Install error SCSM 2012 SP1 _PopulateUserRoles

I currently have SCSM 2012 in production and working however when adding a secondary Management Server the installation fails at the Install Services, returning a
An error occurred while executing a custom action:_PopulateUserRoles. I am using the same system account that works on the primary Management server, verified that its a local admin on the new server, and the firewalls are opened on each
server. The account I am installing the software from is a domain admin and a local admin on the server. I have even elevated the privileges when launching the executable to no avail.
any help would greatly be appreciated!

Perhaps this Cireson blog could help you?
http://cireson.com/blog/scsm-an-error-occurred/

Similar Messages

Trying to Perform an install of SCSM 2012 SP1 - SQL Analysis Services Not Installed

I'm performing a clean install of System Center Service Manager 2012 on a Windows 2012 server. The prerequisite checker told me the Analysis Objects were not installed. I clicked the link and downloaded the SQL Server 2008 R2 Analysis
Management Objects. I restarted the install and it still says it's not installed. I also tried installing the 2012 version of the objects and still no luck.
I also tried installing both the x86 and x64 versions of these tools.
I have also tried the same install on a Windows 2008 R2 server and had the same error. I'm convinced this is a bug in the setup.
Has anyone else seen this? Is it a known issue?

Try to check the log file SCSMSetupWizardxy.log under C:\Users\<username>\AppData\Local\Temp
perhaps it could not load Microsoft.AnalysisServices.dll assembly.
12:23:55:**************************************************
12:23:55:CheckPrerequisites: Checking Microsoft SQL Server Analysis Management Objects prereq.
12:23:55:Entered RequiredAMO
12:24:08:Trying alternate method of detection using Assembly.Load
12:24:08:Error occured while loading Microsoft.AnalysisServices.dll: Could not load file or assembly 'Microsoft.AnalysisServices, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
12:24:08:CheckPrerequisites: Logic Type:and AMO-err: 2
12:24:08:
12:24:08:CheckPrerequisites: Microsoft SQL Server Analysis Management Objects: Failed
12:24:08:
12:24:08:**************************************************
can you confirm if that assembly exists in the Assembly folder.
on a side note: SCSM 2012 SP1 supports 2008 R2 SP1 or above, and double check that the account you are using to install the SM is a local admin.

Install of SCSM 2012 SP1 DataWarehouse Fails with PreRegisterExtensionsDeferred

Hi,
Trying to install System Center Service Manager 2012 SP1 DataWarehouse on Server 2012 and it's failing on Configuring Reporting with "An error occurred while executing a custom action:_PreRegisterExtensionsDeferred".
Looking in the logfile SCSMInstall01 we get these lines:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions
PreRegisterExtensions: Begin
PreRegisterExtensions: Starting in deferred mode
PreRegisterExtensions: 20 extension records decoded
PreRegisterExtensions: Connecting via InProc SDK
PreRegisterExtensions: Loading management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: Importing management pack C:\Program Files\Microsoft System Center 2012\Service Manager\System.Library.mp
PreRegisterExtensions: System.ArgumentException: The requested management pack is not valid. See inner exception for details.
PreRegisterExtensions: Parameter name: managementPack ---> : Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: Database error. MPInfra_p_ManagementPackInstall failed with exception:
PreRegisterExtensions: XML parsing: line 9590, character 93, end tag does not match start tag
PreRegisterExtensions:
PreRegisterExtensions:    --- End of inner exception stack trace ---
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.TryImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.EnterpriseManagement.ManagementPackManagement.ImportManagementPack(ManagementPack managementPack, IDictionary`2 resources)
PreRegisterExtensions:    at Microsoft.MOMv3.Setup.PreExtensionRegistration.PreRegisterExtensions(Session session)
PreRegisterExtensions: End (fail)
Databases being installed on SQL 2012 (11.0.3128).
Any pointers to where I'm going wrong?
Thanks,
Niall.

Did some searching about this error. Some people say it's because SQL permission issue. Does the service account you are using have permission to the SCSM database-server and on the database-server where you are placeing the data warehouse (unless you are
placeing it on the same server)
Have a look at this post: https://social.technet.microsoft.com/Forums/systemcenter/en-US/63518cc4-089e-4d70-8bb1-a6e305c3db84/an-error-occurred-while-executing-a-custom-actionpreregisterextensionsdeferred?forum=systemcenterservicemanager
www.zgc.se - Sysadmin blog.

