Install failure - damaged or incomplete

Hello,
I was attempting to use the Linotype Font Explorer and it crashed (which wasnt unusual).. unfortunately, when trying to restart the program, it demanded that I re-download the free ware to update. Upon downloading, I again attempted to mount the new dmg file, but receive the alert:
"You cannot open this application because it may be damaged or incomplete."
After trying a number of times to redownload and reinstall, I located another Font program dmg file from a completely different website and got the same alert and failure. It seems that attempting to mount and install any new dmg files gives the same. My DiskImageMounter in .... /System/Library/CoreServices/ also fails with a similar alert.
I searched the discussion boards and am following a comprehensive post by George Orville regarding "Disc Image will not Mount/Open" and am in the process of Repairing Permissions (although it's taken a long time and my machine seems to be running hard).
Any thoughts or suggestions as to what happened or how to fix it?
Please?
Many thanks.. Adam
PowerBook G4   Mac OS X (10.3.9)  

I'd stop running Repair Permissions; there are obviously some permission problems if it's not getting past a certain point. It should take a few minutes at most, not hours.
If I were you, I would try booting from your OS X install disc and running Repair Disk; if it finds any problems it can fix, run it again until it reports no more fixable problems. Should it find problems it can't fix, stop using your computer immediately, get a copy of DiskWarrior onn CDd and use it to check your disk and repair the directory.
After that, assuming your disk is fixed, you should be able to boot normally and use your Mac again. You may have to reinstall some software or reset some preferences. If you can't boot normally, then you may have to reinstall OS X using Archive & Install.
Mulder
If this answered you question, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz   Mac OS X (10.3.9)  

Similar Messages

  • Put old I  life on new computer now I photo dosn't work it says cant open because it may be damaged or incomplete so all my pictures can not be accesed how do I get back to I photo or take what I installed off with out losing all my pictures?

    I got a new Mac and was trying to burn from I movie to get it to a disk but new I mac dose not have I DVD . So I had my old I Life 11 disc with I DVD on it and I installed it, when I did this it did something to my I photo I can not open it at all it has a message that reads ,you can't open the application IPhoto because it may be damaged or incomplete . Now I can not get or see any of my photos how do I reverse what I did? can I take that I Life back out and how? with out losing all my pictures? and how do you burn to DVDs now without IDVD?

    Diane,
    Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
    Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
    So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
    Next download iPhoto:
    https://itunes.apple.com/us/app/iphoto/id408981381?mt=12

  • I downloaded updates to iphoto and computer erred on install. I cannot open iphoto. I decided to reinstall iphoto from app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???

    I downloaded updates to iphoto and computer erred on install. A report went to Apple.
    I cannot open iphoto. I decided to reinstall iphoto from my app disk and now I get an error message"......iphoto may be damaged or incomplete"  Any suggestions how to get iphoto going again???
    My iphoto library still exists and I don't want to lose it.

    https://discussions.apple.com/community/ilife/iphoto

  • ILife '11 installed and now iPhoto won't open, "damaged or incomplete".

    I was unable to use iDVD after having Mountain Lion installed.  I had an iLife '11 disk and I installed it.  I didn't see any changes in the application folder so I used the iLife '11 disk again, found the iDVD application and selectively installed it.  Now I have and iPhoto icon with a white circle crossed out and when I try to open iPhoto, I get the message,  "You can’t open the application “iPhoto.app” because it may be damaged or incomplete."
    I don't know what version of iPhoto I have because there are just two dashes after the "version" when I Right Click and select "Get info" on the iPhoto.app line in Finder.
    I have been reading support blogs for hours last night and this morning.  I am afraid to try any of the fixes because I have already caused problems for myself and my problem doesn't seem to exactly match anyone elses problem, but seems to be a mixture of more than one problem. 
    I have a backup harddisk that was set to the time machine before I had my computer repaired.  It only backs up to Dec 2, 2013.  I have not hooked it up again yet out of fear that it will start backing up and mixing old with new.  I had Lion before the repair (new video disk) and when I received the computer, Mountain Lion was installed.  This was last week.  I specifically asked that Mavericks not be installed because I was reading so much unhappiness with it.
    So - any help extremely appreciated.  I am frozen.

