Install Error "This Application has Unexpectedly Quit"

Anyone have this Java installation issue? Right after I
choose the language and try to install I get "This Application has
Unexpectedly Quit", followed by "Invocation of this Java
Application has caused an Invocation TargetExcepction...."
Thanks for any ideas.

An update on my previous post. I tried to reinstall itunes from the cd that came with it. It installed successfully and then when I went to find it in APPS and add it to my dock the system crashed
Here is the full message:
System Failure: cpu=0; code 00000008 (unknown failure code)
Latest Crash info for cpu0:
Exception state (sv=0x2A122780)
PC=0x00094080; MSR=0x00001030; DAR=0xF740C402; DSISR=0x40000000; LR=0x00093F8C; R1=-xFC14FB47; XCP=0x00000098 (System Failure)
backtrace terminated - unaligned frame address: 0xFC14FB47
Proceeding back via exception chain:
Exception State (sv=0x2A122780)
PC=0x0008C784; MSR=0x02143000; DAR=0xF740C402; DSISR=0x40000000; LR=0x0008AF24; R1=0xFC14FC27; XCP=0x00000008 (0x200 - Machine Check)
backtrace terminated - unaligned frame address: 0xFC14FC27
then it had another list of exception states, then it lists a Kernel Version:
Darwin Kernel Version 7.9.0 with an attached date
Then a Memory Access Exception (1,0,0)
an ethernet mac address
ip address
and Waiting for debugger connection.
After this it is doing nothing. It is frozen on the screen. I'm not sure those numbers and letters will help anyone identify the issue but I thought I'd try.
Any help would be HUGELY appreciated!!

Similar Messages

Consistent "This Application has Unexpectedly Quit Messages"

I have a 15" Powerbook G4 800MHz with 1gb of RAM (I upgraded from 512 to 1gb a couple of years ago). Recently it has been quitting out of applications consistently. It started when I opened iTunes and was in the store trying to buy an album, everytime I got to the buy now screen it quits with the "Unexpectedly Quit" message. I thought it might be the actual iTunes program so I trashed the existing one and went to apple.com to download the new one. Again, when I got to the DOWNLOAD NOW button, it "Unexpectedly Quit" yet again. On all of these I have shutdown and restarted multiple times, shut down for the night and restarted the next evening, Repaired Disk Permissions, etc. What could be causing it to repeatedly quit? It basically renders the machine useless. I am quite a novice on the "fix it" side so assuming I don't know something is probably safe. I have been out here on this discussion forum looking for the topic that really covered my issue and I haven't found one. So I am posting this.
thanks in advance!!

An update on my previous post. I tried to reinstall itunes from the cd that came with it. It installed successfully and then when I went to find it in APPS and add it to my dock the system crashed
Here is the full message:
System Failure: cpu=0; code 00000008 (unknown failure code)
Latest Crash info for cpu0:
Exception state (sv=0x2A122780)
PC=0x00094080; MSR=0x00001030; DAR=0xF740C402; DSISR=0x40000000; LR=0x00093F8C; R1=-xFC14FB47; XCP=0x00000098 (System Failure)
backtrace terminated - unaligned frame address: 0xFC14FB47
Proceeding back via exception chain:
Exception State (sv=0x2A122780)
PC=0x0008C784; MSR=0x02143000; DAR=0xF740C402; DSISR=0x40000000; LR=0x0008AF24; R1=0xFC14FC27; XCP=0x00000008 (0x200 - Machine Check)
backtrace terminated - unaligned frame address: 0xFC14FC27
then it had another list of exception states, then it lists a Kernel Version:
Darwin Kernel Version 7.9.0 with an attached date
Then a Memory Access Exception (1,0,0)
an ethernet mac address
ip address
and Waiting for debugger connection.
After this it is doing nothing. It is frozen on the screen. I'm not sure those numbers and letters will help anyone identify the issue but I thought I'd try.
Any help would be HUGELY appreciated!!

