Install Exchange on a 2013 Member server and later join it to a domain

I'm installing Exchange 2013 on a 2012 Server at our depot. It will be joined to a SBS2003 Domain at a later date. What precaution do I need to make. Especially during the preinstall?
Bonnie Whalon

That is exactly what I meant by "no".
An Exchange installation is more than installing the bits, it's configuring everything, which includes a huge amount of configuration in Active Directory. Further once you've installed Exchange on a member server, you can't rename it.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Similar Messages

Installing Exchange 2007 on a Windows Server 2008

Hello I am new to the Microsoft forum and I have a quick question and please let me know if im posting my question in the wrong place. Im doing a school project were you have two servers with Windows Server 2008 installed on them. The first server suppose
to have Active directory and domain services followed by dns which I did. The second server which I just found out suppose to have installed Netframework 3.0, Wpa and Desktop experience roles then install Microsoft Exchange 2007. Well my issue is when I try
to install exchange on my second server it keeps giving me a error message saying my Active directory cannot be contacted or may not exist and that my second server has the wrong security credentials. I've taken the steps that Microsoft has advise by checking
my domain. Which I used the command Dcdiag.exe on my first server and it saids the domain is able to be contacted. Also when I joined my second domain I made sure to put the domain name of the first server in all caps followed by /Administrator and my password
and it said welcome to the domain. So has anybody run into that type of error message when trying to install exchange 2007 on a separate server? Lastly forget to include I also have web server IIS installed on the second server as well. Exchange is then asking
for IIS 7.0 ? So any tips or troubleshooting would be helpful since my professor wasn't much a help and I gotta turn this lab stuff in by next week.
thanks gmoney38

Not sure I need to check that through the dns is working far as ive seen in the server manager . Because I remember before I did this one command for the dns and it said something was wrong with the host A record. So I went through the hierarchy of
windows to that file and opened it up through the notepad it showed my loopback ip address 127.0.0.1 and localhost and not my domain name which I choose contoso01.com so from a previous forum I read if you change the localhost name to that domain name
that it would help but im not sure if this would in my case. Thanks for answering my question Mr. Ed but I still need some more help through!
gmoney38 ps plus im using vmware for this project to have the two servers i wonder if this is why im having issues!

Network Load Balancing between SharePoint 2013 App server and WFE

Hi,
Can we do NLB between SharePoint 2013 App server and WFE Server ?
Below is our Architecture,
1. WFE Server (1)
2. APP Server (1)
3. Database Server
4. Domain Controller
We have configured NLB but, when we stop IIS on APP server, SharePoint 2013 web app link is not working.
is it possible ?
Please help us

You can do NLB between WFE and APP server however make sure that web application service is started from central admin which host sharepoint sites.
Why do you stop IIS on APP server, definitely it will not be able to host web app sites. rather you can just disable APP node on NLB to test it.

How do I install two instances on the same Server and avoid a conflict?

Hi,
I have one Server and I want to install two instances of SQL Server on it.
1. Will be a default instance.
2. Will be a named instance.
The Server has an IP address of 192.168.0.10 and the default instance will be using port 1433.
I want them to share the same address, but be listening on different ports.
Do I,
1. Go into TCP/IP of the named instance and set the port numbers for all the IP's to a port number, e.g. 1976?
2. Delete the 0 from the dynamic ports sections?
3. Create an open port rule in the Windows Firewall to allow access to the Server?
Thanks

Hi,
Please see following Microsoft link
Configure SQL Server to listen on Specific port
Configure Windows firewall to allow SQL Server access
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Is it possible to migrate Small Business Server 2008 to Exchange 2013 install on it's own member server?

Trying to figure out of migration to Exchange 2013 is possible on a existing SBS 2008 with Exchange 2007. If it's possible, is it support by Microsoft as well?
Thank you!

Are you planning to get rid of the SBS server or you would like to keep it as a DC, DHCP, DNS, and SharePoint server?
You should be able to upgrade to Exchange 2013, but there are more details to consider. The following six part series outlines this process:
Migrate from SBS 2008 or 2011 to Standard Edition Products
Step by Step Screencasts and Video Tutorial

2 exchange 2013 multirole server and 1 addess for Outlook Anywhere. How to?

Hello everybody.
I'm coming to you with a question about my new Exchange 2013 infrastructure.
I have 2 Exchange 2013 SP1 servers. Both are multirole (CAS + MBX). My servers are Server12 and Server13.
I created a DAG which IP adderss is 192.168.3.30 (Servers IP are 3.31 and 3.32). Everything's working fine.
For CAS High Availability, I followed this thread : http://exchangeserverpro.com/exchange-2013-client-access-server-high-availability/
On my firewall, I use NAT to send https flow from my public IP address (mail.domain.fr, external domain
published on internet) to point to mail.domain.org (internal domain, non published on Internet). The mail.domain.org alias is my record defined in my internal DNS to
point to my 2 multirole server, as shown in the tutorial above.
I encounter a problem with external outlook anywhere. My problem comes with Outlook Anywhere which is not working fine when I redirect https flow to my cluster IP address (192.168.3.30) (DAG's address, corresponding to my servers). If I do the same redirection,
but pointing to only one of my servers, it's working fine. In Exchange, external outlook Anywhere directory points to mail.domain.fr
But anyway, if this servers goes down, I have to change manually the NAT on my firewall. And I don't want to :).
How can I do ? Can I do something without a physical load-balancer?
Thanks

