Install error message after logging off OSX

When logging out of Mavericks, I get an error message on the screen as it goes to black that asks me do I want to abort the installation or continue with the installation. It closes out to the login screen after pressing either button you press, one says "abort" the other states " "continue". This started a few months ago and I can't seem to remember if there was an install issue on an update to an app or if it was something else because you only get the error message when you log out of the user account or shut down the computer. I updated to 10.10.1 and it still appears exactly as with Mavericks OS.
I don't have time to take a screen shot of the message in a yellow box as it disappears quickly, but it reminds me at the log in window in background via a female voice that the MAC needs my attention.
Cant get rid of message, any help appreciated.

Hi ,
Thanks for joining the EE Community.
Have you tried clearing the cache in your web browser or using a different browser?
Thanks
James

Similar Messages

I get a "Landing - Error" message after logging in

I get a "Landing - Error" message after logging in Any ideas?

Hi ,
Thanks for joining the EE Community.
Have you tried clearing the cache in your web browser or using a different browser?
Thanks
James

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

Error message after downloading and install rolled back (using up data limit)

error message after completing install of trial. then program was rolled back. I do not appreciate using up data allotment unnecesarily, people.Thanks for any assistance.

Rhumsike which Adobe software or service are you trying to install? Also which operating system are you using? Finally what is the error message which you are receiving?

I get an error message after downloading the latest update. It says to download only and then to install manually. How do I fix this?

I get an error message after downloading the latest itunes update. It says to download only and then to manually install. How do I do this? Or, is there some way to make the download work? Thank you.

The message is 'errors have occurred, go to tools>download only and try installing manually'. BTW, I am using Google Chrome.

TS1717 I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?

Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden

I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.

I have an older iPod (2005). After years of inactivity I tried to install the cd on my PC. I get the following error message, after several attempts to install: iTunes cannot run because some of its required files are missing. Please re install iTunes.

Did you follow the exact instructions in this Apple support document to remove and re-install iTunes and ALL other Apple software on your XP machine?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
B-rock

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."

I am getting this error message after upgrading to iOS5: "iTunes cannot sync apps to the iPad "ray's iPad" because the apps installed on the iPad could not be determined."
I wiped it out and restored from backup but I am still getting the same message.

I uninstalled and reinstalled iTunes and that fixed it. Here are the specific instructions that I was given.
~~~
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch
~~~
Good Luck!
~R

Getting the error message while logging through work place after upgrade

Hi,
C:\Documents and setting\YP80002\Local Settings\Temporary Internet files\Content.IE5\GTKFGH6L\tx[2].sap
Application not found
Getting the error message while logging through work place.
It is urgent
Thanks,
Sri.

After upgrading the Batch file it worked fine.
Thanks,
Sri.

Trying to update frpm itunes 10 to itunes11, but get error message after installation

I am trying to update my itunes to be compatible with my replaced iphone 4s (apllecare replacement) that is not compatible with my current iTunes 10.6. I have tried several times to upload th enew version of iTunes to no avial getting an error message after a "successful installation" and the itunes reverts to 10.6. Since my imac was an older unit I had to update to OSX 10.6.8 (sucessfully) and increase my RAM. I am 120bucks in the hole plus the 49 dolar surcharge for the iphone replacement and i am still no closer to restoring my phone. Help please

First backup your music and content.
Then delete iTunes 10.6 Drag the application from Finder > Applications to Trash. Empty Trash
Try and install 10.7 first iPhone 4s will work with this. You can find the download here
http://support.apple.com/kb/DL1576
Install it. Does itunes 10.7 now appear? Is your content all there? Connect up your iPhone and start syncing.
From there if you want to you can upgrade to iTunes 11 but it is only necassary if you have an iPhone 5

Error message after burning

I keep getting an error message after I burn a song to CD, telling me it failed when it, in fact worked. I have the latest iTunes software installed.

doug,
i just read a post from bruce on this forum...you may have already seen....here is the copy:
Tried a few more things.....was out of ideas....then came across a post in this forum yesterday by "Ian C" who said he solved his burning problems by deinterlacing the project......decided to give it a try......after a week of trying to unsucessfully save a couple projects as disc images or burning to disc (tried 20 to 30 times at 3 hrs a shot with the 2 problem projects as well as more burning tests with other projects to compare to)...... and trying everything I could think of or find on this board .......I exported the project (full quality) to desktop, then deinterlaced it and reimported it to iMovie.....handed over to iDVD and tried to save as a disk image......worked like a charm.....then tried burning the same project from iDVD to disc......worked again. . I dont pretend to understand much about deinterlacing....but just wondering if anyone knows why it worked? These 2 problem projects (like my other test projects) were created in iMovie...exported to miniDV tape then imported from tape to iMovie...then handed off to iDVD. As I mentioned earlier...I had also tried exporting the project to desktop and reimporting to iMovie without success. I thought I've read in this forum that iMovie/iDVD automatically deinterlaces upon import? Strange that other than Ians post...hav'nt seen this suggestion as a fix for burning errors before in this forum. Is this a known possible fix for this problem? Anyways....at this point I'm just tired and glad something worked
Good Luck!

ITunes 7.7 Won't Install/Error message

Every time I attempt to upgrade I get this error message after the download finishes:
"Errors occurred when installing the updates. If there problem persists update manually"
So is there a way to fix this or how do I upgrade manually?

some folks have been having some success with pgfpdwife's technique in the following post:
pgfpdwife: Re: Could not open key HKEYLOCALMACHINE\Software\Classic\Quicktime.Quicktime\
note carefully that the technique involves a registry edit. be sure to make a backup of any keys you edit. if you're unfamiliar with your registry or registry editing, head to your XP help and support, do a search on registry, and read through the articles that come up.
if you would prefer not to try a registry edit, let's instead try getting an installer log to the Apple Engineers for a look:
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing (if you are seeing one)

LE_SHP_DELIVERY_PROC Error message through Log .

Hi,
I'm working on a BADI LE_SHP_DELIVERY_PROC inside the method FILL_DELIVERY_ITEM. I have to show an error message over here. If i passed like MESSAGE e000(zless) WITH text-006 text-007 it is displaying message but it is come out from the layout of the transaction in scope.
Te be more specific, when the pop up of message comes out and after that the user click on the "Exit" button, the system should go back on the previous layout of the report to allow the user making another selection.
I'm using Vl10D transaction.
Now I'm trying to generate the error message through log by CT_LOG internal table . I have to block the deliveries whichever is creating through this transaction. If for a particular STO there are different loading points then I need to block the deliveries.
I'm trying to block the current delivery using IS_LIKP-LIFSK = 'X' and also I need to block the previous delivery IT_XLIKP-LIFSK = 'X'.
strange thing is happening with STO which has 2 deliveries are getting created (because error msg is not getting tirggered thorugh log), though I have blocked the deliveries.
Could you please let me know how can i populate this error message through log as well as I can block the deliveries?
Thanks in advance,
Abhijit

Hi
To lock the delivery, see Note 198137 - VL10: Customer-specific enhancements / user exits and use this userexits. To populate the log I think that using the structure CT_LOG in the BADI is OK. Check when are called the userexit and BADI.
I hope this helps you
Regards
Eduardo

Install error message after logging off OSX

Similar Messages

Maybe you are looking for