Install Error (Operating System User Error)

Hello,
I am having a problem installing Oracle 9ias application server. I installed it once and then thought I messed the install up because I couldn't log on to the application manager. Anyway I deinstalled it using the product installer software they supply and then I rebooted and now I continue to get the following error. I am the only user who has ever tried to install the software.
All Oracle 9iAS installations on a host must be installed by the same operating system user. The initial Oracle 9iAS installation located at C:\ora9ias was installed by a different operating system user. Please exit the install, log in as the user who installed the inital Oracle 9iAS installation and restart the install.
Any ideas?

Hi,
you must drop manually the references in regedit to old iAs orcle home. Then you must drop the key 'em_loc' in regedit located in HKEY_LOCAL_MACHINE>Software>ORACLE if this key is pointing to Oracle 9iAS home.
I have done this and I've installed my ias instance right in W2K.

Similar Messages

"boot device not found. please install an operating system on your hard disk error on Dm3 1030us

Hi
I have the following computer:
name: hp pavilion Dm3 1030us
serial number: {Removed for privacy}
product number: VM073UA#ABA
when i boot up my laptop it says "boot device not found. please install an operating system on your hard disk."
this laptop does not have a cd drive but I do have a external one. since it does not have a cd drive therefore they didnt give me a recovery cd.
It had Windows 7 on it.
Is there a way to get the issue resolved

You would have to call in to HP tech support ( 1-800-HP-INVENT) and have them order you some RCD's.
I work for HP.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Oracle installed under which operating system user?

How can I know, under whıch operating system user does the oracle installed?
Oracle 10gXE and windowsxp

You can find it ..following the next steps:
1) Control Panel
2) Administrative Tools
3) Computer management
4) Click on 'groups' sub-folder of the 'Local users and groups' folder
5) on the right pane .. search for the 'ora_dba' group... This group is automatically created by Oracle and puts in the O/S user you have logged on the system at the time of the db installation....
6) Dbl-click on this group to find out the O/S username....
I'm not sure for the above steps if you have installed OracleXE...
Greetings...
Sim

I bought a second hand Macbook Pro and colorful stud Only after a few months I decided to reformat it Bad movie started here I did not get it with a disc and I come to install the operating system And he asks the name of Apple's user ID financed had been

I bought a second hand Macbook Pro and colorful stud
Only after a few months I decided to reformat it
Bad movie started here I did not get it with a disc and I come to install the operating system
And he asks the name of Apple's user ID financed had been bought Lion OS Now
And who sold me does not answer then I found the phone number of his mother
She said he lived in USA and paid him more than the lion version of the MacBook and now I can not install Lion
And I'm not from USA

Unless you go back to the original owner, yes you need to pay for it again.
You're entitled to the OS that shipped with the device from Apple, but if you don't have that media there's nothing you can really do. If the system originally shipped with 10.7 or 10.8 then when you boot it to Internet Recovery, it will automatically offer you that OS version (as the serial # is registered with Apple). If it shipped with an older OS, then you need to enter the Apple ID that purchased 10.7 or 10.8. You didn't purchase it so that's not you.
The options you have are to buy Lion for $29 US (I don't know the price in Palestine), or Mountain Lion for $19 US (don't know the price in Palestine either), and install from scratch.
And it's a good idea to know you have restore media before you reformat your machine.

VMWARE Server2012RT Installation failed with option: I will install the Operating System later

Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

Ok. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx

How do I re-install the operating system on my BlackBerry Torch 9800 - I am sure it is hacked.

Greetings,
Can someone point me to instructions on how to re-install the operating system on a BlackBerry Torch 9800 and then upgrade it to the latest release?
I have done this several times in the past, due to recurring hacking, but have lost the instructions.
Thank you very much for your help.
Regards,
Jean-Pierre
P.S. I would preffer a releas of the OS without any pre-install applicaitons such as Twitter, Facebook, LinkedIn,
and above all, Whastapp. Thank you.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Boot device not found - Please install an operating system on your hard disk

Trying to boot up this morning gave this error message:
"Boot device not found
Please install an operating system on your hard disk
Hard Disk <3F0>
F2 System Diagnostics"
Pressing F2 brings up to the "HP PC Hardware Diagnostics UEFI" page, where its shown:
"Version 1.6.0.0 - BIOS
Fore more info please visit www. ... ...
Memory Test
Hard Drive Check
Language
Exit"
Tryied the HD check but it says:
"SMART Check : Not installed
Short DST : Not installed
More details:
No bios upgrade was made, never, only a big updating of Windows yesterday.
Could someone kindely help me out please?
Thanks, Perry G.

Hi,
The above error message shows that the Hard disk drive is failed on your unit. You have to replace the Hard disk drive and reinstall the OS.
To order parts click the below link
https://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=FA59F7C7DCAC4237B498C91D0507A761
To order Recovery disk click below link
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&dlc=en&lc=en
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system

My Duaghter is out of the country studing abroad. Her PC would no longer boot up so she took it to a support shop. They replaced her hard drive, fixed an over heating issue and reloaded her PC. Now she is getting this new error message and she is desparate to get this fixed. We have owned this PC for only 2 years. I am sure it is out of support.
HP Pavilion dv-4087CL Notebook receiving : Boot Device Not Found-Please install an operating system on your hard disk.
She took it back to the support shop and they upgraded her bios, but that did not fix the error message.
Please help! What can she do now.

