Install fails j2re-1_4_2_01-windows-i586.exe

I'm also having this problem with j2sdk-1_4_2_01-windows-i586.exe. The install starts ok, but I ghen get "Failed to extract file Dll_.ini" from the binary table. the 1.3 runtime installs fine, but it looks like the installer changed with 1.4

I finally got this running, but it doesn't make a lot of sense. I took a look at: http://support.installshield.com/kb/view.asp?pcode=ALL&articleid=Q105416&source=support_central&product=wind
I wasn't willing to make all the security changes it suggested, but tried a couple of them which didn't work and I restored the original permissions. I noticed that most if not all gave permissions to local admins, but not domain admins. That gave me the idea of trying log on to the local machine. I did that and both the jre and jdk installed without a hitch. I can't explain why this worked as this machine and my office machine are virtually the same and I built most of both networks. I log on to both machines with my domain userid. The office machine worked the first time. I will be taking a look at the installshield article again to compare the settings on both machines.
Bottom line, try logging in on the local machine and installing.
bp

Similar Messages

J2re-1_4_1_01-windows-i586.exe Microsoft Visual C++ Runtime Library Runtim

I am using Netscape 6.2.1, Windows 98
I download Java(TM) 2 Runtime Environment, Standard Edition 1.4.1_01
* Download j2re-1_4_1_01-windows-i586.exe .
Filesize = 8,015,928 bytes.
When I looked in the directory the file was listed as
j2re-1_4_1_01-windows-i586
7,829KB
Does the file downloaded size discrepency have significance?
Double clicking on the file activated the process:
"After the InstallShield Wizard
Setup Status
Java 2 Runtime Environment, SE v1.4.1_01 Setup is performing the requested operations."
After that function appered to finish with a 100% complete, I received the following error:
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\PROGRAM FILES\JAVA\J2RE1.4.1_01\LIB\UNPACK.EXE
abnormal program termination
OK"
Note, I may have installed Visual C++ in the past but have never used it. Does this error imply there are some missing links to Visual C++ that have confused and caused an error?
Any suggestions would be appreciated.
[email protected]

Hi, crlare,
The official file size
8,015,928 bytes
= (8,015,928 / 1024) kilobytes, since 1 kbyte = 1024 bytes
= 7828.0546875 kbytes
= 7829 kbytes after rounding up
Therefore your downloaded file seems to have the correct size. To make a better check,
1. right click on your downloaded file;
2. select Properties;
3. check the size in bytes in brackets against the official size in bytes; the "bytes used" is the actual space allocated to store the data.
The Visual C++ runtime error is caused by a faulty installation of the Java bundle, which could have arisen due to interference by other applications that are open during the installation of the Java bundle. e.g. Interference by virus protection software running in the background. This error has also been known to occur in the installations of other programs.
To fix the problem, uninstall the Java Runtime Environment (JRE) you have installed, and reinstall it with all non-critical applications closed:
1. Choose Start > Settings > Control Panel.
2. Double-click Add/Remove Programs, select Java 2 Runtime Environment, SE v1.4.1_01 (or something similar), click on the Add/Remove button to uninstall the JRE.
3. Reboot your system.
4. Close all non-critical applications, including background running programs such as antivirus programs and Microsoft Task Scheduler. This can be checked/done by pressing Ctrl-Alt-Del, selecting each item except Explorer (and Systray), and clicking End Task for each.
5. Reinstall the JRE.
6. Reboot your system.
Hope this helps.
Jack

Blue Screen of Death on install of j2re-1_4_2_04-windows-i586-p.exe

Immediately upon installing j2re-1_4_2_04-windows-i586-p.exe, I get the "blue screen of death" on Windows 2000, indicating memory dump. Applications do not work subsequently that use j2re. Attempts to modify in reinstallation indicate errors in Windows installer. Don't know what to do.

Immediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there.

Silent install of j2re-1_4_1_04-windows-i586-i.exe

I am attempting to create an automated install of this application using the silent switches etc
e.g /s /v "/qn ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=D:\java\jre"
However I am unable to get the switches to work. I am prompted with the user dialogs such as Licence Agreement and the type of install
Any ideas
Kevin

Immediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there.

