Install ERP ECC 6.0 EHP4 with MSCS High Availability??

Dear Expert:
I need to Install ERP ECC 6.0 EHP4 with MSCS High Availability cluster.
excpet the installation guide.
is there any step by step document or guide could be reference??
please give me the link or any infor.
and....not quite sure what to do in the guide below:
Nodes7.2.2Distribution of SAP System Components to Disks for MSCS
When planning the MSCS installation, keep in mind that the cluster hardware has two different sets of disks:% ·4
Local disks that are connected directly to the MSCS nodes% ·4
Shared disks that can be accessed by all MSCS nodes via a shared interconnect
NOTE
Shared disk is a synonym for the MSCS resource of Resource type Physical disk.
You need to install the SAP system components in both the following ways:% ·4
Separately on all MSCS nodes to use the local storage on each node% ·4
On the shared storage used in common by all MSCS nodes
thank you very much for your help
regards
jack lee

You can find installation documents at [http://service.sap.com/instguidesnw70]

Similar Messages

Install ERP ECC 6.0 with MSCS High Availability error~

Dear Expert:
After I install the ASCS,
the next step is install the first node...
but during the 'Enter the sap instance parameters'
it occured an error:
Cannot find an 'Abap SCS' SAP instance appropriate for clustering.
SOLUTION:Check your input data.
I pretty sure that all data i inputed are correct.
can any one tells me what's going on??
Regards
Jack Lee

Dear Experts,
I'm installing ERP production systems on MSCS of Windows 2008.
After successfully installing ASCS, I follow the section 7.4.5 of
installation guide to configure first MSCS node.
The sapinst starts smoothly but pop-up a error message after I input
password of system administrator. The error logs are below:
TRACE 2009-10-27 15:28:30.451
Function setMessageIdOfExceptionMessage:
modlib.jslib.invalidIPAddressNumber
WARNING[E] 2009-10-27 15:28:30.451
CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f57ff00 is bigger than 0xFFFFFFFF.
TRACE 2009-10-27 15:28:30.452 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2009-10-27 15:28:30.453 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key
|MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
I can't find any solution on SAP Notes and SDN. Please kindly help.
Thanks!

UOO sequencing along with WLS high availability cluster and fault tolerance

Hi WebLogic gurus.
My customer is currently using the following Oracle products to integrate Siebel Order Mgmt to Oracle BRM:
* WebLogic Server 10.3.1
* Oracle OSB 11g
They use path service feature of a WebLogic clustered environment.
They have configured EAI to use the UOO(Unit Of Order) Weblogic 10.3.1 feature to preserve the natural order of subsequent modifications on the same entity.
They are going to apply UOO to a distributed queue for high availability.
They have the following questions:
1) When during the processing of messages having the same UOO, the end point becomes unavailable, and another node is available in order to migrate, there is a chance the UOO messages exist in the failed endpoint.
2) During the migration of the initial endpoint, are these messages persisted?
By persisted we mean that when other messages arrive with the same UOO in the migrated endpoint this migrated resource contains also the messages that existed before the migration?
3) During the migration of endpoints is the client receiving error messages or not?
I've found an entry on the WLS cluster documentation regarding fault tolerance of such solution.
Special Considerations For Targeting a Path Service
When the path service for a cluster is targeted to a migratable target, as a best practice, the path
service and its custom store should be the only users of that migratable target.
When a path service is targeted to a migratable target its provides enhanced storage of message
unit-of-order (UOO) information for JMS distributed destinations, since the UOO information
will be based on the entire migratable target instead of being based only on the server instance
hosting the distributed destinations member.
Do you have any feedback to that?
My customer is worry about loosing UOO sequencing during migration of endpoints !!
best regards & thanks,
Marco

