Install failure: WLE 5.1 on AIX 4.3.3

I get the following error when installing WLE 5.1 on AIX 4.3.3. Can
anyone please let me know how to resolve this. I need this ASAP as we
are in the middle of an installation.
Thanks,
0509-023 Symbol dlclose in /usr/local/wledir/lib/libgp.so is not defined
0509-022 Cannot load library libpif.so.
0509-026 System error: Cannot run a file that does not have a
valid form
at.
exec(): 0509-036 Cannot load program /usr/local/wledir/bin/epifreg
because of th
e following errors:
0509-023 Symbol dlsym in /usr/local/wledir/lib/libgp.so is not
defined.
0509-023 Symbol dlerror in /usr/local/wledir/lib/libgp.so is not
defined
0509-023 Symbol dlopen in /usr/local/wledir/lib/libgp.so is not
defined.
0509-023 Symbol dlclose in /usr/local/wledir/lib/libgp.so is not
defined
0509-022 Cannot load library libpif.so.
0509-026 System error: Cannot run a file that does not have a
valid form
at.
... finished
Changing file permissions...
... finished
Processing default license file...
Install tlisten password? [y/n]:
0509-023 Symbol dlclose in /usr/local/wledir/lib/libgp.so is not defined
0509-022 Cannot load library libpif.so.
0509-026 System error: Cannot run a file that does not have a
valid form
at.
exec(): 0509-036 Cannot load program /usr/local/wledir/bin/epifreg
because of th
e following errors:
0509-023 Symbol dlsym in /usr/local/wledir/lib/libgp.so is not
defined.
0509-023 Symbol dlerror in /usr/local/wledir/lib/libgp.so is not
defined
0509-023 Symbol dlopen in /usr/local/wledir/lib/libgp.so is not
defined.
0509-023 Symbol dlclose in /usr/local/wledir/lib/libgp.so is not
defined
0509-022 Cannot load library libpif.so.
0509-026 System error: Cannot run a file that does not have a
valid form
at.
... finished
Changing file permissions...
... finished
Processing default license file...
Install tlisten password? [y/n]:

Have you confirmed that your environment is defined correctly? Where did you install the upgrade? In /essbase/v61? That looks like where you would have installed version 6.1. Check all of your "PATH" variables - PATH, LD_LIBRARY_PATH, etc. I just did an upgrade from 6.1 to 6.5 on AIX 4.3.3. I ran into a couple of environment issues and problems with libraries that needed to be cleared out of the kernal to get java to load correctly. We initially weren't able to start apps either but did not get the messages you're getting. We shut essbase down, ran slibclean, started essbase back up and everything worked.Jerry Ursetti