Silent Install of j2re-1_4_2_03-windows-i586-p.exe ???

I have tried to do a silent installtion of j2re-1_4_2_03-windows-i586-p.exe with this command line syntax :
j2re-1_4_2_03-windows-i586-p.exe /S /v/qn"ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=C:\java\jre REBOOT=Suppress JAVAUPDATE=0 /L C:\temp\javainstall.log"
The installation process starts what I could see in Task Manager a process called " j2re-1_4_2_03-w" starts but dissapear in 10 sec and the installation does not continue what I could see. No installation directory has been created and no log etc.
Do anyone have any clue what could be the issue here, do I use wrong syntax etc ??
We are going to use Sun Java runtime instead of Microsoft Java Virtual Machine, when that is going to be unsupported Sept 30 -04.

The correct syntax for the command line should be
j2re-1_4_2_03-windows-i586-p.exe /s /v"/qn ADDLOCAL=ALL IEXPLORER=1 INSTALLDIR=C:\java\jre REBOOT=Suppress JAVAUPDATE=0 /L C:\temp\javainstall.log"
The first " (Quote) should be between the /v and the /qn without any spaces. There should be a space after the /qn and before any other parameters.

Having trouble installing j2re-1_4_06-windows-i586

Hello! I recently built a computer and am trying to install Java 2 Runtime Environment on it. The computer has WinXP, SP2 on it. I downloaded j2re-1_4_06-windows-i586 from Java.com and began to install it. Towards the end of the installation process, a message popped up saying "Java(TM) Update (1.4.2_14-b05) cannot be installed on this machine because the Java(TM) Virtual Machine is currently running. Please close all running Java(TM) applications, especially browsers." I have run into this problem in the past with another XP machine. I don't recall how to correct it though. What do I need to do to fix this?
M Ridzon

I'd suggest check the running processes on the machine and see if a Java VM is running, if so, kill it from the Task Manager.

J2re-1_4_2_06-windows-i586-p Slient Intall not work... pls help...

I've created a batch file to slient install j2re 1.4.2 for our PC, just like below:
@echo off
C:\java\j2re-1_4_2_06-windows-i586-p.exe /s /v "/qn /L C:\Java\setup.log REBOOT=Suppress JAVAUPDATE=0 IEXPLORER=1"
exit
after I run the batch file, task manager showed the process "j2re-1_4_2_06-windows-i586-p" for just a few second... after that, nothing has been done...
I would like to ask what is the problem with the batch file ? our computer all running with WinXP SP2,
Thank you very much

Ok. I think i've found a solution that at least it's working for me. Don't ask me the exact details, because i'm no java expert. I believe it's related to the java version firefox recognise. In my case, since i'm using 2.0.0.6, all i did was add this parameter for my config section:
jpi_mimetype=application/x-java-applet (pick the lastest one installed i guess).
Now, everything it's working OK.
Best regards, Luis ...!

J2sdk-1_4_1-windows-i586.exe corrupted (cannot unpack)

I cannot install j2sdk 1.4.1.
First I downloaded it from http://java.sun.com/webapps/download/DisplayLinks
"You have chosen to download Java(TM) 2 SDK, Standard Edition 1.4.1
Download j2sdk-1_4_1-windows-i586.exe .
Filesize = 37,724,482 bytes."
to
c:\Downloads\j2sdk-1_4_1-windows-i586.exe 37,724,482 bytes
Correct number of bytes.
Double-clicking on this file brings up a dialog with title
"Java 2 SDK - InstallShield Wizard"
with a progress bar labelled "Reading contents of package..."
The progress bar reaches 100% and then starts from 0 again. Shortly after, the dialog is replaced with an error dialog stating:
"The contents of this file cannot be unpacked. The executable you are attempting to run has been corrupted. Please obtain another copy of the file, verify its integrity, and try again."
This is the third time that I have tried to install the Java 2 SDK and each time I have had the same result. Each time the downloaded file has had the correct number of bytes. There are many posts here describing the same problem, but I have not seen one that has a universal solution.
It seems to me that the problem is to do with the installation environment:
Operating system: Windows 95 Copyright 1981 � 1996
Pentium MMX 166 MHz, 64 MB RAM, 3GB unused disk space
J2SDK-1_4_1-WINDOWS-I586.EXE Dependencies:
File Version
ADVAPI32.DLL 4.71.118.0
COMCTL32.DLL 5.81.4807.2300
GDI32.DLL 4.0.0.950
J2SDK-1_4_1-WINDOWS-I586.EXE 2.11.15.0
KERNEL32.DLL 4.0.0.1111
LZ32.DLL 4.0.0.950
SHELL32. DLL 4.0.0.1111
USER32. DLL 4.0.0.950
I have 2 versions of InstallShield installed. I think that the problem is with my operating system or my InstallShield installations. Anyone know the solution?

