Install error on XP laptop installing C410 software

Bought a new HP C410 for home. Have 4 laptops (3 Win 7 and one XPPro) and 2 Desktops, both XP Home. Almost new D-Link DIR-628 router running WPA shared. Every install of HP software and connection to printer through wireless went flawlessly, except for the XP laptop. First had to correct permissions in a registry key, then the install started hanging . Install gets to the point of asking what method I would like to connect to the printer and I select "Wireless" as I did all the other installs, then I get a window that says I cannot connect to the printer. The HP NDU detects the both the printer and the router just fine but can't connect. I can ping the IP address of the printer fine also. If I try to manually enter the IP address of the printer the install just keeps looping around to the manual IP entry window. Running AVG antivirus 2011, with firewall; but disabling the firewall makes no difference. Wireless connectivity between laptop and router is excellent.
I'll admit to a certain lack of knowledge about wireless protocols, but have a feeling that this issue has something to either the type of wireless adaptor in the laptop or a setting on the router, which works fine with the newer Win7 laptops.
I found an answer to the Registry permission issue on this forum and hope somebody can direct me to the cause and correction. This isn't a mission critical laptop, but it's one that gets used a lot and would be nice to print from.

OK, that all sounds good, leave it the way it is.
Here are a couple of more ideas:
1. Update the firmware for your router.
2. This is a bit risky, you may want to disconnect your router from the Internet first. Disable or uninstall AVG and try again.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

Can't install any software on my T61p laptop?

I have an issue with installing any software programs to my Lenovo Laptop. I have checked the CD ROM - diagnostics etc. The tests passed with flying colors. The music CD works great. I am using Windows XP.
I am sure that there is nothing wrong with a CD ROM because when I restore the system from the backup I did back in 3/19/2008 - it records any software that I like to install. I am using all the original installation CD's.
I don't want to keep it in the that state from 3/19/2008 because I would loose all my files plus I had a wireless Netgear installed which it was painful to install in a first place. I like to keep the setting I currently have and files but I NEED THIS CD ROM TO WORK.
I have tried to recover software from the 3/19/2008 date but they don't work either. Besides what is the point of not having not operational CD/RAM. I read online that sometimes VIRUS can reset the settings for installing software, but how this is possible. Why the Windows XP allows to switch such important settings.
I also checked the properties of CD/ROM for enable, disable and they set as enable. What is stopping recording on this laptop in the state I am in now. I have a virus software - no viruses either.
I have been dealing with this for 3 weeks now and I am out of ideas. I have called Lenovo and they said that they only deal with hardware issues. I have this computer less then 7 months and I have 2 year assistance from Lenovo.
I would appreciate if maybe some Lenovo Technical Rep would read this note so he/she can offer some ideas to deal with this issue. I do not want to restore this computer to factory settings or 3/19/2008 (then I am sure the CD/ROM would work)
Thanks for your help.
Kinga

