Install error on studio 8 and Mac OS X

I am trying to install Studio 8 on my Mac OS X 10.7.1 and am getting message indicating PowerPC applications are no longer supported. Is there a work around for this error?

Is there a work around for this error?
Afraid not. The software's too old.
Studio 8 is Power PC only. It will not run in OSX Lion (10.7.1) on Intel Macs.
http://www.tuaw.com/2011/07/21/mac-101-how-to-tell-if-an-older-app-will-run-on-os-x-lion/
http://www.retrotechs.net/?p=1581
PS: if you need to upgrade your Adobe software, the current version of Creative Suite (CS5.5) is the last version to which you can upgrade from Studio 8 at discounted upgrade prices.
When CS6 is released (no-one knows the exact date other than Adobe), you will have to pay full price.
In other words, if you're planning to upgrade, now's the time to do it.

Similar Messages

Installing creative suite 5 and mac desktop does not have architecture

Installing creative suite 5 and mac desktop does not have architecture? What do I do?@

attach a screenshot of the error message, if it's in english. otherwise, copy and paste the error message.

Error installing Final Cut Studio and iLife on Leopard

When I upgraded to Leopard, I decided to entirely wipe my boot drive since I was experiencing problems with certain applications (ie: Final Cut Pro) in Tiger. Therefore I've been re-installing all of my applications in Leopard. I've been having some problems though, when I try to install Final Cut Studio, I get this message after a while of it trying to install the Apple Soundtrack Pro loops disc:
http://salsunproductions.com/misc/fcsinstallproblem.jpg
I also get a similar error when trying to install iLife 06.
The strange thing is that I am able to run the Applications fine with the exception that all my Final Cut Studio applications don't remember their serial number and my name/organization. I get this message every time I boot up a Final Cut Studio Application (this is the original Final Cut Studio, PPC)
http://salsunproductions.com/misc/fcssnbootup.jpg
Message was edited by: salilsundresh

As for the registration problem:
http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284
As for the disc install, if you're sure you're disc isn't just scratched, then I guess there's nothing to do but wait for 10.5.1 and see what happens.

Install error on CC and ERROR code 50. Also AE would crash due to full disk cache and close unable to select from menu to change.

I have recently installed and used Creative Cloud and also install several applications. The apps and cc ran fine but Adobe AE would crash upon startup of the app in which is prompted a message stating ...the drive which it is installed on does not have enough memory or disk cache is full. Please change in preferences. I attempt to do so but AE shuts down after I select ok. I installed the cleaner tool and uninstalled all Adobe products and attempted to reinstall creative cloud and now I get a "...We've encountered the following issues: Creative Cloud desktop failed to install. (Error code:50)
I have been trying to resolve this issue for three weeks now which I did finally get it to work by opening the AE by selecting a AE file. I was able to use it 3 times for the amount charged for the monthly fee and I also downloaded several of the other apps but was
unable to use them due to this issue then uninstalled with Adobe cleaner tool!
PLEASE HELP!
Message was edited by: Paul Whitehurst

Jeff,
I have tried to install on another drive after downloading Creative Cloud clean-up and uninstalled all adobe creative cloud. So if I erase my temp folders it might work?
Please help I have basically paid for my 2nd month and only used a few times.
Thanks,
Paul

Itunes install error codes 2503 and 2502

I have purchased a new PC for Windows and cannot install Itunes. I am getting error codes 2503 and 2502. My music is in the Music / itunes file.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

"Invalid Java Home ...." .Installing the JDeveloper Studio Edition ---Mac

I have try every Path OR"JDK Path",and jdev told me: "Invalid Java Home ......" .
I cannot understand this: Ref: http://download.oracle.com/docs/cd/E12839_01/install.1111/e13666/toc.htm
6.2 Specifying the JDK location on Mac OS X Systems
Note: This section is not applicable to the Studio edition.
When you start JDeveloper for the first time, the jdev script prompts you to provide the location of your JDK installation if it cannot locate it. You will need to enter the path to java.exe.
Edited by: user4527807 on 2008/11/28 下午 11:11

