Install EP6 with XI 3.0 on the same WAS

Hello,
I've installed EP6 on the same Web AS that XI 3.0 is installed.
I would like to know if it is ok to install EP6 that way ? can I connect EP6 to R/3 systems while it is installed that way ?
Please Advice,
Dimitry Haritonov

Hello John,
Finally I understood what was my problem.
During the installation Web AS 6.40 (ABAP+JAVA) for XI 3.0, you choose a specific UME option that is suitable only for XI : "Use central ABAP system for users and groups".
If you install EP6 on the same Web AS you won't be able to connect your portal to LDAP. In other words you won't be able to change data source (Portal->system Administration->System configuration->UM configuration->Data Sources ).
note number : 718383
I'd be glad if someone will add another info on the subject.
Regards,
Dimitry Haritonov
Message was edited by: Dimitry Haritonov

Similar Messages

I purchased Adobe Acrobat Standard V11 on one user account on one pc. I want to remove this software and re-install it on another user account on the same pc. Will this use an extra licence? I understand this product comes with 2 licences but am hoping

I purchased Adobe Acrobat Standard V11 on one user account on one pc.
I want to remove this software and re-install it on another user account on the same pc.
Will this use an extra licence?
I understand this product comes with 2 licences but am hoping to retain the extra for another pc.

My experience (limited) has been to expect it to be installed automatically for all users.
What seems to be missing on the new user account?

How to sync with two computers not at the same time, I'm registerd with one computer

How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
Where do I find my Sync Key ? so I can install manually if it works ?

Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

I can't Start, Uninstall or Install new iTunes. I'm getting the same error message: Window Installer Service could not be accessed. No other programs have similar problem. Any suggestion what can be done?

I can't Start, Uninstall of Install new iTunes. I'm getting the same error message: "Window Installer Service could not be accessed". No other programs having similar problem. Any suggestions how to fix it?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

HT1455 I tried to install windows 7 on my imac but the computer was not booting again what shall I do?

I was installing windows 7 on my imac but the installation was not completed and now I cannot boot what shall I do?

Provided you used BootCamp to do the installation, with your machine off, press and hold down the "Option" key while turning it on. Hold the key down until you get the screen where you can select which OS to boot into. Select OS X (you'll need to physically click the button here... tapping won't work if you have it enabled). Once in OS X, go into System Preferences and Startup Disk. This is where you set the default OS to boot into. Change it to OS X. Relaunch BootCamp Assistant to remove the failed installation of Windows. You can try again if you wish.

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year. Question 1: Problem = hard drive? Question 2: Problem = PRAM battery? the What

Hello, can someone help me: my eMac G4 700 MHz. I can not boot it. If he starts appears on the screen, only a small "folder with a question mark." The Mac was not used 1 year.
Question 1: Problem = hard drive?
Question 2: Problem = PRAM battery?
the
What can I do to boot?

Restart with the Option key held down.
If the internal drive shows up, it's the PRAM battery.
If it doesn't, insert a compatible Mac OS 9 or X install disk, click the button with the circular arrow, and either repair the internal drive or install a new OS on it. If it doesn't show up in Disk First Aid(9) or the Disk Utility(X), it's either not plugged in or needs to be replaced.
(97530)

I have tried 10 times to install creative cloud and it quits in the same place (50%) through each time.

I have tried 10 times to install creative cloud and it quits in the same place (50%) through each time.

Nobody can tell you anything without proper system info or other technical details like the install log. If it always stops at the same spot, something specific happens like waiting for a specific user input, running out of disk space or simply triggering some external process like a virus scanner that may block the install, but never properly produces a warning dialog.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Troubleshoot install issues with log files | CS5, CS5.5, CS6
Mylenium

If I own a previous lightroom program installed in my desktop may I open the same program in my desktop?

If I own a previous lightroom program installed in my desktop may I open the same program in my desktop?

Hi Sailor,
It is pretty amazing you got a new version without even knowing it.
In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better. For most day-to-day uses in between it's a toss-up. The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
SG

Cannot sync my iphone with itunes as it says it is already synced with another itunes library on the same computer.

On connecting my iphone 4S to itunes I am unable to add any music from my itunes library and get a message saying it is already synced with another itunes library on the same computer. As far as I am aware I only have one itunes library on the computer. Does anyone know how to fix this error please?
iPhone and iTunes software fully up to date.
Thanks!

iOS: Device not recognized in iTunes for OS X - Apple Support

Apple TV with Multiple Mac's in the same house & a PC

Question--
I recently got a used Apple TV for christmas. I successfully synched it with my Macbook but I haven't tried to synch the content from my iMac or PC. I'm wondering if I can synch content from two seperate mac's & my PC and not have the content from the first Mac erased. The Apple TV has a 150 GB Hard drive so I figure i can use it as a mass media storage device for all of my computers.
So I am curious if all of my computers can play nice with my Apple TV at the same time without having content erased automatically. I would have already tried it but it takes so long to synch all of my content that I don't want to risk it especially if it doesn't work.
What codecs does the Apple TV support? Can I put Divx and Xvid movies in my iTunes Movies folder and have them play? Or do I need to convert them to an Apple friendly file.
Thank You

OK
Important things first:
1 - there is no way (short of hacking/dismantling) AppleTV to get media off it
2 - therefore you MUST NOT use it as a mass storage/backup device
3 - you must keep copies of files synced (copied) to it in a single iTunes library
4 - if you delete those files and sync again they will go from AppleTV too
You can only sync a single library, but you can stream up to 5.
Codecs are limited to MP4/h264, see here:
http://www.apple.com/uk/appletv/specs.html
Anything else needs to be converted.
AC

Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

Here is your answer:
http://support.apple.com/kb/HT1495

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Install EP6 with XI 3.0 on the same WAS

Similar Messages

Maybe you are looking for