Install error 0X80080001 with Windows 7 RC1

This Error Come when you have Intel Processor or if you dont that also you can solve the problem by getting whole detail.You will see the DVD Work in your friend P.c But show error in your p.c .get the solution from here.Web site: yadvi.com/how-to-install-window-7-in-intel-processor

Similar Messages

Error printing with Windows 7 even after unistalling old and installing new driver

I recently updated to 64-bit Windows 7 and cannot get my HP OfficeJetJ4580 working after the upgrade. I uninstalled all prior printer drivers and ran the recommended software from the HP site to ensure there were no remaining drivers on my system, then installed the updated drivers for use with WIndows 7. The driver isntallation said it was successfula dn that my printer was ready for use.
When I try to print, the job is sent to the print que. The print que immedialtely notes "Error printing" and deletes the job from the que. The printer never responds or tries to print. This happens with anything I try to print, including a test page. No error message is dispalyed on my screen. The only way I can see the error is by opening up the print que and looking at the pending jobs. I went to the HP support center and downloaded and ran the printer diagnostic sofware they had on there. It could not detect any problems with the printer.
I am at a complete loss as to what to try next.

Hello PPN, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into installation issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I'd recommend putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
After the computer has been put in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Error -54 with windows 8.1 and iOS 7.1.2

I tried adding two albums to my iTouch 5 with windows 8.1 and recently updated my iTouch's OS to version 7.1.2. I keep getting the error -54, saying it couldn't be synced but it still keeps sycing and comes up a lot. I tried restoring my iTouch and restarting my laptop, can anyone help?

That's weird. Here it is in full.
It may be too late for you to try what I did, but by the looks of it, it will be viewed many times going forward.
I noticed I was having the problem with songs that had been in WMA format but converted by iTunes. From what I read, this error is actually about permission issues for the files. I tried changing the permissions on the directory and cascade them to each file, but that didn't work. Reading more, one user got around the problem by zipping the problem files and use the files from the zip to sync. That worked for them. I tried that and it didn't work. Then I just figured there is some residual setting either on the iPad or in iTunes that was still hosing me.
I'd gotten pretty annoyed by this time so I figured I have to start with a clean slate. I reset the iPad to factory condition. I then went to windows restore and selected the restore point prior to installing iTunes. I then went thru the painful process of setting everything up again. Once I was installed and let the music be added to iTunes, I went thru and "unchecked" everything I didn't care if it went to the iPad. That was frustrating since I didn't actually have any check boxes showing. Since I was going to exclude whole albums, I did a right click on one in iTunes and there was an option in the context menu to uncheck the box. I did this for all the unwanted albums At this point, I connected the iPad and it was recognized. I went to the page to set up the syncing options. I tried to do it manually, but that was going to be a huge pain so I did the automatic sync and check the box to NOT sync unchecked items.
Finally, it started to work. I still got about 15 of the error -54 messages. I just clicked it away and the syncing continued.Since I had nearly 2000 songs transfer, I don't know which caused the error but I now have music on my iPad.
It's a lot of work, but I finally got the results I wanted. Hope this helps.

Install error #1620 PrPro Windows Vista Home Premium

Install error 1620 when attempting to install CS4 "This installation package could not be opened" (for each component of the software package). Windows Vista Home Premium 32 bit, Intel i7 processor. Unable to install any components of PrPro. This is after a clean install of Vista Home Premium (part number x12-24171-01)with discs provided by microsoft.

I would never install a new OS over the top of what is there... wipe/format the hard drive and install fresh
Also, if you have a 64bit computer with more than 4Gig of ram, think about the 64bit version of Win7
CS4 can't use more than about 3Gig of ram, but if the OS can use more to run better... that is what I would do
Just be aware that you should still run CS4 in WinXP compatibility mode, as I posted before
Also read the article below... I have NOT done this, but it seems to be an easy process
http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/

Boot error 34 with Windows 8.1 on Lenovo Yoga 13

Bought my Yoga 13 with Windows 8 pre-installed and updated it to 8.1. Worked since Oct 2013. Starting yesterday after shutdown and new power on allways get blue screen saying:
Recovery
Your PC needs to be repaired
The Boot Configuration Data file is missing some required information.
File: \BCD
Error code: 0xc0000034
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disk or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
No recovery tools came with the product. Are there any hints on how to proceed or produce a bootable USB device for Windows 8.1? How can I find my Windows product key if it is needed to download any corresponding licensed software?

You can always download Windows 8.1 trial edition and create a bootable USB disk. That will help you boot to WinRE (Windows Recovery Enviroment). Once booted you can run bootrec to fix your bcd
http://support.microsoft.com/kb/927392
Since you upgraded from Windows 8 to Windows 8.1, the product key that you have will be for Windows 8. Most of the manufacturers paste the license key bottom of the device. If you do not find it there, please contact the vendor.

