Install EBs in Windows 2000 SP4 (for cloning process)

Hi:
I am trying to install EBS(11.5.5) in Windows 2000 SP4
Running rapidwiz.cmd advance smoothly until the screen where conducts checkups system.
If it find error, moves to the screen where summary shows what went wrong, but once you solve all problems and restart the installation process (also reset the system), rapidwiz.cmd reaches the screen where shows the process checkups but does not move to the screen that shows the summary where it failed. And not progressing, never show any error.
Any suggestions?
Rgs
Andrés.

Hi, The log file(C:\TEMP) don't say nothing respect to error.
Apparently this all right.
Rgs.
Andrés. The machine run under virtual machine (VMware)
Hi hsawwan
Thank you for your answer.
Note: Do you know if exist a tool like AIM for the version EBs12? or you say me the correct forum for this question.
AIM Link: http://www.oracle.com/partners/develop/implementation/global/aimfoundation.html
Regards.
Andrés.
Message was edited by:
Nippur
Message was edited by:
Nippur

Similar Messages

FMS3 on Windows 2000 sp4

hello, im installing FMS3 on windows 2000 sp4 and i encountered this message... something about kernel32.dll.
is this warning ok? or something that would make my FMS would not perform properly?

Hi Avil,
Have a look at this doc to see if it helps;
ACU Installation Precautions
Observe these precautions when you are installing the ACU:
PEAP client devices use the EAP 802.1X support provided in the Windows XP and Windows 2000 operating systems to enable authentication.
Note You must use the operating system to configure the authentication parameters of the PEAP supplicant.
Windows XP supports EAP 802.1X as a standard authentication type. Windows 2000 supports EAP 802.1X authentication with Service Pack 4, but does not provide a Zero Configuration for client adapters. Hence, the ACU (or equivalent) software must be used to configure the client adapter 802.11 operating parameters.
When installing the ACU software, select PEAP support during the initial installation. The PEAP supplicant cannot be added or enabled incrementally after installation; the ACU software must be reinstalled with the PEAP support option selected.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a008025d6ee.html#wp1007967
Hope this helps!
Rob
Please remember to rate helpful posts........

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

Install SAPgui 710 on Windows 2000 SP4

Hi,
I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
Although, Install SAPgui 640 on Windows 2000 SP4 is success.

Hello Sergey
please be sure that the INTERNET EXPLORER 6 is installed on the W2k Clients!
If not, then the new NWSapsetup can not start!
Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
Best Regards
Sven

Iphone driver for windows 2000 sp4?

When I plug my iphone in to my windows 2000 sp4 box it is not recognized. I get the "add new hardware" wizard and it wants me to locate a driver. I already have itunes 7.3x installed. Is there a windows 2000sp4 driver? Can I use the windows XP driver?

Is Win2K supported?
The iPhone spec page states...
Windows system requirements
PC with USB 2.0 port
Windows Vista Home Premium, Business, Enterprise, or Ultimate Edition; or Windows XP Home or Professional with Service Pack 2 or later
iTunes 7.3 or later
15" MBP, 2.16 CoreDuo, 2GB Mac OS X (10.4.8)

BOXI R2 SP4 on Windows 2000 SP4 and Internet Explorer 6 Service Pack 2

Hi
I have a customer that has BOXI R2 SP4 installed on Windows 2000 SP4. He is aware that Internet Explorer 6 Service Pack 1 is not supported for BOXI R2 SP4 but he is not able to find I.E SP2 for Windows 2000 SP4. What can he do as he is experiencing some inconsistencies in Webintelligence?
I have suggested already to:
downgrade BOXI R2 to SP3 and use the line 3 of code as this supports I.E. SP1
upgrade the O/S to XP and use BOXI R2 SP4 and I.E. SP2
Thank you in advance.
Regards,
Federica

I don't see any reason to downgrade BOXi R2 to SP3.
While Microsoft will continue to support Windows 2000 till 2010, BO advises recommends that customers be on the latest SP. In your customer's case, this will not be possible. Also tech support will require one to be on the latest SP before they will troubleshoot any issues. ADAPT resolution also requires on to be on the latest SP.
I think it prudent to upgrade the OS (on the clients) to XP.

Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4

Hi
Sorry for re-posting on this JAVA FX Installation Form form (earlier on JAVA FX general )
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Status : Not able to install
Error : JavaFx(Tm) 1.2 can not be installed on system esrlier than Windows XP x86
May be my OS ( Window 2000 SP4 ) obsolete but I cannot update since Major of other (JAVA 1.5) dev happens on my system
Any Ideas ..... :(
with regards
Karthik

Don't crosspost, please!

10g (10.2.01) setup/java.exe hangs on Windows 2000 SP4.

Hi all,
I'm currently having an issue with a 10g install on Windows 2000 (SP4) hosted on a Windows Virtual Machine.
I remote to this machine using PCAnywhere.
When I run setup.exe it just hangs on the java.exe process.
I have run the setup with a -debug option and am not seeing anything out of the ordinary.
I have also checked the the log and it does not seem to contain any errors.
I have run through the 10g pre installation requirements and don't believe that is a problem as the
machine and OS meets all the criteria.
I have researched a similar setup.exe/java.exe hanging issues and have tried some of those solutions to no avail.
For instance moving the 10g the install folder to C: drive and confirming there are no spaces in the install path.
Increasing the JRE memory allocation to 1024 in oraparam.ini
Log file contents:
Using paramFile: C:\10g_Client_10201\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
C:\10g_Client_10201\install\unzip ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.
Total args: 23
Command line argument array elements ...
"C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2\bin\java.exe"
-Doracle.installer.library_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\lib\win32"
-Doracle.installer.oui_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui"
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location="C:\10g_Client_10201\install"
-Doracle.installer.jre_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2"
-Doracle.installer.exec_location="C:\10g_Client_10201\install\oui.exe"
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=""
-mx1024m
-cp
"C:\Temp\OraInstall2008-10-21_04-54-08PM;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstaller.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oneclick.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xmlparserv2.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\srvm.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\share.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstallerNet.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xml.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-collation.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-mapping.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\emCfg.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ojmisc.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstImages.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_de.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_es.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_fr.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_it.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ja.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ko.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_pt_BR.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_CN.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_TW.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oracle_ice.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\classes12.jar;\;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraPrereq.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4-nls.jar"
oracle.sysman.oii.oiic.OiicInstaller
-scratchPath
"C:\Temp\OraInstall2008-10-21_04-54-08PM"
-sourceLoc
"C:\10g_Client_10201\install\../stage/products.xml"
-sourceType
network
-timestamp
2008-10-21_04-54-08PM
-debug

As Daniel stated on his previous post, this is not supported from the official oracle point of view, so if you are implementing this for production environments, even if it worked, you would be on your own. However, this should work. Check if you have any other java environment on the scope of the PATH environment variable. A virtual machine is from the OS configuration point of view the same as a physical machine, if the PATHs are scrambled and if you are accessing different versions of JRE at install time, this won't work, and the first symptom is a frozen java session.
~ Madrid
http://hrivera99.blogspot.com

ITunes/Quicktime killes my Windows 2000 SP4

After installing recent iTunes/Quicktime for Windows I am not able to boot my PC with Windows 2000 SP4. I can't reboot in save mode neighter - nothing goes.
Never saw a software which crashes your OS - I can't believe that!
What to do now? Don't tell me to re-install Windows 2000.
Thanks.

I had the exact problem on two of my Dell Dimension running Win 2000. I had to painfully re-install everything. Did you fix yours?