A quick search on this forum for Mac would have shown you that there are some extra steps mentioned in the release notes for Mac:
http://www.oracle.com/technology/products/jdev/htdocs/11/knownissues.html#install4

LV8,5 Dev Suite install, error "Measurement Studio for VS2003 not installed""

Hi guys,
Installing LabVIEW 8.5 Developers suite, installed LV8,5 OK, but all otehr products (CVI, Studio, etc) come up with error messages as per attached photo, "measurement Studio for VSXXXX not installed"
When should I have installed this ? which DVD has this ?
Any help apreciated
Cheers
Mathew
Attachments:
LV8.5Install.GIF ‏22 KB

Do you want to install Visual Studio, CVI, etc.? It looks like you are running the device drivers DVD, and must have told it to install All device drivers, rather than just the ones it determined you needed when it scanned your system. So when it tries to install the device drivers for VS and CVI et al, it can't find that software on your PC. If you want that software, they would be on other CD's in your Developer's suite package. Install that, then run the Device Drivers DVD again.
If you only want to install Labview, rerun your DVD for your device drivers again, and only install the features that it wants. I find the device drivers DVD takes a long time to initialize, and I believe that is because it is scanning your PC to detect what other National Instrument products you have installed so it can populate the list of what drivers you need to install.
Message Edited by Ravens Fan on 09-18-2007 11:46 PM

ITunes install errors: MSVCR80.dll and Error 7 (windows error 126)

All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
Thanks

ITunes tried to automatically update today and failed and then I was also getting the MSVCR80.dll error
After trying many things I finally removed all Apple software
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
I was then able to finally successfully install the latest version of iTunes and the software installed correctly and the error went away.
I hope this works for you as well.

Solaris Express Zone install error with SUNWiiimr and SUNWcnetr

Hi all,
I got these errors when installing a new zone on a Solaris Express 1/08 (5.11) on a x64 box:
Installation of these packages generated errors: SUNWiiimr
Installation of these packages generated warnings: SUNWcnetr
The zone creation log shows:
*** package -SUNWiiimr- failed to install with fatal errors:
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postin stall: /export/zones/newzone/root/lib/postrun: not found
/export/zones/newzone/root/var/sadm/pkg/SUNWiiimr/install/postinstall: /export/zones/newzone/root/lib/postrun: not found
pkgadd: ERROR: postinstall script did not complete successfully
Installation of -SUNWiiimr- on zone -newzone- failed.
*** package -SUNWcnetr- installed with warnings:
pkgadd: ERROR: unable to create package object -/export/zones/newzone/root/etc/dladm-.
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/aggregation.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/linkprop.conf- failed
owner name -dladm- not found in passwd table(s)
ERROR: attribute verification of -/export/zones/newzone/root/etc/dladm/secobj.conf- failed
owner name -dladm- not found in passwd table(s)
Installation of -SUNWcnetr- on zone -newzone- partially failed.
-newzone- was configured to be a whole root zone. Are there any ways to solve these installation errors?
Thanks in advance.

This problem seems some strange - this time with Solaris 10u4, from 10 containers installed on a brand new X2200 (2x cpu) only one do not output those errors, but just this one cannot install the dsee or proxy. This time the errors were from:
Installation of <SUNWxwplr> on zone <dsee-proxy> partially failed.
Installation of <SUNWdtdmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWmconr> on zone <dsee-proxy> partially failed.
Installation of <SUNWrmwbr> on zone <dsee-proxy> partially failed.
Installation of <SUNWlvmr> on zone <dsee-proxy> partially failed.
Installation of <SUNWzebrar> on zone <dsee-proxy> partially failed.
So the machine was, too, just installed. After several hours, anoter atempt to install a zone, this time just this one, returned no errors - and the dsee installed without any complains. All configurations were for whole root zones. Used was Solaris 10u4 with the most recent patch cluster applied.

