Install drive error
Acrobat X installer (from DVD) apparently has a default drive which probably cannot be a network share. I am trying to install and it kicks back an error concerning my H: drive which is my network share. How can I get it to install on C: or D:?
Thanks,
Ken
Did you ever install any other Adobe products from this network drive and/ or while this drive was at least connected? This kind of information being sticky usually points to something like that. The bad news is, that you probably will have to uninstall everything and reinstall from scratch including runng the Creative Suite Cleaner Tool. Other than that you could comb the Windows Registry and find the relevant key, but this could be hairy, as this must not at all be the basic install information, but a key specific to only a single CAB/ MSI file...
Mylenium
Similar Messages
-
Due to flash drive error on MBA my drive was wiped yesterday and OS re installed. How to I get my bookmarks still on my iPhone back onto the mba
Hi Nathanbeyondme!
I have an article that can help you with that question:
OS X Mountain Lion: Store your content in iCloud
http://support.apple.com/kb/PH11421
Safari bookmarks and tabs
iCloud keeps your bookmarks and Reading List the same in Safari on your Mac, iPhone, iPad, and iPod touch. On your Mac, Safari also uses iCloud to let you open tabs that are open on your other devices. You set up the Safari service in iCloud preferences.
If you are having issues with syncing these bookmarks, you will want to reference the following article:
iCloud: Troubleshooting iCloud Bookmarks and Reading List
http://support.apple.com/kb/ts4001
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Install problem Error with Z drive
Our IT guys configure our machines with a Z drive as a network share. Any ideas how to resolve the conflict with PE9 install.
Thanks
DavidI did not pick the Z drive for install. I always pick the C drive if given the option. But PE9 just went to work on its own and told me it could not install to the Z drive... there is a known issue posted here along these lines, however, so I think Adobe is on to it... of course i had to install as a trial version on a second machine to test the disk burning...then I have to solve the install problem, so I can install the license on the machine with the install problem.... all a big catch 22. Here's the link on the install issue... I get the 1327 invalid drive error:
http://kb2.adobe.com/cps/404/kb404946.html
Thanks
David -
Error installing Driver for audio device in MS-6585 Motherboard
Hi,
I have MS-6585 Max L motherboard. I installed windows 2000 with SP4. When I tried to install driver for the audio device, it always fails with the following error.
An error occurred during the installation of the device.
The data is invalid.
And in the Device status in the properties menu
The drivers for this device are not installed. (Code 28)
I tried to download the latest driver using the "Live Update" and it didn't help. I tried few other options suggested in the web.
The usual cause of this problem in Windows 2000/XP systems is Registry keys that are set as read-only.
From the Start menu, click Run and enter RegEdit to run the Registry Editor. Open the following - Keys => HKey_Local_machine => System => CurrentControlSet => Enum => PCI.
You will see several keys in this form - Ven_xxxx - where xxxx represents a string such as - 1102&Dev_004&Subsys_00011103&Rev_04.
In each of these folders there is another folder that has a long numerical name. Open each of these folders, and look for the DeviceDesc entry that matches the type of hardware that you are trying unsuccessfully to install. Use the right mouse button to click on the Ven_xxxx entry for that device, and click Permissions. If it is set to read-only, then that is the cause of the problem. To rectify it, change it to Allow Full Control.
I'm stuck and I am not sure what else to try. Its not clear to me where the problem is. Is there any log I can look? Any other suggestions please
BTW, It used to work..I had to reinstall windows 2000 and after the clean/format reinstallation it stopped working.
thanks for any help
SureshIt might be that the drivers are for WinXP. Are you 100% sure they are for 2000? Can you get a copy of XP, it would prabobly solve youre problem.
-
I have done all the steps that I could find, and I am still having this issue...can someone help me please?
Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Dell Inc. Inspiron 1525
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver Not Available
CD Driver DLL Not Available
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00D5BEA809F38F28
Current user is an administrator.
The current local date and time is 2014-04-05 12:39:11.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
Description: Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
IP Address: 192.168.0.16
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Sat Apr 05 12:21:08 2014
Lease Expires: Sat Apr 05 13:21:08 2014
DNS Servers: 68.105.28.12
68.105.29.12
68.105.28.11
Adapter Name: {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
Description: Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-04-05 12:38:45.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0),
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
**** Device Connectivity Tests ****
iPodService 11.1.5.5 is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPod touch (4th generation) running firmware version 6.0.1
Serial Number: CCQH8BRSDT77
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.CD Driver Not Available
CD Driver DLL Not Available
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install -
Ran Apple Hardware Test from USB Install Drive on new MBA, Got this error
Last week I got the fully loaded 2010 MBA 13" (2.13ghz/4gb/256gb).