Similar Messages

  • Net8 Config failure after installing Oracle 8.1.7 on AIX 4.3.3

    Failure on the installed step Net8 Configuration, the message on the Installed log "installAction.log" is :
    Starting to execute optional autolaunch configuration tools
    Launched configuration tool Net8 Configuration Assistant
    Command which is being spawned is /oracle/app/oracle/product/8.1.7/JRE/bin/jre -Duser.dir=/oracle/app/oracle/product/8.1.7/network/jlib -classpath /oracle/app/oracle/product/8.1.7/JRE/lib/i18n.jar:/oracle/app/oracle/product/8.1.7/JRE/lib/rt.jar:/oracle/app/oracle/product/8.1.7/jlib/ewt-3_3_6.jar:/oracle/app/oracle/product/8.1.7/jlib/netcfg.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netcam.jar:/oracle/app/oracle/product/8.1.7/network/jlib/netca.jar:/oracle/app/oracle/product/8.1.7/jlib/help-3_1_8.jar:/oracle/app/oracle/product/8.1.7/jlib/ice-4_06_6.jar:/oracle/app/oracle/product/8.1.7/jlib/share-1_0_8.jar:/oracle/app/oracle/product/8.1.7/jlib/swingall-1_1_1.jar:/oracle/app/oracle/product/8.1.7/network/tools:/oracle/app/oracle/product/8.1.7/jlib/opsclust.jar oracle.net.ca.NetCA /orahome /oracle/app/oracle/product/8.1.7 /instype custom /inscomp client,net8,javavm,server /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /oracle/app/oracle/product/8.1.7/network/install/netca_typ.rsp
    Configuration tool Net8 Configuration Assistant was canceled
    Result code for launching of configuration tool is -1
    Launched configuration tool Oracle Database Configuration Assistant
    Command which is being spawned is /oracle/app/oracle/product/8.1.7/bin/dbassist -responseFile NO_VALUE -createtype custom -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc /oracle/app/oracle/product/8.1.7/starterdb -sid orcl -orabase /oracle/app/oracle/product/8.1.7 -dbloc /oradata -clususer NO_VALUE -cluspswd *Protected value, not to be logged* -nodeinfo NO_VALUE -gdbName orcl
    Configuration tool Oracle Database Configuration Assistant failed
    Result code for launching of configuration tool is 1
    Error :*** Alert: One or more tools have failed. It is recommended but not required that these tools succeed for this installation. You can now select these tools, read its details to examine why they failed, fix those problems, and retry them. Or, you can click "Next" to continue. ***
    User selected: Yes/OK
    I start "Net8 Configuration Assistant" manually and get the following error meesage :
    $ netasst
    Error loading native library: libnjni8.so.
    java.lang.UnsatisfiedLinkError: jniGetOracleHome
    at
    at oracle.net.common.NetGetEnv.getOracleHome(Compiled Code)
    at oracle.net.asst.container.NetUtils.getImageDirectory(Compiled Code)
    at oracle.net.asst.container.NetApplication.init(Compiled Code)
    at oracle.sysman.emSDK.client.appContainer.WebApplication.main(Compiled
    Code)
    Can anybody tell me what is wrong with it?

    This is the same problem that we have encountered installing 8.1.7 clients on AIX 4.3.3 and 5.2. However I did successfully install it on one AIX 4.3.3 machine. Comparing the oracle logs there are no differences in the successful and unsuccessful installs until the point netasst hangs. All the machines are definitely set to run the 32 bit kernel.

  • Install failure on Korean AIX

    An i2 customer is installing Weblogic Server 8.1SP1 on AIX 5.1 (Korean) the silent
    install has errors that start with the following warning:
    WARN [readCachedArchiveInfo] com.bea.plateng.wizard.installer.silent.tasks.ReadCachedArchiveInfoTask
    - Unable to read archive.bea from /tmp/bea49512.tmp
    followed by:
    ERROR [stringSubst] com.bea.plateng.wizard.installer.utils.stringsubs.StringSubst
    - com.bea.plateng.wizard.installer.utils.InstallFileIOException: Error performing
    global string substitution on file /tmsad/bea/weblogic81/samples/server/examples/build/examplesWebApp/index.jsp.
    sun.io.MalformedInputException
    it has been suggested that this is because Weblogic Server 8.1SP1 does not support
    AIX 5.1 (Korean) - if that is the case I dont see that documented any where...
    so my question is this
    1) is the above error familiar to anyone
    2) if it is any hints on a problem resolution strategy ?

    Hi Adrian,
    Please follow this link to see list of supported platforms:
    http://e-docs.bea.com/wls/certifications/certs_810/overview.html
    If you still have questions about the failure below, let us know.
    regards,
    Platform team.
    BEA Systems
    "Adrian Bird" <[email protected]> wrote:
    >
    An i2 customer is installing Weblogic Server 8.1SP1 on AIX 5.1 (Korean)
    the silent
    install has errors that start with the following warning:
    WARN [readCachedArchiveInfo] com.bea.plateng.wizard.installer.silent.tasks.ReadCachedArchiveInfoTask
    - Unable to read archive.bea from /tmp/bea49512.tmp
    followed by:
    ERROR [stringSubst] com.bea.plateng.wizard.installer.utils.stringsubs.StringSubst
    - com.bea.plateng.wizard.installer.utils.InstallFileIOException: Error
    performing
    global string substitution on file /tmsad/bea/weblogic81/samples/server/examples/build/examplesWebApp/index.jsp.
    sun.io.MalformedInputException
    it has been suggested that this is because Weblogic Server 8.1SP1 does
    not support
    AIX 5.1 (Korean) - if that is the case I dont see that documented any
    where...
    so my question is this
    1) is the above error familiar to anyone
    2) if it is any hints on a problem resolution strategy ?

