Install FCP studio to external drive

I want to install FCP studio to my macbook pro and install all supporting media to an external drive so i don't waste space. has anybody done that.
thanks
macbook pro   Mac OS X (10.4.9)  

As Jerry notes, templates can be installed on a non-system disk.
Pay close attention during the install process when you are given Options. A number of people have clicked through those moments without paying much attention and placed all there support files on the system disk - much to their dismay.
good luck.
x

Similar Messages

  • Instructions: How To Install Logic Studio on External Drive

    Sorry for starting another thread, but this will turn up in a search engine inquiry better than the other thread, so please delete the other one instead. I believe the subject heading wording will be more search engine friendly
    Okay after much digging , I have found out what parts of Logic Studio 9 can & cannot be installed on an external Drive and here's how I did it:
    http://www2.picturepush.com/photo/a/4177710/img/Anonymous/Picture-1.png
    http://www5.picturepush.com/photo/a/4177713/img/Anonymous/Picture-2.png
    Then after everything is installed:
    Library>Application Support>Logic>EXS Factory Samples
    Dragged to the Ext. HD got 3 gigs out of it
    Then Library>Application Support>GarageBand>Instrument Library>Sampler>Sampler Files (NOT SAMPLER INSTRUMENTS !)
    That scored me another 12GB
    Installing that way allows approx 38GB of Logic on an Ext. HD
    Message was edited by: Geoff J

    If you want, you can install your OS on the external drive and boot up from that by setting the external drive as startup in the system preferences. Then you can install ALL of logic on it instead of using the internal at all. I've been set up this way for years.

  • Install Leopard on an External Drive on a Snow Leopard Mac Book Pro

    Hi
    I have a MBP 17/CTO 2.66GHz i7, which came installed with Snow Leopard.
    I've used boot camp to install Windows 7.
    I've attempted to install Leopard 10.5.4 on an external drive.
    The steps I've taken:
    1 - Connected my WD Passport on the Firewire Port
    2 - Partitioned the drive. The first partition is 100GB, Mac OS/X Extended (journal) and I've selected the GUID Partition Scheme
    3 - Inserted the Mac OS/X Leopard DVD, and followed the instructions to restart
    4 - On restart I have three options. Mac OS, Windows and Install Mac OS\X
    5 - I select Install Mac OS\X.
    6 - The disc spins for a few moments and then the laptop freezes
    Beware of the following issue:
    1 - On restart more often than not, the DISC will spin and then the laptop will freeze.
    2 - To overcome this, restarting pressing the ALT (option) Key.
    3 - You should see your boot options. If you do not see "Install Mac OS\X", then eject and reinsert the disc.
    The question maybe why would I want to have an Leopard Installation when I have Snow Leopard. The software I develop has thrown up a number of differences between Leopard and Snow Leopard, hence I need both OS's to support my software.
    I mentioned this to the Apple Store before I purchased my machine. They put me through to a senior technician at Apple Care, who told me it would be possible to have the set up I am after; and to contact Apple Care if I ran into any difficulties.
    After I received my laptop and ran into the problems I described above I contacted Apple Care, only to be told by a senior technician that it should be possible to install Leopard on an external drive, but Apple Care cannot provide any support or assistance.
    I really do like the laptop and would much rather not return the laptop; but I really do need the setup described.
    Anyway I have tried a number of different approaches:
    1 - Having no partitions (so just the single partition)
    2 - Trying all three Partition Schemes:
    - GUILD Partition Table
    - Apple Partition Map
    - Master Boot Record
    All resulting in the same problem.
    I can confirm the external drive does appear as bootable in disc info.
    My guess is one of the following is preventing the install:
    1 - It is simply not possible to install an earlier version of Mac OS\X than 10.6 on the laptop I have, even if I tried to install on an external drive. This restriction is built into some hardware confirguration. So even if I wiped the internal hard drive or added a new partition to the internal hard drive, I would not be able to install 10.5.4. I say this may be a reason as the second technician told me the CPU has built into it a process which prevents installing older versions of Mac OS/X, but that it should NOT restrict installation on an external harddrive.
    2 - When trying to install Mac OS/X, a search is carried out for an external drive which has the correct format. For some reason it may be that this search is not finding my external drive?
    I'm a little stuck here and quite disapointed that the support promised by Apple Care for assistance in setting this up, is now not forth coming.
    Any help or suggestions would be appreciated, as ideally I would prefer to keep and not return the laptop, it's a beautiful piece of machinery.
    Cheers
    Parmy

