Install Flash on Mac OSX 10.6.8

Hi, I've followed the on-screen instructions but it still doesn't work. I tried the version for 10.6 up, presuming that 10.6.8 would be covered. What shall I do?

Please install the latest available version for Mac 10.6.8. it will work.
http://get.adobe.com/flashplayer/

Similar Messages

  • Installing flash player mac osx 10.5.8

    Hi, I'm unable to install flash player 10.1 on my mac os x 10.5.8. safari is my browser. the installation gets about halfway through until it stops with an unable to instal message. please help, as i am unable to watch anything.

    ryann tierney wrote:
    Ty for the help. It finally installed successfully! However, i'm still unable to view any videos & in response I recieve a 'missing plugin' response. any thoughts on this??
    Try this one next: https://discussions.apple.com/thread/2454737?start=15&tstart=0

  • Can't install flashplayer on Mac OSX v.10.6.8

    Can't install flashplayer on Mac OSX v.10.6.8  I get "missing plug-in" message whenever I try to run a clip. Nothing will run--utube, news clips, nothing.  I have uninstalled and then reinstalled flashplayer. what do I need to do???

    Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
    If it won't download directly, right click and "Save as"
    Go to: Mac HD/Library/Internet Plugins
    Trash the Flash Player.plugin file from there
    Go to: Mac HD/Library/Application Support/Adobe
    Trash the Flash Player folder (the whole folder)
    Empty the trash
    Reboot
    Mount the DMG and run the installer.
    BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

  • When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

    When downloading a pdf file I get a message that I must download Adobe Reader. When I do that I am told that it is already installed. Why can't I use it if it's already installed. I-Mac OsX 9.3

    g -
    I was able to fix the problem with some help from Apple. Whenever I last downloaded Reader, I apparently didn’t complete the process by accepting the Reader contract. I was able to go right to that point in the process and complete the installation. The messages that I needed Reader but it was already installed were quite confusing. It would have been nice if the Adobe installation process that I was re-trying this morning had been able to detect a partial installation. The Troubleshooting page almost had me doing some ridiculous things that wouldn’t have helped.
    MP

  • How to install freehand on Mac OSX 10.8 operating system

    How to install freehand on Mac OSX 10.8 operating system

    soniamp wrote:
    How to install freehand on Mac OSX 10.8 operating system
    1.  Installing Snow Leopard Server into Parallels for DUMMIES:
    http://forums.macrumors.com/showthread.php?t=1365439
    2.  Adobe's official patch for Freehand MX to run in Snow Leopard:
    http://helpx.adobe.com/freehand/kb/cant-launch-freehand-mx-mac.html
    Freehand MX running in Snow Leopard Server installed in Parallels for use in Lion, Mt. Lion and Mavericks:
                                  [click on image to enlarge]

  • Help please - Flash install fails on Mac OSX 10.9.5

    Installing Version 16.0.0.235 for Firefox on Mac runnng OS X 10.9.5
    A brief glimpse of white progress bar at 0% appears then dissapears from the grey install screen when you run the install. The grey box then just sits there.
    I have followed all the troubleshooting advice. I have de-installed flash then rebooted and tried again. I have done this twice just to make sure, but to no avail?
    Has anyone got any ideas?

    That is correct Das_Sad.  CS2 will not run on Intel based processors under Mac OS.  You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.

  • I can't get FLASH to Instal on my MAC  OSX 10.8.5  Beyand Frustrating!

    I have tried several times over the past 36 months to get the updates version of FLASH to install on my MAC.  It just won't do it.  I have gone to the Adobe Trouble shooting guide and followed all the steps.  Please help.  I am beyond frustrated!!!!!

    I did all that stuff that is referenced in Installation problems | Flash Player | Mac?
    I have no idea what a "Log File" is.....so  I would have an easier flying to the Moon than figure that out.
    What occurs is this:
    1) I download the Adobe Flash Player Installer
    2) I start the Install
    3) I ALWAYS get the same message at roughly 82% Install:  "Error: General Installation Error". 
    This is the same thing that happens over and over.  I have done everything that is referenced in the Installation problems | Flash Player | Mac post.
    On another note, I have ALWAYS been able to ib=nstall FLASH on every update up until about 6 months ago.  I know my original Post said "the past 36 months", but I meant to say the past 6 months.
    Thanks,
    Sam
    It is the same failure every time.
    Thanks,
    Sam  
    Sam Sharpe
    Virtual Tours Of Charlotte
    The Fusion of Vision and Light
    704.905.4722
    www.VTC-Home.com

  • Can't install latest version of flash on mac osx!

    I've been trying to install the latest version of Flash on my mac but at 30% the download stops and says that the connection is lost and the installation failed.
    I have already uninstalled, ran a clean install, tried other browsers and nothing has been working. Can anyone help?!

    Hello,
    I'm assuming your attempting to use the online installer, downloaded from get.adobe.com/flashplayer.  Please try the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page.
    Maria

  • Where to install Thunderbird on Mac OSX for multiple users.