  • Remote Install Failure on AIA3.0

    Hi,
    Remote Install Failure on AIA 3.0:
    AIA 3.0 installations on Windows XP-Pro is failing in Step 4 of 11 with the Error
    "Node manager is down or the username and password entered is incorrect"
    Details on the installation are as follows:
    1) Installation is done on a Windows-XP 32 bit SP2, RAM - 4 GB.
    2) SOA Suite 11gR1 PS1 and Weblogic 10.3.2 successfully installed.
    3) SOA managed server, Admin server and node manager are running successfully on remote server.
    4) The status of Node manager is reachable and has been confirmed through the admin console.
    5) When installing AIA 3.0 use Remote Install option, the 4th step is failing after providing the node manager credentials of remote server.
    Error message is "Node manager is down or the username and password entered is incorrect".
    6) We given remote server configuration on 4th step (Host Name, Admin Port, Domain name, user/pass).
    7) The Remote WLS Server is reachable.
    8) Installer is always looking local node manager is not looking for Remote node manager which one is running on remote machine.
    Error Log
    Adding C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM for deletion.
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/soawl.jar
    Adding to classpath:file:/C:/WINNT/TEMP/OraInstall2010-04-29_04-25-49PM/ext/jlib/template.jar
    null
    configFileName:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml
    osName:Windows XP
    Inside startPreReqOperation...prereq
    osName:Windows XP
    diskSpaceRequirements from engine:Home id =SoftwareOnlyOraclehome name=Oracle home variable=%AIA_HOME_PATH% fixedSpace=2048 unit=MB condition=null totalSpaceRequired=0 isConditionSatisfiedfalse
    entryPoint: entryPoint = oracle.installType.all condition = null className = null
    contextFile:C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\prereq\oui\agent_prereq_context.xml
    The entry point is: oracle.installType.all
    Check Name:CertifiedVersions
    Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
    Expected result: One of 5.1,5.2,6.0,6.1
    Actual Result: 5.1
    Check complete. The overall result of this check is: Passed
    Check Name:ServicePackChecks
    Check Description:This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
    Expected result: 2
    Actual Result: 2
    Check complete. The overall result of this check is: Passed
    Check Name:TotalMemory
    Check Description:This is a prerequisite condition to test whether the system has sufficient physical memory.
    Expected result: 1024MB
    Actual Result: 3191MB
    Check complete. The overall result of this check is: Passed
    Property File location: D:\AIA3.1\New Folder\cd\Disk1\install\win32\aiaoneclick.properties
    Item State: javax.swing.JComboBox[,170,52,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=AIA3]
    Path: D:\Oracle11GPS\Oracle\Middleware_new\AIA3
    Item State: javax.swing.JComboBox[,170,81,262x18,invalid,layout=com.jgoodies.looks.plastic.PlasticComboBoxUI$PlasticComboBoxLayoutManager,alignmentX=0.0,alignmentY=0.0,border=,flags=4194632,maximumSize=,minimumSize=,preferredSize=,isEditable=true,lightWeightPopupEnabled=true,maximumRowCount=8,selectedItemReminder=D:\Oracle11GPS\Oracle\Middleware_new\AIA3]
    Home: AIA3
    In processFieldStringAIA Home
    In processFieldStringJAVA HOME
    In processFieldStringAIA Home Path
    In processFieldStringAIA Instance Name Contains invalid characters
    getting root directory
    D:\oracle11GPS\Middleware\user_projects\domains\dev_domain
    truevalue for type of install
    D:\Oracle11GPS\Oracle\Middleware_new\jdeveloper
    D:\Oracle11GPS\Oracle\Middleware_new
    *****Web Logic Home: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3
    CLASSPATH: D:\Oracle11GPS\Oracle\Middleware_new\wlserver_10.3\server\lib\weblogic.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adapters.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\adf-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\aqapi.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\bpelImport.log;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ccrQueries.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.comdev_6.1.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.cie.config_6.0.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.common.security.api_1.0.0.0_5-1-0-0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\com.bea.core.nodemanager.plugin_1.3.0.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\commonutils.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\connections.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\dms.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\encrypt.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\engine.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\enginehelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\footprint.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb.xjc_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\glassfish.jaxb_1.0.0.0_2-1-7.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest-tasks.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvest.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-10.3.1.0.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvester-ant.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\harvesterSettings.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\install.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\jython-modules.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log-config.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\log4fl.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\message.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdbc5.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl-log4j.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\ojdl2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\oneofftool.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\runant.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.bat;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\setenv.sh;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soainstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\soawl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\SysInfo.dll;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\template.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\tools11g.xml;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\types.properties;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlcipher.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wlfullclient.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\wtinstallhelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\ext\jlib\xmlparserv2.jar;;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstaller.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oneclick.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xmlparserv2.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\share.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraInstallerNet.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emocmutl.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\emCfg.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\OraPrereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jsch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ssh.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\remoteinterfaces.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\http_client.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatch.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchactions.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchprereq.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\OPatch\jlib\opatchutil.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstImages.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_de.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_es.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_fr.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_it.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ja.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_ko.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_pt_BR.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_CN.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\InstHelp_zh_TW.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\oracle_ice.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\help4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-swingaccess.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ewt3-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\swingaccess.jar;\;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\jewt4-nls.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-collation.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\orai18n-mapping.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\ojmisc.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\xml.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\srvm.jar;C:\WINNT\TEMP\OraInstall2010-04-29_04-25-49PM\oui\jlib\classes12.jar
    1
    localhost
    LocalMachine
    Connecting to Node Manager ...
    <Apr 29, 2010 4:31:11 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    Either the password and username entered are incorrect or the node manager is down
    Traceback (innermost last):
    File "<string>", line 1, in ?
    File "<iostream>", line 123, in nmConnect
    File "<iostream>", line 618, in raiseWLSTException
    WLSTException: Error occured while performing nmConnect : Cannot connect to Node Manager. : I/O error while reading domain directory
    Use dumpStack() to view the full stacktrace
    Anyone knows how to install AIA Remote Install on the remote SOA server?