Error while creating SCSM 2012 sp1 self-portal on SP2013

Hell to everyone
today dive into SCSM installation and self-service portal setup. the environment i use is as following:
Windows 2008 R2 Datacenter x64 SP1
SQL 2012 BI Edition
Sharepoint server 2013 Enterprise Edition
SCSM 2012 SP1
i have successfuly set up SCSM 2012. everything is workig fine.
but when i go to sel-service portal setup (all components on one server - both Web-Content server and SP WebParts) i face with an error
_CreateSharePointWebSite.F175D191_81C3_4A7D_A05B_6A250575B468
the error is related to Site creation and SP webparts installation.
i tried to setup just Web-Content Server and installation was finished successfully.
Please help me with the issue! very urgently
there is no honda without racing

Hi Pavel,
According to your description, my understanding is that you got an error when you set up Service Manager 2012 SP1 running on SharePoint 2013.
Please check whether you have configured SCSM and SharePoint 2013 correctly. You can check as the following link:
http://blogs.technet.com/b/thomase/archive/2013/08/19/how-to-get-service-manager-2012-self-service-portal-running-on-sharepoint-2013.aspx
Please make sure you used the same account to instal SharePoint and Service manager.
If this issue still exists, please do as the followings:
Open Central Administration\Monitoring\Review job defintions, select the servers in the farm one-by-one , then click Application Server Administration Service Timer Job, click Disable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm.
Try to install the SCSM portal.
Click Central Administration\Monitoring\Review job defintions\Application Server Administration Service Timer Job, click Enable.
Restart "Sharepoint 2010 Timer " in services.msc on all servers in the farm
Here are some similar links for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/47d43d25-6e14-464a-b899-c13dcbad880f/error-while-installing-service-manager-selfservice-portal?forum=sharepointcustomizationprevious
http://scug.be/valerie/2011/12/01/scsm-2012-self-service-portal-setup-can-t-create-a-new-site/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Reporting Tab is not showing in SCSM 2012 SP1 Console

I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
And only the below reporting management pack are available in the Data Ware House >> Management pack area.
I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

At last I solve the problem. THere is 2 solution for resolve the issue.
Force start all warehouse job.
Un register and reregistared DataWareHouse againg.
In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Install SQL Server 2012 SP1 on a Windows Server 2012 R2 Failover Cluster - hangs at "Running discovery on remote machine" on VMWare VSphere 5.5 Update 1

Hi,I'm trying to install SQL Server 2012 SP1 on the first node of a Windows Server 2012 R2 failover cluster.The install hangs whilst displaying the "Please wait while Microsoft SQL Server 2012 Servce
Pack 1 Setup processes the current operation." message.The detail.txt log file shows as follows:(01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached PID (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider
: NormalizePid is normalizing input pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : NormalizePid found a pid containing dashes, assuming pid is normalized, output pid (01) 2014-07-17 15:36:35 Slp: -- PidInfoProvider : Use cached
PID (01) 2014-07-17 15:36:35 Slp: Completed Action: FinalCalculateSettings, returned True (01) 2014-07-17 15:36:35 Slp: Completed Action: ExecuteBootstrapAfterExtensionsLoaded, returned True (01) 2014-07-17 15:36:35 Slp: ---------------------------------------------------------------------- (01) 2014-07-17 15:36:35 Slp: Running Action: RunRemoteDiscoveryAction (01) 2014-07-17 15:36:36 Slp: Running discovery on local machine (01) 2014-07-17 15:36:36 Slp: Discovery on local machine is complete (01) 2014-07-17
15:36:36 Slp: Running discovery on remote machine: XXX-XXX-01After about 4 hours and 10 minutes, the step seems to time out and move on, however it doesn't seem to have discovered what it needs to and the setup subsuently fails

Hi,
Sorry Information you provided did not helped can you post content of both summary file and details,txt file on shared location for analysis.
Can you download Service pack again and try once more
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

How to generate Incident Report with incident description field? in SCSM 2012 sp1

Can incident description field be displayed in reports? in SCSM 2012 SP1
Regards
Shujjat
Metalsoft

