Install Failure--Unable to create recovery

I've been trying to install lion on my macbook air and get an error message at the end that it didn't install because it couldn't create a recovery copy. I followed the directions to deal with this (created a bootable external hard drive that has a recovery copy) and I can't get past this point.

As noted in my question, I had followed the instructions in About Lion Recovery to install Lion on an external drive and  then tried to install Lion on my internal drive. When I did that before, I booted from the internal drive and, as noted, had the same failure message. I thought perhaps I should boot from the external drive in Lion and then try to install Lion on my internal drive. This resulted in the same failure. I remain baffled.

Similar Messages

  • Unable to create recovery disk using media creation on hp pavilion g6 2236tx

    i am attempting to make recovery disk of my notebook through hp media creation i am using DVD disks for the same but the problem is that when the processing bar reaches almost 99percent it shows error message that unable to create recovery disk try again later!
    please help!

    Hi saksham_jain,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is  a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7). 
    If this should fail for any reason, please provide the error and any other details.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • 11gr2 silent install error - Unable to create a new central inventory direc

    I am working on SLES 11 SP2 on zLinux and I am trying to install oracle 11gr2 silently. I was able to install the GI and it is running but when I try to install the oracle binaries I keep getting this error:
    [FATAL] [INS-32035] Unable to create a new central inventory directory : /opt/oraInventory.
    CAUSE: The central inventory location provided is not empty.
    The GI install created /opt/oraInventory and all the files are in there. I even changed the owner from grid:oinstall to oracle:oinstall but that did not help. When I did the install on SLES 11 SP1 I did not get this error.
    I am running this command to install oracle: /runInstaller -silent -ignorePrereq -showProgress -waitForCompletion -responseFile /tmp/db_install.rsp
    drwxrwx--- 6 oracle oinstall 4096 Apr 2 10:42 oraInventory
    drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:39 ContentsXML
    drwxrwx--- 3 oracle oinstall 4096 Apr 2 10:41 backup
    drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:41 logs
    -rw-rw-r-- 1 oracle oinstall 52 Apr 2 10:41 oraInst.loc
    -rwxrwx--- 1 oracle oinstall 1650 Apr 2 10:41 orainstRoot.sh
    drwxrwx--- 2 oracle oinstall 4096 Apr 2 10:38 oui
    cat oraInst.loc
    inventory_loc=/opt/oraInventory
    inst_group=oinstall

    That was my last resort because the support is horrible. I am getting the same error during the GUI install also if that makes a difference. Its like the oracle install does not know about the Grid installed already in oraInventory.

  • Unable to create recovery disc, after burn failed to verify

    I had tried thrice  to create recovery disc in DVD but every time MSG comeing some error is there unable to verify
    Kindly Help
    Regards
    Manish

    Recovery partition is meant to be used on a working system, it can however be used in a different manner but is difficult for most people unless you are a computer geek of sorts.
    See this thread on how someone used the files from the restore partition to recover to a new hard drive, you would need another working Windows PC to do this.
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and/Another-System-Restore-question/m-p/1945...
    If you call HP on the phone they can verify for sure if they have the recovery discs or not.
    If they do not, you can purchase them here
    http://www.computersurgeons.com/Default.aspx

  • W540, Windows 8: Unable to create recovery media

    Hello,
    today I received my new worklaptop, a W540 with Windows 8 installed.
    The first think I wanted to do was to create recovery media (I'm going to re-install on a SSD). However, trying to run the Windows 8 "Create recovery media" tool, as sugested by Lenovo, results in the following:
    The option "Copy the recovery partition ..." is grayed out, and I can not select it. Pressing Next results in the following:
    What am I doing wrong ?
    Thank you.
    Solved!
    Go to Solution.

    You should be able to order recovery media from support.  They usually charge for the media but in this case they may not.  I can't speak for them - you'll have call and see how it goes...
    Z.
    Finland
    THINK-branded products
    Finnish
    +358-800-1-4260+358-800-1-4260
    (Warranty service and support)
    8 AM - 5PM
    Monday - Friday
    IdeaPad and
    B, C, E, G, K, N, V, Y Series Notebooks
    Finnish
    +358-800-9-4439+358-800-9-4439
    9AM - 6PM
    Monday - Friday
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Folio 13-2000 unable to create recovery media due to known SSD corruption bug

    My folio has been freezing and periodically showing the 'no boot drive' message. I tracked it down to the critical Softpaq sp60976. I tried to create recovery media (USB flash drive), but it fails at about 19% completion and says it cannot continue. The SSD firmware update requires a secure wipe of the drive, but I won't have anything to put back on it.
    My computer is out of warranty by a year. Is there really no recovery media, even for purchase, from HP? I'll take DVD, as I can attach an external DVD drive. 
    This question was solved.
    View Solution.