    Hi,
    may be you enter the wrong username or password? Or there is a problem with certificate? The look file describe a wrong user name or password or nm is not reachable. Is it possible to start managed server via Admin Console? Please check nm log files.
    Regards,
    Marcel

  • How to change number of retries and delay before retrying after software install failure

    I deploy a software to client, but the installation is fail, so it will retry. but How to change the number of retries and delay before retrying after software install failure?
    I find "Retry Settings" in "Software Distribution Component Properties". But I think it work for Distribution, not the installation. am I right?

    First, are you referring to packages or applications because the behavior is different.
    Also, why do you want it to retry a failure? It failed for a reason so you need to fix the cause of the failure first. If it failed the first, it will likely fail the next time for the same reason. In general, ConfigMgr will only retry on transient type
    errors.
    Jason | http://blog.configmgrftw.com

  • Error while Installing NW701 EHP1 JAVA Only on AIX/DB2 UDB

    Hi All,
    While Installing NW701 EHP1 JAVA only on AIX/DB2 UDB platform I am getting below erron in Update Database Registry Step.
    Previously system was installed with DB29.1 patch level 7 whiach was wrong. Then I have uninstalled SAP and cleaned all the mounted directories related to SID. After that I stsrted again and getting below error.
    The step UpdateDB2Registry with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_UpdateDb2Registry|ind|ind|ind|ind|13|0|UpdateDB2Registry was executed with status ERROR .
    Imediate response would highly appreciated and rewarded.
    Best Regards
    Devendra

    Hi,
    Check file system characteristics, it should be created with read and write only. Please make sure that file system should not be created with cio option.
    Thanks
    Sunny

  • How to install Oracle Real Application Clusters on Aix

    I am running a 64 bit kernel AIX 5.2 on IBM RISC Based p-series sever(7028-6C4).Clustered has already been configured. How can i check the clustered has configured successfully (software & hardware) for oracle installation?
    What is the procedure to install oracle real application custer on AIX ?
    Can Any body Help me......
    Arif

    Here you have books related to that theme:
    http://otn.oracle.com/pls/db92/db92.docindex?remark=homepage
    Joel Pérez

