Install error -16, missing jrunsvc

Dear all,
We have just tried to install a cf mx 6.1 on a Microsoft
Windows Server 2003, Enterprise Edition Service Pack 1 , but
unforturnately it failed with the following error:
ANT Script Error:
Status: ERROR
Additional Notes: ERROR - 16:
C:\CFusionMX/runtime/bin/jrunsvc.exe does not exist or is not a
file
Any ideas ?
The machine config are:
Processor: 4 x Intel Xeon /2.667GHz
Memory: 4 GB
Disk: 2 x 67.83GB - RAID-1
8 x 279.33GB - RAID-5 with HotSpare
FileSystems: RAID-1
C: 36GB
E: 31.82GB
RAID-5
P: 1676.35GB (Data)

Try following steps 2-4 in this technote
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=228c3aaa
The errors it covers are different but I suspect you might be
able to resolve your problem using one of them.

Similar Messages

Confused about install errors and missing folders? rdbms not existent?

Hey there,
I installed Oracle 11g on my Windows 7 laptop.
I tried doing the post installation steps and one of them was run the utlrp script from the ORACLE_HOME\rdbms\admin\ folder. I searched my whole pc for the sql file or even the /rdbms folder and it is non existent on my laptop.
I didn't receive any errors, it was a clean install so I am a little confused.
On a side note, when I tried to install SQL Developer, it says:
Cannot find a J2SE SDK installed at path C:\Program Files etc
I downloaded the JDK from the java website so that error went away, now I got this error when I try and run the install:
Unable to launch java virtual machine located at path C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll
Any help is appreciated!
Thanks!

do you see the java folder at oracle directory or in program file
C:\Program Files(x86)Java\jdk1.6.0_21\bin\msvcr71.dll --- it is installed on program file
Follow the steps below. to set the JAVA_HOME
1.From your desktop, right-click My Computer and select the Properties option.
2.In the System Properties window, click on the Advanced tab.
3.In the Advanced section, click the Environment Variables button.
4.Finally, in the Environment Variables window (as shown below), highlight the Path variable in the Systems Variable section and click the Edit button. Add or modify the path lines with the paths you wish the computer to access. Each different directory is separated with a semicolon as shown below.
5.Add the code to the existing System variable path shown in the blue highlighted section in the picture below. Do not delete the original variable; you are only adding code to it
http://mindprod.com/jgloss/jdk.html

What is the problem with the newest version of iTunes (Failed to install - error 7

What is the problem with the newest version of iTunes (Failed to install - error 7 & missing MSVCR80.dll) - the DLL is not missing. tgried to install today and it failed - what a waste.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Adobe Flash Player (General install error) *****! Mach_Kernal missing?

Never had a problem updating Adobe Flash Player over the last maybe 10 times, It downloads to 50% and then bottoms out with a (general install error) message. So the I uninstalled and tried to re-install to no avail.
I don't know if I updated since updating to 10.8.5 but I read that the (Mach_Kernal) was found on people's (Documents) folder and some people deleted this but I don't remember if I ever got this when I updated. This was a blunder when updating to 10.8.5 and Apple was aware of it.
If that file isn't there is will cause Adobe Flash Player to fail.
I tried several Sudo commmands in Terminal to find the invisible (Mach_Kernel) file but when I type that in it just comes up with a message (No such thing found) Then I tried another Sudo command which would install it if it was missing and it comes up with the same thing (no such file or directory found).
Anyone know where this file resides and what folder it's in and can direct me exactly how to get to it to find out if it's still on my machine? As I said the Sudo commands came up with no results.
Thanks for your responses!