    You need to reinstall. There is no choice.
    Note the instructions below for reinstalling from Disk:
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    I specifically asked that Mavericks not be installed because I was reading so much unhappiness with it.
    There is much unhappiness with every version of every Os and App everr released - roll back to the release of Mountain Lion and you'll see exactly the same type of commentary. In the main, much of this commentary is useless.
    The problems are manifold: for a start, happy people are less likely to review, unhappy people are much more inclined to. That's why we don't have thousands and thousands of posts on this forum from all the people who have no problems saying "look I have no problems". Unhappy people get cross and are more likely to express that anger in negative reviews.
    Then what about the reviewer? What is his or her knowledge, experience and skill level? No doubt they are having problems, and real ones, but how do you know if their issues are problems with the app, their own inexperience, third party conflicts and so on. I've seen people on here claim the fact that iPhoto won't edit video is a bug. I've seen hundreds and hundreds of posts from folks on here who are certain they've found a bug, only for their glitch to be resolved. No review is worth anything unless you know something of the reviewer, his or her knowledge and experience.
    So frankly, I never bother with those reviews on any such stores, not just iPhoto on the Mac App Store.

  • I just installed iLife on my new Imac version 10.8.2 and now I can't open my iPhoto app.  It says that I Photo is damaged or incomplete.  What do I do to restore my iPhoto and pictures!

    I just installed iLife on my new iMac 10.8.2 version and now I can't open my iPhoto app.  It says it is damaged or incomplete.  What can I do to get it back along with all of my picutures?  I was told by an Apple employee at my one to one training that it was OK to install iLife to get the iDVD that I wanted. Help!

    I have installed iLife a few times and because of photostream, the version on the disc must be updated.  Software update usually takes care of it.  It sounds like you installed an old version over a new version.  I've not tried that.
    You have a late 2012 machine, if you open the Mac app store from the dock, you should be able to go to the purchased tab and download/install the right version of iphoto.  Honestly, you should not have used that disc on this new of mac or at least only installed iDVD & iWeb but not garageband, iphoto, and iMovie.
    If the Mac App Store shows iphoto as installed already, drag the app from your applications folder to the trash and reinstall it again from the Mac App Store.  That is the version you need.  You may find garageband and imovie have similar problems.
    good luck.
    PS.  your photos are in your photo folder in your home folder.  don't touch those, I'm talking about the app "iphoto" in the applications folder.

  • I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc.  The message I get says "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!

    I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3)  after installing ilife 11 from a disc.  The message I get is "you can't open the application iPhoto because it may be damaged or incomplete.  What can I do?!  Any help will be greatly appreciated.

    Reinstall it.This time delete the receipts first.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
    Important:
    As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

  • Error message after 10.8.2 Install: SpeechSynthesis.app is damaged or incomplete. What should I do about this?

    I installed 10.8.2 and it seem to go well except at end an error message reading 'Error SpeechSynthesisServer.app damaged or incomplete'. What should I do about this and what apps would be impacted?

    Triple-click anywhere in the line below to select it:
    codesign -vv /S*/*/*/A*/*/A/*/S*/*/A/S*S*S*
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste (command-V) into the Terminal window.
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.

  • ID Install -  Can't open the application Adobe InDesign CS6 because it may be damaged or incomplete.

    Trying to install inDesign CS6 on my imac. But everytime I try at end of install I either get a problem with install error, or if it does show up in my applications folder, it has a "no" sign and when clicked I get:
    "You can't open the application Adobe InDesign CS6 because it may be damaged or incomplete."
    Need help, Im a freelance desktop publisher and need this to work!

    After I deleted Adobe File Manager because it was always popping up annoyingly, I got a similar "damaged application - reinstall" message. However, InDesign didn't seem to be affected. Nevertheless, I reinstalled AFM, and fixed the problem, except for the annoying appearances of AFM.
    If it's not present on your system, you can search Google for "download adobe application manager mac" without quotes, to download and install it.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • After installing Maverick, my downloaded movies will not play in Quick Time.  It gives me the following error "You can't open the application "QuickTime Player.app" because it may be damaged or incomplete."  What can I do?

    After installing Maverick, my downloaded movies will not play in Quick Time.  I receive the following error message:
    You can’t open the application “QuickTime Player.app” because it may be damaged or incomplete.  So I tried to unistall QT and I get an error that says, You can not delete this application as it is a requirement for the OSX.
    Well I did find a way to delete it, by going into the various components and one by one deleting it.  Now I reinstall it and  the message is that this Quick Time is for an earlier version before Maverick 7.  SMH....Now what.?

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • I keep getting the error message: " You can't open the application "%@" because it may be damage or incomplete" when I try to install a software that I purchased.

    I have a typing software that I bought a while ago. I had installed it on an old pc but I just bought a macbook and I'd like to install it onto the new macbook, as I no longer use the old pc. When I open the installer, I get the error message: " You can't open the application "%@" because it may be damage or incomplete"
    Does anybody know if this is fixable or if I need to just buy a new disk?
    Thanks!!!

