Install failure on Korean AIX

An i2 customer is installing Weblogic Server 8.1SP1 on AIX 5.1 (Korean) the silent
install has errors that start with the following warning:
WARN [readCachedArchiveInfo] com.bea.plateng.wizard.installer.silent.tasks.ReadCachedArchiveInfoTask
- Unable to read archive.bea from /tmp/bea49512.tmp
followed by:
ERROR [stringSubst] com.bea.plateng.wizard.installer.utils.stringsubs.StringSubst
- com.bea.plateng.wizard.installer.utils.InstallFileIOException: Error performing
global string substitution on file /tmsad/bea/weblogic81/samples/server/examples/build/examplesWebApp/index.jsp.
sun.io.MalformedInputException
it has been suggested that this is because Weblogic Server 8.1SP1 does not support
AIX 5.1 (Korean) - if that is the case I dont see that documented any where...
so my question is this
1) is the above error familiar to anyone
2) if it is any hints on a problem resolution strategy ?

Hi Adrian,
Please follow this link to see list of supported platforms:
http://e-docs.bea.com/wls/certifications/certs_810/overview.html
If you still have questions about the failure below, let us know.
regards,
Platform team.
BEA Systems
"Adrian Bird" <[email protected]> wrote:
>
An i2 customer is installing Weblogic Server 8.1SP1 on AIX 5.1 (Korean)
the silent
install has errors that start with the following warning:
WARN [readCachedArchiveInfo] com.bea.plateng.wizard.installer.silent.tasks.ReadCachedArchiveInfoTask
- Unable to read archive.bea from /tmp/bea49512.tmp
followed by:
ERROR [stringSubst] com.bea.plateng.wizard.installer.utils.stringsubs.StringSubst
- com.bea.plateng.wizard.installer.utils.InstallFileIOException: Error
performing
global string substitution on file /tmsad/bea/weblogic81/samples/server/examples/build/examplesWebApp/index.jsp.
sun.io.MalformedInputException
it has been suggested that this is because Weblogic Server 8.1SP1 does
not support
AIX 5.1 (Korean) - if that is the case I dont see that documented any
where...
so my question is this
1) is the above error familiar to anyone
2) if it is any hints on a problem resolution strategy ?