ALTER PROCEDURE [dbo].[ServiceManager_Report_Incidents]
@Classification nvarchar(max) = '-1',@SupportGroup nvarchar(max) = '-1',@ID nvarchar(max) = null,@IncludeDeleted bit = 0,@LanguageCode nvarchar(max)= 'ENU'
AS
DECLARE @tableClassification TABLE (value nvarchar(256))
INSERT @tableClassification (value)
SELECT * FROM dbo.fn_CSVToTableInt(@Classification)
DECLARE @tableSupportGroup TABLE (value nvarchar(256))
INSERT @tableSupportGroup (value)
SELECT * FROM dbo.fn_CSVToTableInt(@SupportGroup)
DECLARE @tableID TABLE(value nvarchar(256))
INSERT @tableID (value)
Select * FROM dbo.fn_CSVToTableString(ISNULL(@ID, ''))
SELECT DISTINCT
I.Id,
I.Title,
Classification = ISNULL(ClassDS.DisplayName,ClassEnum.IncidentClassificationValue),
ClassEnum.IncidentClassificationId AS ClassificationId,
ClassEnum.ParentId,
Support = ISNULL(SupportDS.DisplayName,SupportEnum.IncidentTierQueuesValue),
SupportEnum.IncidentTierQueuesId AS SupportId,
Status = ISNULL(StatusDS.DisplayName, StatusEnum.IncidentStatusValue) ,
StatusEnum.IncidentStatusId AS StatusId,
AssignedTo.DisplayName AssignedToUserName,
AssignedTo.UserDimKey AssignedToUserId
FROM dbo.IncidentDimvw I
INNER JOIN dbo.WorkItemDimvw WI ON I.EntityDimKey = WI.EntityDimKey
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw ON dbo.WorkItemAboutConfigItemFactvw.WorkItemDimKey = WI.WorkItemDimKey   AND (@IncludeDeleted = 1 OR dbo.WorkItemAboutConfigItemFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.WorkItemAboutConfigItemFactvw CIFctForFilter ON CIFctForFilter.WorkItemDimKey = WI.WorkItemDimKey      AND (@IncludeDeleted = 1 OR CIFctForFilter.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.IncidentClassificationvw AS ClassEnum ON I.Classification_IncidentClassificationId = ClassEnum.IncidentClassificationId
LEFT OUTER JOIN dbo.DisplayStringDimvw ClassDS ON ClassEnum.EnumTypeId=ClassDS.BaseManagedEntityId
AND ClassDS.LanguageCode = @LanguageCode
LEFT OUTER JOIN dbo.IncidentTierQueuesvw AS SupportEnum ON I.TierQueue_IncidentTierQueuesId = SupportEnum.IncidentTierQueuesId
LEFT OUTER JOIN dbo.DisplayStringDimvw SupportDS ON SupportEnum.EnumTypeId=SupportDS.BaseManagedEntityId                    AND ClassDS.LanguageCode =
@LanguageCode
LEFT OUTER JOIN dbo.IncidentStatusvw AS StatusEnum ON StatusEnum.IncidentStatusId = I.Status_IncidentStatusId
LEFT OUTER JOIN dbo.DisplayStringDimvw StatusDS ON StatusEnum.EnumTypeId=StatusDS.BaseManagedEntityId                      AND StatusDS.LanguageCode
= @LanguageCode
LEFT OUTER JOIN  dbo.WorkItemAssignedToUserFactvw ON dbo.WorkItemAssignedToUserFactvw.WorkItemDimKey = WI.WorkItemDimKey     AND (@IncludeDeleted = 1 OR dbo.WorkItemAssignedToUserFactvw.DeletedDate IS NULL)
LEFT OUTER JOIN dbo.UserDimvw AS AssignedTo ON dbo.WorkItemAssignedToUserFactvw.WorkItemAssignedToUser_UserDimKey = AssignedTo.UserDimKey
WHERE
((-1 IN (Select value from @tableClassification)) OR (I.Classification_IncidentClassificationId IN (Select value from @tableClassification)))
AND
((-1 IN (Select value from @tableSupportGroup)) OR (I.TierQueue_IncidentTierQueuesId IN (Select value from @tableSupportGroup)))
AND
((@ID IS NULL) OR (I.Id IN (Select value from @tableID)))
-- exec ServiceManager_Report_Incidents @Classification=N'281,415,9,135',@SupportGroup=N'72,-1,69,43',@ID=N'IR55145'

Exporting Recipients details from all the Notification Subscriptions in SCSM 2012 Sp1

Hi Team,
Do we have any powershell script to export the recipients details from all the notification subscriptions from SCSM 2012 SP1. I have tried usind ChildEnumeration, but it didn't return any data. Sooner response would be highly appreciated.
Thanks,
Dinesh
Thanks & Regards, Dinesh

Subaru, your solution is not sending the email from different domains though. And it is initiated manually through the console.
We are looking for the ability to have subscriptions send emails from different domains or email addresses depending on queues or similar. In my research, I think the only viable option is to use orchestrator as mentioned above and have it monitor
tickets for criteria specified. Its a pain and a huge limitation in my opinion.
I think the bottom line is to not use subscriptions for a full loop email system. only use it for emails that will not be replied to.