I don't know what you mean by clone your setup. Exactly what the whole OS? on an external drive. I do have an external drive but don't know how to back up the whole OS.
You use a separate partition (much preferably on a different physical drive) to make an exact copy of your current startup drive. At any time, you can choose to boot to it. Time Machine is a nice idea in that it automatically keeps various iterations of your data for you so you can go back to older versions of a document and such, but is (in my personal opinion) the clumsiest way possible to restore a hard drive.
You can create a clone with Disk Utility, SuperDuper!, or Carbon Copy Cloner. The last two are third party apps which can perform extra abilities to make clone backups easier. I use the registered version of SuperDuper! myself, but CCC works just as well.
Once you make a clone of your startup drive, it is just what it implies. You have an exact copy of whatever drive you clone to another drive/partition. So instead of going through the very roundabout way of restoring a drive by reinstalling the OS and attaching a Time Machine backup to the reinstall on the fly, you simply boot to your clone and copy it back. Done. Takes way, WAY less time to get back up and running.
But if I do a re-install from that it'll bring back my lost stuff but will also bring back the old crap again. So what good would it do.
Yes, that could be an issue, but at least you'd be back to your last Time Machine backup state.
Plus No! I searched the App store and OS X Mountain Lion woulnd't even come up.
Open the App Store app and click on Store > View My Account. Click on the Manage link to unhide redownloadable purchases. Unhide Mountain Lion so it appears under the Purchases tab again.
Where did you read that Apple fixed this 10.8.5 Kernal problem?
A few users noted it on these forums about a week after the bug was noticed. They said the 10.8.5 update and full download of ML were fixed. I haven't checked it myself. It's very easy to properly hide the mach_kernel file if necessary.
Enter this in Terminal, or copy/paste the line below into Terminal:
sudo chflags hidden /mach_kernel
It will then ask for your admin password to complete the command. After that, the kernel should be hidden.
Well it wouldn't do me any good if I brought it back from Time Machine because the error is in the back up.
Yes, that is what would happen. I don't think you have any control over an OS/Time Machine reinstall. You will always be put back at your last backup state.
Furthemore if it's in your past purchases (You should't have to pay for it)! Why would I pay for it when it's in my past purchases with a download button?
You absolutely should not have to. Once purchased, it's yours. I've got Lion and Mountain Lion on bootable USB drives I made from the downloads. I can boot my Mac to those at any time and reinstall the OS. I'm going to do the same thing with Mavericks, just haven't done it yet.

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,

How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
@ Alternatively purchase an Elements 9 or 10. Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
Apologies if I am using this incorrectly. My first time here

Hi. Thanks for coming back to me. I am using Mountain Leopard (OSX 10.6.8). Had major problem and have re-formatted my H/D and re-installing software. Must have lost a file in the process. Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.

Photosmart Install Error: HPZSETUP.EXE Missing

Trying to re-install my Photosmart C7280 becuase it all of a sudden stopped working. I'm performing the re-install using the setup file I downloaded from the HP site: PS_AIO_02_Net_Full_Win_WW_130_140 (1). My system is a Windows 7 PC. I keep getting an error message stating that "the system can't find the following file ... hpzsetup.exe". Then as the install tries to complete an uninstall to clean-up what it left behind, the uninstaller fails. I have posted eachof the install errors I received. Despite following the Installation error recovery steps, this happens each time i attempt to re-install. Anyone ever run into this and know how to get past it?
This question was solved.
View Solution.

Hi Weho77,
Follow the steps below, and let me know what happens?
Step one: Clear temp directory
Type %temp% in the run or search for programs and files field
Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-71739-3&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know if you are able to successfully install the software and driver, and are able to print & scan?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error message: Missing PDF maker files in Word 2007

OK, I am beyond frustrated. I have had nothing but trouble with Windows Vista and Adobe Acrobat. Please help!!!
What happens: first, the pdf addin for Word 2007 suddenly becomes disabled, for no apparent reason. Forget about trying to re-enable it through the Add-Ins menu, because Word tells me that the "connected state of Office Add-Ins registered in the HKEY_LOCAL_MACHINE cannot be changed". This is a problem for me, because I use a special font (Vietnamese) that sometimes gets corrupted when running pdf maker. The only consistent way I have found to avoid this problem is to run the pdf maker as "Quick PDF" and as far as I can see that option is only available through the pdf addin in Word, I have never been able to find it when I open the Acrobat program and create a pdf from there.
Second problem: shortly after the pdf addin becomes disabled, my Acrobat program loses the ability to create pdfs altogether. I get the error message "Missing PDF maker files". Yes, I have tried repairing the installation and re-starting my computer per the instructions given. It doesn't fix the problem. I also tried looking in the Knowledge Database on this website, but it appears that the instructions they have to fix the problem there are for earlier versions of Word, not 2007, because my version of word does not look like the version of Word in their little videos.
This is the second time this has happened. The first time I resolved the problem by a) re-installing Acrobat, which is a pain because it involves calling Adobe and wading through their customer service to get a new installation number, and b) paying a computer repair service to dig deep into the guts of my computer and convince it to change the Office Add-ins to allow the pdf addin again. It worked for about 6 months, and now I have the same problem again. For some reason Vista is spontaneously disabling Acrobat.
I simply cannot deal with this every few months. We all know that Vista is a crappy program, but I run a business and I need a program that works with whatever crappy program Microsoft puts out. Please, can anyone give me suggestions about how to re-enable these functions when Vista disables them?
Thanks in advance!
Alycia