The application (all adobe applications) has unexpectedly quit

Hello everyone,
I have a problem with my Adobe Cs3 Design Premium package. I don't know if i have the correct forum section.
I now managed to install this software correctly on mac osx but when i try to start one of the application they will all give me the very same error message!
"The application (all adobe applications) has unexpectedly quit
A crash report has been generated. To provide us with the best chance of fixing this problem, please select Continue to add a detailed description that includes the steps required to reproduce the crash."
Adobe will use this crash report to help find a future solution to this problem.
I had 512mb but upgraded it later to 2gb. Mac OSX is installed on a pc machine.
Does anyone know this issue? and what can i do about it?
I really appreciate any help,
Jasper Bakkker

Hi Hugo
1. Do You have upgraded QuickTime to v.7 if not don't, else downgrade to
6.5.2
2. Do You have enough free space on Your hard disk eg 20Gb recommended
3. Do You start Your projects from within iMovie with the function
Share/Export to iDVD. I don't. I use the ref. movie in the project
folder/icon and close iMovie so that only iDVD is running
4. Do You do other thing during DVD-processing. Don't.
Yours Bengt W

The application has unexpectedly quit???

Hello,
I have been using iMovie, and iDVD for a few years now. Nothing fancy, just home videos, but I really enjoy it, and I feel very good when a project is done and I can share it with my family.
My most recent project is a group of iMovies based on the first 4 years of my middle daughter's life. I title each movie by year (1990, 1991, 1992 and 1993). Each movie has titles, transitions, soundtrack music, and "chapters" added, all standard iMovie stuff.
My problem is that this project will not work. The project starts out fine, just like always, with the little sideways barber pole spinning away, but when I come back several hours later to check on it, there is a window stating that the "application has unexpectedly quit" and asking me if I want to submit a report to apple. This has not happened before.
The first time it happened, I did all the things I have learned to do when iMovie tries to act up or give me trouble, specifically: I deleted the iDVDplist, I "repaired permissions", and I even ran "Cacheout X" and restarted my computer. But after all that, when I tried the project again, it "unexpectedly quit" again.
I don't know what to do now? I have read that many people have had trouble with iDVD chapters being placed at transitions. I thought this must be a problem with the new iDVD5, because I have always placed chapters at transitions (and at the very beginning of a project) and I have never had a problem before.
Since I don't know what else to do, I am going to go back and move the chapters around avoiding the beginning, and any transitions, and see if that makes a difference. Other than that, can anyone suggest anything else I could try?
Would upgrading to iLIFE '05 help? I actually own it. I have had the box sitting on my desk for months, but I have been reluctant to load it because of many of the problems that I have read about in these forums. In my case, iDVD4 has been working very reliably for me, and my thought was "if it ain't broke, why fix it?" Well, now it seems to be broken, so, should I try to fix it?
Any thoughts or suggestions would be greatly appreciated,
Lincoln

Thank you David,
I appreciate your advise. As you suggested, I went back and moved all the chapters from each of the iMovies. I have never NOT placed a chapter at the very beginning of a project, and it seems strange for the "2nd" chapter to be listed as chapter #1 (since the first chapter "Beginning" is implied), but--- it worked!
It is hard to say exactly what worked, because I also created an entirely new project. It was an exact duplicate of the original project in every way (except for the new chapter locations), but I simply couldn't figure out how to "update" the original project after I made the changes, and I thought that making a new project would be the easiest thing.
So it is probably the chapter changes that fixed it, but perhaps there was some wierd problem with the first project. The other thing I was wondering about was that this project was less than 2 hours long, but not by much. When I looked at the "Status" section, I had used 3.8 of the available 4.0GB for video.
But the bottom-line is that I am very happy that the project is complete, and I continue to be amazed at the high quality movies and DVD's I am able to create with the iLIFE programs.
Now that this crisis is over, what is your opinion of iLIFE '05? Should I take the plunge and load it up, or keep working with programs that I am happy with? I must admit that I would love to have access to the new "THEMES" in iDVD, but as you can plainly see, I am simply not computer saavy enough to handle any of the new problems that I have read so much about in the iMovieHD, and iDVD5 discussion groups.
Thanks again,
Lincoln

During rutime of application: Error: this application has requested the runtime to terminate

The application is runing on a server. It's running several days until thethe error "this application has requested...." (see attachement) occurs.
How can I get further information, about the reason for thiserror?
Kind regards,
Daniel
Attachments:
Error.jpg ‏22 KB

I think the error occurred somewhere within the program SyncSAP. If this is a LabVIEW program, we might be able to suggest where it could be failing, but would need to see the code.
BS

ITunes 5 - The application has unexpectedly quit.