IN SCSM 2012 SP1 email notification duplicating

We use SCSM 2012 SP1 in our environment. We create mail notification's for incident assignment. But a mail notification for an incident under same template going 2 times.
How can we configure it like for an incident same mail go for single time not twice.
Please help me ASAP.
Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

Dear Mithun,
if email notifications are duplicated, it means that 2 workflows that send emails are running on the same incident, kindly check your workflows and their criterias.
Best Regards
Jreij12

"back submit cancel " not show in ssp scsm 2012 sp1

hello
which may be the reason that my SSP in SCSM 2012 sp1 does
not show the buttons to submit my request to serve
rmanager?
<- Back Submit ->
 Cancel
 button
are not displayed ... can someone help me?
Thanks

Resolved : Stamped "create request button" in sharepoint web part
A glaring oversight on my part
Sorry.

Options for monitoring health of SCSM 2012 SP1 using SCOM 2012 SP1

Hi,
I've done some research on how to monitor SCSM using SCOM (version 2012 SP1 for both) and found two options:
Option 1 - Agent-based monitoring. With SCSM2012 SP1, it looks as though the agent is
already present (for upgrades and also for fresh installs). So it follows that SCOM will be able to monitor the health of SCSM.
Option 2 - Agentless monitoring. On the Technet
download page, 'System Requirements' section indicates compatibility with SCOM 2012 and above, and SCSM 2012 and above. Details tab says the following (emphasis mine):
This System Center Management Pack for System Center 2012 - Service Manager should be used to monitor
System Center 2012 - Service Manager, System Center 2012 R2 - Service Manager
and includes monitors for the management server as well as the Data Warehouse server. In this release of the management pack, the Data Access Service, Health Service, Configuration Service, and workflows are monitored.
So it looks like both options are viable, but I'd be interested in hearing other people's experiences of using one vs. the other. Is there any major difference in the information that's provided by agentless vs. agent-based monitoring, or are they just two
different ways of pulling the exact same information into SCOM?
Edit: Just occurred to me that SP1 isn't explicitly mentioned in the Technet article linked above under option 2. Has anyone successfully used agentless monitoring on SP1?

Hi,
Here is a related blog for your reference.
SCSM 2012 SP1 (Beta) – Monitoring Management Servers with SCOM 2012
http://marcelzehner.ch/2012/09/29/scsm-2012-sp1-beta-monitoring-management-servers-with-scom-2012/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 R2 Report Server component install to SQL 2012 Sp1 error?