NVIDIA driver 6md647ww does not install on W701 with Windows 7 64 Bit

Hello,
I have downloaded the nvidia driver 6md647ww (311.00), 64 bit version, and can't install on a Windows 7 64-bit system. It says "no compatible device found". The strange thing is, although the decompression routine and the window asking to start installation both say that they are the 64 bit version, the text besides the check mark "install the driver now" says it will install the 32 bit version (after decompressing the window says 64 bit in the upper part, but 32 bit in the lower part).
So I guess there is an error in the installation routine which erronously wants to install the 32 bit version although it is DEFINITELY the 64 bit version I have downloaded. Also, I downloaded for testing the 32 bit version of the driver (5md647ww), and if I try to install that, I get exactly the same error as with the 64 bit version.
Could someone please look into the 6md647ww, there is something wrong with it. Also, I can install 6md640ww and 6md643ww without any problems and switch between these two versions without any error - the 6md647ww issue is definitely NOT a problem of my OS configuration.
I have a sporadic heavy crash issue with 6md643ww and need to upgrade badly.
Please help. Best regards, Michael
System: Lenovo W701, 16 GB Ram, Windows 7 64 Bit, NVIDIA Quadro FX 3800M

In the meanwhile Rev 04 of the driver was published. This version is binary different to Rev 03 and - surprise - it now says correctly after unpacking it will install the 64-bit version. But after that same problem as before, "no compatible device found".
I did some searching into the files of 6md647ww. I guess the file Display.Driver\NVLT.inf contains a list of compatible devices - in this file the sections labelled NVIDIA_SetA_Devices.NTamd64.* list a lot of device-ids, for example PCI\VEN_10DE&DEV_0A3C&SUBSYS_214517AA and many more. The device id of the graphics card for a system can be found in the hardware/device manager of windows, I obtained that for my card and this id doesn't show anywhere in NVLT.inf. So if my guess is correct, it is no wonder the installer says "no compatible device" since the device id of my card is not listed in NVLT.inf.
Please note again that all previous versions of lenovo drivers for my NVIDIA Quadro FX 3800M did and do install without absolutely any problem!
This is strange, readme of the current driver version definitely says NVIDIA Quadro FX 3800M is supported by this driver, but the driver doesn't seem to contain the device id for it. Looks almost like the wrong driver was used / bundled into 6md647ww.
And again the question to the board / administrators if lenovo technical support is reading here and is there another contact at lenovo where I could direct my problem to? I am still having the sporadic heavy crash issue which is very dangerous since it can happen any time if displaying whatever graphics in whatever software and which therefore has a high risk of data loss. Also, installing the plain NVIDIA driver directly in the current version still has the problem of flickering and color errors, so this isn't a solution either.
Best regards, Michael

Error 2356 with windows vista 64bit

I have had Itunes and Quicktime working fine but suddenly quicktime was nt working giving me an end program error when i need to play anything so i decided to reinstall Itunes and Quicktime but it started to even give me an error uninstalling them but i managed to manually uninstall them and delete even the reg files but when i try to installl any of them now its gives me an 2356 error
Please advise?

Unfortunately, I tried every solution on the page (including restoring) and it still doesn't work. I thought the problem was because of a bad video file that iTunes warned me to delete, but that doesn't work at all.
There has to be an issue with Vista. The iPod worked just fine on my Dell with Windows XP. As soon as I switched computers, it stopped working. What issues does iPod have with Vista?

Error ~69 with Windows Vista?

I just purchased a new Gateway with Windows Vista to replace my Dell with XP. Ever since I purchased my Gateway, I am unable to sync any iTunes purchases or material imported from CDs to my iPod 30GB. I keep receiving the ~69 message "Unable to sync to iPod. An unknown error occurred. (~69)." Following this error, the iPod only seems to sync the songs that I've recently played on my iPod when it's been disconnected from my computer.
Is this a problem with my iPod, Vista, or some combination of the two? I do not see any songs that should be causing a problem, and my entire library synced with no problems on the Dell XP machine.

Unfortunately, I tried every solution on the page (including restoring) and it still doesn't work. I thought the problem was because of a bad video file that iTunes warned me to delete, but that doesn't work at all.
There has to be an issue with Vista. The iPod worked just fine on my Dell with Windows XP. As soon as I switched computers, it stopped working. What issues does iPod have with Vista?

How to install ubuntu along with windows 7

I have HP 15-r062TU. In that i am install windows 7 64bit os. Now i would like to install ubuntu 12.04 or 14.04 LTS os along side windows 7.
For first booting from usb/cd-rom it shows along side with windows after hitting continue button it reboots from the begin and starts all stages and shows without alongside with windows option during installation.
Please help me. Thanks in advance.
I made a mistake that i was completely removed ubuntu operating system includeing HP_Tool hard disk partion also from pre installed ubuntu os.