    Hello,
    I would like to install the email program Mozilla Thunderbird on my Mac OSX (10.4.6) computer which is set up with several different user accounts. I am not sure where to install it so that everyone may be able to use it. I would like to install it once so that everyone may use it rather than installing it multiple times (once for each user).
    As you might already know, in Mac OSX when you install a program in the main applications folder, it is available for everyone who uses the computer (available to all accounts). However, the trouble is, that although the actual Thunderbird program is available to all users the profile is not. The profile obviously is an important component of the Thunderbird mail program as it contains all the actual mail messages. When Thunderbird is installed, by default the profile folder is placed in the users home Library folder at:
    users home folder/Library/Thunderbird/Profiles/<Profile name>/
    This location make it impossible for other users to access the profile and therefore Thunderbird will not work for the other users.
    What should I do?
    I have a couple solutions, however I would like to ask for some advice on what others do in this situation which I am sure is fairly common.
    Here are my solutions:
    1. Move the profile folder to a custom location that is accessible by all users in OSX such as the global Library folder (rather than the user's Library folder). Path of global Library folder:
    /library/
    Then let Thunderbird know it was moved to this custom location using Thunderbird's profile manager.
    2. Try to figure out a way in mac OSX that allows the profile folder at this default location:
    users home folder/Library/Thunderbird/Profiles/<Profile name>/
    to be accessible by all users.
    Ownership and permissions need to be changed for the profile folder maybe?
    3. Install thunderbird multiple times - once for each user - each with their own profile. The problem with this is then there will be multiple installations of the same program and they will not be able to share the same profile folder - which is what I would like to do - if possible.
    I have a feeling that solution 1 is the more logical solution.
    PS I am using Mac OS 10.4.6 (Tiger) with Thunderbird 1.5.0.4
    Thanks for any advice.

    Yup, its me again Always seem to have a question for the group
    Thanks Mulder and Scott! I am sure glad I asked for your advice. I am completely new to the multi-user environment of OSX - as you can tell. (I guess I am still in OS9 thinking mode where there was only one user.)
    Scott wrote:
    "Mail can be configured to download any new email, but not remove it from the server until it is removed from the Mail application. This way, the email can be downloaded to multiple clients across multiple accounts."
    Interesting. Thanks for pointing this out Scott. Good to know. This would seem to me to be similar to IMAP in some ways. This would be a good way to work in a multi-user environment. This is good info to be aware of.
    It sounds like an interesting way to work.
    Thanks to both of you for steering me aware from the difficulty of attempting to place the profile folder outside the home directory. This sounds like it would have been more work than necessary.
    Why am I not using Apple's Mail program? Good question. I thought I would try out Thunderbird for a while - and maybe switch to Apple Mail later - just to see which one I prefer. I am a web developer and I have always liked the open source community and I thought it would be beneficial for me to become as familiar as possible with all the Mozilla products (Firefox and Thunderbird). As well, it keeps me somewhat on the same wavelength as my PC friends, of whom many use this program too. I don't want to be too much out of touch with my mac. I might try Mail later. Thunderbird has been great so far. It has excellent spam recognition abilities and you can train it too to detect spam.
    Scott the "Family account" idea is an awesome idea. Thanks.
    I have learned a lot from this post. This gives me a few logical solutions. As Mulder points out it is best to keep users' profiles separate. This makes it simpler. Excellent advice. I could still install the Thunderbird application in the global application folder and then each user account can open this Thunderbird application from their own account and configure the mail client with their own profile. All users will be using the same Thunderbird application but with their own profiles. Yes, thats it. I tried this out and it seems to work now - didn't seem to work earlier because I didn't know what I was doing
    Another idea could be, if I really need to share one single profile, would be to follow Scotts advice and just set up a "Family account". Very simple solution. Nice idea.
    So, those are the two top solutions.
    Furthermore, I could use a mix of both strategies. For mail accounts that could be shared ([email protected]) I could create a "Family account" in OSX, as Scott detailed above, and then for mail accounts that are for each individual user ([email protected]), I could be sure they have separate profiles as detailed in Mulder's post.
    Thanks for all these helpful ideas!

  • I installed iousb family log release osx 10.5.6 and installed on my mac osx 10.5.8. I am trying to log and rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way 2 get my usb back?

    I installed IOUSB family log release osx 10.5.6 on my mac osx 10.5.8. I am trying to log an rfid reader on the usb. Sadly on restart the usb is no longer working. Happily Windows is still running OK. Is there a way to get my usb back working? And is there a way to navigate in Windows to the file I installed and remove it? Any help appreciated.

    BDAqua wrote: Does OSX boot at all, or not?
    Yes, it does. Right to where I am supposed to log in, but since the USB is not working (either mouse or keyboard), I'm stuck. I have to shut down and restart and boot into windows.

  • Installing flash on Mac os 10.9.5 and it keeps freezing 30-40% completed

    hello,
    trying to install flash on my mac operating ox 10.9.5
    I tried a "clean" install to no avail
    I have tried 7 or 8 times and every time it downloads to 30-40% then just sits there. all other downloads and installations are working just fine.
    any suggestions?
    many thanks
    Paul

    Try the offline installer:
    http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  • Trying to install flash player Mac OS 10.5.8

    when I try to install the installation starts then it just stops the first time it got to about 42% then said installation failed subsequent tries it only gets to about 9% at most then says installation failed I clicked on get support and followed the instructions still not working. I have Safari as my web browser version 5.0.6 Flash player is not currently installed on the computer HELP PLEASE!