Hi All
Im having issues installing SCOM 2012 R2 Report Server component to a SQL 2012 Sp1 Server (which is a Windows 2012 R2 Standard server). Im trying to install to the SQL Default server instance, note that the server also has a named instance
which hosts the SCOM databases. SQL Reporting Services is up and running fine (can access the web urls etc). Im also using the SCOM install account wich has full SQL and SCOM Server admin rights for the install. Ive checked that the Firewall
is off locally on the SQL Server, Ive also checked that the existing SCOM components are all in a Healthy state in the SCOM console.
The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
Ive attempted the install on a standalone SQL Server away from the SQL Server hosting the SCOM databases, but encounter the same error. The full SCOM MSI Installer log details are below, line that appears most relevant is below but unsure why
this would be the case (same account that I used for SQL install etc). Any help much appreciated! : )
Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:51:46]: Debug: :CheckPrerequisites: IsComputerNameValidTitle: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :**************************************************
[11:51:46]: Debug: :<![CDATA[CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites: Logic Type:and AvicodeAgentInstalled-x64: 0]]>
[11:51:46]: Debug: :
[11:51:46]: Debug: :CheckPrerequisites: AVIcodeAgentCheck: Passed
[11:51:46]: Debug: :
[11:51:46]: Debug: :**************************************************
[11:51:46]: Always: :CheckPrerequisites: Return Value 0
[11:51:46]: Always: :Entering Page: AdditionalPrerequisitesPage
[11:51:48]: Always: :Entering Page: ShortEulaPage
[11:51:48]: Always: :Displaying localized EULA for localization: en
[11:51:48]: Always: :Displaying Eula: C:\Users\opsmgr\AppData\Local\SCOM\Setup\en\eula_en_notice.rtf
[11:51:49]: Info: :Info:User has agreed to EULA.
[11:51:50]: Always: :Entering Page: SelectManagementServerForReporting
[11:52:08]: Info: :Info:Management Server matches the current version of setup.
[11:52:08]: Always: :Entering Page: SelectReportingInstance
[11:52:08]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
[11:52:08]: Info: :Attempting to get the SSRS version from:
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
[11:52:08]: Debug: :Path is
\\WDC-SYSSQL01\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
[11:52:08]: Always: :SRS instance on WDC-SYSSQL01. Version 11.0.3000.0.
[11:52:08]: Always: :No SRS instances on WDC-SYSSQL01.
[11:52:08]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:08]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:08]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:08]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
 at System.Version.Parse(String input)
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:11]: Info: :Attempting to check SRS version
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
[11:52:11]: Error: :StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result)
 at System.Version.Parse(String input)
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.CheckSRSVersion(String srsInstance, String requiredSRSVersion)
[11:52:28]: Info: :The user canceled setup
[11:52:28]: Always: :Begin: Property bag dump.
[11:52:28]: Always: :SetupStartTime = 26/03/2014 11:51:38
[11:52:28]: Always: :Collection ProtectedProperties (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = ActionAccountPassword
[11:52:28]: Always: : [1] = DASAccountPassword
[11:52:28]: Always: :DefaultLogName = C:\Users\opsmgr\AppData\Local\SCOM\Logs\OpsMgrSetupWizard.log
[11:52:28]: Always: :DefaultLogPath = C:\Users\opsmgr\AppData\Local\SCOM\Logs
[11:52:28]: Always: :path = F:\Setup\AMD64\
[11:52:28]: Always: :setupexepath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :ArchitectureIs64Check = True
[11:52:28]: Always: :OperationManagerAgentInstalled = 1
[11:52:28]: Always: :Collection ListOfSupportedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMCONSOLE
[11:52:28]: Always: : [1] = OMSERVER
[11:52:28]: Always: : [2] = OMWEBCONSOLE
[11:52:28]: Always: : [3] = OMREPORTING
[11:52:28]: Always: :install = 1
[11:52:28]: Always: :installpath = C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
[11:52:28]: Always: :EulaFilesPath = C:\Users\opsmgr\AppData\Local\SCOM\Setup
[11:52:28]: Always: :HealthServiceTypeId = AB4C891F-3359-3FB6-0704-075FBFE36710
[11:52:28]: Always: :hsPort = C51B7833-DA54-1653-D8FD-1A738EF8DED5
[11:52:28]: Always: :ServerBlockReason = A Operations Manager agent was found on this computer. Please remove the agent and then run Setup again.
[11:52:28]: Always: :ScreensLoaded = 1
[11:52:28]: Always: :Collection ListOfSelectedComponents (System.Collections.ArrayList):
[11:52:28]: Always: : [0] = OMREPORTING
[11:52:28]: Always: :OMREPORTING = 1
[11:52:28]: Always: :SelectDatabaseInstanceReloadScreenInformation = 1
[11:52:28]: Always: :ReloadPrerequisitesPageChoice = PrerequisitesProgressPage
[11:52:28]: Always: :LoadedPrerequisiteXmlFile = True
[11:52:28]: Always: :PrerequisitesCheckXMLLoaded = True
[11:52:28]: Always: :CountFilteredPrerequisites_Failed = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Warning = 0
[11:52:28]: Always: :CountFilteredPrerequisites_PassedWithChoices = 0
[11:52:28]: Always: :CountFilteredPrerequisites_Passed = 10
[11:52:28]: Always: :PrerequisiteState = Passed
[11:52:28]: Always: :XmlFilteredPrerequisites_Passed : Begin XML property
[11:52:28]: Always: :<?xml version="1.0" encoding="utf-8"?><Root><Title TitleText="OMREPORTING"><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="memoryCheckTitle" descriptionBody="" descriptionTitle="ReportingMemCheckPassed" resolution="ReportingMemCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ntfsCheckTitle" descriptionBody="" descriptionTitle="ntfsCheckPassed" resolution="ntfsCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="DriveSpaceCheckTitle" descriptionBody="" descriptionTitle="ServerDriveSpaceCheckPassed" resolution="ServerDriveSpaceCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="OSVersionCheckTitle" descriptionBody="" descriptionTitle="OSVersionCheckPassed" resolution="OSVersionCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="WindowsInstallerCheckTitle" descriptionBody="" descriptionTitle="WindowsInstallerCheckPassed" resolution="WindowsInstallerCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="RemoteRegistryCheckTitle" descriptionBody="" descriptionTitle="RemoteRegistryCheckPassed" resolution="RemoteRegistryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="PendingRebootCheckTitle" descriptionBody="" descriptionTitle="PendingRebootCheckPassed" resolution="PendingRebootCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="ActiveDirectoryCheckTitle" descriptionBody="" descriptionTitle="ActiveDirectoryCheckPassed" resolution="ActiveDirectoryCheckResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="IsComputerNameValidTitle" descriptionBody="" descriptionTitle="IsComputerNameValidPassed" resolution="IsComputerNameValidResolution" /><Detail state="Passed" image="pack://application:,,,/SetupChainerUI;component/GreenCheck.png"
name="AVIcodeAgentCheck" descriptionBody="" descriptionTitle="AVICodeAgentCheckPassed" resolution="AVICodeAgentCheckResolution" /></Title></Root>
[11:52:28]: Always: :End XML property
[11:52:28]: Always: :ManagementServer = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :DefaultSDKMachine = WDC-SYSOPS01.landmarc.local
[11:52:28]: Always: :UserCanceledInstall = 1
[11:52:28]: Always: :InstallSuccess = 1
[11:52:28]: Always: :End: Property bag dump.
[11:52:28]: Debug: :CEIP disabled. CEIP data will NOT be sent.
[11:52:28]: Always: :Application Ended: Successful
[11:52:28]: Always: :
[2014-03-26T11:52:28.4724357+00:00]: Always: Trace Session Ended