    Phone your nearest HP Support  to order Recovery Media. Worldwide contact info can be accessed here>Contact HP
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Unable to create recovery disk

    I have Leovo G530 35U 3000 series laptop. When I tried to create recovery disk by clicking "Create Product Recovery media" , a new window for creation appear. But the check box for "product recovey disk you are going to creae are for this conmuer use only" and ok button get diactivated.
    Is there ny other option to create prouct recovery disk?
    Can anyone help me?

    Hi saksham_jain,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you tried to create your recovery DVDs using HP Media Creation and it failed. Here is  a document to assist you with creating the recovery DVDS. Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7). 
    If this should fail for any reason, please provide the error and any other details.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Re: Unable to create recovery media flash drives

    I recently purchased a new Toshiba netboo NB305-N440BL and upgraded to Windows 7 Home Premium. Using the "Create Recovery Media" wizard, as suggested, I attempted to create the recovery media on two flash drives. The flash drives were brand new and had never been formatted.
    When inserted the "wizard" program stated that the Flash drives needed to be formatted, but when I asked that they be formatted, the program said that there was an error and they could not be formatted. I then formatted the drives using Windows Explorer Disk Management, reinserted the drives and received the same "...needs to be formatted, but wouldn't format ..."message. I also received "error code 040E2D-00-00000000".
    I Googled this error message and found two others who had the same problem with their Toshiba net books when they attempted to create the back up material. There were no responses to their requests for help.Is there another approach to making the back ups?
    Thank you

    I finally gave up and returned the computer to tech service at Fry's where I bought it.They found that the OS did not recognize the flash drives at any of the USB ports, so they exchanged the computer for a new one ( I was still within the 15 days after purchase for a return) and the new computer works perfectly, Thanks for all the suggestions.

  • G60-535DX Notebook ~ Unable to create Recovery Discs

    I have a HP G60-535DX Notebook, running Windows 7 Home Premium, 64-bit, Service Pack 1.
    I have tried to create recovery discs by going to Recovery Manager and clicking on Recovery Disc Creation. When I get the screen that says Splitting System Image, it never goes beyond 9%, even when I let it run for over an hour.
    Any thoughts or suggestions?
    Thanks.

    Hello JimCon,
    I have read your post on how your notebook computer is not able to successfully create recovery disks, and I would be happy to help you!
    Since your computer gets stuck at 9% for great lengths of time, I recommend contacting our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    I hope this helps!
    Regards   
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • T61 - Unable to create recovery discs

    I'm trying to create a set of recovery discs for my Thinkpad T61, but when I run the Create Recovery Media software, the CD drive never shows up as an option to select as a recordable drive.  The dropdown list remains blank no matter what I do.  I have tried various types of media and nothing seems to show up for any of them.  Am I missing something, or is there something else that I need to try?

    what´s up, when you try to burn a disc with your sonic recording software?
    Is Sonic recognising your blank dvd?
    May your DVD drive is faulty?
    Greets
    Andreas
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Time Machine Failure - Unable to  create backup directory

    I've been using time machine for months with no problems. It seems like since I went to the 10.5.2 update I started having problems.
    Time machine fails and says a problem occurred creating a backup directory. I'm running an external drive formated to the MAC Extended Journeled. I also set my computer share name with no punctuation and no spaces.
    Today I got the failure and I ran repair disc in disk utility and it could not repair the disk. So I erased it, rebooted and reconfigured time machine.
    Started running the backup and about 30 minutes into it stopped with the same error.
    Any thing I can try?