Similar Messages

  • Remote Install Failure on AIA3.0

    Hi,
    Remote Install Failure on AIA 3.0:
    AIA 3.0 installations on Windows XP-Pro is failing in Step 4 of 11 with the Error
    "Node manager is down or the username and password entered is incorrect"
    Details on the installation are as follows:
    1) Installation is done on a Windows-XP 32 bit SP2, RAM - 4 GB.
    2) SOA Suite 11gR1 PS1 and Weblogic 10.3.2 successfully installed.
    3) SOA managed server, Admin server and node manager are running successfully on remote server.
    4) The status of Node manager is reachable and has been confirmed through the admin console.
    5) When installing AIA 3.0 use Remote Install option, the 4th step is failing after providing the node manager credentials of remote server.
    Error message is "Node manager is down or the username and password entered is incorrect".
    6) We given remote server configuration on 4th step (Host Name, Admin Port, Domain name, user/pass).
    7) The Remote WLS Server is reachable.
    8) Installer is always looking local node manager is not looking for Remote node manager which one is running on remote machine.
    Error Log
    Adding C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM for deletion.
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/soawl.jar
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/template.jar
    null
    configFileName:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml
    osName:Windows XP
    Inside startPreReqOperation...prereq
    osName:Windows XP
    diskSpaceRequirements from engine:Home id =SoftwareOnlyOraclehome name=Oracle home variable=%AIA_HOME_PATH% fixedSpace=2048 unit=MB condition=null totalSpaceRequired=0 isConditionSatisfiedfalse
    entryPoint: entryPoint = oracle.installType.all condition = null className = null
    contextFile:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\prereq\oui\agent_prereq_context.xml
    The entry point is: oracle.installType.all
    Check Name:CertifiedVersions
    Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
    Expected result: One of 5.1,5.2,6.0,6.1
    Actual Result: 5.1
    Check complete. The overall result of this check is: Passed
    Check Name:ServicePackChecks
    Check Description:This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
    Expected result: 2
    Actual Result: 2
    Check complete. The overall result of this check is: Passed
    Check Name:TotalMemory
    Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
    Expected result: 1024MB
    Actual Result: 3191MB
    Check complete. The overall result of this check is: Passed
    Property File location: D:\AIA3.1\New Folder\cd\Disk1\install\win32\aiaoneclick.properties
    Item State: javax.swing.JComboBox[,170,52,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=AIA3]
    Path: D:\Oracle11GPS\Oracle\Middleware_new\AIA3
    Item State: javax.swing.JComboBox[,170,81,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=D:\Oracle11GPS\Oracle\Middleware_new\AIA3]
    Home: AIA3
    In processFieldStringAIA Home
    In processFieldStringJAVA HOME
    In processFieldStringAIA Home Path
    In processFieldStringAIA Instance Name Contains invalid characters
    getting root directory
    D:\oracle11GPS\Middleware\user_projects\domains\dev_domain
    truevalue for type of install
    D:\Oracle11GPS\Oracle\Middleware_new\jdeveloper
    D:\Oracle11GPS\Oracle\Middleware_new
    *****Web Logic Home: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3
    CLASSPATH: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3\server\lib\weblogic.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adapters.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adf-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\aqapi.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\bpelImport.log;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ccrQueries.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.comdev_6.1.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.config_6.0.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.common.security.api_1.0.0.0_5-1-0-0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.nodemanager.plugin_1.3.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\commonutils.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\connections.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\dms.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\engine.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\enginehelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb.xjc_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest-tasks.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-10.3.1.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-ant.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvesterSettings.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\install.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\jython-modules.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log4fl.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\message.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdbc5.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl-log4j.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneofftool.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soainstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soawl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\SysInfo.dll;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\template.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools11g.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\types.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlcipher.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlfullclient.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wtinstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xmlparserv2.jar;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstaller.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xmlparserv2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\share.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstallerNet.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emCfg.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraPrereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jsch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ssh.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\remoteinterfaces.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\http_client.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchactions.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchprereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchutil.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstImages.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_de.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_es.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_fr.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_it.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ja.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ko.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_pt_BR.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_CN.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_TW.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oracle_ice.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-swingaccess.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\swingaccess.jar;\;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-collation.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-mapping.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ojmisc.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\srvm.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\classes12.jar
    1
    localhost
    LocalMachine
    Connecting to Node Manager ...
    <Apr 29, 2010 4:31:11 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    Either the password and username entered are incorrect or the node manager is down
    Traceback (innermost last):
    File "<string>", line 1, in ?
    File "<iostream>", line 123, in nmConnect
    File "<iostream>", line 618, in raiseWLSTException
    WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : I/O error while reading domain directory
    Use dumpStack() to view the full stacktrace
    Anyone knows how to install AIA Remote Install on the remote SOA server?

    Hi,
    may be you enter the wrong username or password? Or there is a problem with certificate? The look file describe a wrong user name or password or nm is not reachable. Is it possible to start managed server via Admin Console? Please check nm log files.
    Regards,
    Marcel

  • Error while installing oracle 10g on AIX

    I am receiving the following error while installing oracle 10g on AIX..
    error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
    i am installing enterprise edition. pl help

    Hi;
    What is AIX version?
    Please see:
    Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
    AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
    "Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
    Please also check below and be sure you have all prereq. on your server:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Regard
    Helios

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • Error in installing  oralce 10g in AIX 6.1

