Install FC Studio 1 before installing FC Studio 2?

Hello,
I just installed Leopard on a different start up disc so must I install Final Cut Studio 1 before installing Final Cut Studio 2? Also, I would like to transfer ilife '07 to Leopard. How would I do this with this set up?
Thanks,
Jordan

1. Not if you have a full retail package, and if you have an upgrade, you will probably only need the serial number.
2. Use your computer's original disks or iLife installation disk to install it, and then run all applicable updates listed in the Software Update pane of System Preferences.
(29239)

Similar Messages

Do I need to uninstall pinnacle studio before installing adobe premiere elements 12

I'm thinking of changing from Pinnacle Studio and switch to adobe premiere elements 12, but want to try adobe. Do I have to uninstall Pinnacle, or can both programs exist together?

you do not need to uninstall pinnacle studio before installing premiere elements.

"Please install iLife '08 before installing iMovie HD 6"

Quite awhile ago(A couple of months) I experienced hard drive troubles and had to go to the Apple store to get a new one. I had iLife '08 on there before I got a new had drive, and iMovie 6 worked fine. But now when I try to reinstall iMovie 6, it gives me the message "Please install iLife ’08 before installing iMovie HD 6"
Is there a way to redownload iLife?

Do you still have the OS disks that came with your Mac? If it originally came with iLife 08, they are on one of the disks.

I installed windows 8 before installing Boot Camp 5(currently have 4) with 32 bit version win 8. Anything I can do now to upgrade to Boot Camp 5?. .

I installed Windows 8-32 bit before installing Boot Camp 5 (currently have 4). Is there anything I can do now to install Boot Camp 5 then re-install Windows with the 64 bit version?
I am hoping that I do not need to delete the partition and start all over.

Boot Camp 5 drivers can only be installed in 64-bit Windows 7 and 8 versions, so first you have to install a 64-bit Windows 8 version.
Note that Microsoft doesn't support upgrades from a 32-bit Windows to a 64-bit version, so you have to do a clean install, losing your applications, but you can keep your data, stored in "Windows.old", a folder at the root level of your Windows volume. Insert your Windows 8 DVD, hold the C key while your computer is starting and install Windows in the Windows partition.
After installing Windows 8, install the Windows support software for 64-bit Windows 7 and 8 versions

Visio and Project 2013 silent install returns immediately (before install is finished)

Hi,
I am building a task sequence that will include Office 2010 ProPlus (volume license), a bunch of other products (like SQL Server and Visual Studio) and also Visio 2013 and Project 2013.
For Visio 2013 and Project 2013, I have to use the retail media (this is for use in academic computer labs and we have a single retail key through DreamSpark Premium that allows unlimited activations - I don't know why DreamSpark doesn't just give a volume
license key).
I managed to get Visio 2013 and Project 2013 to install silently by modifying the config.xml file and using the /config parameter. However, when running my install script (the usual VBScript wrapper) or just from the command line, the command returns before
setup finishes (literally within less than a second). Setup continues to run and finishes successfully, but as you can imagine, MDT considers that application install finished and tries to move on to the next application which fails because another installation
is still in progress.
I've included below the relevant portion of the VBScript wrapper. Any help in figuring out how to get the wrapper to wait for the installer to finish is appreciated.
sSetupFile = oUtility.ScriptDir & "\Source\setup.exe"
sArguments = "/config vispror.ww\config.xml"
oLogging.CreateEntry oUtility.ScriptName & ": Starting installation", LogTypeInfo
// Check for existence of setup file omitted
iRetVal = oUtility.RunWithHeartbeat("""" & sSetupFile & """ " & sArguments)
Coincidentally, iRetVal = 0 indicating success.
Thanks,
SA

Hi SA,
Obviously you use the VBS wrapper for some reason. To my understanding this behaviour needs to be captured and translated to "script is till busy, when installation completes script is finished, proceed to next step".
I can only advise you to either try the command line directly in MDT, instead of using the VBS wrapper, and/or try to create an MSP and try this in your VBS wrapper, command line directly in MDT.
MSP files are easily created by going into command prompt to the sources folder of Visio / Project and execute the following command: setup.exe /admin this will start the Office Customization Tool which enables you to create an MSP file.
When you are ready, execute the following command to install the application with the settings in the MSP: setup.exe /adminfile custom.msp
Again I can imagine the purpose of the VBS just as I can imagine the purpose of using the config.xml above a custom.msp. But for starters this should get you going to try to find an resolve where the issue lies. In the VBS or somewhere else.
Cheers!
If this post is helpful please click "Mark for answer", thanks! Kind regards

Install BI CONT before install language in NW

Hi all!
I intall BI Content 704 in my NW system.
Then i install Russian language in NW.
So i cannot see name BI Content's objects in russian, only tech name.
If I upgrade BI COnetent to 705 i can see russian name ?
Thanks!