for Office 2007, see if this Microsoft product will work for you
http://www.microsoft.com/downloads/details.aspx?FamilyId=4D951911-3E7E-4AE6-B059-A2E79ED87 041&displaylang=en

I get the error message "Missing PDFMaker files" when trying to convert a microsoft word document(.docx)

When I right click the word file and select Convert to Adobe PDF, I get the error message "Missing PDFMaker files".
Im using Windows Vista Home Premium, Service Pack 2, 32 bit operating system.
Im using Microsoft Office Home and Student 2010
I have Adobe Reader X installed
Thanks

Hi RhodaMcP,
You might want to check the KB: http://helpx.adobe.com/acrobat/kb/troubleshoot-acrobat-pdfmaker-problems-office.html
Regards,
Rave

Packer install error pgp signature

I was running AppSet-Qt and in Aur part it said to enable package support you have to install packer. I tried to install packer with pacman -S but I keep getting errors
packer-20140817-1-any 9.5 KiB 175K/s 00:00 [#####################] 100%
(3/3) checking keys in keyring [#####################] 100%
(3/3) checking package integrity [#####################] 100%
error: packer: missing required signature
:: File /var/cache/pacman/pkg/packer-20140817-1-any.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I tried pacman -Sw and still the same. I also get the same with yaourt packer.

leonax wrote:Is aur packages a no no then?
Please read the wiki https://wiki.archlinux.org/index.php/AUR

Crystal Reports 2011 Demo Install Error

Downloaded the trial of Crystal Reports 2011 today (installer says it is SP2) and it will not install. Searched the forums and the 'net and not finding anything that appears to be applicable to my situation, so here goes:
Windows 7 64-bit Pro SP 1, all updates
Crystal Reports 8.5 and 9.2 installed
Visual Studio 2010 Pro with all updates
RAD Studio XE2 with latest updates
Crystal Reports for Visual Studio 2010
I run the setup as an admin, Windows 7 compatibility checked, etc. as suggested in other posts.
I am getting a Visual C++ runtime library error "This application has requested the Runtime to terminate it in an unusual way."
I get this initially when the installer says "Installing Deployment Unit:" and the unit listed is:
tp.microsoft.vcredist-7.1-core-32,14.0.0.760
I have a screenshot, but the above gives relevant information. If I click OK on the error, I will continuously get it for all other files and then get the pleasure of getting it again when I cancel the installation. We have been considering moving to SSRS, but wanted to give the 2011 Crystal a shot since we have several hundred reports developed in it.
Thanks in advance for any help and apologies if I missed something in my searching. Any ideas??

Hello,
First thing is CR 8.5 is not side by side compatible, so uninstall it. I don't see this causing install issues but just an FYI...
I assume you downloaded it from the Trial version Page then or was it in Service Market Place?
SP 2 is both Full and Incremental so I'll start the download and test also. It may be they linked to the wrong file.
How big was the file you downloaded?
Also, have a look at this post: SAP Crystal Reports 2011: Error INS00140 and other install errors , there may be something going on with one of those MS Kbases causing the issue, or could be something new.
I checked with the PM for Cr 2011 and there should be both incremental and a full build available, possibly they did link it to the wrong one...
Thanks again
Don
Oh and check that you have .NET 2.0 to 4.0 Framework installed, CR requires is.
Don
Edited by: Don Williams on Sep 28, 2011 1:49 PM