    Hi , i tried to install oracle 10g in AIX 6.1(p) (64 bit ) but got the following error . Please help me?
    Your platform requires the root user to perform certain pre-installation
    OS preparation. The root user should run the shell script 'rootpre.sh' before
    you proceed with Oracle installation. rootpre.sh can be found at the top level
    of the CD or the stage area.
    SKIP_ROOTPRE environment variable is set, which means
    rootpre.sh was already run as root.
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be 5200
    Failed <<<<

    Hi,
    based on 169706.1 (Modified: 06-MAY-2009) 10.2.0.4 and 11.1 are so far supported on AIX 6.1. Therefore when you install 10.2.0.1 this error is raised because at that time when Oracle 10g R2 was released AIX 6.1 was not available. You should however be able to install the software unsing:
    ./runInstaller -ignoreSysPrereqsInstall first only the software 10.2.0.1. Then patch it to 10.2.0.4 and afterwards run:
    $ORACLE_HOME/bin/dbcaCheers,
    David
    OCP 9i
    http://www.oratoolkit.ch/otn.php

  • Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

    Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
    I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
    Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
    I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 3 warning(s)
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    ----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
    ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
    ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
    Suggestions? thanks.

    Issue resolved with the help of Adobe Support (Mercer).  My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
    My fix was to delete the following empty folders from the Fonts Folder:
    AdobeMingStd-Light.otf
    BickhamScriptPro-Regular.otf
    KozMinPro-Regular.otf
    MyriadPro-BoldCond.otf
    TektonPro-BoldCond.otf
    And then re-run the installer (be sure to empty the trash).
    My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those.  Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

  • Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?

    Hi,
    Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
    Thanks

    Hi
    Yes you can install java engine.Run sapinst from installation master cd and select only java engine installation.There will be check boxes abd you have to choose java engine.Also check the nwo4s installation guide.It will guide you throughly.Keep in mind to use correct jdk required for your kind of installatiom.
    Reward points if useful

  • Error when Installing IBR on IBM AIX

    Hi All,
    I have a problem when installing IBR on IBM AIX.
    The error message is :
    *./setup.sh: /cms/server/temp/ibr/InboundRefinery/linux/Installer: 0403-006 Execute permission denied.*
    Anybody can help me?
    thx in advance,

    What user are you running the install as, do you have rights to do so? Also, are you planning on converting MS office documents? If so, I'd REALLY push for you to install this on a Windows box and not waste your time on AIX for IBR.

  • ZCM Reporting install failure: Wrong OS

    Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

    I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
    It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
    Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
    This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
    Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
    Tim Wessels
    Originally Posted by Craig Wilson
    At this point in time, BOE is only supported on a 32-Bit OS.
    Novell is working with Business Objects to get support for 64-Bit Platforms.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "deban0" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
    > server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
    > 10.1.1 x64. But I got the install message: Not supported OS. Is it true
    > ?
    >
    >
    > --
    > deban0
    > ------------------------------------------------------------------------
    > deban0's Profile: NOVELL FORUMS - View Profile: deban0
    > View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
    >

  • 11g Install Failure, Listener Error.

    11g Install Failure, Listener.
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
    The box is at present not networked and as is not on a domain. The computer name is homedb.
    I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
    Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
    Enterprise manager configuration failed due to the following error -
    Listener is not up. Start the listener and run EM configuration again.
    Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
    You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
    When I click ok on the error message the install completes as normal.
    I can TNSPING orcl which results in the following:
    TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
    008 12:36:33
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Used parameter files:
    C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
    PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
    OK (20 msec)
    I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
    sqlplus sys@orcl and typing in the password I get the following error:
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    This is also the error I get when using sql developer to connect to the db.
    The extract from the log file mentioned above is as follows:
    20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
    Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
    My listener, tnsnames and sqlnet are as follows:
    listener.ora:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    sqlnet.ora:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    tnsnames.ora:
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
    Running the command: lsnrctl service, results in the following:
    LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
    :52
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    The listener supports no services
    The command completed successfully.
    Running lsnrctl status results in the following:
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
    ction
    Start Date 20-JAN-2008 12:09:10
    Uptime 0 days 0 hr. 40 min. 9 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
    ra
    Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
    All firewalls and anti virus software have been disabled for the purposes of this install.
    Do I need to manually register the listener with the database, if so how do I go about doing this?
    I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

    To answer my own question I fixed this by issuing the command
    netsh winsocks reset
    Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
    Hope that helps,
    Adam

  • Import EXPDUMP.001 error when installing NetWeaver 2004s on AIX 5.2.