877049 Subsequent language installation for BI_CONT
195442 Language import and Support Packages

Message: PLEASE INSTALL iLIFE 08 BEFORE INSTALLING iMOVIE HD 6 ... huh?

My two year old Macbook's hard drive completely croaked two months ago and I got a brand new one installed under my warranty. Now I have OS X 10.4.11. It came loaded with iPhoto 08, iMovie 08, iDVD 08, GarageBand, and iWeb 08... so I assume that means I have iLife 08.
Well on iMovie 08 I can't work on any of my movie projects I had backed up. I tried to install iMovie 6 that I downloaded but can't install it: the message says to install iLife 08 first. Any ideas? When I got my Macbook out of the Apple shop with it's shiny new hard drive I got no disks whatsoever.
And, may I just say a heartfelt THANK YOU, THANK YOU to Apple for pushing us a giant step backwards with your iMovie 08 dud. Thanks, Apple!

it solidly refuses to recognize my iLife 08 suite.
You mean with regard to installing iLife HD 06?
Which I assume you are downloading here:
http://support.apple.com/downloads/iMovieHD6
Do you still have the disks that came with the computer originally? It might be worth trying to reinstall iMovie HD 6 that way because it's not going to care if iMovie '08 is present or not.
Matt

If I should install netweaver firstly before install ecc6??

I do not know the relationship between ecc6 and netweaver7.
If I want to install ecc6, is that means I should install netweaver7 firstly.
can you give me your advices. thanks a lot.

then after I install ecc6 only, which parts are netweaver7, and which parts are ecc6?? In my ecc6 system, netweaver7 contains what??
if you see in a ECC6, you will find no of addon components like EA-* extension sets, SAP_APPL components .. they are ECC functionality. SAP_ABA, SAP_BASIS, SAP_BW are the part of WebApplication Server which provides the runtime environment..
But if you see in a BW system, which is also based on netweaver, you will find SAP_ABA, SAP_BASIS, SAP_BW which are the application components of netweaver. it wont have SAP_APPL as BW system doesn't have the functionality of ECC. simple!
Regards,
Debasis.

Bootcamp Question? Should I update bootcamp before installing Vista SP1

Hi,
I am about to install Vista SP1 on iMac, Leopard 10.5.4.
About a month back, there was a bootcamp update that had been posted on support download website. The question is; Do I need to install the Update before installing Vista or is that needs to be done after the installation of Vista?
Thanks for the help,

The update is consists only of new device drivers for Windows XP and Vista. There are different updates depending upon whether you install 32-bit XP, 32-bit Vista, or 64-bit Vista. So Windows must be installed first, the original drivers included on the Leopard DVD should be installed, then you can install the update in Windows.

I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version?

I have an academic version of Final Cut Studio on my laptop and recently purchased the most recent Full version of Final Cut Studio. Do I need to uninstall the academic version before installing the new version? I ask because this is not an upgrade, but a completely new version.

I'm with Jim on this. It always seems to work out better if you do not install over another version. You can use this app (freeware - thanks to Jon Chappel) to completely remove ALL Final Cut Studio apps and components: http://www.digitalrebellion.com/fcsremover/
Once that's done, install your newly purchased version.
-DH

I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

I am using a macpro 12 core computer
I have been using final cut express for years and now want to switch to final cut studio 3. do I have to remove final cut express before installing final cut studio 3 or can I have them both installed at the same time on one computer?

You can have them both on the same computer as I and many others have done for years.
Just go ahead and install FCS 3 normally.
There will be absolutely no problems.