  • Issue installing PI 7.1 EHP1 on AIX,Oracle

    Hi Friends,
    I am installing PI 7.1 EHP1 on AIX,Oracle.Iam facing some issue during installation(25th phase of installation).
    I have 10 Gb RAM and 20 Gb SWAP.
    Do you have any idea?
    sapinst.log:
    13.10.2009 11:02:22
    GetProcessList
    FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()
    INFO 2009-10-13 11:02:22.229
    Connect to message server (s0001079/3901) succeeded.
    INFO 2009-10-13 11:02:22.229
    Disconnect from message server (s0001079/3901) succeeded.
    WARNING[E] 2009-10-13 11:02:22.240
    CJS-30087  Instance XDN/SCS01 [PARTIAL] did not stop after 2:00 minutes. Giving up.
    ERROR 2009-10-13 11:02:23.421
    FCO-00011  The step stopInstance with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_Instance|ind|ind|ind|ind|1|0|stopInstance was executed with status ERROR .
    WARNING 2009-10-13 11:02:23.576
    Could not get property IDs of the JavaScript object.
    ERROR 2009-10-13 11:02:23.577
    FJS-00010  Could not get value for property .

    Hi Milos,
    The problem is with the starting of the SCS instance by sapinst, on AIX the port that we used (SAP default) 3901 during the input step for SCS was in usage at AIX by some application
    nimsh 3901/tcp # NIM Service Handler
    nimsh 3901/udp # NIM Service Handler
    I had to free up the port for some time, stop processes running on the port and then continued with my installation. After the installation was complete, I changed the port number of SCS to 3601 and gave the port back to AIX application.
    Beaware that you have to change the port number is various places, including Config tool, all the JSPM, Configtool properties
    Check if this helps to resolve your problem, else I will have to recollect if I resolved it differently.
    Regards,
    Nilesh

  • Installing 10.2.0.4 on AIX 6L with GPFS

    Can anyone help me in Installing 10.2.0.4 on AIX 6L with GPFS?
    Suggestions are appreciated.
    Thanks,
    Ravikanth

    Srini Chavali wrote:
    Pl elaborate on what you mean by GPFS
    Is there a reason you want to install a de-supported version ?
    Pl see the Install Docs -
    http://docs.oracle.com/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC
    http://docs.oracle.com/cd/B19306_01/install.102/b19075/toc.htm
    and this MOS Doc
    Oracle Database (RDBMS) on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    HTH
    SriniLooks like it is a new (?) file system IBM makes available on AIX. I googled "gpf" and this was my first hit. General Parallel File System.

  • Error installing BOBJ 3.1 SP2 on AIX

    Hi,
    Has anyone tried installing BOE 3.1 SP2 on AIX successfully?
    I get an error..
    [error] Errcode 1: gzip -dc "/temp_cds3/PATCHES_DOWNLOADED/BOBJ_ENT_SP2/pkg/jdk00000.tar.gz" | /bin/tar xvfb - 1
    I checked the pkg directory and can't find the file jdk00000.tar.gz... is there something missing from the file sets?
    Thanks
    Jacques

    Hi,
    I stand corrected... the jdk00000.tar.gz file is there, but the error still occurs.
    Any one?
    Thanks
    Jacques

  • Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7

    Photoshop Elements 10 Mac Ongoing Install Failure - Exit Code 7
    I downloaded Photoshop Elements 10 for Mac (not trial, with valid serial #)
    Mac OSX 10.7.2, 3.6 GHz Intel Core i5, 16 GB RAM
    I know the install package is valid because I installed it on my backup laptop (same Max OSX version) after I was having problems with my primary desktop and it installed fine. I have followed all the instructions on the install package including "restarting my system and installing again," and the install keeps failing with the same message:
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 18 error(s), 3 warning(s)
    WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {75063C76-E858-455B-9C26-89E55D26F276} AdobeHelp 3.2.0.0 is already installed and the session payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} AdobeHelp 3.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    ----------- Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0 -----------
    ERROR: DF024: Unable to preserve original file at "/Library/Fonts/BickhamScriptPro-Regular.otf" Error 0(Seq 1519)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 1519)
    ERROR: DF023: Unable to delete file "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents/Info.plist". Error 0(Seq 2)
    ERROR: DW063: Error rolling back command ARKCopyFileCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app/Contents"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files/Adobe Photoshop Elements Editor.app"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10/Support Files"(Seq 2)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 2)
    ERROR: DF015: Unable to delete symlink "/Applications/Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCopySymlinkCommand(Seq 1)
    ERROR: DF001: Unable to get permissions of "/Applications/Adobe Photoshop Elements 10"(Seq 1)
    ERROR: DW063: Error rolling back command ARKCreateDirectoryCommand(Seq 1)
    WARNING: DW036: Payload cannot be installed due to dependent operation failure
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop Elements 10: Failed due to Language Pack installation failure
    ERROR: DW050:  - Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: Install failed
    Suggestions? thanks.