Hi - thanks for trying to help me.
1. I have received the computer on 3/05/2008. I have installed Adobe Photoshop, Picture Studio, Outlook Express, MC Word, Power Point, Excel, Business Cards creator, Symantec Antivirus and bunch of other programs that I had original CD's. At the time I had DSL- Cable internet Connection. I also, did all the Windows Updates and Lenovo Updates. I had Windows XP installed already as operating system by Lenovo.
2. On 3/19/2008 I did a backups so the info with all the programs working properly were stored in computer's memory on drive C.
3. On 10/10/2008 I have installed a Wireless Netgear with a help of Netgear support team. I have turned all the wireless radio's on, setup a network etc. I did not do any backup at the time.
4. On 11/10/2008 the Symantec Antivirus cought a virus - Trojan Horse and stored in a Quarantine. Later on that day I wanted to open Adobe Photoshop to cut some pictures and graphics and the program was "FREEZING". I have tried to open Business Card Creator program and it was FREEZING as well.
I did a full system virus scan to make sure there is no viruses left. It was showing that one stored in quarantine. I also did a spyware scan LavaSoft - Advare and Seach and Destroy spyware. Some was removed. The programs were still freezing. The internet worked OK plus Outlook Express. I tried to figured out what to do for a few days.
5. 11/14/08 - I have removed the Adobe Photoshop and Business Card Reader from Add/Remove programs feature. Then I have restarted a computer. I figured since I have original CD's so I will reinstall them. I have placed a CD in CD/ROM and I hear the reading but when I hit the install the CD was just spinning. It refuses to record anything. I click next/install so I can place registration numbers and I see no screen. Same with other CD. It freezes.
Well, then I tough that maybe the CD is damaged, so I have put it in another desktop computer that I have and it installs it super - no problems. Same as other program.
6. Then I tried to play a music on the Lenovo laptop- well, it works OK.
7. Then I decided to use ThinkVantage feature and see if any error that I might have on Windows or maybe CD drive will be shown on diagnostics. It took a while while a detail process was completed and no error's found. I also did a VIRUS Scan that is offered on ThinkVantage on Lenovo (no virus found). Then I did a system backup 11/14/2008 - figured just in case.
8. Well, then I thought I try again with any other installation CD - just any that might work and install something for a try on a laptop and nothing. It spins and no installation boxes, no features (most of the time it freezes the laptop).
9. Next, I tried to restore only a program from a previous backup from 3/19/2008. I have chosen Adobe Photoshop that worked great on 3/19/2008. Nothing - does not work at all.
10. Next on 12/05/2008 - I did a full system restore to 3/19/2008. I figured that I had nothing important on laptop that I need plus maybe I can reinstall a Wireless Netgear with a help of Netgear CD and instruction booklet. Plus it would give me a chance to test a CD/ROM if it works.
11. Surprise! After restoration of the Windows XP to a state from 3/19/2008 I have noticed that Adobe Photoshop is on it and it works great. Does not freezes and works great. Then I have installed a few new programs that I never needed in a first place on that laptop but I figured I need to test them if they install anyway. They install with a ease. Next, I have deleted Adobe Photoshop from Add/Remove feature of Windows XP and restarted a computer. Well, Surprise again! The CD installs Adobe Photoshop with an ease - no problems. Boxes for registration copy come on. Completes the process - fully installed. I have shut down and restarted a computer to be sure that it works - open's up, loads and I can use it on any picture.
12. 12/05/2008 - I tried to reinstall my wireless internet connection. (I could connect to DSL internet with a cable). I placed a CD follow the prompts. I kept the same names on the network I had before since I figured it is less confusion. Well, it was a pain. It was late then anyway plus I know that Netgear gives you 3 months of any support for free once you buy a product and after that you have to pay per accident.
13. 12/07/2008 - I was so tired with trying to work that Netgear so I have restored the system to 11/14/2008 state from my C: backup. I was curious that maybe I can look at some network features and see what I have been doing wrong.
14. 12/07/2008 - I came back to the same state. Internet works, Outlook Express works but Adobe Photoshop is gone since I deleted it on 11/14/2008. I think if it was on it it would freezes anyway. Again, I try to install a CD - any CD and nothing.
Sorry that this is a bit confusing but I tough that at least I can show a process what I exactly did. My question is - is there any feature on Windows XP that prevents from installing a software? Did maybe the virus caused to block it?
I have also tried to look under Drive DVD/CD-RW /Properties to see if I have enabled or disabled any recording features. It says the device is working properly.
I have checked a C: Drive properties to see if anything is checked disabled - nothing that I could not find .
Honestly, this is a first time that I could not figured out what is wrong. I am not so technical in terms of networks but I use computers a lot and I can set basic features and use many graphic programs.
If anyone can offer me some suggestions I really appreciate. If I can fix that I would have to restore to 3/19/2008 because the CD/ROM was installing then and maybe call Wireless Netgear people so they can walk me through again and pay them the fee.
Thanks.
Kinga

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

II have downloaded several Apps that state they work with iTouch but they will not install and give error message that I need updated software, while all my updates available are installed on both iTouch and my computer iTunesWhy will Mindtools app not

My iPod Touch will not function with certain updated apps ie MindTools, YP.com, Mint, Ymessenger etc and I get the error message that I need to install updated software to load these apps to my iPod Touch; however, I have double checked and all the software updates have been loaded in obht the iPod touch and my computer. There are no updates availabe; yet the error message on App is a software update is required for App. "was not installed because it requires a newer version of iPod software."
The iPod Touch is using 3.1.3 software and it tells me that is the current and updated software version.

You are correct in that your 1G iPod Touch has all the latest software updates. It can only be updated to version 3.1.
However that Apps you are trying to download and install likely require iOS version 4.0 or later, which is not compatible with your iPod Touch. So either you'll need to buy a newer iPod Touch or find other Apps that are suitable replacements if possible.
Sorry.
B-rock

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

When trying to download Boot Camp Windows Support Software, error says: "Can't install the software because it is not currently available from the Software Update server."

I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
Please help!
Thanks

You need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.