Business Explorer install error

Hello all,
I am currently trying to update our existing Business Explorer 3.5 (patch level 11) to the latest patch version 13 with the sapadmin tool. The installation works fine but when we try to open a query in business explorer excel addin I get the following error:
<install error> Missing ActiveX component: Business Explorer Open Dialog.
The version information states that Bex is at patch level 13.
If I then manually install the patch (no objections that i'm already at patch level 13 here), everything works fine. Any thoughts on this?
Thanks

Hey all,
Good news, i found out what the problem was. One of the dll's needed was not registered:
wdbfodlg.dll
I now manually registered this dll in the install script, but it remains strange that it was not included in the normal installation via SMS.
Greetings,
Tom Willems

Oracle enterprise Linux and 10gR2 instalation error

I have installed Oracle Unbreakable Linux (from 4 CD's).
When tried to install Oracle 10gR2 I got error that displays when it's 83 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk
I have installed developement pack (aditional rpm packages installed), but I don't know what's happening.
I read on other forum (Error installing Oracle Client on Red Hat 4.0 that I might miss some package.
My system is fully 32 bit, so I think I do not need any 64 bit package, like suggested in that thread!?
Second question:
I thought that "Unbreakable Linux from Oracle" has all additional packages prepared for Oracle installation ...at least for current release 10gR2?
Is that true?
Third one:
If I use croatian keyboard, I cannot type "_" (underscore sign. How to have that (for me very important key)?
Thanks...
Message was edited by:
Funky

make.log:
(if [ "compile" = "binary" ] ; then \
/oracle/10g/bin/gennfgt > nnfgt.c ;\
TARGET_BINARY_INTERFACE= ;\
export TARGET_BINARY_INTERFACE ;\
gcc -c nnfgt.c ;\
-rm -f /oracle/10g/lib/nnfgt.o ;\
-mv nnfgt.o /oracle/10g/lib/ ;\
/usr/bin/ar rv /oracle/10g/lib/libn10.a /oracle/10g/lib/nnfgt.o ; fi)
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/oracle/10g//oracle/10g/bin/genclntsh
/oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/oracle/10g//oracle/10g/bin/genclntsh
/oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
install.log:
INFO: /oracle/10g/bin/genclntsh
INFO: /oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/10g/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2007-05-31_11-43-39AM.log' for details.
Exception Severity: 1
THX!
error pic:
http://i15.tinypic.com/4kx34a0.png
Message was edited by:
Funky

Error message: "Missing required plugins" - Illustrator CS3 will not load

I am running CS3 Web Prem on Vista, dual core Athlon with 2g Ram.
Illustrator has stopped working - gives error message: "Missing required plugins. Pathfinder Suite." Or it says "Missing required plugins. ArtConverters.aip PDFformat.aip Pathfinder suite.aip Rasterize.aip"
I have tried the suggestions from knowledge base article - I have tried deleting AIprefs; I have also tried in new user account - initially worked but not on opening program a second time. I have also re-installed Illustrator.
Any other solutions?

Glad to hear it.
Not sure what possible nuances to performance or memory management there may be to running in compatibility mode. Since I can't run in any other mode, it is hard to make a comparison.
It seems to run fine though, for me.
There should be a Windows Update that came out in the last day or so that is supposed to address this issue (http://support.microsoft.com/kb/947562). At least thats what it says.
BUT, after that fiasco with SP1, I am real reluctant to do any more updates.
SP1 toasted my ability to connect with network resources, external and some internal hard drives, ALL my USB equipment failed to connect anymore. I removed SP1 (uninstalled it per the instructions on the MS KB) but that process trashed the OS and required a complete clean re-install of Vista. A week later I am pretty much back to where I should be (see, my system backups were with SP1. Brilliant, eh?).
Still have to run many so-called "Vista Compatible" applications in this compatability mode though.

