Install error for Solaris 8 intel
When my Solaris 8 install gets to the spot where it asks for the language to use (0-9, english is 0, which I want), anything I hit on my keyboard sends bogus VT codes to the screen. Earlier in the install process (when it asks for solaris interactive vs custom for example), my keyboard works fine, I can choose 1 or 2 there.
Has anyone else seen the problem? I've tried multiple keyboards, and they all do the same thing.
Sounds like the dell keyboard problem:
http://groups.yahoo.com/group/solarisonintel/message/20087
The workaround is to attach an USB keyboard.
Similar Messages
-
I would like to use my PC (x86 platform) to install Solaris 8 for Intel as a Database server. But I cannot found any information of Oracle 9i Database for Solaris Intel platform. WHere I can find it? Or Oracle don't support for Solaris for Intel (I found an Oracle 9i Database for Solaris SPARC only).
Best regardsThe last version of Oracle for Solaris X86 was Oracle 8.1.7...
-
Oracle 9 for Solaris (Intel) x86?
Did oracle drop support for Solaris (Intel) x86? I run a shop with a large scale intel server running Solaris 9 (x86) and would like to try out Oracle 9i on it.
Please advise: [email protected]
Thanks!You can find information about Oracle product certifications here,
http://otn.oracle.com/support/metalink/content.html
You can also find information about desupported platforms in the same place. This link is available from "Get Support" navigation element on OTN home page. -
After installed language for solaris, how to use it in Netscape
After installed languages for solaris,
How can I see them in Netscape:
View/Character set/...
Do i need to modify some files?
Thanks
JoannaHi,
Not certain what your external system is, but it may be worthwhile to go through the QM-IDI documentation to see if that meets your requirements
http://help.sap.com/saphelp_erp60_sp/helpdata/en/26/b43927506511d182c20000e829fbfe/frameset.htm
Alternately, take a look at BAPI_INSPOPER_GETDETAIL to determine how the lot expects to receive results, and BAPI_INSPOPER_RECORDRESULTS to set the results accordingly
Regards,
JL -
8i Database for Solaris Intel Platform
I want to download 8i Database for Solaris Intel Platform, but there is no such link at OTN software download.
I will greatly appreciate any help in downloading above mentioned software.
Regards
Muhammad SirajI believe this is the plan. However, there is a bunch of work yet to do before
this can be qualified and supported. Stay tuned.
-- richard -
Installing isqlplus for Solaris 8/Oracle 9i
Does anyone know how I can install isqlplus for Solaris 8? It does not seem to be installed with the Oracle 9.0.1 Enterprise Ediition full installation.
Thanks.Did you resolve this issue?
-
I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel)
I need to download Oracle 8i Release 2 (8.1.6) for Solaris (Intel) but haven't found it in the web page.
Does someone knows where to get it.
Thanks.This download is not available on the OTN site. We recommend that if you live within the United States or Canada to check with the Oracle Store for product availability:http://otn.oracle.com/software/store/discount.html
Best Regards, OTN Team -
Install Errors for 9i on Solaris 9
I am installing Oracle 9i Solaris 9 and the install went well until the Oracle Database Configuration Assistant. It failed with the following errors:
Oracle Database Configuration Assistant Errors for install
ORA-27303
ORA-27146
ORA-27300
ORA-27301
ORA-27302
Can someone enlighten me as to what these mean?
Message was edited by:
d072330For all of those newbies like me I forgot to set some system settings. Here are the system settings I needed to put into /etc/system:
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=3000
set semsys:seminfo_semmsl= 256
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=200
set shmsys:shminfo_shmseg=20 -
Can you install 9i on Solaris Intel ?
Can you install Oracle 9i on Solaris Intel ? 32 / 64 bit
Hello dear people,
I'm trying to install the 9i Database for Sun SPARC (32-bit) on an Intel machine with Solaris 8 running. I followed all steps of the installation documentation, but when I try to execute the runInstaller programm, I get always the following error:
Syntax error at row 1: '(' unexpected.
Can you tell me, which is actually the terminal Release for Intel Solaris? I were very pleased.
Thanks,
Reinaldo -
Oracle 8i for solaris(intel based machine) software download
hi sir,
i wnat oracle 8i software on intel(solaris) platform, i am not abel to find out in oraclr site, plz give me replay , where can i get
regds
jani
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename
- Date/Time
- Browser + Version
- O/S + Version
- Error MsgThis is what you have available in OTN.
Oracle8i Enterprise Edition Downloads
Note: Oracle9i, Oracle's newest database, can be downloaded here.