Window 95 is not supported for this version and you are at the ragged edge as far as processor speed.
This is the beginning of the installation instructions that are on the download page:
"System Requirements
The JavaTM 2 SDK is supported on Microsoft Windows 98 (1st or 2nd edition), Windows NT 4.0 with with Service Pack 5 or later, Windows ME, Windows XP, Windows 2000 with Service Pack 2 or later, running on Intel hardware. In non-English locales, the only edition of Microsoft Windows 2000 tested with this release is the Professional edition.
Note -- Trying to install the Java 2 SDK on a non-supported version of Microsoft Windows or on a machine that doesn't have a sufficiently up-to-date Service Pack will cause the installer to generate this warning: "We recommend that you do not install this Java(TM) Platform for the following reasons: This Java(TM) Platform does not support the operating system or operating-system service pack on this machine."
A Pentium 166MHz or faster processor with at least 32 megabytes of physical RAM is required to run graphically based applications. Forty-eight megabytes of RAM is recommended for applets running within a browser using the Java Plug-in product. Running with less memory may cause disk swapping which has a severe effect on performance. Very large programs may require more RAM for adequate performance.
You should have 120 megabytes of free disk space before attempting to install the Java 2 SDK software."

Jdk-7u75-windows-i586.exe is not a valid Win32 application

Hello all,
I am having trouble in installing jdk on my window vista which is 32-bits. I have downloaded jdk from download.oracle.com/otn-pub/java/jdk/7u76-b13/jdk-7u76-windows-i586.exe.
I have tried all things mention in discussion jdk-7u3-windows-x64 installation issues
I will appreciate any help.
Thank you in advance.

Can you elaborate on the type of trouble you are having while installing? Error codes?
-Roger

How to repackage "jre-7u72-windows-i586.exe" application and deploy through SCCM 2012

Hi,
Along with IE 11 we are planning to deploy "jre-7u72-windows-i586.exe"
Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield.
Identified vendor .MSI file at
%AppData%\LocalLow\Sun\Java\jre1.7.0_72\jre1.7.0_72.msi"
%AppData%\LocalLow\Sun\Java\jre1.7.0_72\Data1.cab
Created Transform file
Created transform file for "jre-7u72-windows-i586.exe" by using Adminstudio Installshield with the Tuner feature
My queries:
Do we have any best practices while repackaging “jre-7u72-windows-i586.exe?” by Adminstudio
How to deploy the jre-7u72-windows-i586.exe application assuming with parallel deployment of IE
11.
Do we uninstall lower versions of Java when installing any newer versions like jre-7u72-windows-i586.exe?
if yes then how to handle
Do we install jre-7u72-windows-i586.exe application without uninstallations of any lower version of JAVA , if yes then how to handle
Looking for best practices / Customizations ?
Thanks, appreciate your help.
Han,
Gc.Hanumareddy

Alternatively, why not actually reference Oracle official documentation or post in their forums (because as Torsten said, this really has nothing to do with ConfigMgr or Microsoft even).
http://java.com/en/download/help/msi_install.xml looks to be a great place to start.
Jason | http://blog.configmgrftw.com | @jasonsandys

Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4

Hi
Sorry for re-posting on this JAVA FX Installation Form form (earlier on JAVA FX general )
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Status : Not able to install
Error : JavaFx(Tm) 1.2 can not be installed on system esrlier than Windows XP x86
May be my OS ( Window 2000 SP4 ) obsolete but I cannot update since Major of other (JAVA 1.5) dev happens on my system
Any Ideas ..... :(
with regards
Karthik

Don't crosspost, please!