    The mystery continues...
    I have an older MBP (2.33 GHz Intel Core Duo) which came installed with Tiger. I can confirm I purchased a genuine copy of Leopard (10.5.4) from the Apple Store and it’s not an OEM version. I installed 10.5.4 without a hitch on my old MBP internal drive. It is the only OS installed on my old MBP.
    Using my older MBP (which through software updates is now running 10.5.7), I managed to install 10.5.4 onto my external HD (WD My Passport Studio – 640GB FireWire 800).
    However; on the final restart, the screen remained grey and 10.5.4 did not boot from the external drive.
    I restarted the machine holding down the ALT (option) key, and only two options appeared, Macintosh HD and the Install DVD. I selected the Macintosh HD and opened System Preferences.
    In System Preferences --> Startup Disk, I discovered the partition on my external HD which contains 10.5.4. I selected this partition and selected restart.
    On restart my MBP displayed a grey screen, and the blue light on my hard drive flashed slowly. I left this for an hour, however; the OS did not start and the screen remained grey.
    I then plugged my external HD into my new MBP which I started holding down the ALT key.
    To my surprise I found 3 boot options (Macintosh HD, Windows and Leopard). Leopard being the partition on my external drive, which now has 10.5.4 installed.
    I selected Leopard, but sadly after 30 minutes, the OS failed to boot.
    Although this deviates slightly from this post, I fail to understand the problem here:
    1 – Why can’t I boot 10.5.4 on an external drive, from my old MBP? Surely this is not because my old MBP is now running 10.5.7?
    2 – Why can I see 10.5.4 as a boot option on my new MBP but not on my old MBP when I start the MBP holding down the ALT key?
    I doubt there is a problem with my external drive, as it seems to read, write, etc... in all normal cases.
    Whilst it definitely appears that I won’t be able to boot 10.5.4 on an external drive from my new MBP, I should be able to at least boot it from my old MBP, which would give me the option of installing Snow Leopard and Windows on the internal drive of my old MBP.
    Apologies for keeping this post going, but I hope by getting to the bottom of this, it will help other Mac users as well.
    I’ve run out of ideas of things to try, so I will give Apple Care another call in the morning, and will report back.
    Any suggestions of other things I can try?
    Cheers

  • Can I install Leopard on an external drive to run my computer?

    Since it seems my hard drive has totally bit the dust, can I install Leopard on the external drive I use for Time Machine, and run my desktop from that drive? Could I run it from an external drive totally dedicated to Leopard? I am buying a new desktop soon, but I need info off of this machine. Can I plug in my Time Machine drive to my laptop and be able to use it without losing data?

    Elizabeth Salcido wrote:
    Thanks so much.
    Youa re welcome!
    I figured I would have to use a second drive. At least when I get my new desktop I will have a drive for Time Machine for both desktop and laptop.
    If you really plan to keep the laptop around after you get your desktop, I would recommend replacing its internal hard drive. While running your laptop off an external is possible, it should be considered a stopgap measure. i wouldn't do it on a permanent basis. For one, as you'll find out, it's quite a bit slower than when using the internal drive.

  • Can I install Linux on an external drive?

    I'm kinda curious about something. If I boot up off an external firewire drive at boot time and I have previously partitioned it into 2 partitions (techtool or iPartition) is it possible to install a Intel Linux distro on the 2nd partitition?
    When I go to boot from that external drive will the Linux installed boot loader allow me to select OSX or Linux to actually boot from?
    Even better can I just install Linux on this external drive in the only partition?
    I'm only looking to experiment with a Linux distro and I don't want to use Parallels anymore so I'm wondering if I can use an external drive to do so.
    TIA,
    Peter

    I'm kinda curious about something. If I boot up off
    an external firewire drive at boot time and I have
    previously partitioned it into 2 partitions (techtool
    or iPartition) is it possible to install a Intel
    Linux distro on the 2nd partitition?
    When I go to boot from that external drive will the
    Linux installed boot loader allow me to select OSX or
    Linux to actually boot from?
    Even better can I just install Linux on this external
    drive in the only partition?
    I'm only looking to experiment with a Linux distro
    and I don't want to use Parallels anymore so I'm
    wondering if I can use an external drive to do so.
    TIA,
    Peter
    Here is an indirect answer. I know you can using Paralles, not sure about the other way though.
    http://www.parallels.com/