Hi,
According to the error message:
[11:52:11]: Error: :getSQLInstanceVersion: Unable to find the SRS Instance Key: MSSQLSERVER
[11:52:11]: Info: :Info: WDC-SYSSQL01 SRS version =
[11:52:11]: Error: :Couldn't check SRS version: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or too long.
The issue is SQL report server database related, I would like to suggest you create a new report database for SCOM and then check the reuslt. Please refer to the below links and follow it to set up SCOM 2012 R2:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
In addition, here is thread for your reference also:
http://social.technet.microsoft.com/Forums/en-US/3f883b7f-5a33-49f0-a40d-f3311e68609d/unable-to-connect-to-the-data-access-service-installing-report-server?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Failure to install SQL Server 2012 SP1 CU8/9 with a "Failed to retrieve data for this request." error

Hi all,
Has anyone come across SQL Server 2012 SP1 CU8/9 failing to install with a “Failed to retrieve data for this request.” error.
The error is too generic for a useful search on web, for me at least anyway.
Had no problems patching a whole bunch of other servers in the same environment.
I’m no good at reading these error logs. For some reason the primary replica is referenced in the detailed log???
The CU8/9 patch has been run by both Domain Admins and local Admin with no luck.
We are trying to patch a secondary failover replica. (SharePoint 2013 is installed on this server.)
This is from the summary log:
Overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure,
review the log files.
Exit code (Decimal): -2146233088
Exit facility code: 19
Exit error code: 5376
Exit message: Failed to retrieve data for this request.
Start time: 2014-04-10 11:51:11
End time: 2014-04-10 11:51:49
Requested action: Patch
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3412.0&EvtType=0xB2652E58%400xDC80C325&EvtType=0xB2652E58%400xDC80C325
Machine Properties:
Machine name: VMSPDB2
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: Australia
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: Yes
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database
Engine Services 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server
Replication 1033 Enterprise
Edition 11.1.3000.0 No Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text
and Semantic Extractions for Search 1033 Enterprise Edition 11.1.3000.0 No
Yes
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data
Quality Services 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Basic 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Management Tools - Complete 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
Client Tools Connectivity 1033 Enterprise Edition
11.1.3000.0 No Yes
SQL Server 2012
SQL Server Data Tools 1033
Enterprise Edition 11.1.3000.0 No Yes
SQL Server 2012
Integration Services 1033
Enterprise Edition 11.1.3000.0 No Yes
Package properties:
 Description: Microsoft SQL Server 2012 Service Pack 1
 ProductName: SQL Server 2012
 Type: RTM
 Version: 11
 SPLevel: 1
KBArticle: KB2931078
 KBArticleHyperlink:
http://support.microsoft.com/?kbid=2931078
 PatchType: QFE
 AssociatedHotfixBuild: 0
 Platform: x64
 PatchLevel: 11.1.3412.0
 ProductVersion: 11.1.3000.0
 GDRReservedRange: 10.0.1000.0:10.0.1099.0;10.0.3000.0:10.0.3099.0
 PackageName: SQLServer2012-KB2931078-x64.exe
Installation location: e:\90a192411a98d1f6dc\x64\setup\
User Input Settings:
 ACTION: Patch
 ALLINSTANCES: false
 CLUSTERPASSIVE: false
 CONFIGURATIONFILE:
ENU: false
 HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
 INDICATEPROGRESS: false
 INSTANCEID: <empty>
 INSTANCENAME: <empty>
 QUIET: false
 QUIETSIMPLE: false
 SQMREPORTING: false
 UIMODE: Normal
 X86: false
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: The rule result report file is not available.
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
 Message:
 Failed to retrieve data for this request.
 HResult : 0x80131500
 Data:
 HelpLink.ProdName = Microsoft SQL Server
 HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
 HelpLink.LinkId = 20476
 HelpLink.EvtType =
0xB2652E58@0xDC80C325
 DisableWatson = true
 Stack:
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
 at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
 at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
 at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer context)
 Inner exception type: System.ComponentModel.Win32Exception
 Message:
 Not all privileges or groups referenced are assigned to the caller.
 HResult : 0x80004005
 Error : 1300
 Stack:
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey
key)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey
machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView,
String regPath, RegistryAccess registryAccess)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
 at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
And the tail of the detailed log:
(01) 2014-04-10 11:51:29 Slp: Completed Action: InitializeMsiExtension, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: AddPackageModifierSourcesAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: AddPackageModifierSourcesAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: InitializeConfigAction
(01) 2014-04-10 11:51:30 Slp: Completed Action: InitializeConfigAction, returned True
(01) 2014-04-10 11:51:30 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:30 Slp: Running Action: RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:31 Slp: Running discovery on local machine
(01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are
assigned to the caller.
at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
 at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
 at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess
registryAccess, Boolean& alreadyCached)
 at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
 at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
 at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
 at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 --- End of inner exception stack trace ---
 at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
 at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath, String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:36 Slp: Error: Action "Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction" threw an exception during execution.
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Setup.Chainer.Workflow.ActionExecutionException: Failed to retrieve data for this request. ---> Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to
retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean enable)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx, String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView
regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String machineName, RegistryView regView)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:36 Slp: --- End of inner exception stack trace ---
(01) 2014-04-10 11:51:39 Slp: Received request to add the following file to Watson reporting: C:\Users\HS2\AppData\Local\Temp\tmp6614.tmp
(01) 2014-04-10 11:51:39 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
(01) 2014-04-10 11:51:39 Slp: Inner exceptions are being indented
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: Exception type: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80131500
(01) 2014-04-10 11:51:39 Slp: Data:
(01) 2014-04-10 11:51:39 Slp: HelpLink.ProdName = Microsoft SQL Server
(01) 2014-04-10 11:51:39 Slp: HelpLink.BaseHelpUrl =
http://go.microsoft.com/fwlink
(01) 2014-04-10 11:51:39 Slp: HelpLink.LinkId = 20476
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.ProcessDTbl(DataTable dt, Int32 level)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectSqlDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.CollectDiscoveryData(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.SqlDiscoveryDatastoreInterface.LoadData(IEnumerable`1 machineNames, String discoveryDocRootPath,
String clusterDiscoveryDocRootPath)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.SetupExtension.RunDiscoveryAction.ExecuteAction(String actionId)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.ExecuteActionHelper(TextWriter statusStream, ISequencedAction actionToRun, ServiceContainer
context)
(01) 2014-04-10 11:51:39 Slp: Inner exception type: System.ComponentModel.Win32Exception
(01) 2014-04-10 11:51:39 Slp: Message:
(01) 2014-04-10 11:51:39 Slp: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:39 Slp:
(01) 2014-04-10 11:51:39 Slp: HResult : 0x80004005
(01) 2014-04-10 11:51:39 Slp: Error : 1300
(01) 2014-04-10 11:51:39 Slp: Stack:
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege(Boolean
enable)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege..ctor(String privilege)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Configuration.Sco.SqlRegistry.GetLocallyCachedLocalMachineSubKey(ServiceContainer
ctx, String machineName, SqlRegistryKey key)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.TryLocallyCacheRegistryKey(ServiceContainer ctx,
String machineName, SqlRegistryKey machineKey, String registryPath, RegistryView regView, String regPath, RegistryAccess registryAccess, Boolean& alreadyCached)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryUtils.GetLocalMachineSubKey(ServiceContainer
ctx, String machineName, RegistryView regView, String regPath, RegistryAccess registryAccess)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.GetSql2kMsiInstanceListInHive(String
machineName, RegistryView regView)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.DiscoveryEnumObject.LoadSql2kInstanceList(String machineName)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Discovery.Product.GetData(EnumResult erParent)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData()
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Environment.GetData(Request req, Object ci)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.GetData(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:39 Slp: at Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process(Object connectionInfo, Request request)
(01) 2014-04-10 11:51:44 Slp: Watson Bucket 2
Original Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : Microsoft.SqlServer.Management.Sdk.Sfc.Enumerator.Process
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.Sco.AdjustTokenPrivilege.SetPrivilege
(01) 2014-04-10 11:51:44 Slp: Parameter 3 :
Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException@-2146233088
(01) 2014-04-10 11:51:44 Slp: Parameter 4 :
System.ComponentModel.Win32Exception@-2147467259
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 1300
(01) 2014-04-10 11:51:44 Slp:
Final Parameter Values
(01) 2014-04-10 11:51:44 Slp: Parameter 0 : SQL Server
2012@RTM@KB2931078
(01) 2014-04-10 11:51:44 Slp: Parameter 1 : 0x6785B09D
(01) 2014-04-10 11:51:44 Slp: Parameter 2 : 0xB2652E58
(01) 2014-04-10 11:51:44 Slp: Parameter 3 : 0x74E34741
(01) 2014-04-10 11:51:44 Slp: Parameter 4 : 0xDC80C325
(01) 2014-04-10 11:51:44 Slp: Parameter 5 : RunRemoteDiscoveryAction
(01) 2014-04-10 11:51:44 Slp: Parameter 8 : 0xA05EFA62
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Microsoft SQL
Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft
SQL Server.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key Uninstall to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:45 Slp: Sco: Attempting to write hklm registry key MSSQLServer to file C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140410_115053\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
(01) 2014-04-10 11:51:45 Slp: The following exception occurred while preparing registry logs during Watson failure processing: Not all privileges or groups referenced are assigned to the caller.
(01) 2014-04-10 11:51:46 Slp: Failed to retrieve data for this request.
(01) 2014-04-10 11:51:46 Slp: Watson bucket for exception based failure has been created
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\110
(01) 2014-04-10 11:51:46 Slp: Sco: Attempting to get registry value EnableErrorReporting
(01) 2014-04-10 11:51:46 Slp: WER: Successfully read app consent from registry Software\Microsoft\Microsoft SQL Server\110\EnableErrorReporting=0.
(01) 2014-04-10 11:51:46 Slp: WER: Application level consent value '0' was mapped to consent status 'WerConsentDenied'
(01) 2014-04-10 11:51:46 Slp: WER: Result of the submission:: 'WerDisabled'
(01) 2014-04-10 11:51:46 Slp: WER: Submitted 1 of 1 failures to the Watson data repository
(01) 2014-04-10 11:51:46 Slp: Sco: File 'C:\Windows\system32\Cluster.exe' does not exist
(01) 2014-04-10 11:51:46 Slp: Failed to collect cluster logs, cannot find Cluster.exe under system directory.
(01) 2014-04-10 11:51:46 Slp: Dumping final cluster state.
(01) 2014-04-10 11:51:49 Slp: Completed dumping final cluster state.
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: ----------------------------------------------------------------------
(01) 2014-04-10 11:51:51 Slp:
(01) 2014-04-10 11:51:51 Slp: Error result: -2146233088
(01) 2014-04-10 11:51:51 Slp: Result facility code: 19
(01) 2014-04-10 11:51:51 Slp: Result error code: 5376
(01) 2014-04-10 11:51:51 Slp: SQM Service: Sqm does not have active session.