    I’m trying to install NetWeaver 04s on AIX 5.2. 
    In step 18 “Import Java dump”, I got the following error.
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142-20060824a (JIT enabled)
    J9VM - 20060823_07696_BHdSMr
    JIT  - 20060722_1500ifx1_r8
    GC   - 20060724_AA)
    Dec 11, 2006 2:33:03 PM com.sap.inst.jload.Jload main
    INFO: Jload -sec COT,jdbc/pool/COT,/usr/sap/COT/SYS/global/security/data/SecStore.properties,/usr/sap/COT/SYS/global/security/data/SecStore.key -dataDir /download/SAP_Java/JAVA_EXPORT/JDMP -job /tmp/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS/IMPORT.XML -log jload.log
    Dec 11, 2006 2:33:05 PM com.sap.inst.jload.db.DBConnection connectViaSecureStore
    INFO: connected to COT on jdbc/pool/COT
    Dec 11, 2006 2:33:05 PM com.sap.inst.jload.JobStatus readStatus
    INFO: trying to read status file /tmp/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS/IMPORT.sta
    Dec 11, 2006 2:33:05 PM com.sap.inst.jload.JobStatus readStatus
    INFO: status file IMPORT.sta doesn't exist - no restart
    Dec 11, 2006 2:33:05 PM com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.io.FileNotFoundException: /download/SAP_Java/JAVA_EXPORT/JDMP/EXPDUMP.001 (The file access permissions do not allow the specified action.)
                at java.io.FileInputStream.open(Native Method)
                at java.io.FileInputStream.<init>(FileInputStream.java:129)
                at java.io.FileInputStream.<init>(FileInputStream.java:89)
                at com.sap.inst.jload.io.SplitInputStream.<init>(SplitInputStream.java:48)
                at com.sap.inst.jload.io.DataFile.open(DataFile.java:98)
                at com.sap.inst.jload.Jload.dbImport(Jload.java:237)
                at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
                at com.sap.inst.jload.Jload.main(Jload.java:621)
                at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
                at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
                at java.lang.reflect.Method.invoke(Method.java:391)
                at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    Dec 11, 2006 2:33:05 PM com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected
    But the EXPDUMP.001 is in the right directory and has “rwx” permission for everyone, so not sure what’s going on.
    Anyone could help?

    Hi Harry,
    It may be an error in the JDBC driver try to start the fresh installtion or install the driver.
    Cheers,
    Shyam.

  • Prerequisites for installing OBIEE 10g in AIX

    Hi
    I need the prerequisites for installing OBIEE 10g in AIX.

    Scripts? Oracle installation has intuitive GUI installation. You just need to do some required action before launch of installation. These steps you can find on official documentation http://tahiti.oracle.com or some public papers.
    Anyway there was installation script that prepared the system for Oracle install. It was called DORIS (made by Howard J. Rogers) but AFAIK it is not downloadable anymore.

  • HI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean lan

    Daniel SterchiHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..
    forumnotifierHI i am user for InDesincc TrialVersion now. i have serious question for all guys in here. at first i installed Indesigncc as korean language but now i need to indesigncc english language installation. and then now i cant translate and changing korean language interface to english language interface at indesigncc download. so i wonder How i can do that?...i am very seriuos for now....i want indesigncc version for Eng.Language interface. but now i cant do that .i dont konw how i can presented kor. interfacing transite to eng. interface..