    Issue resolved with the help of Adobe Support (Mercer).  My problem had been seen in another machine, there were empty folders in the Fonts Folder (Hard Drive>Library>Fonts) that the installer could not reconcile or delete, that was hanging up the Installer.
    My fix was to delete the following empty folders from the Fonts Folder:
    AdobeMingStd-Light.otf
    BickhamScriptPro-Regular.otf
    KozMinPro-Regular.otf
    MyriadPro-BoldCond.otf
    TektonPro-BoldCond.otf
    And then re-run the installer (be sure to empty the trash).
    My advice would be to first read the installer log and look for names of font folders that could not be resolved, then dump those.  Another way would be to dump any empty folders in the Fonts Folder, empty the trash, then re-sun the installer.

  • ZCM Reporting install failure: Wrong OS

    Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

    I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
    It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
    Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
    This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
    Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
    Tim Wessels
    Originally Posted by Craig Wilson
    At this point in time, BOE is only supported on a 32-Bit OS.
    Novell is working with Business Objects to get support for 64-Bit Platforms.
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.
    "deban0" <[email protected]> wrote in message
    news:[email protected]...
    >
    > Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
    > server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
    > 10.1.1 x64. But I got the install message: Not supported OS. Is it true
    > ?
    >
    >
    > --
    > deban0
    > ------------------------------------------------------------------------
    > deban0's Profile: NOVELL FORUMS - View Profile: deban0
    > View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
    >

  • 11g Install Failure, Listener Error.

    11g Install Failure, Listener.
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    I am attempting to install 11g, 11.1.0 onto a stand alone box which has Windows XP SP2 as the OS.
    The box is at present not networked and as is not on a domain. The computer name is homedb.
    I have installed the loopback adapter on 10.10.10.10 and updated my hosts file, the computer can resolve this to the computer name and vice versa.
    Upon installing 11g and the starter database, the install continues normally, succeeding with the Oracle Net Configuration Assistant. However when the Oracle Database Configuration Assistant is run, 89% of the way through an error is thrown as follows:
    Enterprise manager configuration failed due to the following error -
    Listener is not up. Start the listener and run EM configuration again.
    Refer to the log file at C:\Oracle\cfgtoollogs\dbca\emConfig. Log for more details.
    You can retry configuring this database with Enterprise Manager later by manually running C:\Oracle\product\11.1.0\db_1\bin\emca script.
    When I click ok on the error message the install completes as normal.
    I can TNSPING orcl which results in the following:
    TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2
    008 12:36:33
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Used parameter files:
    C:\oracle\product\11.1.0\db_1\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(
    PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))
    OK (20 msec)
    I can connect to the database using sqlplus sys/password as sysdba but when I try to connect using
    sqlplus sys@orcl and typing in the password I get the following error:
    ERROR:
    ORA-12514: TNS:listener does not currently know of service requested in connect
    descriptor.
    This is also the error I get when using sql developer to connect to the db.
    The extract from the log file mentioned above is as follows:
    20-Jan-2008 12:14:09 oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: SQLEngine created successfully and connected
    20-Jan-2008 12:14:09 oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1530)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1771)
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2708)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up. Start the Listener and run EM Configuration Assistant again .
    Refer to the log file at C:\oracle\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up. Start the Listener and run EM Configuration Assistant again .
         at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:2715)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:368)
         at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:147)
         at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:222)
         at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
         at java.lang.Thread.run(Thread.java:595)
    20-Jan-2008 12:14:09 oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\oracle\product\11.1.0\db_1\oui
    My listener, tnsnames and sqlnet are as follows:
    listener.ora:
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    sqlnet.ora:
    SQLNET.AUTHENTICATION_SERVICES= (NTS)
    NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
    tnsnames.ora:
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = homedb)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    When logged into the database a SHOW PARAMETER SERVICE results in a service of orcl
    Running the command: lsnrctl service, results in the following:
    LSNRCTL for 32-bit Windows: Version 11.1.0.6.0 - Production on 20-JAN-2008 12:46
    :52
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    The listener supports no services
    The command completed successfully.
    Running lsnrctl status results in the following:
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Produ
    ction
    Start Date 20-JAN-2008 12:09:10
    Uptime 0 days 0 hr. 40 min. 9 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\oracle\product\11.1.0\db_1\network\admin\listener.o
    ra
    Listener Log File c:\oracle\diag\tnslsnr\homedb\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=homedb)(PORT=1521)))
    The listener supports no services
    The command completed successfully
    I have re run the db configuration again but it would not start because apparently there was no listener, running the Net Configuration Assistant makes no difference.
    All firewalls and anti virus software have been disabled for the purposes of this install.
    Do I need to manually register the listener with the database, if so how do I go about doing this?
    I have installed 10g on a standalone box before with no trouble, what have I missed here?, any help greatly appreciated.