I kept getting "The application has unexpectedly quit" message when trying to launch iTunes 5. If I logged out and logged back in again, then I could open it, but I'm not gonna do that everytime I want to launch iTunes.
Anyway, I had 2 Scripts in the Library/iTunes/Scripts folder under my user folder, (i.e. Dan/Library/iTunes/Scripts). When I removed the scripts from the folder, iTunes launched without crashing.
Then, to try to determine if that was the cause of the problem, I quit iTunes, put the scripts back in the folder, tried to launch iTunes again, and got the application has unexpectedly quit" message again.
So, I've taken the scripts out of the folder, and it's working again. Then, I noticed that there used to be a little Script icon in the menu bar, but now it's not there. Maybe Apple doesn't want the scripting option there.

I think the problem may be memory. 64mbs of ram with osx is apparently not enough. But any other ideas would still be appreciated. I'll get back once I get more ram in.

Application has unexpectedly quit

Hay their, I am using Mac OS 10.2.8 with Classic 9.2. I am facing problem in some of my softwares, problem is when ever I try to run a software it comes up with the message (application has Unexpectedly quit) and it crash back to the main screen. I checked those software on my other mac which has same OS and it works fine on it, is their any solution for it or any suggestions ......
Thanks.

The following may help:
http://discussions.apple.com/thread.jspa?messageID=607542&#607542

Install error: "This application cannot be installed because this installer has been mis-configured.

I need help with an error I am receiving. I'm on a Mac with OS X Mavericks. I just attempted to install the Photoshop Elements trial and, in attempting to open the "Install Adobe Download Assistant", I received this error:
"Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-
configured. Please contact the application author for assistance."
I did attempt to download a new copy of the installer, with the same result.

you can download directly:
if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

IDVD wont open. "Application has unexpectantly quit"

This is starting to **** me off. I'm trying to open up iDVD to burn a video. The message "The application iDVD has unexpectantly quit." How can it quit if it's not even open? Any ideas?
Message was edited by: NEwherebutA&M

May I add to these discussions? I listened to all the hype of changing over to Leopard and am starting to regret falling for it. I have been with macs for many years with very few problems and have, indeed sung its praises, now we have Leopard!!! Prior to upgrading from 10.3 to 10.5 and subsequently 10.5.1, I backed up all my files onto a LaCie 500 ghz (Porsche) external drive.
To begin with my Speedtouch modem ceased to function,, now have a Netgear router, all is restored. 2nd I cannot burn cds or dvds. 3rd iDVD does not work. 4th my remote hard drive does not mount, just clicks away merrily but no icon.
Where do we go from here? Do I have to purchase the latest iLife? Is it coincidental that my remote hard drive doesn't function as it should? (it mounts onto my old fashioned imac G3 OS9!!)
Any answers would be most welcome.
Cheers

Installing Latest Firefox on Windows XP Embedded gives error: "This application has failed to start because pdh.dll was not found"

I'm trying to install the latest (standards-based) browser I can on on old Windows XP Embedded computer. The computer's hardware does not meet the "Recommended Hardware" of a Pentium 4 (it has a P3). I initially tried installing/running Firefox version 28, and that seemed to work fine. Version 36 gives the error I stated in the question. It's not paramount that I run the *latest* version of Firefox (the browser is ONLY used for an intranet application), but I'd like to install the latest version that will run, and if there's a simple fix for this version, I'd like to explore that.
Regards,
Gerrat

Well, I was pretty sure it didn't have malware. It was running a steady state - like program & we have dozens of these on our network (but not on our domain). We have a corporate anti-virus (Sophos) running on all the computers on our domain, and there are no notifications of anything suspicious coming from these units.
Just to be sure I installed and ran an antivirus scan against it though - as suspected, nothing suspicious found.
As I mentioned, FF 28 runs fine, it's just the latest (36.0) that doesn't run (I haven't tested any versions in between). Either seems to install without hitch, but when the latest version is run, it gives the error about the missing dll.
Regards,
Gerrat

"this application has unexpectadly quit' AUGH! help.

hey gang!!
when i try to reset safari, or empty the safari cache, NO MATTER WHAT! every single time the program "unexpectadly quits"!!!
why is it doing this?? and more importantly, how do i make it STOP doing it!
it also does that with Installer... it quits on me too.
Its very annoying... i notice it happens randomly with all sorts of applications... things keep "unexpectidly quitting"
if anyone can give me some tips advice or maybe a solution, it would be GREAT!!!!
thanks so much for your time,
Jenny

I had what sounds like the exact same problem a few months ago.
Strangely the fix (once I figured it out) was extremely easy.
For some reason, when I have the "computer voice" function set to be used when an alert message comes up, it will cause the problem you described on my system. I talked to another guy who was able to recreate the problem on his Mac, so I suspect it is a compatability glitch between the voice function and 10.3.9. So few people use the function, that it seems to have gone unnoticed.
If this is the problem, all you have to do is go into your System Preferences. Go into the "Speech" settings, then "Spoken User Interface". If you have anything in there turned on, simply turn them off.
Once I did that, the problem went away completely.
Hope that helps.