    Flash Player 10.3.183.43 is the latest version supported on Mac 10.5.
    Could you please go through the following link and let us know at what step you get the error that you mentioned? http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#main-pa rs_heading_5
    Thanks,
    Sunil

  • Unable to Install Flash on Mac OS X Mountain Lion

    I have attempted several times to install Flash Player (11.7.700.225) on Mac OS X Mountain Lion (10.8.4), and every time I attempt to install it hangs on 20% during installation. I have ensured that there is no flash player installed on the Mac currently, and I have also deleted the original Flash download and re-downloaded a couple of times. I also attempted the troubleshooting solution (#7) found here http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#main-pa rs_header_0. However, this leads me nowhere because as you can see, my resources folder doesn't contain a .pkg file, nor do any of the other folders in the Contents folder (at least from what I can see). Do you have any other solutions for this problem? Cheers.

    Try this installer http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

  • Illustrator CS5 Instalation Problem on Mac OSX 10.5.8

    I have tried instaling this software multiple times and am getting errors in the program that reinstalling doesn't seem to fix.
    Here are the errors I'm getting:
    When opening a new document, I get the error: "Can't locate the Startup Profiles. Please try after installing Illustrator again.  Illustrator will now attempt to create a default document" 
    When quitting Illustrator, I get the error: "The Application Adobe Illustrator CS5 quit unexpectedly after it was relaunched.  Mac OSX and other applications are not affected.  Click relaunch to launch the application again.  Click Report to see more details or to send a report to Apple"
    I saved the report in case this is needed.
    After browsing user forums, I attempted to reinstall using the following steps:
    1) Before attempting any reinstallation, I deleted the folder drive/users/username/library/Preferences/Adobe Illustrator CS5 Settings/
    2) Unstalled Illustrator using the uninstaller package that comes with Illustrator. 
    3) Removed shortcut from menu
    4) Reinstalled Software.
    Please advise.
    Thanks,
    Mike Bryant
    Laboratory for Atmospheric and Space Physics

    After downloading CS5 I ran into multiple permissions errors, this is no exception.
    The following folder needs Read & Write access:
    Macintosh HD:Users:(Your User Name):Library:Application Support:Adobe:Adobe Illustrator CS5
    You can change this access by selecting "Get Info" on this folder, then adjust the Sharing & Permissions options so everyone can Read & Write.
    NOTE: This addresses the startup profiles only; crashing on quit is a separate issue.
    When you open up Illustrator this time and try to create a new document, Adobe magically creates a "en_US" folder within the Adobe Illustrator CS5 folder that couldn't be added before.
    Mac OSX 10.5.8

  • Error installing flash on Mac OS X

    Each time I try to install flash on my Mac OS X
    (10.4.7-10.4.10) I get the following error:
    Error Creating File
    1008:5,-5000 Access Denied Error
    After you click OK, I get the following:
    You do not have enough access privileges for this
    installation.
    I have done the following with no success.
    Verified the user is an admin.
    Uninstalled current version of Flash/repaired permissions on
    the driver/reinstall new version.
    Created new Admin account and attempted to load.
    Tried installing while logged in under the first admin
    created on the box.
    Scoured the web for suggestions.
    Viewed Adobe’s technical support site.
    I am not fluent with Linux, but have seen some stuff on the
    web to try but I am little leary of going there.
    Any suggestions would be greatly appreciated.

    try do a verify and repair disk permission, you can find this
    at applications>utilities>disk utilities

Maybe you are looking for

  • Windows Vista 9500m GT drivers

    All, I just installed vista on my macbook pro unibody (2.8, 4gb ram, 9600M GT 512MB). The 9600m GT that Vista will use is using the stock drivers. I tryed to download some drivers on NVIdias site and it says I dont have a 32 bit version of vista inst

  • Why cant i drag and drop music from my itunes to iphone 5?

    Hello, I can drag and drop to my ipad but not my iphone 5? Help, please. Its seems as though I did it when I first got my phone and now no can do.

  • "Log" action is not working in OSB10.3.1.0

    Hi All, I need a help. I am using a proxy which is listening to inbound JMS queue.Then the proxy is calling to a Business Service which also inturn pointing to a outbound JMS queue. In the proxy service i am doing a simple xslt transformation.To debu

  • Does calling class methods from bean and JSP cause collision?

    Hi, Please look at the class below: public class X // no member variable public X() {} // pay attention to static keyword public static int getY() Think a bean (say BeanZ) that make calls to getY() method without initializing the class X (like this:

  • Camera Raw update 5.07 is out:

    Adds support for the following cameras: Nikon D810 Panasonic Lumix DMC-FZ1000 It requires: OS X 10.8.5 or later iPhoto 9.4.3 or Aperture 3.4.5 A couple of things to note: 1. You don't have to install this update unless you a: shoot raw with b:either