Is that a typo, or do you really mean the version that was released in 2002 and that preceded Photoshop CS?
    http://en.wikipedia.org/wiki/Adobe_Photoshop_version_history#7.0
    If you do indeed mean PS7, then I am afraid that is not compatible with Windows 8.1
    Windows Compatibility Center

Maybe you are looking for

  • 20" acrylic Display not working with 15" MBP

    I have a 20" acrylic Cinema display (with the Apple ADC-DVI adapter) that works fine with a PC and with my 15" G4 PowerBook. When I try to use my 15" MacBook Pro (the 512meg VRAM one) the internal screen flashes but the Cinema display never shows any

  • Acrobat 9 Pro hangs when moving or resizing stamps

    I've had this issue on two different machines running Windows 32 and 64 bit OS. Document opens fine and you can scroll around and perform operations. Until you put a stamp on it. Everything slows way down but doesn't quite stop. You can't resize or m

  • Idoc Configuration

    Hi everybody, I have a scenario Idoc to Web Service. All configurations are ok (SM59, IDX1, IDX2, WE21,WE20, BD64) but I send from R3 an Idoc with status 03 and in Sap XI y can't see it in IDX5. SMQ1, SMQ2 and SM58 are empties In BD87 transaccion it

  • Gamut warning preview in Camera Raw?

    I'm running Photoshop CS4 Extended v. 11.0 on Mac OS X 10.5.6. Having marvelled at the tools in the new Camera Raw I have found gamut problems for CMYK print files once in Photoshop - is there a gamut preview in Camera Raw so I can save having to pos

  • MAC application:#PKCS#11 support ECC

    We have our PKCS#11 library developed which supports ECC(elliptic curve cryptography)(ECDSA/ECDH). Is there any application in MAC which can use our PKCS#11 library with ECC support to perform cryptographic operations. Regards Manish K Chauhan