Boot camp error: Can't install the software because it is not currently available from the Software Update server.

hi there i was trying to install windows via bootcamp and when i was trying to download the support software i had an error of "Can't install the software because it is not currently available from the Software Update server." i am using a 15" 2009 macbook pro and the bootcamp version is 5.1.0 (473). can anyone help? thanks in advanced

Instead of downloading the Windows support software from Boot Camp Assistant, download it from the Apple website. Mid 2009 and older MacBooks Pro only support this Windows support software version > http://support.apple.com/kb/DL1630 This version allows you to install a 32-bit or 64-bit Windows 7 version.
Follow Apple's steps to install Windows on your computer > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

There were errors installing the software

Mac Mini G4 1.25GHz / 512MB / 40GB / Combo / Modem.
Ser: YM6***TAB
<Edited by Moderator: Personal Info - Please See Terms of Use>
Originally Mum's Mini was "doing strange things", so I had to drive 150 miles to try to sort it out.
First I downloaded AppleJack and tried it out on my own G4 Tower before heading north to visit Mum. Applejack installed OK from my USB memory stick.
Unfortunately, it didn't occur to me to take a spare keyboard and I was unable to get her Mac Mini (with a miniature keyboard) to respond to any key presses at start-up, which foiled all attempts to use AppleJack or even single user mode!
However, I was able to use DiskWarrior and it found several corrupted files on the Hard Drive, which it claimed (after two attempts) were repaired. I then "repaired permissions" and ejected the DiskWarrior disc. Then I had the bright idea of going to "Software Update" in the Apple Menu. This downloaded the latest OS10.4.11 and started to install it. After 20 minutes it reported that there was a "problem with installation" and I should reboot and try again, which I did, with the same result. So then I had the amazingly bright idea of erasing the drive and installing 10.4 from the original DVD. This got several minutes into the procedure before reporting a problem. "There were problems installing the software".
I gave up at that point, left Mum my iBook to use and brought the Mac Mini home.
I was able to boot it up from an external Firewire HD, which contained a clone of the boot drive from my own G4 Mac Mini. It seemed to work OK so I tried the Tiger installation DVD again. It failed as before but I was able to save the Crash Log onto the Firewire Drive and you can view it here:
http://www.amstard.co.uk/temp/OSInstallCrashLog.txt
(I hope this means something to somebody! The way I interpret it is that it installed a file then discovered that file was corrupted?)
I used Prosoft "Drive Genius" to erase the internal Hard Drive again and it reported that all was well. But I still couldn't install the OS.
After that, I couldn't even get the Mac Mini to boot from the external Firewire drive. It just produces a black oblong on a gray screen with a stalled "cog wheel". Here's a photo that I took:
http://www.amstard.co.uk/temp/screenphoto.jpg
There is nothing connected except the standard USB keyboard and mouse at this point and the external Firewire drive.
It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
I have "zapped the PRAM" without making any difference to this symptom.
I have tried doing the simplest installation without any additional fonts, language translators or bundled software.
Any suggestions - apart from "scrap it!"?
Martin (UK)

It does boot up with the generic Tiger installation DVD. I can run Disk Utility, which reports no errors on the Hard Drive. But it fails when I try to install the OS 10.4 with an error message "There were problems installing the software" (generic OS10.4 installer) or "There were errors installing the software" (original Mac Mini OS10.4 installer).
I have fitted a new 120GB drive and replaced the RAM. The OS still fails to install on the newly formatted drive. The Apple site suggests a firmware update for this error message but doesn't list one for the Mini.
I have tried installing OS10.4 from the original Mac Mini installations discs and from a generic 10.4 installer. Both give the same "There were errors installing the software" message.
Since this is an original G4 mini, there is no reason at all that any full retail 10.4 installer, or the original MacOS installer that came with the mini would not work. Later minis, released after Tiger's release date were in some instances unable to boot from the early versions of the Tiger retail installer because 10.4.0 or 10.4.1 pre-dated the versions those minis came supplied with, but clearly that isn't the case with your system.
If you are certain that the MacOS install disk you have is the one that original one that came with the mini (which should be a late version of MacOS 10.3.x), then the only obvious thing to check is that you have correctly partitioned the drive (it should be partitioned in the Apple Partition Map scheme, and then formatted as MacOS Extended (Journalled). If those parameters are met and you continue to get the error from a valid installer for that system, then the potential causes narrow to such things as defective install disks (unlikely since you have tried more than one), defective optical drive unlikely because you can boot from the install disk using the drive), or defective logic board/disk controller - which is a distinct possibility since it's possible that was responsible for the first drive failure (or the indications of failure).
Boot the system using the original MacOS installer and using Disk Utility, set the new internal drive up again with the APM partitioning and MacOS Extended (Journalled) formatting, then immediately run the 'Repair Disk' tool on it to make sure the drive is being read and written correctly. Then performa PMU reset (instructions below) to ensure that the failure to boot from the external FW drive is not a simple matter of dropped FW port. On rebooting with your FW drive connected, hold the Option key down to see if the system then recognizes your external drive. If it does, select it and attempt to boot from it.
With luck that will give you a working system, booted from your external, at which point I would then see if it's possible to clone your external to the new internal drive, rather than attempt a reinstall from the MacOS installer.
On the face of it there should be no reason that would not work since by booting from the MacOS installer you basically show that the system is sound and the optical drive is working. By partitioning and formatting the internal drive and getting a clean bill of health from the repair disk tool, you show the drive and disk controller are OK. That doesn't leave much else to be at fault!