You cannot point Outlook Anywhere to your DAG cluster IP address. It must be pointed to the actual IP address of either server.
For no extra cost DNS round robin is the best you will get, but it does have some drawbacks as it may give the IP address of a server you have taken down for maintenance or the server has an issue.
You could look to implement a load balancer but again if you are doing this for high availability then you want more than one load balancer in the cluster - otherwise you've just moved your single point of failure.
Having your existing NAT and just remembering to update it to point to the other server during maintenance may suit your needs for now.
If you can go into more detail about what the high availability your business is looking to achieve and the budget we can suggest the best method to meet those needs for the price point.
Have a great day
Oliver
Oliver Moazzezi | Exchange MVP, MCSA:M, MCITP:Exchange 2010,Exchange 2013, BA (Hons) Anim | http://www.exchange2010.com | http://www.cobweb.com | http://twitter.com/OliverMoazzezi

Help !! Exchange 2007 - attempted to install Tools on a seperate 32bit server and it installed entire Exchange

Now I have another instance of exchange showing up in Exchange 2007 -- This was installed on a 32bit windows 7 VM
I have not rebooted it yet but it is listed on my exchange server as an additional exchange server.
It is not in add / remove so I cannot uninstall. Please any help -- Thanks so much

Thanks for your quick response.
If you go to the EMC the win7 box was showing up as an additional Exchange server under my original.
This is where panic set in.
After a bit of time the Exchange showed up in add/remove on the win7 box - was no there at all prior.
was then able to remove CAS and Transport roles from the win7 box -- the Mail role could not be removed
screamed about remote registry service...
Went back to exchange GUI and the entry for the win7 box was gone..
Thanks
Think its solved

Infopackage-Load Many Files from Application Server and later Archive/Move

Hi All..
I have a doubt,   I have a requirement of take many files to load into BI 7.0.. I used the infopackage before with option:
Load Binary File From Application server
I load information successfully... only with one file ...but If I can load many files (with different names) like the next list.. I think it's not a good idea modify the file name (path) on infopackage each time).. :
*All of this files will be on one server that itu2019s map into AL11.. Like
Infopfw
BW_LOAD_20090120.txt
BW_LOAD_20090125.txt
BW_LOAD_OTHER_1.txt
u2026.
Etc..
This directory it's not in BW server.. It's other server..but I can load form this location (one file by one)
Could you help me with this questions:
-     How can I Use an infopackage with routine that take all the files..one by oneu2026 in order of creation dateu2026and load into Target? Is it possible?.. I have some knowledge of ABAP.. but I don´t know exactly how I can say to system this logicu2026
-     In addition is it possible move this files to other locationu2026 like into Infopfwarchive u2026 just to have an history of files loaded.
I saw that in infopackage you have an option to create a routine.. in ABAP codeu2026 Iu2019m a little bit confused because I donu2019t know how I can specify all the path..
I try with:
Infopfw
InfopfwFile.csv
Infopfw
This is the abap code that automatically you see and you need to modifyu2026
Create a routine for file name
This routine will be called by the adapter,
when the infopackage is executed.
          p_filename =
          p_subrc = 0.
Thank you for your ideas or recommendations.
Al

Hi Reddy, thank you for your answer
I have some doubuts.. when you explain me the option:
All the above files are appending dates at the end of the file....
You can load the files through infopackage by using Routines and pick the files based on date at the end of the file..***
I need to ask you if you think that when you know the date of the file and the infopackage pick each file... thi can work for many files??... or how it's possible control this process?
About this option, I want to ask you If when you menction Unix code... where it's programed this code?.. in the routine of BW Infopackage??
****Or
Create two folders in your BW in Application server level, in AL11 (ask Basis team)
I call it is F1 and F2 folders.
First dump the files into F1 I assume that the file name in F1 is "BW_LOAD_20090120.txt", using Unix code you rename the file and then keep in the same foleder F1 or move to F2.
Then create InfoPackage and fix the file name (i.e. you renamed), so you don't need to change everyday your file name at infopackage level.Because in AL11 everyday the file are overwrite.
To I get BW_LOAD_20090120.txt file in F1, then I renamed to BW_LOAD.txt and loaded into BW, then tomorrow I get BW_LOAD_20090125.txt in F1, then I renamed to BW_LOAD.txt....
so in this way it will work.You need to schedule the Ubix script in AL11.
This is the way how to handle the application server...I'm using the same logic.
Thank you soo much.
Al

If I have vlans on switches named differently and they join the same VTP domain what happens?

I have a switch that has vlan 10 as accounting and the other switch has it Accounting. What happens when they join the same domain? Do they keep their respective names?