Hi,
Please use the following instructions:
http://www.dedoimedo.com/computers/dual-boot-windows-7-ubuntu.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Install Error 0008 with WebWorks App

I have a problem with an app I wrote for BB10 and Playbook.
The app is accepted in the Blackberry World without any problems. But now the clients are complaining, that they are getting an install error 0008 after buying that app and installing on their playbook.
I myself now also bought my own app and had to discover, that I got the same error on my playbook.
At first this app was ported from Android, but the actual version was completly rewritten using HTML5 and WebWorks.
Searching the internet, I found, that it could be a signing error and I had to verify the signing with "blackberry-signer -verify <BAR_File>.bar". I did the verifying and it told me "Info: Bar verified" - so the bar-file should be ok.
If I deploy that bar-file to my playbook, it's working without any problems. But buying and installing from the Blackberry World gives the install error 0008 - and it doesn't matter, whether the app is already on the the playbook or not and if the developer mode is switched on or off.
I hope, that someone has an idea, whats going wrong here and can help me.
Thanks a lot from Germany

You'd probably have more success in either the WebWorks or BlackBerry World developer forums:
http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/bd-p/browser_dev
http://supportforums.blackberry.com/t5/BlackBerry-World-Development/bd-p/appworld_dev
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands

Conexant audio device driver won't install on T510 with windows XP SP2

I am having trouble in installing audio driver for Conexant audio device on an SSD with windows XP SP2 installed already. After running the installer, it tries for a while, and says media device can't be found. But booting from the win7-loaded internal drive, I can see it in the device manager. I also see a few devices like base system device(?) in 'Other devices' category. Could you help me get audio on the windows XP?
Solved!
Go to Solution.

Hi,
Thank you very much for your reply that led me to helpful information. Unfortunately, it didn't fix the issue, but I think I'm closer to the resolution of this issue.
So, I believed I installed Intel chip set and power management drivers, but did uninstall and re-install including .NET F/W 3.5. Unfortunately it didn't work.
Your link led to pages of unknown/driver-less drivers and made me check more detail. I had only 2 PCI devices left in 'Other devices' category, so I checked the details of those as below:
1. PCI\VEN_10DE&DEV_0BE3: I searched this item on the web, finding that the vendor is Nvidia, but could find device 0x0be3.
2. PCI\VEN_8086&DEV3B56: this is vendor Intel, but again no device found. The closest one is SoL device, though.
So, it appears somehow the Conexant audio device is not even in 'Other device' category, and the intaller can't find the device. I wonder if some other driver grabbed this device, so it's not available for driver installation. I will do more investigation, but please help me address this. Thank you again, and in advance.
P.S. : I don't see the SoL driver installed after installing Intel drivers, and there is no 'Ports' category in the device manager, either.

Issues installing Acrobat XI with Windows 7 64 bit

Trying to install acrobat reader on a new computer build with Windows 7 64 bit.
The installer file downloads OK and executes OK, but as it start to install I get a blank, small, dark grey window "Adobe Reader Installer" Completely blank except for the border and title, no buttons, no words.
I've tried saving and running the installer with the same results. Tried running Microsoft fixit with the same results.
What next?

The same question is posted multiple times every day, and the answer is always the same: use the offline installer from http://get.adobe.com/reader/enterprise/
B.t.w. the name of the software is Adobe Reader, not Acrobat or Acrobat Reader.

Installing Elements 11 with Windows 8.. app??

I'm trying to download and install Photoshop Elements 11 on my computer with Windows 8. I can download it, but then I need to get an app to open it. What app do I need? I tried one that it suggested and it didn't work. Then I just had to download it all over again. So frustrating! Any help is appreciated! Thanks!

you need both the exe and the 7z. download file 2 of 2 (the exe), put both the 7z and exe in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Installing QT Pro with Windows Vista

Recently purchased new computer with Windows Vista Home Premium OS. Downloaded QT version7. Tried to use QT Pro license key that worked for QT7 on my previous computer but it won't work. Any reason it shouldn't? Any suggestions?
HP d4790y Other OS Windows Vista Home Premium

Make sure you're entering in both the user name and key code exactly as in the email Apple sent you. Any error in either, including leaving off a salutation (for instance, if the email says "Mr. John Smith") will cause the registration to error.
Also, make sure that your key is for QuickTime 7 for Windows. A key for an earlier version of QuickTime, or a key for the Mac version of QuickTime, will not work.

Install error DF037 with Acrobat X Pro?

Hi there, just installed CS6 download and had error DF037 with Acrobat X Pro. Anyone know how to fix? Thanks Rosa

Hi rosamac01,
DF037 error is a permission related error. You can find details on how to resolve this error at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
You can locate the remainder of the errors and solutions under Installation, launch log errors | CS5, CS5.5, CS6, CCM - http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html.

Install error 0X80080001 with Windows 7 RC1

Similar Messages

Maybe you are looking for