It's just perfect, I have no problems with it.
On a whim, I ran the quick Apple Hardware Test using the included USB install drive (took just a few minutes) and it came up with this:
Alert! Apple Hardware Test has detected an error.
4SNS/1/40000001:IDOR-0.040
Screenshot:
http://img811.imageshack.us/img811/9800/2010macbookairhardwaret.jpg
Any ideas on what that means? Hopefully it's a false positive. I'm running the extended test right now, which will take more than an hour. Will report back.
Anyone seeing anything from the hardware test?jonm8 wrote:
Last week I got the fully loaded 2010 MBA 13" (2.13ghz/4gb/256gb).
It's just perfect, I have no problems with it.
On a whim, I ran the quick Apple Hardware Test using the included USB install drive (took just a few minutes) and it came up with this:
Alert! Apple Hardware Test has detected an error.
4SNS/1/40000001:IDOR-0.040
Screenshot:
http://img811.imageshack.us/img811/9800/2010macbookairhardwaret.jpg
Any ideas on what that means? Hopefully it's a false positive. I'm running the extended test right now, which will take more than an hour. Will report back.
Anyone seeing anything from the hardware test?
I think this will solve your issue:
http://support.apple.com/kb/TS3578?viewlocale=en_US -
Itunes install issues error 7 - Windows error 193
Gents,
I am using Windows 7, had iTunes for years no issues I couldn't solve myself, this time I need help.
When the last update of iTunes came on, I tried to update my version but couldn't do the update (I don't remember the error message details, it just said that I had to re-install iTunes).
So I cleared ITunes and all Apple related softwares from my computer (yes in the recommended order, and yes I rebooted in between) tried to re-installed (numerous times) and I always get the same error messageS:
"Couldn't install ITunes Error 7 (Windows error 193)" and also "ITunes helper was not installed correctly"
When running the installer I get the error message "Apple Mobile device failed to start", even if I ignore this message during the install, I am unable to open iTunes once the install is done. (the install goes through and says install finished).
Note: I also tried to "fix" during the install, it didn't work.
Context / Trials / Notes:
- I tried to "repair" the Apple Mobile Device in programs (unsuccessfully)
- I had 2 Apple Mobile Device services, so after a complete un-install and reboot, I manually (command prompt) remove the last service
- In all my un-install attempts I went on the C: drive and made sure ALL folders were cleared of apple / iTunes traces. Delete ITunes setup file, empty the recycle bin of course, reboot etc)
- Windows is up-to-date - No viruses (using Malwarebyte/ AVG & Spybot).
I am at a loss, spent a lot of hours on the computer and on forums, but couldn't find the fix.
I would greatly appreciate your help, this is getting on my nerves and I really need to change the music on my iphone ! (lol)
thank you in advanceIf the above hasn't helped then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Disabling your AV during installation may sometimes help.
tt2 -
No Driver Error when including Traditional DAQ in CVI 9.0 Distribution Kit
I have some legacy code (CVI 6.0) that I wanted to upgrade recently. The biggest reason was the ability to add the device drivers to the distribution kit. When I installed the software on a new machine I got a No Driver Error when doing a CounterStart call . In the past that error meant that I had not included CVI support when I installed Traditional DAQ. Since it was installed as part of a distribution kit I can't see what elements were installed. I assume since it was included as part if a CVI distribution kit that CVI support is automatically. How can I get rid of the no driver error?
Thanks,
CP
Solved!
Go to Solution.Hi, Clutch
try this, build->distribution->managing distribution -> build step. and in drivers&components Table, you can select the driver you want to include.
see graph below
hope this can help !
B.R
Gerry
Attachments:
kits.JPG 116 KB -
GDI/Driver error in rendering - XP Service Pack 2
Hi There
We are having an issue with XP SP2. After the installation, ip based
printing worked fine, but Queue based print broke.
Broke: -Print jobs sit in local machine queue. Windows system event logs
return the following errors in order.
1.) Document failed to print due to GDI/Driver error in rendering.