Hello SQL Ranger,
Thanks for posting the detailed log. I dont have exact solution for this but I can give you some hint what could be reason patch has failed below message points to fact that there is some issue with account which is used to install CU patch.Have alook at
below log.It says that when patch was trying to get details from other node in cluster it was not able to.
01) 2014-04-10 11:51:33 Slp: Discovery on local machine is complete
(01) 2014-04-10 11:51:33 Slp: Running discovery on remote machine: VMSPDB1
(01) 2014-04-10 11:51:35 Slp: Discovery on VMSPDB1 failed due to exception
(01) 2014-04-10 11:51:36 Slp: Microsoft.SqlServer.Management.Sdk.Sfc.EnumeratorException: Failed to retrieve data for this request. ---> System.ComponentModel.Win32Exception: Not all privileges or groups referenced are assigned to the caller.
IMO I strongly feel it is issue with the account. Microsoft has also documented about this for SQL Server 2008 .Have a look at following links
http://support.microsoft.com/default.aspx?scid=kb;en-US;2000257
Please also assign privilege mentioned in below link
http://www.bradg.co.za/?p=12
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error Calculating InstanceID when installing SQL Server 2012 SP1 on Windows 7 Home Premium SP1

Hello...
I know this issue has been on several tickets but I have not been able to find a satisfactory solution. I am receiving error 0x85640001 "...error calculating instanceid" when I attempt to install SQL Server 2012 Developer Edition DVD.
I have downloaded the ISO for the enterprise evaluation product and tried burning it to a DVD-RW and decompressing the ISO to my desktop for installation without success.
The log files do state the setup process runs into a badimageformat exception.
I had SQL Server 2008 Developer edition installed on this laptop, but I have completely removed all prior SQL Server instances (using the uninstall wizard in Control Panel).
Please let me know what you suggest to correct this problem.
Thank you for your help!

Hello,
1. Uninstall any SQL Server 2012 component using Control Panel.
2. Download the Evalaution Edition from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=29066
3.Perform an edition upgrade from evaluation edition to developer edition using the current media.
http://technet.microsoft.com/en-us/library/cc707783(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Install error SCSM 2012 SP1 _PopulateUserRoles

Similar Messages

Maybe you are looking for