General install error - version 11 on Mac Mountain Lion

OS is up to date. Updating flash on firefox. Firefox is latest version (22.0). Firefox is not running. Older flash version is uninstalled successfully.
"General installation error".
Any solution?

I'm a Linux user so Single User Mode and Terminal are second nature to me. But I spent too many years telling Windows users NOT to boot into safe mode to install stuff because if if you have to leave the GUI for anything beyond Kernel level mods... "something ain't right".
I'm totally cool with your solution, and certainly glad that you were able to do it. Unfortunately, these days there are a lot of "Windows converts" who can't do that sort of stuff, like you or I could, so I don't instruct them to try something that if they screw it up, I get my butt chewed for it. I did that with a registry "tweak" in 2005, and nearly got banned. I'm not an Adobe employee, so I don't need to be bawled out by those here who are. I err on the side of caution.
Again, I'm glad you got it worked out... oh, and I don't get to "enjoy my broken Flash install" because mine works. Watching classic movies on YouTube as I type this...

Adobe Reader install error codes 1303 and 150210

I cannot install Adobe Reader XI 11.0.09 I get Error 1303, which is insufficient privileges to access directory c:\Program Files(86) (I have disabled my antivirus program), and setup error code 150210 which says Setup interrupted before Adobe Reader could be completely installed.I don't know what else to do. I need to have Adobe Reader on my laptop.

You can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Test fails after php install: "Error executing file" and "no protocol"

With version 10.1.3.3.0, after installing the php extension, a simple test file fails with the log message of:
>>
Error executing file:/pgmdev/phpApp1/phpProj1/public_html/test1.php
Reason: no protocol: /pgmdev/test1.php
<<
Contents of test1.php:
<html>
<head>
<title>PHP Test: test1.php</title>
</head>
<body>
<?php phpinfo(); ?>
</body>
</html>
Any suggestions?

Additional info:
This is on a Fedora 8 box that is running Oracle XE and ZendCore php just fine. Running the test.php page from /var/www/html produces the expected results, so apache is running as it should. The ZendCore control panel functions as well.

Trying to install final cut studio and not recognizing serial number

I am upgrading from final cut pro 5.1.4 with final cut studio 2. When I enter the studio 2
serial number it asks me for my original serial number from 5.1.4 and it tells me it's not
a valid serial number. I have checked over and over with my manual and the serial number
on the software in the computer and it still says the same thing.
Please help me thank you.

Well we are not together anymore but he was my boyfriend at that time. He was trying to do something really nice without realizing many things about purchasing something like this.
Actually, I have 2 serial numbers one for DVD Studio Pro 3 academic and one for final cut pro HD Academic Su. Is that what I am looking for ?

How to install Final Cut Studio on Mac OS X

I have a Mac Pro with Mac OS X Lion. I want to reinstall Final Cut Studio comes with my mac. What to do?

Insert the DVD.
Click on the installer package.
Follow the on screem instructions.

Confliction errors with iPhone and Mac Mail

I am having constant issues with the iPhone causing my Mac Mail to dislay "The POP server *** rejected the password for user *******" dialog box when the iPhone and/or any of my computers try to pick up mail at the same time on the same accounts. The password and user name are correct. Has anyone found a setting to enable multiple computers and iPhone to collect mail from the same accounts without issue? Does this same issue happen with Entourage?

A POP account is not designed to be accessed by multiple email clients at the same time and the email client used makes no difference in this regard at the incoming mail server for the account.
This is usually not a problem with an IMAP account. I don't have this problem with my .Mac account - the Mail.app on my PB runs 24/7 checking my email accounts for new messages every 15 minutes. Since using the iPhone to access my .Mac account and a business POP account, the POP account on my PB is taken offline but not my .Mac account. I've accessed my .Mac account with both at the same time with no problems.
If you are unable to switch to an IMAP account, you will need to turn off having the POP account checked for new messages automatically by the Mail.app.

Install error on studio 8 and Mac OS X

Similar Messages

Maybe you are looking for