First, if using a distributed queue the Forward Delay attribute controls the number of seconds WebLogic JMS will wait before trying to forward the messages. By default, the value is set to −1, which means that forwarding is disabled. Setting a Forward Delay is incompatible with strictly ordered message processing, including the Unit-of-Order feature.
When using unit-of-order with distributed destinations, you should always send the messages to the distributed destination rather than to one of its members. If you are not careful, sending messages directly to a member destination may result in messages for the same unit-of-order going to more than one member destination and cause you to lose your message ordering.
When unit-of-order messages are processed, they will be processed in strict order. While the current unit-of-order message is being processed by a message consumer, the next message in the unit-of-order will not be delivered unless it is to the same transaction or session. If no message associated with a particular unit-of-order is processing, then a message associated with that unit-of-order may go to any session that’s consuming from the message’s destination. This guarantees that all messages will be processed one at a time and in order, and any rollback or recover will not prevent ordered processing of the messages.
The path service uses a persistent store to save the state of which member destination a particular unit-of-order is currently using. When a Path Service receives the first message for a particular unit-of-order bound for a distributed destination, it uses the normal JMS load balancing heuristics to select which member destination will handle the unit and writes that information into its persistent store. The Path Service ensures that a new UOO, or an old UOO that has no messages currently on any destination, can be enqueued anywhere in the cluster. Adding and removing member destinations will not disrupt any existing unit-of-order because the routing decision is made dynamically and those decisions are persistent.
If the Path Service is unavailable, any requests to create new units-of-order will throw the JMSOrderException until the Path Service is available. Information about existing units-of-order are cached in the connection factory and destination servers so the Path Service availability typically will not prevent existing unit-of-order messages from being sent or processed.
Hope this helps.

Problems With the High Availability

Hi all,
First of all, i'm sorry for my "bad" english, but i will to try to explain my problem as clairly as i can.
I'm using VDI 3.1.1 ,a configuration "High Availability with bundled MySQL" with a primary server and 2 secondary servers.
i'm trying to test the HA for the core VDI and FailOver for the VirtualBox, The HA works but i think with a timeout (=2minutes) that i want to reduce.
I found some troubles with the VirtualBox failover.
Here is more explaination :
These Tests are done with the VRDP mode.
The first test after the installation&configuration, the failover works fine after the crash of server A, the desktops migrate and restart in the other server (the server B)
The second test : i reboot the server A, and i want to test again with shuting down the server B (crash). the desktops migrate to the server A and they are with the state "running" but SRS can't deport the display (it loops on the authentication screen) ... The VM is running and i can access to it with the Remote Desktop Connection.
When i looked to the logs, i found that the SRS is always looking for the VM on the server who crashed (Server B). I looked to the vda-client command for the user concerned and it shows me that the host is the server who crashed (Server B) with the old port. I opened the MySQL,vda database and i looked the datas on the t_desktop* table, the fields* ip-or-dns* and port *were not updated when the VMs migrates. i update the two fields with an update request with the correct host (of the server A) and the new port where the VM has migrate, and the display comes in 1s.
So, the VM migrate well, but Datas on MySQL Database were not updated.
For the WRDP mode, everything works fine, because the SRS uses the IP of the VM to deport the display, not the host and port like in VRDP mode.
I test this with different configuration :
* HA with bundled Mysql : primary server and two secondary servers. The two secondary servers contains the VDI core and the VirtualBoxes.
* HA with bundled Mysql : the 3 vdi Cores are virtualized on a server, and Two Servers with only the VirtualBoxes.
* One Server with VDI Core, and Two Servers with only the VirtualBoxes to test only the failover of virtualbox.
All of this tests gave the same results.
My questions :
1 - After a crash of a server and after reboot, is there anything to do? (i checked all the vda services "database,webservices ..." and everything is ok after the reboot).
2 - Is there a bug for the HA with the VRDP mode?
3 - Is anybody had the same problems? if yes, what is the solution?
4 - How can i reduce the timeout for the HA of VDI Core? is there any process for that?
Thank you all for your help , and again sorry for my bad english, i know i have to improve it :)