After Effects Error: Tracker_Register: Missing Suite ( 1 :: 0 )

Product: AE CS4
Version: 9.0
OS: OS X 10.5.7
One day this error just sprung up on me, after having worked fine for quite a while. Strangely, I have scoured the internet and found no mention of this specific error. The error happens upon launching After Effects and after clicking OK, the application shuts down. It does not ever reach the user interface. The loading splash screen comes up and then the errors come up shortly after.
The two error messages come up one after the other and read in this order:
"After Effects error: Tracker_Register: missing suite. ( 1 :: 0 )"
"After Effects can't continue: Failed to register built-in motion tracker."
I have attempted to reinstall After Effects entirely, even going as far as to wipe all the associated files that are left behind after an uninstall.
I will attempt to update AE and will report back the progress on that.
UPDATE
Updated AE to 9.0.2
There are now three errors, including the above two. The third error reads: "After Effects can't continue: unexpected failure during application startup"

Okay, let's do this one step at a time. Removing components without proper uninstall procedures can indeed be dangerous, but I don't think that's the issue here. If the program reports an entire suite missing (which is merely another way of saying that some pieces of its core code have gone anywhere but here), one of the system libraries is not initializing. This is extremely rare on Macs, so this is even more puzzling. As a first step, I would definitely run a tool like OnyX or Apple's own Repair Permissions and disk health utility to check disk integrity. The thing is, the exact spot on the drive could be damaged and it's in the nature of OSX to not waste space, so it will always try to place files in the same physical spot, if they have the same name and similar properties to the predecessor and that region may actualyl have problems. Therefore updating AE might not solve the matter. Second, check the language settings on the files in your AE directory using right-click - Information. This also works with multiple files selected. If they have different settings, you will get a warning and may need to select them separately. On the info panel, have a look at the language options. If the language in which you run AE is not enabled or you have multiple instances of the same language checked (OSX again stores this per file redundantly), disable/ enable the check marks until everything seems right. While you are on the panel, also have a look at the compatibility infdo (it should refer to intel compatibility) and of course the user permission settings. All users must be at least able to read the files. From inside AE, check, whether you are using the "accelerate panels" option in the prefs. Since tracking is a layer window feature, it may cause issues, if there is something not right with your graphics card settings. Speaking of which, check your monitor settings if everything is right. As a last thing, definitely check your Quicktime install. I'm not aware of any definite problems, but QT is always a good candidate for causing issues of any kind.
Mylenium

HELP! ERROR MESSAGE: Missing PDFMaker Files

Hello-
My Adobe Acrobat Professional 7.0 has been running perfectly fine for over a year now. However, today I went to create a pdf. and I received the following error message:
Missing PDFMaker Files
Do you want to run the installer in repair mode?
So I said yes, and then restarted my computer. That didn't fix it.
I uninstalled Adobe Acrobat Professional and re-installed it. That didn't fix it.
I really have no idea what to do. It's extremely frustrating because I have CS2 and the phone support people said they couldn't help me because I don't have the newer version. I'm looking for any sort of solution to this problem because it makes this program virtually useless.
Thanks in advance for your help.
Chris

ok i just got mine working. you have 7 i have 8, but its still worth a try. here are the steps i took. i hope this helps good luck
i did this in excel, so ill use excel as the application, otherwise its outlook or word or whatever your application name is ok oh i have 07 office
- open excel
- click the office button (the big yellow button at the top left)
- click excel options button (at the bottom)
- click add ins on the left side dialog box
- do one of the following
- if pdfmoutlook or acrobat pdfmaker office COM addin is not listed, choose COM Add ins form the manage pop-up menu (at the bottom) and click go
- if pdfmoutlook or acrobat pdfmaker office COM addin is listed under Disabled Application Addin, select disabled items from the manage pop up menu and click go
- select pdfmoutlook or acrobat pdfmaker office COM addin and click ok
- restart your application (again i was in excel)
i choose acrobat pdfmaker not outlook
i googled
activate PDFMaker in Microsaoft Office and clicked on the one that says
acrobat 9 pro extended convert a file using pdf maker
for some reason (im not very good with these forums) i cant copy the link into this wondow and its extremly long
it begins
help.adobe.com/en_US and so on....so google that and click on that link
let me know if this owrked ok

Install error -16, missing jrunsvc

Similar Messages

Maybe you are looking for