    To answer my own question I fixed this by issuing the command
    netsh winsocks reset
    Winsocks deals with windows networking and can become corrupt through installs of software, virus cleaning, etc.
    Hope that helps,
    Adam

  • Premiere Elements 10 install failure on Mac osx 10

    I have a copy of Adobe Premiere Elements 10, the five disk set, and keep having the same failure trying to install it on my Mac. I have gone through all the product requirements and made sure that my computer satisfies them, but I still find an install failure at 51%, Exit code 7, each time.
    What can I do?

    I had the exact same problem installing Premiere Elements 10 on a Mac from DVD.  Exit code 7 when it reached 51% installation.  I followed the link to "updated installation instructions" provided in this forum by Adobe Employee Jeff Wright.  It works.
    The instructions in a nutshell:  DON'T USE THE DVD.  Instead, download a trial version.  When you install use the serial number provided with your DVD.
    I find this to be extremely aggravating.  I spent a lot of time trying using the Adobe Support Advisor application trying to sort through the error codes.  Then I spent time trying to get through to Adobe Support (never did get through).  Finally I tried the forum and found the answer here.
    I find Adobe to be grossly inadequate in two ways.  First, they put out a product that just wasn't tested.  The DVD won't install on a Mac.  It is as if they did not test their product.  Second, their support is awful.  This is a known problem with a known solution.  When the fault occurs, the Adobe Support Advisor application should point the customer to the "updated installation instructions".  Instead it points to faults that are unrelated so the customer is led on a wild goose chase.
    I hope the product will be better than my experience so far.

  • Photoshop CS5 Install failure, but on just one instance of SL (the one I

    HI, I know this is a strange place to post this, but Adobe Support suggests talking to Apple, as I have an install failure of Photoshop CS5, the install app won't even initialize, and it's just on one instance of SL. I can install fine on other machines, and other bootable drives, but not on the one inside an imac (late 2008 vintage). Baffling, as the problem must be tied to this one instance...my production one. I tried other users on the machine, but no luck...same problem. I checked permissions, ran Disk Warrior, all of that, still no luck. Anyone have any other suggestions besides using Gimp:) thx,
    coocoo

    I can see what's going on with the installer... first it's supposed to create a temp application dir in the user account, Adobe/OOBE/blabla... then kick off the activation and then the installer. Before it get's to the activation part, it blows and deletes the dir it started. As I successfully can install on another boot drive, I tried to cobble together the installation that way, by just copying files over, and got there - pretty much. I just can't activate with my serial number as I am supposed to be able to do...probably intentionally made so - but PS is running in trial mode on my production machine, and full mode on a test machine - ha! If I could just reverse the situation I would be golden. Anyway, I have another call in to Adobe...

Maybe you are looking for