5G iPod and Windows 2000 (SP4)

I have successfully installed various iPod models to a number of Windows XP-based computers, but I am having problems installing my new 5G iPod to my Windows 2000 (SP4)-based machine.
Upon connecting the iPod to a USB 2.0 port (self-powered hub, 500 mA per port) on my machine, Windows 2000 finds the iPod and lists it in Device Manager as "? Other devices/ ? iPod" and calls for a computer restart. On restarting the computer, Windows 2000 finds the iPod, loads iTunes, and updates the iPod. However, Windows 2000 doesn't list the iPod as an "Other device" at this point, although it does show up under "Universal Serial Bus controllers" as a "USB Mass Storage Device." So far so good. But then, after a few minutes (remaining connected to the computer all the while, with iTunes running), the iPod turns itself off. iTunes still shows that the iPod is connected, but if I instruct iTunes to "Update the iPod," iTunes can't locate it and I get a "System Settings Change (new device)" window from Windows 2000 instructing me to restart my computer. Also, the iPod does not charge when connected to a USB 2.0 port unless Windows 2000 has found the iPod, listed it as an "? Other devices/? iPod" and is waiting for a restart. In this case, it charges just fine.
Is the 5G iPod truly compatible with Windows 2000 as advertised? Is there a fix for the problem that I am having? I have tried ALL recommended trouble-shooting steps several times, to no avail.
ASUS P2B-LS Windows 2000 Service Pack 4 Installed

Your version of Windows is not compatible with iTunes 7.4 or the third generation iPod nano.
(24749)

PEAP on Windows 2000 SP4

I have setup PEAP with ACS Server and it works fine on Windows XP. How can I connect Windows 2000-SP4 PC to the access point with PEAP? Wireless service is running and I have enabled 802.1X with PEAP under the Authentication tab of the network card.
What options should I select under ACU?
Thanks

Hi Avil,
Have a look at this doc to see if it helps;
ACU Installation Precautions
Observe these precautions when you are installing the ACU:
PEAP client devices use the EAP 802.1X support provided in the Windows XP and Windows 2000 operating systems to enable authentication.
Note You must use the operating system to configure the authentication parameters of the PEAP supplicant.
Windows XP supports EAP 802.1X as a standard authentication type. Windows 2000 supports EAP 802.1X authentication with Service Pack 4, but does not provide a Zero Configuration for client adapters. Hence, the ACU (or equivalent) software must be used to configure the client adapter 802.11 operating parameters.
When installing the ACU software, select PEAP support during the initial installation. The PEAP supplicant cannot be added or enabled incrementally after installation; the ACU software must be reinstalled with the PEAP support option selected.
From this doc;
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_technical_reference_chapter09186a008025d6ee.html#wp1007967
Hope this helps!
Rob
Please remember to rate helpful posts........

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

How to configure Failed RID master in Windows 2000 SP4 DC?

We are still using windows 2000 SP4 server due to application compatiblity of our core application, this error has occur during a fire here in our office then the physical server itself, migrated to our DR site, then after that event the physical server
itself join again to its original place where as, in H.O branch.
First Problem:
Now our branch office site users always fails to log to their workstation, we still need to reset their password again and again after the day ends , and it will come back again tomorrow.
Second Problem:
When we are adding a user account it always say's "Windows cannot create the object because the Directory Service was unable to allocate a relative identifier" it predict that the RID master has been corrupted because of the migration
from site to site,
Can I still have answers here even though this is way way to obsolete from microsoft, I need help please :)

Hi thanks for your kind reply,
No, there are 4 DC in our environment but the forest root DC has the problem, I only create user accounts, I still not creating other object in active directory.and also the replication between root DC and other DC has problems. but I think its in the DNS
part, just need step by step process. :)
I'll give it a try on what you suggest but is this tried and tested? because when you replicate from corrupted FSMO roles DC, the new DC will also infected with errors,
By the way I already tried ntdsutil to fix the AD database and all are passed.

How to install 10g on windows 2000

Hello
Please guide me step by step as how to install 10g on windows 2000 .
I am a beginner and I want to install this setup in my office.At present we are using oracle8i on windows 2000.We want to do a fresh installation in a new setup and hence for the time being we are not going for upgrade or migration from 8i
Please guide me .
Thanks in advance.

Just follow the installation guide, that's all you need,
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm
Make sure install Oracle 10g into different ORACLE_HOME than 8i

Install EBs in Windows 2000 SP4 (for cloning process)

Similar Messages

Maybe you are looking for