2.) The description for Event ID ( 6161 ) in Source ( Print ) cannot be
found. The local computer may not have the necessary registry information
or message DLL files to display messages from a remote computer. You may be
able to use the /AUXSOURCE= flag to retrieve this description; see Help and
Support for details. The following information is part of the event:
Microsoft Outlook - Memo Style, USERNAME, HP LaserJet 2300 Series PCL 5e,
NT EMF 1.008, 65536, 0, 1, 0, \\COMPUTERNAME, 2 (0x2), .
We have the following system configs:
Windows XP SP2 - All current hotfixes (Installed in batch after SP2 install
via ZENWorks)
Novell Client 4.9.0
We tried to upgrade one of the affected machines to the latest Client, with
no effect. Note that IP based printing works fine.
Any ideas?
Thanks,
HenryCapture is done via a print group, which uses capture.exe on logon. The odd
thing which came up in testing yesterday is this:
User logs on gets LPT1 :PrinterX
User cannot print to PrinterX gets event log errors
Install 2nd printer driver on LPT2
Using "Capture printer port" via Big Red N, capture LPT2 to PrinterX (same
Queue)
Print to LPT2 works fine.
Retry of LPT1 still gets event log errors
Delete Capture of LPT1, recapture LPT1
User cannot print to LPT1
User has full admin rights to workstation, upgraded video drivers, and the
latest printer driver from HP. (was using an older one before)
I am stumped.
-Henry
> How is the capture actually done? Using CAPTURE.EXE or via the C32
> properties? Have you tried to delete the capture, restart the
> workstation, and recapture?
>
> --
>
>
> Peter
> eDirectory Rules! -
Rapid install gettin error when create control file
hai all ,
i faced problem when im install fresh ebs R12
my environment :
sun sparc 64 bit
solaris 11
this occur when i try to install fresh R12
using rapidwiz , the error say ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
and when creating control file failed,
is any clue with this problem ?
all prerequisite reference to doc :
R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1)
the detail log below this
Log file located at /oracle/PROD/db/tech_st/11.1.0/appsutil/log/PROD_SMJKT-PRFND01/ApplyDatabase_11071358.log
^M
| 0% completed ^M
/ 0% completed ^M
- 0% completed ^M
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORA-00821: Specified value of sga_target 1024M is too small, needs to be at least 2100M
ORA-01078: failure in processing system parameters
CREATE CONTROLFILE REUSE SET DATABASE "PROD"
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0
alter database open resetlogs
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 0
Session ID: 0 Serial number: 0hai asif,
solved my problem , with this doc
Oracle VM Server for SPARC (previously known as LDoms or Logical Domains) :
To set the number of VCPUs for a given Logical Domain (LDom), use the 'ldm(1M)' with the 'set-vcpu' option:
# /opt/SUNWldm/bin/ldm set-vcpu <number> <logical_domain>
For example to configure eight VCPUs for the Logical Domain named "ebs1":
# /opt/SUNWldm/bin/ldm set-vcpu 8 ebs1
Please review the Logical Domains Administration guide for detailed information.
Users can then revert the number of VPUs to the original or desired values as a post EBS install step.
thanks a lot..
regards
Imrons -
Data recover from a hard drive error 301
Can anyone advise me of how to recover data from a hard drive error 301. I have a pavilion dv7-4177 and i received the hard drive error code 301 two weeks after the warranty expired. I back up my data so I though but when tried to reload that data on a new hard drive it would not take. The damage hard drive will not load the OS now even in safe mode. Is there any way to retrieve this data from that hard drive.
Hi,
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Recurring Hard Drive Errors/Crashes After Replacing Repeatedly
I've got a 2007 2GHz Macbook. I've been having repeated hard drive errors for the past few months. First the original hard drive went 100% dead. I replaced it with a Hitachi 350 Gig. After repeated serious hard drive crashes and reformats, I replaced it again with a brand new Western Digital 350 Gig hard drive. However, I am having continued problems with this one now, Invalid Extent entries every couple days, and major errors if I don't run disk utility every other day.
This is leading me to believe that the issue isn't related to the hard drive since I've had similar problems three times in a row. Has anybody else encountered this? Could the problem be elsewhere?+I'm assuming that's a bad ram module, am I correct?+
Perhaps, but I'm sorry to report there is much uncertainty about this. See the search of these boards I've added at the bottom, and refer to each listing and its resolution (if reported).
There is usually a "Details" section of the Apple Hardware Test report about the memory - did you see that section of the results?