Hi:
Normally that means the hard drive failed.
I know it was replaced but maybe the replacement drive went out too.
There is a hard drive diagostics tool your daughter can run in the BIOS.
I suggest she run it (enter the BIOS by tapping the F10 key as soon as she sees the HP welcome screen).
Then once in the BIOS, there should be a diagnostics menu..one for memory and one for the hard drive.
She should select the hard drive diagnostics application and see what it reports.
Then go from there based on what is reported.
Paul

My screen says boot device not found. Please install an operating system on hard drive,

My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
3. Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

BOOT DEVICE NOT FOUND - PLEASE INSTALL AN OPERATING SYSTEM ON YOUR HARD DRIVE

HP G6-2212SA LAPTOP ( 2 YEARS OLD) BLACK - WINDOWS 8
I HAVE RUN THE MEMORY TEST PASSED
RUN THE HARD DISK QUICK CHECK - PASSED
RUN HARD DISK EXTENSIVE TEST - PASSED
I HAVE BOUGHT A NEW HARD DRIVE, INSTALLED IT AND RUN ALL THE SAME TESTS WITH ALL THE SAME PASSED RESULTS. I BELIEVE THAT THE PROBLEM IS NOT THE HARD DRIVE, SO I HAVE TAKEN THE NEW ONE OUT AND PUT THE OLD ONE BACK IN, AND HOPEFULLY BE ABLE TO GET A REFUND IF I SEND IT BACK.
I HAVE FOLL0WED INSTRUCTIONS ON THIS FORUM TRIED MOST THINGS STILL GET THE SAME MESSAGE.
I HAVE BOUGHT A WINDOWS 8 RECOVERY DISK OFF EBAY, TRIED IT SEVERAL TIMES AND DIFFERENT WAYS BUT WILL NOT LOAD UP
PLEASE HELP AND ADVISE AS IM IN A DELEMA
DARREN

Hi @Darren104
Welcome to the HP Support Community. I saw your post regarding the Boot Device not Found error message. This HP document Resolve Boot Device not Found Error Message will show you how to reset your BIOS. This will force the BIOS the look at the hardware and it might see your new hard drive. Another reason that it might not be seeing the hard drive is because there is no bootable operating system on the hard drive. You might need to look at taking it out and installing an operating system on it via another computer.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

Hey
i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
Error Message only shows up when I disable the Leglacy mode.
So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
Laptop Model : HP Envy Dv6-7211tx
Hard Drive : 1Tb and 32GB SSD

Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx. I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document. http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463
If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Re-installing Adobe Lightroom with cd software after re-installing the operating system?

i wiped my computer clean and re-installed the operating system on my macbook pro because it's old and i hadn't done it in a long time. now i'm putting all of my old software back onto the computer. everything else had no problem. adobe lightroom 2 will not let me re-install it and keeps giving me an error message, telling me to contact the software manufacturer. the cd is not damaged at all and i have the serial number for the software, etc... what's wrong? why can't i put it back on my computer? i've done this at least twice before and had no problems.

What version of Mac you are installing and what is the exact error message ?

File Permissions on Oracle Directories for other Operating System Users

Hi,
I am trying to export the table data to flat file using a pl/sql function using UTL_FILE package and directories created using 'CREATE DIRECTORY' command. The function is called from a stored procedure which in-turn is called from a Java program using JDBC and the Java process runs as different operating system user. The problem for me is the file exported is being written as 'ORACLE' user with 'OINSTALL' group and '-rw-r--r--' linux file permissions. When I try to read this exported file from the java program it throws me a file access error.
I would like to know if we can specify any additional parameters either in
1) Database parameter file
2) UTIL_FILE.FOPEN function
3) CREATE DIRECTORY command
so that the files written to the DIRECTORY have a read write access.

Since you attempting to read the file from Java, you are constrained by the OS.
Write a stored proc to read the file, since PL/SQL does have the correct permissions to read/write to files.
P;

I turn my computer on it says please install an operating system on your hard disk.

i turn my computer on it says please install an operating system on your hard disk. I've had my computer for 2 years and I never done anything different then I always have. Is there an easy way to fix it. Please help!!!!

Hi,
Shut down the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Can you also post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

After restore from 3 different media, all I get is "please install an operating system."

The hard drive quit in my stepson's notebook. I bought a new one, installed it. I've tried to re-install Windows 8 from the USB stick he created when he got it. Didn't work. I tried from another USB stick restore image from an identical model, didn't work. I PAID for the DVD recovery set from HP... didn't work. I tried a Win 10 DVD... didn't work. All have the same problem, When the install is "finished", every time I get an error message saying "Please install an operating system" on what should be the first boot up. After hours and hours of this crap I'm just about ready to throw the **bleep** thing away. There is no reason for this to happen, none. The only thing different is the size of the hard drive, it's 500GB instead of the original 350. Extremely frustrated and hoping for some insight, Ken

Welcome Blue.
You can clone the drive and change the product key.
You must make sure that they both have the same version of Windows COA's.
After you have the cloned drive booted go to START then COMPUTER then SYSTEM PROPERTIES.
At the bottom of SYSTEM PROPERTIES you will see CHANGE PRODUCT KEY.
Click on it and put the product key in that is on the bottom of that laptop.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Install Error (Operating System User Error)

Similar Messages

Maybe you are looking for