Linux
Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel), with OPS
Windows
Oracle8i Enterprise/Standard Edition Release 3 (8.1.7) for Windows 2000/NT
Solaris
Oracle8i Enterprise Edition Release 3 (8.1.7) for Sun SPARC Solaris (64 and 32 bit)
UNIX
Oracle8i Enterprise Edition Release 3 (8.1.7) for AIX-Based systems (64 and 32 bit)
Oracle8i Enterprise Edition (64-bit) Release 3 (8.1.7) for HP 9000 Series HP-UX
Oracle8i Enterprise Edition Release 3 (8.1.7) for Compaq Tru64 UNIX
http://otn.oracle.com/software/products/oracle8i/index.html
Joel Pérez -
Install Oracle on Solaris Intel
I have purchased Oracle8i Enterprise Edition, Release 2(8.1.6) for Intel Unix(Solaris Intel), and have installed successfully. However, as soon as I shut down and reboot the machine, I can connect to sqlplus
internal, but I cannot log into the database as "sys".
The procedure I did is as following:
Immediately after the installation (message says "installation successful"),
1. Log in as user "oracle" in the Bourne shell.
2. At the $ prompt, type "sqlplus internal"
3. It come out with SQL prompt
4. SQL> show user ( I typed show user under SQL prompt)
5. Then it return "sys"
Things seemed to work fine at that point.
But, when I shut down and reboot the machine and logon again, and follow the same steps 1-5 as above, it did not work. When I did the "show user" command at SQL prompt, the user is not "sys", instead it returned
" ". I followed the installation guide and tried to reinstall 5 times.
Every time I had the same problem. I was wondering if this is a bug in
the CD. How can I solve it?
Thanks,
LillianGot past this spot... Thanks to the beefier shared memory/semaphore settings in this website (from another response in this forum)
http://www.dbspecialists.com/4dbas/presos/oracle817solaris.html -
Install OSB in Solaris (Intel)
Hello,
I am trying to install OSB 10.3 on a Mac Intel with SUN VM running Solaris 10. I download the binary from this link
http://www.oracle.com/technology/software/products/osb/index.html
Labeled:
Download for Solaris Operating System (SPARC 32-bit)
But it does not work.
Trying to find whats wrong I download the BPM Enterprise Installer from this place
http://www.oracle.com/technology/software/products/bpm/index.html
Labeled:
for Solaris Operating System (SPARC 64-bit)
and it works
Do you know if there is any installer of OSB for SPARC 64 or what happened with the installer?
bash-3.00$ ./osb1031_wls103_solaris32.bin
bash: ./ osb1031_wls103_solaris32.bin: Argumento no valido bash-3.00$
Thanks in advanceHi,
I found the following information:
bash -3.00#file OracleBPMEnterpriseWL103100_sol.bin
OracleBPMEnterpriseWL103100_sol.bin: secuencia de órdenes de shell ejecutable
bash -3.00#file server103_solaris32.bin
server103_solaris32.bin: ELF 32 bits MSB ejecutable SPARC Version 1, enlazado dinámicamente, quitado
bash -3.00#file osb1031_wls103_solaris32.bin
osb1031_wls103_solaris32.bin ELF 32 bits MSB ejecutable SPARC Version 1, enlazado dinámicamente, quitado
bash -3.00#
Why it worked is because the first one is a shell and the others are exec compiled for SPARC.
My future proyect will run in solaris thats the reason I want to test in this enviroment. Thanks to everybody I must wait until the server with sparc arrives. -
Adding 3COM 3C905C-TX for Solaris Intel
Hi there,
I am trying to add a 3COM 3C905C-TX card for Solaris 8/Intel.
Since it's a PCI card, do i have to specify the irq, address etc
in /platform/../elx.conf, if yes how and where do i get this
info from? i followed the other procedures in the sun doc link
provided several threads ago but ifconfig is still not recognizing
the interface. how do i know for sure if the NIC itself is installed
or not? any insights would be greatly appreciated!!!
vinny.First you should probably install the latest solaris 8 elxl driver patch 109867-03 / 109866-XX because this patch adds support for the 3C905C cards.
See the "Patches" link on the
Solaris Driver Download page.
(People have also reported that the 3C905C card works without the
patch, but you have to
add entries to certain system files).
PCI cards are self-identifying, so there's not need to add irq's
dma channels or I/O ports to
a driver conf file.
Make sure you perform a reconfiguration boot (either by
specifying option "-r" on the boot command line or by a
"touch /reconfigure" before you reboot solaris).
The command "ifconfig elxl0 plumb" should add an interface
for the 3com network card, afterwards you can use
"ifconfig elxl0 inet 12.34.56.78", ... to configure ip addresses, etc.