If not seen, or if it was not reported, open the utility "System Profiler" and look at the "Diagnostics" section to see general results of that last AHT which you ran, and also you should see there the latest results of the "Power On Self-Test" that runs each time a Mac starts up. The normal "Result" for both lines reads: "Passed"
Also check the "Memory" section of System Profiler to see the size, type, speed and "Status" of each individual memory module - your MacBook should have two modules in it, and the "Status" report for each should be "OK"
If your Mac is not covered by AppleCare, it's probably best to use a process of elimination to find the source of the problem.
Are you using your MacBook without an external keyboard and mouse? Those might possibly be the cause of a problem, if connected.
As long as you have the original grey-label Install Disc in the optical drive, your MacBook will startup without a hard drive inside, as the Install Disc contains all the operating instructions that are necessary for the MacBook to operate the Install Disc and everything on it.
It is easy to remove the internal hard drive to eliminate a potential problem source. If corruption of the hard drive is a repeated issue, it would be best to eliminate this hard drive from the mix for testing purposes.
Just as important, as long as you have the original grey-label Install Disc that contains the AHT, the MacBook will startup to the Apple Hardware Test by pressing and holding the d key, again without a hard drive installed.
It is very easy to remove RAM modules from a MacBook for visual inspection to see what markings are on the labels as to size, type and speed. Verify that System Profiler is reporting the same info as is marked on the labels.
Assuming everything is as it should be, replace one module, close up the Mac, and after starting up to the Install Disc, check what the utility "System Profiler" is showing in the "Memory" section of its limited System Profiler. If the Mac starts up cleanly and System Profiler reads "OK" move that module to the other memory slot and same procedure.
If the Mac again starts up cleanly to the Install Disc and System Profiler again reads "OK" next startup from and run the Apple Hardware Test with only that one module to see if it gets a clean bill of health.
If it's ok, then remove that module and set it aside as being a tentatively "known good" module.
Repeat all on the second module by it's self. At this point, you should probably have learned which module is bad - however, if not, go through it all again with both modules installed.
Hopefully by the end, you will have determined a resolution that doesn't cost an arm and a leg to correct, such as replacing the logic board. Good luck with it:)
Message was edited by: myhighway
http://discussions.apple.com/search.jspa?threadID=&q=4MEM%2F4%2F40000000&objID=& dateRange=all&userID=&numResults=30&rankBy=10001 -
Hi, this morning I installed last upgrade of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware (I checked, everything was up to date nd correctly working) and Photoshop didn't respond; internet stopped to work too.
The only way was to uninstall The CC App and create a restore point after uninstalling (It wasn't possible restore a previous one BEFORE the upgrade of this morning....)
My Processor is Intel(R) Core(TM) i7-4500U CPU @ GHz 2.40 GHz
RAM is 8GB
What do I have to do?
Reinstall it without upgrading it?
I would really appreciate that upgrades would be tested before being released.... -_-Moving this discussion to the Photoshop General Discussion forum.
-
Problems with Vista installing driver for
Just bought the 6 G ZEN and have installed the supplied software for the device and when I connect the device to the PC Vista starts to Install Driver Software. I then get an error message 'Device driver was not installed successfully, please consult manufacturer for assistance getting this device installed.'
I also tried downloading the updated software from?the Creative website?and installing this on my PC, however I get the same error message.
When I go in to the control panel and to the device manager, there are two new portable devices with errors:
. Creative ZEN, with error message: 'Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 9)'
2. Unknown device, with error message: 'This device is not configured correctly. (Code )'
Hope somebody can help me out with this. (I tried to send this message to support by completing the online email form, however upon submitting the form (URL: http://dmzrespapp.europe.creative.com/kana/FRH) I get a screen saying Internet Explorer cannot display the webpage)i'm afraid the issue could be due to the pc as the nati've driver on the vista computer might be corrupted.
but to confirm that, you can access to recovery mode to do clean up to have a try.
also you can still upgrade the latest firmware on the xp computer to see the results.
i hope the above can help you. -
ETL Tasks failing Database driver error...Function Name : Execute Multiple
HI,
We have Installed OBI Apps V796. Below are the details.
OBI Apps V796
OBIEE 10.1.3.4.1
DAC 10.1.3.4.1
Informatica 8.6.0
We are getting the below error for the task "SDE_ORA_PartyPersonDimension_Customer" when we run the execution plan related to supply chain and order management analytics.
Severity Timestamp Node Thread Message Code Message
ERROR 6/23/2009 8:25:54 PM node01_obiee WRITER_1_*_1 WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) ".