Need this version of JAva to work on mozila jre-6u21-windows-i586.exe

hi i need java jre-6u21-windows-i586.exe to work with mozila because i need especially this version. i do not access web from this computer.
thanks

Alternatively, why not actually reference Oracle official documentation or post in their forums (because as Torsten said, this really has nothing to do with ConfigMgr or Microsoft even).
http://java.com/en/download/help/msi_install.xml looks to be a great place to start.
Jason | http://blog.configmgrftw.com | @jasonsandys

Java Web Start didn't install with j2sdk-1_4_2_04-windows-i586-p.exe

I just uninstalled all my java stuff from my XP Pro system
then re-installed... j2sdk-1_4_2_04-windows-i586-p.exe
With the SDK installation... j2re1.4.2_04 also installed... I think this is the Java Runtime
But, before I had a folder for Java Web Start... not I don't...
AND, the file... javaws-1_2-windows-i586-i.exe
refered to on the Java Web Start Installation page isn't on my system anymore...
(It was in an older vrsion of the Java Runtime... ( I had 2 java Runtimes at once installed, that is why I uninstalled... and even though I had Java Web Start, it wasn't working... so I deleted everything and reinstalled the j2sdk-1_2_04-windiws-i586-p.exe.)
I would just download the java Web Start but the docs tell me it should be installed when the SDK and Runtime are installed... so I worry if I got the installation correct.
Can anyone please advise me of how to get things working again.
thanks for any help - Will

I fixed this broblem just install both JDK and JRE.

Error installing jdk-1_5_0-windows-i586.exe

During second phase of the install process, I get this error message: "Error 1311.Source file not found: C:\Program Files\Common Files \Java\Update\Base Images\jdk1.5.0.b64\patch-jdk1.5.0b64\jo150000.cab. Verify that the files exists and that you can access it." After clicking Cancel, OK, and Finish, the installer indicates that the JDK was successfull installed. However, the public JRE was not installed. I have uninstalled the JDK and attempted to repeat the install several times with the same results..
I' m installing on Windows-XP Home Edition. I have previously installed the second beta and followed the instrustions to unstalling it before installing the release version.
I also have 1.4.0 and 1.4.2.02 installed.
Help

I am receiving a similiar error message:
Error 1311. Source file not found: c:\Documents and Settings\tee3\Local Settings\Temporary Internet Files\Content.IE5\58W7LIST\Down[1].htm. Verify that files exist and that you can access it.
This is strange because I have installed jdk 1. 5.0 before and I did not get this error. I needed to re-install the jdk1.5.0 in a different directory. Thats why I am re-installing it. I first un-installed it and then tried to re-install it. Thats when I get the error message above.
does anyone have a fix for this.

Solaris 9 Install Fails at Console Window

I am attempting to install Solaris 9 on an Ultra 10.
Ran boot cdrom from OK prompt, using the install directory.
Got to the selection of language fine, (selected English)
CDE started up, and then got a console window.
It displays the standard install stuff, up to the first prompt:
Can c0t2d0s1 be used ...
The mouse does not respond, and I can not change focus to the console window. I have tried ALT-Tab, ALT-ESC, F10, ALT-Up arrow, ALT-Down arrow, and many more keyboard combinations.
Any suggestions?
Thanks,
Craig

i want to report I found my problem. I had checked the mouse cable to the keyboard, and it was fine. Today I checked the cable from the keyboard to the box, and the center pin was pushed in.
Pulled it out and now the mouse responds.
Bad troubleshooting on my part, eh?

Install fails j2re-1_4_2_01-windows-i586.exe

Similar Messages

Maybe you are looking for