If this all works OK, create a new file "/etc/hostname.elxl0" and
insert a single line with the IP-address for the 3com interface
into that file. -
Install Errors for Catalyst Pannini
I can't install Flash Catalyst Pannini on my 64 bit Windows 7 PC. I have the CS5 Master Suite installed and AIR and Flash latest versions. Is there anyway to get this installed so I can do mobile development?
Here's the error info:
Exit Code: 7
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 23 error(s), 27 warning(s)
WARNING: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and the session payload {00C5CA45-DFBA-4ceb-9DF2-E932233CCF68} Adobe Flash Player 10 Plugin has no upgrage/conflict relationship with it.
WARNING: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the session payload {B65AD0E3-C64A-4b91-BAEF-0EA667697FB1} Adobe Flash Player 10 ActiveX has no upgrage/conflict relationship with it.
WARNING: OS requirements not met for {2CBB867A-D1BE-4937-BD7A-E97999474721}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Warning: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Warning: {2F6B67F4-A2BB-45D7-A80C-25FF646CC1C5} Adobe Player for Embedding will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Warning: {68CEA5C9-2964-4ECB-84A4-D77C511332BC} Adobe Media Encoder CS5 X64 will not be repaired, due to updated patch of STI and one of the top level payload is being installed.
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: Verifying payload integerity : Failed with code 1
ERROR: MsiConfigureProductEx failed with error: 1612
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Microsoft_VC90_ATL_x86: Install failed
ERROR: - Adobe Media Player: Install failed
ERROR: - Microsoft_VC90_CRT_x86: Install failed
ERROR: - Microsoft_VC80_ATL_x86: Install failed
ERROR: - Adobe Flash Catalyst Panini: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - Microsoft_VC90_MFC_x86: Install failed
ERROR: - AdobeTypeSupport CS5: Install failed
ERROR: - Adobe Flash Fonts1: Install failed
ERROR: - Microsoft_VC90_ATL_x86_x64: Install failed
ERROR: - Microsoft_VC90_CRT_x86_x64: Install failed
ERROR: - Microsoft_VC80_CRT_x86: Install failed
ERROR: - Microsoft_VC90_MFC_x86_x64: Install failed
ERROR: - DynamiclinkSupport: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed
ERROR: - AdobeCMaps CS5: Install failed
ERROR: - Microsoft_VC80_MFC_x86: Install failed
ERROR: - Microsoft_VC80_MFCLOC_x86: Install failed
ERROR: - Adobe AIR: Install failedHere's my latest error list with Panini.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 6 warning(s)
WARNING: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin is already installed and the session payload {00C5CA45-DFBA-4ceb-9DF2-E932233CCF68} Adobe Flash Player 10 Plugin has no upgrage/conflict relationship with it.
WARNING: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX is already installed and the session payload {B65AD0E3-C64A-4b91-BAEF-0EA667697FB1} Adobe Flash Player 10 ActiveX has no upgrage/conflict relationship with it.
WARNING: OS requirements not met for {2CBB867A-D1BE-4937-BD7A-E97999474721}
WARNING: OS requirements not met for {68CEA5C9-2964-4ECB-84A4-D77C511332BC}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
ERROR: Verifying payload integerity : Failed with code 1
ERROR: The following payload errors were found during install:
ERROR: - Adobe Flash Player 10 Plugin: Install failed
ERROR: - Adobe Flash Player 10 ActiveX: Install failed -
Oracle 8i/9i for Solaris Intel
Where can I download Oracle 8i or Oracle 9i for Solaris X86 (Intel) ?
The last version of Oracle for Solaris X86 was Oracle 8.1.7...
Maybe you are looking for
-
If I deauthorize all computers, will I lose my library?
will I lose my library if I deauthorize all computers?
-
Hi experts When am trying to register templates using OVAB am getting this error: Registering IG_HTTP to cloud_resource_pool::vm_server_pool started. Connecting to cloud_resource_pool::vm_server_pool for register operation. Connected to cloud_resourc
-
HT1414 How to select a backup?
I backed up my iphone yesterday. Today I lost my contacts so I think yeah I can restore my iphone from the backup. I plug my iphone into itunes and it runs the auto backup. I select restore but the only option I have is the backup just made. So what
-
Is there going to be any official support for Air 3.0 in Flash Pro? It is unclear how to take advantage of some of the new features such as captive runtime for android or native extensions. It would be great if Adobe could communicate either tutori
-
Duke$ - Multiple packages in one jar... again
My jar contains 2 packages. One is my own, the other one is the JNIRegistry from Ice. (Excellent for Windows. Download it at: http://www.trustice.com/java/jnireg/index.shtml ) My application starts from the jar file and works just fine, but as soon a