As a work around we tried by changing the Target load type option to normal(previously it is bulk) and still the task failed. Also tried by enabling the Constraint based loading option and still the tas got failed.
Any suggestions............
As
Regards
Venkatesh.Exactly same problem I'm also facing. The log is not showing any exact error information for the cause. And the surprise thing is when i'm running the debugger its inserting all the records. But when i run the task it is failing. Here is the log.
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [ORA_11_5_10.DATAWAREHOUSE.SDE_ORA11510_Adaptor.SDE_ORA_PartyPersonDimension_Customer_Full.log] for session parameter:[$PMSessionLogFile].
DIRECTOR> VAR_27028 Use override value [4] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint1].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$Hint2].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_ORA_PartyPersonDimension.$$LAST_EXTRACT_DATE].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_ORA_PartyPersonDimension_Customer_Full] at [Mon Dec 28 19:10:26 2009].
DIRECTOR> TM_6683 Repository Name: [AA_REPOSITORY_SERVICE]
DIRECTOR> TM_6684 Server Name: [AA_INTEGRATION_SERVICE]
DIRECTOR> TM_6686 Folder: [SDE_ORA11510_Adaptor]
DIRECTOR> TM_6685 Workflow: [SDE_ORA_PartyPersonDimension_Customer_Full] Run Instance Name: [] Run Id: [1371]
DIRECTOR> TM_6101 Mapping name: SDE_ORA_PartyPersonDimension_Customer [version 1].
DIRECTOR> TM_6963 Pre 85 Timestamp Compatibility is Enabled
DIRECTOR> TM_6964 Date format for the Session is [MM/DD/YYYY HH24:MI:SS]
DIRECTOR> TM_6703 Session [SDE_ORA_PartyPersonDimension_Customer_Full] is run by 32-bit Integration Service [node01_obiee], version [8.6.1 HotFix6], build [0622].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [UNICODE]
MAPPING> CMN_1570 Server Code page: [UTF-8 encoding of Unicode]
MAPPING> TM_6151 The session sort order is [Binary].
MAPPING> TM_6185 Warning. Code page validation is disabled in this session.
MAPPING> TM_6156 Using low precision processing.
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM error log disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [BIDB], user [AABAW]
MAPPING> CMN_1716 Lookup [Lkp_W_ORA_PARTY_CONTACT_PS] uses database connection [Relational:DataWarehouse] in code page [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [IIF(ISNULL(CONTACT_PARTY_ID||DATASOURCE_NUM_ID), '', 'Contact')]; transformation continues...
MAPPING> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:26 2009]
MAPPING> TE_7004 Transformation Parse Warning [<<PM Parse Warning>> [||]: operand converted to a string
... IIF(ISNULL(CONTACT_PARTY_ID||>>>>DATASOURCE_NUM_ID<<<<), '', 'Contact')]; transformation continues...
MAPPING> TM_6007 DTM initialized successfully for session [SDE_ORA_PartyPersonDimension_Customer_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Mon Dec 28 19:10:26 2009)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Mon Dec 28 19:10:26 2009)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 12582912 bytes and Block size is 128000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [DEV01], user [apps]
READER_1_1_1> BLKR_16051 Source database connection [ORA_11_5_10] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8146 Writer: Target is database [BIDB], user [AABAW], bulk mode [ON]
WRITER_1_*_1> WRT_8106 Warning! Bulk Mode session - recovery is not guaranteed.