Please install Visual Studio 2005 before install Acrobat 9 Plugin Wizard

Hi,
I have Visual C++ 2005 Express Edition installed on my computer. I keep get error message said "Please install Visual Studio 2005 before install Acrobat 9 Plugin Wizard" when I installed Visual Studio App Wizard Acro9PIWizInstaller.msi.
Any idea?
Thanks,
Thai

Lol
Do you take me as a joker ?
*Of course I have contacted the micorsoft support first !*
*They ask me to try to install the .net framework 3.5, to see if the setup wasn't define as XP compatible.*
*Then they don't have answer yet and asked me to contact Toshiba support (funny no ?)*
Also If you look at the microsoft support forum the only installation pbm with Visual Studio with Vista is toshiba laptop satelitte related
Ok now, as it's my job, here is what I think :
Maybe the laptop was first setup with XP and maybe Tshiba reseler did install Vista on it as a migration !
First case
So to be absolutly sure it wasn't the case I did a format of my HDD and reinstalled vista from the Toshiba Crash and recovery CD
Second case
The problem remain, so it is possible that this Recovery CD and/or any other Toshiba product create this problem !!!!
Note that the C# or J# express just work fine, it's only the Visual Studio 2008 tem suite and pro

Installing and Using Logic Studio and Final Cut Studio 2 On the Same iMac

In March of this year, I switched from being a long-time user of PC's to a 24 in. 2.4 GHZ iMac. In late May I purchased Final Cut Studio 2 and Aperture and have greatly enjoyed using both of these applications on my iMac. Both run with no problems under Leopard which I installed shortly after it came out. I am now considering the purchase of Logic Studio since I have enjoyed midi sequencing and audio editing for years on my PC's but wish now to do this on my iMac.
I note that two of the applications included in Logic Studio (Soundtrack Pro 2 and Compressor 3) are a part of the Final Cut Studio 2 suite of programs that I already have installed on my iMac. How will Logic Studio handle this issue when I run the install of that software, i.e. will it be aware that I already have Soundtrack Pro 2 and Compressor 3 and just have those install options grayed out or will it overwrite my FCS2 installation of those two applications? Are there other issues or conflicts between Aperture or Final Cut Studio 2 applications and Logic Studio that I should know before installing Logic Studio?
Thank you very much in advance for responding, and I look forward to reading this forum from this point onward.
Tom

Thanks again for your prompt responses, blayzay. I look forward to getting and installing Logic Studio. If anyone has any precautions on using it with FCS2 or with Leopard, please add a comment to this thread.
Tom

MacBook Pro will not load Final Cut Studio 2 Install disc?!

So, this is the first time in all my years as a Mac user that I haven't been able to find info online about a problem I'm having with my machine.
Firstly, I've never had optical drive issues. Secondly, all other disks I try are still loading and playing perfectly (including other disks in the FCS2 box, e.g. the tutorials).
BUT when I insert the Final Cut Studio 2 Install disc, the drive sounds like it's trying to load the disc over and over, but it never gets spinning properly. The disc doesn't appear in my finder and after about 30 seconds my MacBook just spits it back out.
I've restarted, I've closed all other apps etc. but nothing helps.
Also, this same disc works fine in my parents' 17" MacBook Pro...
Please someone tell me what the **** is going on
Message was edited by: JesseMcC

You have probably already done it but ensure you have updated the OS and Quicktime prior to attempting to instal Final Cut Studio.
I recently had a hard drive crash and after installing the new hard drive it would not read the OS installation disc. I ended up using an external drive case and installed the OS on the drive from a different Mac Book, then reinstalled the hard drive in the other Mac Book. Then it booted right up. I updated all the original software before attempting to install any additional software.
Everyone kept saying it wouldn't install due a possibly defective optical drive and I can't say why but it wasn't the drive. As soon as I had the system up and running again the optical drive functioned flawlessly.
I hope this helps you.

License file for studio trial install

I just installed Studio (twice) for the 1st time and when I launch the app (from Windows) I see a dialog that says, "The existing license is invalid or expired" and a button to "Import License".
I used to have WLS 8.1 from 2005 but deleted that directory before installing. Any ideas why I'm being prompted for a license file?
Edited by bedfordd at 10/04/2007 9:25 AM

The eval license is generated by the installer. It is placed in the
bea.home directory (usually C:\bea in Windows). All products share the
same license file (licenses are merged in a single license.bea file, it's
an XML file).
See if you can locate it, if not, try re-installing.
On Tue, 02 Oct 2007 17:20:52 -0300, Don Bedford wrote:
I just installed Studio (twice) for the 1st time and when I launch the
app (from Windows) I see a dialog that says, "The existing license is
invalid or expired" and a button to "Import License".
I used to have WLS 8.1 from 2005 but deleted that directory before
installing. Any ideas why I'm being prompted for a license file?--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Install FC Studio 1 before installing FC Studio 2?

Similar Messages

Maybe you are looking for