I am using VDI version 3.2. Virtualization layer is Virtuabl Box.
setup is 1 x VDI server, 2 x virtual box host , remote mysql database and shared storage backend i.e NAS
The Virtualbox session / vm does not fail over, period !
When i pull the plug on the 1st Virtualbox, all the desktops session on the down server, remains on the server
and did not failover to the other one.
Seriously , have any one managed to get the HA working ? anyone ?
see below for the cli output.
Started 1 desktop
root@vdihost-a:~[598]# vda provider-list-hosts virtualbox
NAME             STATUS ENABLED         CPU_USAGE      MEMORY_USAGE DESKTOPS
vdi1              OK Enabled       0% (20 MHz)      10% (1.8 GB)         0
vdi2               OK Enabled      1% (310 MHz)      16% (2.6 GB)         1
Started 2nd desktop
root@vdihost-a:~[599]# vda provider-list-hosts virtualbox
NAME             STATUS ENABLED         CPU_USAGE      MEMORY_USAGE DESKTOPS
vdi1             OK Enabled      1% (319 MHz)      17% (2.9 GB)         1
vdi2               OK Enabled      1% (327 MHz)      16% (2.6 GB)         1
AfterpPower cut to vdi2, but second desktop did not failover to vdi2, desktops count still 1, instead of 2
root@vdihost-a:~[600]# vda provider-list-hosts virtualbox
NAME              STATUS ENABLED         CPU_USAGE      MEMORY_USAGE DESKTOPS
vdi1               OK Enabled      0% (140 MHz)      17% (2.9 GB)         1
vdi2     Unresponsive Enabled        0% (0 MHz)         0% (0 KB)         1
I really want to know if anyone has managed to get this working at all.

Install ERP ECC 6.0 with EHP4 and JAVA stack (usage type)

Hi all,
I need to install ECC with EHP4 and also JAVA stack.
I know that I have to install 2 stacks with different SID and oracle homes, firts I have to install ABAP stack and then the JAVA stack, but wich usage type should I choose for JAVA STACK?
What I would like to have in my new installation would be the same usage type for JAVA stack like ERP 6.0 SR3 ABAP+JAVA stacks.
What should I choose?
Regards
Thanks

Hello,
SAP ECC 6.0 allows ABAP and JAVA but EHP4 this feature is not.
One thing I can suggest if you install ABAP stack first, it will initiates (even different SIDu2019s) the JAVA stack also.
So JAVA stack having a protection with ABAP, because you know JAVA stack is a very sensitive and time consuming one when you want to start are stop.
So you can do this sequence
Suresh

Ecc6 ehp4 ready sr1 installation with MSCS

hi.. i have been trying this past 2 days, to install the ecc on windows 2008, with db2 9.5 fp 5, but always failing during the execution of the db2mscs command, what i notice during the execution, the resources moved to node2 and DB2PRD-0 resources failed. authorization check ok and im using domain admin to install
anybody could help me on this ?
i notice the error on the debug file :
DB2MSCS_configure_FCM_address fnc_entry ...
DB2MSCS_configure_FCM_address non-fatal_err trace_point 10
91 00 0f 87 u2018 u2021
DB2MSCS_configure_FCM_address fnc_errcode 1508
DB2MSCS_Migrate_DB2_Instance non-fatal_err trace_point 44
e4 05 00 00 ä
Cleanup_and_free_all_resources fnc_entry ...
Cleanup_all_DB2_resource fnc_entry ...
DB2MSCS_Offline_resource fnc_entry ...
DB2MSCS_Offline_resource fnc_retcode 0
Cleanup_all_DB2_resource fnc_retcode 0
Cleanup_all_GenericService_resource fnc_entry ...
Cleanup_all_GenericService_resource fnc_retcode 0

Is this could be the reason ?
Log Name: System
Source: Microsoft-Windows-Security-Kerberos
Date: 7/8/2010 11:22:24 PM
Event ID: 4
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: db1erp.bitis.vn
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server db1erp$. The target name used was cifs/db2prd. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password. If the server name is not fully qualified, and the target domain (BITIS.VN) is different from the client domain (BITIS.VN), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
 <Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
 <EventID Qualifiers="16384">4</EventID>
 <Version>0</Version>
 <Level>2</Level>
 <Task>0</Task>
 <Opcode>0</Opcode>
 <Keywords>0x80000000000000</Keywords>
 <TimeCreated SystemTime="2010-07-08T16:22:24.000Z" />
 <EventRecordID>39604</EventRecordID>
 <Correlation />
 <Execution ProcessID="0" ThreadID="0" />
 <Channel>System</Channel>
 <Computer>db1erp.bitis.vn</Computer>
 <Security />
</System>
<EventData>
 <Data Name="Server">db1erp$</Data>
 <Data Name="TargetRealm">BITIS.VN</Data>
 <Data Name="Targetname">cifs/db2prd</Data>
 <Data Name="ClientRealm">BITIS.VN</Data>
 <Binary>
 </Binary>
</EventData>
</Event>