  • Can I install os9 on an external drive from mavericks

    Can I install OS9 on an external drive from Mavericks? I'm running Mavericks 10.9.4 on both my MBP and 27" iMac. I have my original OS9 install disc. I'd like to install OS9 on an external drive so I can use some classic apps that I'd like to use.
    I tried to install directly to an external drive, but when I click on the Mac OS Install icon, I get the message "You can't open the application "%@" because it may be damaged or incomplete." The icon for Mac OS Install is the generic page with an A. Figuring that Mavericks doesn't recognize the app. Then I restarted and held down the C key - no luck.

    I understand, but was hoping I boot off an external drive in 9. Thanks for your response and I apologize for my late response.

  • HT4904 Help. I have an older 20 inch iMac and had Lion running on it but the internal hard drive died. I'm trying to install Lion on an external drive but it doesn't look like Lion Recovery is supported. I have Leopard installed but am stuck.

    Hello,
    My 20inch iMac's internal drive died and I'm trying to re-install Lion on an external drive. If I could get the Lion DMG file I think I'd be all set but am not sure how to do this. It doesn't look like the Lion Recovery feature is supported in my older iMac. And I have Leopard installed on the external drive but there's no AppStore to download the Lion DMG file.
    Any suggestions?
    Thanks,
    -Lee

    Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.

  • Problem Installing FCP Studio 2 on SL 10.6.2

    Hello All
    when trying to install an original FCP Studio 2,
    the installation gets stuck towards the end. (around 95% of the first general installation disk).
    this has happened 3 times.
    After rebooting, the programs seems to be in the application folder.
    but they are missing many files and meterial.
    ( because i did'nt get a chanse to go through the other Content disks... )
    did anyone had a problem installing FCP Studio 2 on SL ?

    Here's a way to work around the possiblitily of a damaged disk or an intermittent dvd reader.
    Insert your FCS install disk, make a disk image of it (using Disk Utility) and leave the image on the Desktop. Eject the FCS install disk, and create a disk image for each of the FCS disks.
    Now, with all the images on the desktop, double click on the install disk image and start the installation process. It should take less than an hour to install EVERYTHING.
    Once the installation is complete, copy the disk images to a safe place. You'll have them available if you ever need to reinstall FCS.
    good luck,
    x

  • Mybook Studio Edition external drive shows in macbook leopard but not imac

    I have a Mybook Studio Edition external drive that I am using to store files and as a backup for my macbook leopard using time machine. I wanted to add files from my imac tiger but it does not show up in disk utility and the system profiler says unrecognized drive. I don't remember formatting it - it was just plug and play out of the box. Does this mean it is formatted for Leopard and won't work on tiger?
    Is there something that time machine does that it will only be recognized by macbook?
    The imac is:
    2.4 ghz
    3gb ram
    300gb drive
    10.4.11
    the macbook is
    2.4ghz
    4gb ram
    300gb drive
    10.5.6

    Hello,
    On the iMac ... Try repairing disk permissions. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select FirstAid, then click: Repair Disk Permissions. Quit DU when it's finished and reboot.
    Carolyn

  • Do I need to uninstall FCP before installing FCP Studio 2?

    Hi all, I have Final Cut Pro Studio, FCP 5.1.4, Academic version, and recently got Final Cut Studio 2, and just wanted to check to see if I needed to completely reinstall FCP, or would just installing FCP Studio 2, do the trick?
    Thanks

    I'm still trying to figure out my plan of attack for installing FCS2 when it arrives today.
    Randy, do you at least delete the apps before installation, or do you just put the DVDs in and go?
    Most folks around here preach the complete reinstall of the OS and then installing FCS2...you don't agree?
    Just trying to get all opinions here...you are cleared of any blame when/if something goes wrong!

  • HT3986 can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    can bootcamp be used with Windows install disk on an external drive (internal is broken) ?

    With Boot Camp, you must install Windows onto in internal HDD (or SSD).  If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not.  I have heard varying levels of success with that.  I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.