    First of all, uninstall it with the uninstaller.
    Then:
    Install the ENGLISH version.
    Change the language in the CC app to Korean.
    Install the Korean version. (DON't uninstall the English version)
    Change back the langauge in the CC app to English.
    When your OS is running in English, InDesign will run in English with Korean functionality added, if your OS is running in Korean it will take the Korean User Interface, so let your OS run in English.
    Every installer language will add needed plugins for the work with that language. E.g. If I install Hebrew, I get RTL functionality in German version, only if I would change the OS language it would change the language of InDesign, InDesign takes always as UI language the language of the OS if available, if not (in your case you have uninstalled English before), it takes any version which is available in the order of languages specified in the OS.
    If you need to run your program in a different language than the OS but you have installed it in the language of the OS it becomes more difficult. You would have to use some system tools which are able to force a program to open with a different language. Most of those tools are freeware.

  • Premiere Elements 10 install failure on Mac osx 10

    I have a copy of Adobe Premiere Elements 10, the five disk set, and keep having the same failure trying to install it on my Mac. I have gone through all the product requirements and made sure that my computer satisfies them, but I still find an install failure at 51%, Exit code 7, each time.
    What can I do?

    I had the exact same problem installing Premiere Elements 10 on a Mac from DVD.  Exit code 7 when it reached 51% installation.  I followed the link to "updated installation instructions" provided in this forum by Adobe Employee Jeff Wright.  It works.
    The instructions in a nutshell:  DON'T USE THE DVD.  Instead, download a trial version.  When you install use the serial number provided with your DVD.
    I find this to be extremely aggravating.  I spent a lot of time trying using the Adobe Support Advisor application trying to sort through the error codes.  Then I spent time trying to get through to Adobe Support (never did get through).  Finally I tried the forum and found the answer here.
    I find Adobe to be grossly inadequate in two ways.  First, they put out a product that just wasn't tested.  The DVD won't install on a Mac.  It is as if they did not test their product.  Second, their support is awful.  This is a known problem with a known solution.  When the fault occurs, the Adobe Support Advisor application should point the customer to the "updated installation instructions".  Instead it points to faults that are unrelated so the customer is led on a wild goose chase.
    I hope the product will be better than my experience so far.

  • Install RAC ASM on AIX

    I'm trying to find a cook book on how to install RAC ASM on AIX using VIO and HA?

    Hi
    Herewith the documentation link
    http://download.oracle.com/docs/html/B10766_08/preaix.htm
    also that
    http://www.aixservice.co.kr/documents/10g_Installation_V11.pdf
    Ask more question if you have any ...
    thanks

Maybe you are looking for

  • Office Reinstallation

    Hi, I'm Ronald. My mother bought Microsoft Office online on September 28th 2014. She used her e-maill adress ([email protected]) to activate and buy Microsoft Office and this was as well her Microsoft account. Sadly, <sympatico.ca> is a really old e-

  • Error using PCR/ISR scenarions in ESS/MSS

    Hello everyone, We are having errors in ISR/PCR forms on ADS with new additional production portal system. To summarize shortly: Our Portal/ECC landscape consists of two portal systems (dev and prd) and three r3 systems(dev, qa, prd). We have success

  • Photoshop CS5 Extended Trial download link

    For some strange reason I can't use the Adobe download page, I sign in etc but when I click on the download now button nothing happens.  Is someone able to give me the direct url for the trial download?  I've done a similar thing with Indesign and it

  • Intel 3945 roaming issues

    I have some 1242 AP's set up with Cisco Fast roaming. My 3945 clients roam fine, but after a few seconds, they lose their IP address. If I have a constant ping going, my ping will drop for about 3 seconds, then replys will go for about 4 seconds. It

  • Disabling catchall

    As we are getting more and more spam these days I would like to disable catchall mails. I find that catchall mails are coming into the junkmail account, which I monitor for false positives and then whitelist accordingly. Currently the setting in main