Error in installing Oracle Software while adding node in RAC

Hi All
Oracle Version: 11.1.0.6.0
Linux
In the RAC environment, I am in the process of adding a node to the existing rac environment.
I have succssfully installed cluster software in the new node. all gsd, ons and vip services are running perfectly for new node in the existing and new nodes.
Next step, I started installing oracle software by executing the script $ORACLE_HOME/oui/bin/addNode.sh.
Here after specifying the the new node information (public host, private host and vip details) and when I pressed next,
OUI is giving following error - "Error occured while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured".
I ran olsnodes -n, it is giving proper node number.
Can somebody help me in identifying the problem and solution.
Thanks

I am hitting the same issue, my problem was when I added the new node initially it fails because of the hint8-priv1. I followed the link below to remove and cleanup the last install. olsnode show only my existing nodes NOT including the new node.
http://download-west.oracle.com/docs/cd/B12037_01/rac.101/b10765/adddel.htm
then I ran
./addNode.sh -silent CLUSTER_NEW_NODES={hint-8} CLUSTER_NEW_PRIVATE_NODE_NAMES={hint8-priv1} CLUSTER_NEW_VIRTUAL_HOSTNAMES={hint8-vip}
I am getting this when use command line:
Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
SEVERE:Error ocurred while retrieving node numbers of the existing nodes. Please check if clusterware home is properly configured.
also run addNode.sh via GUI, the new node name still listed and can't continue.
BTW, adding new node should support online, shutdown is not required

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
thanks

for windows you should have an exe and a 7z file. put both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

There were errors installing the software Os x disk 2

Hey guys.
I run an older version of os x (10.4.8) on a Macbook as I have an old version of pro tools that I won't run on anything newer. I havn't gotten round to updating pro tools.
Yesterday, I tried to install the update for 10.4.11 since I'm not too bothered about pro tools anymore.
It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
After this, everything froze and I was forced to manually restart the macbook using the power button.
When restarting, I got a kernel panic error which asked me to repeatedly start the system.
Fed up with this, I decided to revert back to 10.4.8 by booting from the dvd, erasing the macbook harddrive and installing from scratch.
Disk one went fine, but disk 2 hangs up when installing garage band instruments, then I get the message THERE WERE ERRORS INSTALLING THE SOFTWARE. PLEASE TRY AGAIN.
I've tried this three times with no joy.
Any ideas?
Thanks

Hi Ibin5, and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
It took around 2 hours, then at the end seemed to stop without any confirmation of it's success.
Hmmm, that's too long, might see this...
http://www.apple.com/support/macbook/hd/repairextension/
Also, That second Disk thing happens frequently, the best way around it is to do a Custom install, and eliminate enough Printer Drivers, Languages, Fonts, and Applications you don't need... then it may skip #2 altogether.
http://support.apple.com/kb/HT1442

I installed Canon software on my macpro laptop and it takes forever to startup and shut down

Hello. I recently got a Canon Rebel T3 and in order to download photos to my macbook pro I had to install their software. Well, after installing it, it takes VERY long to shut down and start up my laptop. Can someone help? I already deleted the software off the laptop, but that hasn't seem to fix the issue.

"... I already deleted the software off the laptop, but that hasn't seem to fix the issue."
I doubt that the software was the issue. So why not tell us what model MBP you have and how much free space is on the hard drive. When was the last time you booted to the OS installer disk and run Repair Disk from Disk Utility? BTW, you may not need their software to download pictures to your Mac. Launch iPhoto and from the menu: iPhoto>Preferences>General: Connecting Camera Opens.....

I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn't be completed. (com.apple.installer.pagecontroller error -1.)

I downloaded some software and it has to be downloaded from the internet. DL complete and when I click on the pkg to install the software I get the following msg: The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.)
Pls help.

I bought HGTV home design software. It doesnt come w/ a installer disc, it gives you a link to dl the program. I did that and was left w/ a .mpkg file that I am unable to install do to the above msg.

Install error on XP laptop installing C410 software

Similar Messages

Maybe you are looking for