What are the VTP mode of both switches?
If they are both Server then the one with the HIGHEST revision number will copy the VTP database TO the other unit.

Is possible to install exchange,sharepoint,SQl on server essentials or standard?

hi,
I like to know if that is possible to install exchange,sharepoint, SQL On essential server or standard server and use them.
I know that installing SQL is noy a good idea on domain server.I know also there is office 365 .
I like to know just in case.
johan
h.david

Hi
You can install exchnage 2013 & Exchange 2010 Sp1 on Essentials.But you cant install SQL and SharePoint on essential.
You can install and use exchnage,SQL,SharePoint on Server 2012 r2 standart without any problem.Sql on Domain controller not right config.You could intsall SQL another server.

Installing Exchange 2013 management tools

I am unable to install Exchange Management Tools on other server in network. I am getting error when trying to run unattended setup "exchange server.msi failed. Fatal error during installation. Error code is 1603. Last error reported by the MSI
package is 'Error reading from file: C:\Users\backup-admin\Downloads\Exchange2013\RemoteScripts\ConsoleInitialize.ps1. Verify that the file exists and that you can access it". Also tried to run the setup.exe, but this option not highlighting
"Management Tools" option to select.
Mohammed Qamaruddin

Hi,
Please try the following cmdlet to solve this issue.
set-executionpolicy unrestricted
If this doesn’t work, please try to copy the
ConsoleInitialize.ps1 from a working server to this server then reinstall Exchange management Tool.
If this still doesn’t work, we should consider to re-download Exchange Server 2013 Management Pack from this
site, then try to install.
Related document:
https://technet.microsoft.com/en-us/library/bb232090%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
Best Regards.

SQL 2008 R2 small business server OS edition check fails on SBS 2011 premium install on SBS member server.

I am having trouble installing SQL 2008 Small Business Edition on top of MS 2008 std from the SBS premium suite. I recieve the SQL Server 2008 R2 setup log error stateing "Operating system supported for edition "Failed". The specific error is "EditionRequirementCheck
Failed" This SQL server edition is not supported on this operating system.
The SQL 2008 server is a valid SBS domain member server and sees the SBS domain just fine. I have tried re-installing the OS. Not selecting any options except the SQL engine, verbose logging as per How to diagnose "Operating system supported for edition"
pre-requisite errors while installing SQL 2008 Standard Edition for Small Business with no success. (no log.txt generated), enabled browsing, and other items with no luck.
I got the software from MVLS under the specific SBS 2011 premium section. It doesnt seem right or sees something to keep it from installing. The SBS AD box is clean with all FSMO and root functions assigned to it. There are no trust relationships or
child domains. I have licenses for 75 users. Of course there is no tool, log or utility to find what the actual issue the SQL installation is seeing. SOS! Help!!!

I meet all prerequisites that can be verified.
I am installing it on the SBS Premium Server 2008 R2 OS from MVLS with the ISO file ending in 29732.
I am on a valid SBS 2011 domain.
The new SQL box is joined to the domain as a member server.
THe SBS server contains alll FSMO roles and is the root of the AD.
There are no trust relationships or child domains.
There is NO way that I can find to determine the number of user and device licenses that it "senses" on the domain. I dont know which ones to count. I am licensed for 75 users and have less than that useing the network. There is no licensing monitor or meathod
I can find to actually verify what the SQL install sees.
I am doing all this logged in as the domain admin.
The troubleshooting steps at the bottom of the post refrenced do not work or I am doing them wrong. I cannot find an output file when I enable verbose logging for the SQL install. I believe if I figure out how it may point the way to the block. Thanks

Cannot install Exchange 2010 on Win Server 2k8R2

I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.

Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

Installing program on server and access it from mac workstation

Hi
How can i install a program on a mac server and access that program from mac workstation.
On windows server you use the remote app manager application to do this. is there something similar on mac?

Hi,
- This isn't exactly what you are asking for but there is an App: /System/Library/Coreservices/Screen Sharing.app on the Mac which is similar in operation to Terminal Services Client but is based on VNC.
- Thus it will be a whole user's logon session which would run on the mac server .
I haven't used Screen Sharing.app on a large scale deployment of clients connecting to an OS X Server.
Hope this helps

After I installed the patches, the server and Jdeveloper do not start, Why?

I installed the patch 1,2,3 and mandatory patch 4369818 this afternoon. It showed installing is successful. But after the installing, I do not start the server and Jdeveloper.
05/11/27 22:21:28 java.lang.Thread.run(Thread.java:534) This is the server error.
When I start the Jdeveloper, the picture of starting flashed and disappeared. I don't know why. PLS people who know causes reply to me. I will feel grateful to you.

some questions to help us understanding this ssue a little bit better ..
1) what plattform and what versions of jdeveloper and bpel
2) pls run jdev.exe and not jdevw.exe to get a debug window ,, what exception does it show there..
3) is the message you posted the only one you've ssen on the server?
thx clemens

Install Exchange on a 2013 Member server and later join it to a domain

Similar Messages

Maybe you are looking for