  • Cannot install Snow Leopard onto external drive

    I'm attempting to install Snow Leopard on a second drive, an external bare drive in an Icy Dock enclosure connected to a MacPro (running 10.6.6) via serial port. Apple Disc Utility confirms that the external drive (a Seagate 325gb) has a partition map scheme GUID Partition Table. SMART Status is not supported. Connection Bus reads as SCSI but it's connected with a serial cable.
    I'm able to perform the first part of the install by selecting the external drive but when I have to restart and complete the install from the original Snow Leopard disc (10.6), the external drive no longer shows up. I've tried several times and have restarted the Icy Dock external drive enclosure.
    Any ideas? Thank you.

    Not necessarily. Use a backup utility so that you can deselect all the data from within your Home folder as well as third-party applications in order to create a bootable disk but without some of the excess. Any of the following should be suitable:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
    Message was edited by: Kappy

  • Install second version on external drive

    UPDATE: Found a download for portable 9.0, and installed it with Portable Apps. Working great, and I'm sure they'll be compatible with 10 soon, and I can upgrade. Leaving this here in case anyone else needs it.
    I am working for an online company that requires FF 6, 7, 8 or 9. It doesn't accept 10 right now, so I can't use portable apps, as it wil only install 10. I have 3.6, and don't want to lose it, as it is set up the exact way I want it and is very stable. I'm trying to install V. 9 on my external drive, but it won't let me, says I don't have the proper permissions.
    I'm not very geeky, so the instructions for setting up a second profile are sort of over my head. Can anyone give me some simple instructions for installing 9 on my external drive, or on a virtual drive, so I can use both? Thanks in advance for your help.

    See this article about how to install multiple versions on Mac OS X:
    * http://www.businessinsider.com/how-to-run-firefox-4-and-3-simultaneously-in-mac-os-x-with-multiple-firefox-profiles-2011-3

  • Install iPhoto 9 on external drive

    I am transitioning from a MacBook Pro with OSX 10.75 and iPhoto '11 to a new MacBook Pro with Yosemite, and no iPhoto installed.
    I want to install iPhoto on an external drive, because I have thousands of photos that are taking up too much space to even fit on my new Mac.
    When I go to the App store and choose Install on the iPhoto page, it does not give me the option to choose the location to install it onto.
    I have the external drive formatted Mac OS Extended (Case Sensitive, Journaled).
    How can I install iPhoto 9 on this external drive?

    The iPhoto Application MUST be in the applications folder - it can not be anywhere else
    The iphoto library (where you photos are stored) can be on any drive that is formatted Mac OS extended (journaled) and is directly connected to your Mac with a fast hard wired connection (Firewire, USB 2 or 3, Thunderbolt)
    Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
    And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
    And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
    LN

  • I think the DVD player reader on my Mac is going bad. Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive?

    I think the DVD player reader on my Mac is going bad. Until I get it fixed Is there a way to copy the files off of an Apple Install DVD onto an external drive and then do theinstall from the external drive? It's ILife 11 if that makes a difference. Finder won't let me see the files to copy. I know - dumb question.
    Thanks.
    Bob

    Adding an SSD is not a simple endeavour like adding additional memory or adding another hard drive to a Mac Pro. That's probably why the option is only offered as an option at the time of purchase. Even if your Apple store was willing to install the necessary parts you will probably be paying for 1-2 hours of labor plus the cost of purchasing the necessary service parts (SSD, bracket, cables, etc) which I suspect will make the upgrade cost much higher than what it costs to add the SSD option when purchasing a new system.
    I use my system for business and need it to work reliably.  Even though I'm fairly handy with tools I would not be willing to risk damaging my system and voiding my warranty by opening my system and removing the logic board and several other parts in order to squeeze in an SSD option and attach the appropriate cables and brackets. I'm also not prepared to deal with the hassles of explaining why my system has unauthorized parts installed in the event I experience issues and need to make use of my Apple warranty. My time is valuable, so I would probably investigate external storage options, or if I needed the speed of an SSD, I would consider selling my existing system and then purchase a new system configured with an SSD.
    If you haven't already done so I suggest doing a search on 'iMac SSD installation' to see what's involved. It might help you understand why the SSD option is not offered post purchase.

Maybe you are looking for