Which IDES to install for ECC+BI7.0+IP functionality

Hi there. I want to have an IDES system that'd have ECC and BI at the same server. I want to be able to use the ECC as the source system for the later extraction to BI. Also and it's very important I want to have the IP (Integrated planning functionality).
As I've read now it's impossible to install ABAP AS+JAVA AS at the same instance and I think that JAVA AS is necessary for the IP functionality. In some SAP note I read that I can install ERP ECC 6.0 with EHP4 with ABAP AS and later add JAVA Engine, but it says also that JAVA AS doesn't have any IDES example companies as ABAP AS has.
So basically, my question is, what version or type of IDES do I have to install in order to have in the same server ECC+BI7.0 and IP?
Ideas?

We have completed the installation of ECC 6.0 today.
After starting sapinst.exe we only selected the "ABAP stack" and "ECC 6.0".
This is enough for IDES installation for MM/SD/FICO on the ABAP stack (not sure about PP though, although we can see PP on the start menu).
Thanks to all those who responded.
Rgds

Error when installing the ERP6.0 SR3 in windows MSCS

Hello Gurus，
When i tried to install ERP 6.0 SR3 in windows MSCS+ oracle, I met a issue.
1. oracle + OFS is installed.
2. ASCS is installed.
3. first MSCS node is configured
4. then i try to install the DB instance, according to the installation guide, there is a statement saying:
Make sure that in the database host field, the local database host is displayed.
but during my installation, the DB host field is blank, so i manually enter the local host name, click on next, choose the export directory and done.
then in the checking oracle existing step, an error occurred:
oracle software is not installed, please install oracle before ...
Could you help me how to solve the issue?
Best regards,
Charlie

hello,
After restart the OS, this issue seems to be vanished, but we met another error.
In the installation where sap creating DB instance, there's a option to let us to choose the oracle db version, since i installed the oracle 10.2.0.4, i chose 102 as the version, but an error message pop up indicating that the version is wrong. And then i re-select version 112, it can continue...
i looked back at our installation and noted that when we installed OFS 3.4.15, the installer indicated that 11g. i suspect it could be SAPinst read the version from the wrong place, instead of 102, it recognize 112.
Did you guys have any similar experience of it?
Could you give me some help?
Thanks a lot in advance!
Regards,
Charlie

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

Installation ERP 6.0 EHP4 on MSCS windows 2008 - oracle 10

Hi,
I'm installing an ERP 6.0 EHP4 on platform windows 2008 - oracle 10 with MSCS.
Cluster is configure as described in SAP installation manual.
Network configuration is set up as described in SAP installation manual.
During step --> First MSCS Node (7.3.5 Configuring the First MSCS Node) sapinst got an error before end of input parameters.
In other forum I've found to check MSCS network configuration, but it seems OK.
Any idea ?
Thanks.
Maurizio Manera
TRACE 2010-02-19 16:36:03.878
Call block:CollectClusterParameters_windows_ind_ind_ind
 function:CollectClusterParameters_windows_ind_ind_ind_DialogPhase_dGetSAPClusterParameters
is validator: false
TRACE 2010-02-19 16:36:03.878 [syxxcnamrs.cpp:278]
 PSyHostsEntry CSyIPNameResolverImpl::getHostByName(const iastring& hostName) const
IP name gnutti-sapgr resolves to IP address(es): 192.168.0.133
TRACE 2010-02-19 16:36:03.878
Function setMessageIdOfExceptionMessage: modlib.jslib.invalidIPAddressNumber
WARNING[E] 2010-02-19 16:36:03.878
 CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-02-19 16:36:03.878 [iaxxejsbas.hpp:488]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-02-19 16:36:03.893 [sixxcstepexecute.cpp:977]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-02-19 16:36:03.893
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2010-02-19 16:36:03.909 [iaxxgenimp.cpp:712]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > High-Availability System > Based on AS ABAP > First MSCS Node. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/ORA/SYSTEM/HA/AS-ABAP/MSCS-A.
TRACE 2010-02-19 16:36:03.909 [iaxxgenimp.cpp:1257]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI

Edited by: Eric Brunelle to delete html tag on Feb 19, 2010 1:47 PM

Hi,
my SAP system is 7.01 kernel based so I can't apply control.xml of "Note 1249469 - SAP NetWeaver Based On Kernel 7.11: Windows".
I've just download new control.xml file attached to "Note 1326698 - SAP NetWeaver 7.01 SR1/Business Suite 7 SR1: Windows" but error still remains.
So I've compared the two control.xml files in corrispondence of function IPAddress(adr), where the error "modlib.jslib.invalidIPAddressNumber" is returned.
The difference between files are reported below (first control.xml for kernl 701 and before control.xml files for kernel 7.11).
I've noticed that in my control.xml files is missing the following code:
 while (num < 0) {
 num += 0x100000000;
For a test I've tried to modify my control.xml files adding this code and there is no error; I can see "Parameter Summary" of sapinst program. Now I can go on with installation, clicking on next.
Now I've to decide if going on with installation or opening a support message to SAP Support for validating this solution.
What do you think about this ?
Bye
Maurizio
7.01 - control.xml
 Trace("IPAddress", "IPAddress(number ", adr, ")");
 var num = Number(adr);
 if (isNaN(num) || num > 0xFFFFFFFF || num < 0) {
 throw new Exception("modlib.jslib.invalidIPAddressNumber", "0x" + num.toString(16));
 this._adr = Number(adr);
7.11 - control.xml
 Trace("IPAddress", "IPAddress(number ", adr, ")");
 var num = Number(adr);
 while (num < 0) {
 num += 0x100000000;
 if (isNaN(num) || num > 0xFFFFFFFF || num < 0) {
 throw new Exception("modlib.jslib.invalidIPAddressNumber", "0x" + num.toString(16));
 this._adr = num;

SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.

Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

Install SAP Baseline Colombia v 1.603 over SAP ECC 6.00 EHP4 Ready SR1

Hi everyone,
I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
In SAP Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0, it states that "For Enhancement Package 3, you require the Support Packages of ERP 6.0 Stack 08" so the installation media that is more close to stack08 is "SAP ECC 600 Support Release 2", please confirme me if is this correct?
Best Regards,
Franklin Cedillo
Basis Consultant

> I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
> Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
You need to use Solution Manager, create a task in the maintenance optimizer and get the correct packages.
Since your system is already on EHP4 (or EHP4-ready) you can forget about the notes of EHP3 and EHP2.
Markus

Multi system scenario - ERP ECC 5.0 (or lower) - FSCM 6.0 Ehp4

Dear colleagues,
If you are dealing with a multisystem scenario, where ERP ECC is in versión (5.0 or lower) and your FSCM system is in 6.0 with Ehp4, can you take advantajes of the new functionalities released in Ehp2, Ehp3 and Ehp4? or is it mandatory to upgrade your ERP ECC system to 6.0?
Kind regards.

Hi Deep,
I have confirmed this in Note 859995 - Upgrade to SAP Dispute Management 6.0 for FI AR
"If your Accounts Receivable Accounting system is Release R/3 4.6C, note that SAP Dispute Management 6.0 does not offer any more up-to-date functions than SAP Dispute Management 3.0."
This should apply for any landscape, one system scenario and two system scenario, right?

Install ERP 6.0 EHP5 With AIX DB2

Good Morning:
we will Install ERP 6.0 EHP5 With AIX DB2, please, notes and/or information about size of all file system, and tips for take into account
Thanks
vhms

Hello Victor,
Best way is to go through the Installation Guide thoroughly, every needed information and notes and tips as well are clearly mentioned in the guide.
service.sap.com/instguides --> SAP Business suite --> SAP ERP --> SAP ERP 6.0 --> SAP enhancement packages for SAP ERP 6.0 --> SAP enhancement package 5 for SAP ERP 6.0 --> New Installation of SAP ERP 6.0 Enhancement Package 5
Just do not skip this info -
You can install a new system with SAP ERP 6.0 enhancement package 5. After the installation the technical usage "Central Application" is already installed
After installation with 'central application' , you need to upgrade rest of the ecc components to EhP5. Read the Guide.
Thanks

Install ERP ECC 6.0 EHP4 with MSCS High Availability??

Similar Messages

Maybe you are looking for