WRITER_1_*_1> WRT_8221 Target database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL INSERT statement:
INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL UPDATE statement:
UPDATE W_PARTY_PER_DS SET PARTY_TYPE = ?, FST_NAME = ?, FULL_NAME = ?, MID_NAME = ?, LAST_NAME = ?, DEPARTMENT_NAME = ?, CONTACT_ID = ?, CONTACT_TYPE = ?, FAX_PH_NUM = ?, PAGER_NUM = ?, MOBILE_NUM = ?, WORK_PHONE = ?, SEX_MF_CD = ?, ETHNICITY_CD = ?, MARITAL_STAT_CD = ?, BIRTH_DT = ?, BIRTH_PLACE = ?, DEATH_DT = ?, ST_ADDRESS = ?, CITY = ?, STATE = ?, ZIPCODE = ?, COUNTRY = ?, EMAIL_ADDR = ?, JOB_TITLE = ?, ANNL_INCOME = ?, CON_ACTIVE_FLG1 = ?, SUPPRESS_EMAIL_FLG = ?, PROF_TITLE = ?, STATUS_CD = ?, ST_ADDRESS2 = ?, ST_ADDRESS3 = ?, ST_ADDRESS4 = ?, CREATED_BY_ID = ?, CHANGED_BY_ID = ?, CREATED_ON_DT = ?, CHANGED_ON_DT = ?, AUX1_CHANGED_ON_DT = ?, AUX2_CHANGED_ON_DT = ?, AUX3_CHANGED_ON_DT = ?, AUX4_CHANGED_ON_DT = ?, SRC_EFF_TO_DT = ?, DELETE_FLG = ?, TENANT_ID = ?, X_CUSTOM = ?, CUSTOMER_NUM = ? WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8124 Target Table W_PARTY_PER_DS :SQL DELETE statement:
DELETE FROM W_PARTY_PER_DS WHERE SRC_EFF_FROM_DT = ? AND DATASOURCE_NUM_ID = ? AND INTEGRATION_ID = ?
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PARTY_PER_DS]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> RR_4029 SQ Instance [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] User specified SQL Query [SELECT b1.party_id, b1.party_type, b1.person_name, b1.person_first_name, b1.person_middle_name, b1.person_last_name, b1.status, b1.phone_area_code, b1.phone_number, b1.address1, b1.address2, b1.address3, b1.address4, b1.postal_code, b1.city, b1.state, b1.country, b1.email_address, b1.date_of_birth, b1.place_of_birth, b1.date_of_death, b1.gender, b1.declared_ethnicity, b1.marital_status, b1.person_title, b1.personal_income, b1.do_not_mail_flag, b1.created_by, b1.creation_date, b1.last_updated_by, b1.last_update_date1 last_update_date, b1.last_update_date2 last_update_date, b1.last_update_date3 last_update_date, b1.party_number, b1.ACCNT_FLG FROM (SELECT per.party_id, pty.party_type, per.person_name, per.person_first_name, per.person_middle_name, per.person_last_name, pty.status, cnp.phone_area_code, cnp.phone_number, pty.address1, pty.address2, pty.address3, pty.address4, pty.postal_code, pty.city, pty.state, pty.country, pty.email_address, per.date_of_birth, per.place_of_birth, per.date_of_death, per.gender, per.declared_ethnicity, per.marital_status, per.person_title, per.personal_income, pty.do_not_mail_flag, per.created_by, per.creation_date, per.last_updated_by, per.last_update_date last_update_date1, pty.last_update_date last_update_date2, cnp.last_update_date last_update_date3, pty.party_number, (CASE WHEN acct.PARTY_ID IS NOT NULL THEN 'Y' END) ACCNT_FLG, MAX (per.person_profile_id) OVER (PARTITION BY per.party_id) max_person_profile_id, per.person_profile_id FROM hz_person_profiles per, hz_parties pty, hz_contact_points cnp, (SELECT a1.party_id, COUNT (1) cnt FROM (SELECT per.party_id FROM hz_person_profiles per UNION ALL SELECT pty.party_id FROM hz_parties pty UNION ALL SELECT --/*+ use_hash(pty cnp) index_ffs(pty, hz_parties_u1)*/ pty.party_id FROM hz_parties pty, hz_contact_points cnp WHERE pty.party_id = cnp.owner_table_id ) a1 GROUP BY party_id) TEMP, hz_cust_accounts acct WHERE per.party_id = TEMP.party_id AND per.party_id = pty.party_id AND pty.party_id = cnp.owner_table_id(+) AND cnp.owner_table_name(+) = 'HZ_PARTIES' AND cnp.contact_point_type(+) = 'PHONE' AND cnp.primary_flag(+) = 'Y' AND acct.PARTY_ID(+) = pty.PARTY_ID) b1 WHERE b1.person_profile_id = b1.max_person_profile_id HAVING COUNT (1) >= 0 GROUP BY b1.party_id, b1.party_type, b1.person_name, b1.person_first_name, b1.person_middle_name, b1.person_last_name, b1.status, b1.phone_area_code, b1.phone_number, b1.address1, b1.address2, b1.address3, b1.address4, b1.postal_code, b1.city, b1.state, b1.country, b1.email_address, b1.date_of_birth, b1.place_of_birth, b1.date_of_death, b1.gender, b1.declared_ethnicity, b1.marital_status, b1.person_title, b1.personal_income, b1.do_not_mail_flag, b1.created_by, b1.creation_date, b1.last_updated_by, b1.last_update_date1, b1.last_update_date2, b1.last_update_date3, b1.party_number, b1.ACCNT_FLG]