    I copy pasted this from the developers website for the minimum requirements of your device: Macintosh® OS X 10.4 – 10.5, PowerPC G4, G5 or Intel Core Duo processor, 800 MHz processor or higher, 256 MB RAM, CD/DVD-ROM drive, 300 MB free hard disk space, Video card with 32 MB of video RAM, 1024 x 768 24-bit color display, Speakers, keyboard & mouse.
    Does a macbook pro meet these requirements?

  • HT1338 Why am I getting a message "You can't open the application iPhoto because it may be damaged or incomplete" - v11, purchased and installed before Lion upgrade

    I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw  that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
    Suggestions?

    GrandmaGG wrote:
    I get the message "You can't open the application iPhoto because it may be damaged or incomplete." This is a currently support iPhoto'11. Purchased and installed prior to OS X Lion upgrade. Was working, and now it is not. What might have happened? I saw  that Apple updated iPhoto in the App Store, but that is not where I purchased this. I tried Software Update, but it said all the software was up to date.
    Suggestions?
    Do you have iLife '11 Discs or did you download it from the App Store?

  • I did not realize Ilife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a  circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?

    This sounds different than with my IOS devices, since I am able to see the photos even with a connection to the Internet.
    Do you mean without a connection to the internet? With a connection it's logical you would be able to see the PS.
    The following is from iCloud: Photo Stream FAQ
    Can photos be saved or downloaded from a shared photo stream?
    Yes. Once photos are shared, anyone who can view the shared photo stream can download and keep the photos permanently.
    On a device using iOS 6 or later, you can save photos to the Camera Roll. On a Mac, using iPhoto 9.4 or Aperture 3.4, you can save photos from the shared stream to your local Photo Library or any other location on your Mac. On a Windows PC, you can copy photos from a shared photo stream to any folder. On the web, photos can be downloaded directly to your computer from the detail view of each photo.
    This tells me that the image files are not on the HD unless the subscriber chooses to download them.

  • Having installed Aperture iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    Having installed Aperture, iPhoto won't open. When I try it fails with the message "You can't open the iPhoto.app because it may be damaged or incomplete. Any help please?

    OK, fixed it.  Found that iPhoto is now BACK in the App store.
    Found iPhoto app in Finder and dragged it to Trash.
    Downloaded iPhoto from App store and all now back working again.
    Didnt expect to find iPhoto in App store as last time I looked it wasn't available.
    Nige

  • I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can't open the application "Install Adobe Photoshop 6.0" because it may be damaged or incomplete".

    I just upgraded to photoshop 6 and i cannot install because i am getting a message that reads "You can’t open the application “Install Adobe Photoshop® 6.0” because it may be damaged or incomplete".
    Does anyone know how to fix this problem?

    you probably have an incomplete/corrupt download.
    to confirm check the file size against the expected file size.
    then re-download perhaps with a different browser.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete. can this be repaired without going to the repair shop?

    had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete". can this be repaired without going to the repair shop?

    What installed iPhoto there in the first place?  Was it the same version of iPhoto that came with the Mac?  Was iLife added at a later time from a Mac Box Set?   You can selectively install iPhoto, and then apply the appropriate iLife update without taking it to the shop, after removing the application, or recover it from your backup.

Maybe you are looking for

  • Using mathscript to generate multiple digital outputs for switch control

    Hello  I am new to this NI LV and a have kind of a basic question. I would like to use Mathscript to generate an array of bolean numbers which will be used to control the Digital I/O lines. I am using NI 6251 USB device and the Mathscript code runs w

  • Problem with swap files after reboot.

    Hello I have installed Solaris 10 10/09 s10x_u8wos_08a on a Sun Fire X4140. The file system is UFS. I wish to add more swap space I have created these two files under /export/home: -rw------T 1 root root 5368709120 Jun 16 10:12 newswap -rw------T 1 r

  • Please Help: Problem Playing Songs Imported from CD's

    I know this question has probably been asked before but I have yet to find an answer to help me fix my problem. When I upload songs from a CD to itunes they won't play. It skips over them. There isn't any wierd symbols next to the song that says that

  • Show field mara-MFRPN in the MP02 without double click

    Hi all, Anyone know how to show field mara-MFRPN in MP02? I know that once we enter the internal material, it will show a list of MPNs, but in order to view the vendor manufacturer part number, we need to double click on each of it. How can we view m

  • My screen has a blank section on the right hand side of the screen

    since installing updates my screen has a blank section on the right hand side which remains on start up and operation