Since upgrading to FireFox 6 I cannot run Firefox in Avast Sandbox - get error "This application has failed to start because xul.dll was not found". Firefox works fine outside Avast Sandbox.

The error box is entitled
firefox.exe - Unable To Locate Component.
It suggests re-installing may fix the problem but I've un-installed and re-installed firefox a number of times and no change.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

? Error "This application has requested the Runtime to terminate it in an unusual way"

I have had this error message each time i try to open my copy of Adobe reader in Windows Vista. The next window says the program is now closing but promises that Windows will send a solution but it never does. Does anybody have a solution?
Shandon.

I have
some problem ,I also would like a answer.Did you send this to the support,if you did like to know answer.THANKS

When I am uploading photos to facebook, this appears - RUNTIME ERROR - this application has requested the Runtime to terminate in an unusual way. Please contact the applications support team for more information.

it always happens just when I have clicked on browse to select the photo for uploading. I have done the full updates things for crashes.

See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows

FSL-06002 Error 14001 This application has failed to start

Hello Folks
I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
The installation is under Windows 2003 server SP2 and Oracle 920
I'm in the Database Instance Installation (non-unicode) and phase 29 (Updating database statistics)
The following error is:
TRACE [synxccuren.cpp:452]
 grantAccessTo
Granted access rights 0xf01ff for object default to user chavez-server\mauadm with inheritance flags 0.
TRACE [synxccuren.cpp:1045]
 CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: mauadm.
ERROR 2009-08-23 13:27:58
FSL-06002 Error 14001 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
) in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\MAU\SYS\exe\run/brconnect ...).
When i ran the brconnect manually i received the same error (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem)
When i ran brconnect using cmd.exe i received the following error
E:\usr\sap\MAU\SYS\exe\run>brconnect.exe
The system cannot execute the specified program.
I think is important mention this, i had problem 1 setp before about the brtools 7.00
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output:
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance MAU failed
BR0280I BRCONNECT time stamp: 2009-08-23 13.06.43
BR0804I BRCONNECT terminated with errors
I downloaded the correct version (640) DBATOOLS Package for Oracle 9.2 and i replaced the files
Please folks someone have any idea about this, i tried search on the web and nothing, on the marketplace and nothing
Thanks all for your help

>
Markus Doehr wrote:
> > I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
> > The installation is under Windows 2003 server SP2 and Oracle 920
>
> and something on top: 640_EX2 is only for Oracle 10g - it won't work with Oracle 9.2. So you should change your kernel to 640 back - then the R3DLLINS works.
>
>
>
>
> Markus
Ok Markus, i did the following
First i downloaded vcredist_<platform>.exe from Microsoft web page and retry the installation
And the following error i got
Operative System open's a Window that say following
brconnect.exe Unable to locate component "this application has failed to start because orasql10.dll was not found. Re-installing the application may fix this problem"
And this is the log
WARNING 2009-08-23 17:52:07
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 128. Output:
ERROR 2009-08-23 17:52:07
CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 128. SOLUTION: See brconnect.log for details.
Second i downloaded the kernel 640 whitout ext2 and i get the following error
INFO 2009-08-23 17:41:32
Output of E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU is written to the logfile brconnect.log.
WARNING 2009-08-23 17:41:32
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output: BR0801I BRCONNECT 6.40 (51)BR0252E Function _popen() failed for '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' at location BrPipeOpen-4BR0253E errno 2: No such file or directoryBR0272E Execution of program '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' through pipe failedBR0303E Determination of Oracle version failed
ERROR 2009-08-23 17:41:32
CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 3. SOLUTION: See brconnect.log for details.

Install Error "This Application has Unexpectedly Quit"

Similar Messages

Maybe you are looking for