READER_1_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:26 2009)
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Mon Dec 28 19:10:26 2009
Target tables:
W_PARTY_PER_DS
READER_1_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:29 2009)
LKPDP_1> DBG_21312 Lookup Transformation [Lkp_W_ORA_PARTY_CONTACT_PS]: Lookup override sql to create cache: SELECT W_ORA_PARTY_CONTACT_PS.DEPARTMENT AS DEPARTMENT, W_ORA_PARTY_CONTACT_PS.ORG_CONTACT_ID AS ORG_CONTACT_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_NUMBER AS CONTACT_NUMBER, W_ORA_PARTY_CONTACT_PS.JOB_TITLE AS JOB_TITLE, W_ORA_PARTY_CONTACT_PS.DATASOURCE_NUM_ID AS DATASOURCE_NUM_ID, W_ORA_PARTY_CONTACT_PS.CONTACT_PARTY_ID AS CONTACT_PARTY_ID FROM W_ORA_PARTY_CONTACT_PS WHERE CUST_ACCOUNT_ROLE_ID=0 ORDER BY DATASOURCE_NUM_ID,CONTACT_PARTY_ID,DEPARTMENT,ORG_CONTACT_ID,CONTACT_NUMBER,JOB_TITLE
LKPDP_1> TE_7212 Increasing [Index Cache] size for transformation [Lkp_W_ORA_PARTY_CONTACT_PS] from [1048576] to [1392640].
LKPDP_1> TM_6660 Total Buffer Pool size is 609824 bytes and Block size is 65536 bytes.
LKPDP_1:READER_1_1> DBG_21438 Reader: Source is [BIDB], user [AABAW]
LKPDP_1:READER_1_1> BLKR_16051 Source database connection [DataWarehouse] code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
LKPDP_1:READER_1_1> BLKR_16003 Initialization completed successfully.
LKPDP_1:READER_1_1> BLKR_16007 Reader run started.
LKPDP_1:READER_1_1> RR_4049 SQL Query issued to database : (Mon Dec 28 19:10:29 2009)
LKPDP_1:READER_1_1> RR_4050 First row returned from database to reader : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> DBG_21079 Creating Lookup Cache : (Mon Dec 28 19:10:30 2009)
LKPDP_1:READER_1_1> BLKR_16008 Reader run completed.
LKPDP_1:TRANSF_1_1> DBG_21682 Lookup table row count : 3247
LKPDP_1:TRANSF_1_1> DBG_21297 Lookup cache row count : 3238
LKPDP_1:TRANSF_1_1> DBG_21294 Lookup cache creation completed : (Mon Dec 28 19:10:30 2009)
LKPDP_1:TRANSF_1_1> CMN_1671 Created new cache files PMLKUP16713_5_0_1371W32.[dat/idx] in directory E:\Informatica\PowerCenter861\server\infa_shared\Cache for Lookup [Lkp_W_ORA_PARTY_CONTACT_PS].
LKPDP_1:TRANSF_1_1> DBG_21641 Lkp_W_ORA_PARTY_CONTACT_PS: Index cache size = [1392640], Data cache size = [2097152]
WRITER_1_*_1> WRT_8167 Start loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:29 2009
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8229 Database errors occurred:
Database driver error...
Function Name : Execute Multiple
SQL Stmt : INSERT INTO W_PARTY_PER_DS(PARTY_TYPE,FST_NAME,FULL_NAME,MID_NAME,LAST_NAME,DEPARTMENT_NAME,CONTACT_ID,CONTACT_TYPE,FAX_PH_NUM,PAGER_NUM,MOBILE_NUM,WORK_PHONE,SEX_MF_CD,ETHNICITY_CD,MARITAL_STAT_CD,BIRTH_DT,BIRTH_PLACE,DEATH_DT,ST_ADDRESS,CITY,STATE,ZIPCODE,COUNTRY,EMAIL_ADDR,JOB_TITLE,ANNL_INCOME,CON_ACTIVE_FLG1,SUPPRESS_EMAIL_FLG,PROF_TITLE,STATUS_CD,ST_ADDRESS2,ST_ADDRESS3,ST_ADDRESS4,CREATED_BY_ID,CHANGED_BY_ID,CREATED_ON_DT,CHANGED_ON_DT,AUX1_CHANGED_ON_DT,AUX2_CHANGED_ON_DT,AUX3_CHANGED_ON_DT,AUX4_CHANGED_ON_DT,SRC_EFF_FROM_DT,SRC_EFF_TO_DT,DELETE_FLG,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM,CUSTOMER_NUM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8425 ERROR: Writer execution failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> CMN_1022 Database driver error...