    Seems I have same problem, I came here for the answer, only to find there appears to be none!
    I started off with a new 250Gb internal drive, 50 "Real" Gb to Boot Camp, rest to Mac. Re-installed from original Apple install disks to TIGER, then upgraded to LEOPARD with the Apple upgrade disk that came with the machine as an uninstalled upgrade. All firmware and software updates up to date.
    First tried a Maxtor 4+ ext 750Gb Firewire drive for Time machine, 400Gb to Time Machine, other partition for other stuff. Every backup failed with Time Machine, same as the unfortunate gentleman in the pages above. Super-Duper backup to that same drive/partition worked perfectly.
    So I bought a 250Gb 2.5" Western Digital drive, put it in a USB/Firewire case and tried that, but every time same problem. It would stall once 123.85Gb of 143.8Gb completed, and get no further. After a few days a reboot or forcequit was needed to stop the process, and on attempting to restart time machine later would only get to about 32kb and fail stating there was not enough space on the drive. (123Gb already backed up, only 19Gb to go, and 106Gb free on the backup drive)
    I have re-formatted (Standard Mac extended/journalled format) the drive several times now, and always same result. I have checked the drive, repaired it, and written it over with Zeroes after formatting even, still same resuly, exactly 123.85Gb into the backup it stops and goes no further. I have tried with both the firewire, and the USB plugged into the drive, same result. Time Machine does not even have the courtesy to report which file it got stuck on, so that I could manually delete it if that was the problem. Anyone found the answer to this yet?

  • Unable to create recovery media

    Starting the Option to Create the recovery media I only get an application crash in "rrmedia.exe". Is there any other way to create the recovery media? Or is it possible to simply reinstall something?

    ctron, welcome to the forum,
    it would be helpful if you could post which ThinkPad, Operating System and version of R&R you have installed. This will hopefully help members help you.
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Unable to create recovery media on a new T440

    Hello,
    I am new here. I have a brand new T440 which I am populating and customising.
    I created a new partition on the HDD using MiniTool Partition Wizzard. That may have created the problem - I can't create the recovery media. I get a message that the files are not there. I should have done it before partitioning - too late now.
    However, using the Partition Wizzard, I can assign a drive letter to the Recovery partition, and it becomes visible in Windows Explorer (File manager). I can copy the content on an external HD drive.
    If I ever need to do recovery - will it work from this? Has anybody tried this before?
    Solved!
    Go to Solution.

    jfranek wrote:
    I will try your suggestion and request it from Lenovo Support. Thanks.
    Were you able to obtain factory recovery media?
    Please let us know how things turned out.
    Cheers.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Unable to create recovery discs

    HP Pavilion DV9910US
    Windows Vista 32-bit
    When I try to go through the Recovery Manager program to create my recovery discs, I'm given the following error message:
    "Softthinks CD Creator has stopped working"
    It then informs me that Windows will find a solution and let me know if/when one is found.
    Sounds like I have a program that's fouled up, but not sure which one.  Never heard of this Softthinks CD Creator, only the Cyberlink DVD suite that came preinstalled.  Help?

    You can order recovery media here
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
    If HP no longer has Recovery Media for your model, order them here
    http://www.computersurgeons.com/Default.aspx

  • Unable to create recovery disks

    Hi,i just purchased a HP Probook 4320s and i would like to create a recovery disk set as soon as possible so if i need to go back to factory settings i can do,however when i followed the instructions to do so on this site it says go to start>all programs> recovery manager. But when i go to start>all programs there is no recovery manager to be found.I did a search for it and system restore comes up with the option to reformat to factory settings but no option to burn a set of recovery disks.Am i looking in the wrong place or could it be under a different heading? I have a Probook 4320s.please help.Thanks

    Hi,
    Please read the 1st post by Paul_Tikkanen in This Thread as I believe it also applies in your case.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Bluetooth dongle not working - no bluetooth module - x86_64

    Hi, today I have bought new bluetooth dongle (4World Accesories) and I have problem to make it work. I've read wiki, posts I could google but there is no solution that could help me with my problem. Here are some outputs: lsusb Bus 001 Device 020: ID

  • Distribution cost center details

    Hi In payroll while posting to FI the wagetypes will post to FI costcenter wise, if there is any distribution cost centers it will post through distribution % to FI Is there any table where we can get those details % distribution amount Please help T

  • How can I uninstall Garage Band extras?

    I installed the additional stuff that comes in the Installation DVD's but I don't think I need it. How can I get rid of all those extra files? Where are they located? Can I just delete them?

  • Help with JDO query

    I'm currently using Kodo 3.0.2, MySQL 4.0.17 and MySQL driver 3.0.10 I have written a JDO filter like this. Where all the criteria are properly grouped into parenthesis. However, the generated SQL statements removed/ignored the parenthesis. I may hav

  • Event IDs 508,509 and 510 (Health Service ESE Store) on SCOM agents

    Hi Team, Many of my SCOM agents are getting the Event IDs 508,509 and 510 on them. HealthService (2944) Health Service Store: A request to write to the file "C:\Program Files\System Center Operations Manager\Agent\Health Service State\Health Service