CMN_1022 []
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8183 Rollback failed for the target [W_PARTY_PER_DS]
WRITER_1_*_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
WRITER_1_*_1> WRT_8081 Writer run terminated. [Error in loading data to target table [W_PARTY_PER_DS]]
WRITER_1_*_1> WRT_8168 End loading table [W_PARTY_PER_DS] at: Mon Dec 28 19:10:30 2009
WRITER_1_*_1> WRT_8035 Load complete time: Mon Dec 28 19:10:30 2009
LOAD SUMMARY
============
WRT_8036 Target: W_PARTY_PER_DS (Instance Name: [W_PARTY_PER_DS])
WRT_8038 Inserted rows - Requested: 1568 Applied: 1552 Rejected: 0 Affected: 1552
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [W_PARTY_PER_DS], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_SA_ORA_PartyPersonDimension.EXP_PARTY_PERSON], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.EXP_PER_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> CMN_1761 Timestamp Event: [Mon Dec 28 19:10:30 2009]
TRANSF_1_1_1> TM_6085 A fatal error occurred at transformation [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY], and the session is terminating.
TRANSF_1_1_1> DBG_21511 TE: Fatal Transformation Error.
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
Total Run Time = [3.765415] secs
Total Idle Time = [0.781122] secs
Busy Percentage = [79.255350]
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY] has completed.
Total Run Time = [1.001440] secs
Total Idle Time = [0.690994] secs
Busy Percentage = [30.999937]
Transformation-specific statistics for this thread were not accurate enough to report.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PARTY_PER_DS] has completed. The total run time was insufficient for any meaningful statistics.
MAPPING> CMN_1793 The index cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [696320] bytes
MAPPING> CMN_1792 The data cache size that would hold [3238] rows in the lookup table for [Lkp_W_ORA_PARTY_CONTACT_PS], in memory, is [1908736] bytes
MANAGER> PETL_24005 Starting post-session tasks. : (Mon Dec 28 19:10:30 2009)
MANAGER> PETL_24029 Post-session task completed successfully. : (Mon Dec 28 19:10:30 2009)
MAPPING> TE_7216 Deleting cache files [PMLKUP16713_5_0_1371W32] for transformation [Lkp_W_ORA_PARTY_CONTACT_PS].
MAPPING> TM_6018 The session completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [SQ_HZ_PERSON_PARTY] (Instance Name: [mplt_BC_ORA_PartyPersonDimension.SQ_HZ_PERSON_PARTY])
Output Rows [1788], Affected Rows [1788], Applied Rows [1788], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_PARTY_PER_DS] (Instance Name: [W_PARTY_PER_DS])
Output Rows [1552], Affected Rows [1552], Applied Rows [1552], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_ORA_PartyPersonDimension_Customer_Full] completed at [Mon Dec 28 19:10:31 2009].
Maybe you are looking for
-
I have erased my HD, then reinstalled my Windows XP Operating System and all the software. How do I now transfer all the music on my ipod classic back into my itunes library?
-
HI HOW CAN I READ VALUE INTO ONE VARIABLE.??? ie, IN RUNTIME IF IM ENTERING VALUE TO VARIABLE 'A' MEANS HW CAN I TAKE THE VALUE TO 'A'.
-
Hi All, Currently my Company have 3 module implemented in our production system MM, FI, HR and plan to implement new module PM. I'd like to know what technical things should I prepared for that plan. Such how much space should i reserve or somethin
-
I just upgraded to iLife 08. I'm creating a DVD in iDVD 7 and when I put a picture into the drop zone it is off centered. In my previous version of iDVD (iDVD4), when I hovered over the photo, a hand print appeared which allowed me to center the phot
-
Job Opportunities for Sun Certified Professionals
Welcome All, I have certain questions 1. Does Sun employs Java Certified Professionals, if yes what are the procedures? 2. Does any know particular job sites or particular job companies hiring Java Certified Professionals. 3. I am Sun Certified Java