Install Flash Studio 8 on Intel Mac

I have been trying to install Flash from the Macromedia
Studio 8 on my MacBook Pro. It gets almost done and has 190 files
left and just hangs. I read some other threads and found that the
problem was with the Extension Manager. So I downloaded the EM and
tried to install that by itself but it will not install at all. It
acts like it is installing. However it just says "Items remaining
to be installed: 190". It says that it is searching my hard drive,
but it just stays like that for as long as I let it try. I finally
just click stop and close the installer. I have let it run for half
an hour without change. Whatever it is doing, it certainly does eat
up processor time.
How can I get this installed?
Thanks.

Can you try to install without the extension manager? Then
try to install the EM by itself after?
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
jknacnud wrote:
> I called support and that had me remove all the files
and try again. Then they
> had me download the Flash 8 trial from the web site and
install that, but it
> did that same thing. It would not complete the install.
Still gets stuck at
> those last 190 files which belong to the Extension
Manager. So the problem
> really seems to be that the Extension Manager will not
install for me. How can
> I get around this?
>

Similar Messages

Why can't i install flash player 12 on my mac?

I am having problems installing flash palyer 12 on my mac osx 10.8, it says its installed but its not working i never had a problem with this before

How to perform a "clean install" of Flash Player in Mac OS X

Macromedia Studio 8 on Intel Mac

as a web developer i need to run these apps. anyone running this on their intel Mac?
is it slow? fast?

Recently being using Flash, Dreamweaver, Fireworks and Flash Video Encoder (all from Studio 8), seemed just as fast as my G5 PowerMac for most things, even the video encoding.
iFelix

Can't install logic studio on my Intel iMac

I have logic pro 7.2 installed on my intel iMac, which now runs maverics. However I now want to install my logic studio upgrade but I get an error saying that power pc applications are no longer supported. How do I get logic studio on my machine which clearly should work as it is built for intel macs when Logic pro 7.2 runs fine!

The following thread contains the method that uses Pacifist to achieve an installation of older Logic Pros on a Mac with more modern OS X versions when the installer no longer works...
I am assuming the LS upgrade is to LP8?
https://discussions.apple.com/message/18338482#18338482
Thanks to CCT for outlining the method used in this thread....

How to install OS X Server on Intel MAC

Hello,
I have early copy of Tiger OS X Server and I would like to install it on my Intel Mac. Can anyone help?
Thanks,
Vladik

Some have said that Apple has maintained that 10.4(.7) Server UB is a separate product with no upgrade/replacement policy.
However, I fully expect that Apple handles this on a by-case basis. If you've purchased Enterprise support and/or the Server maintenance package, then it's probably a different matter.
The most important thing is, as a customer, take this up with Apple.
Nothing said here will have much bearing on that - necessary - conversation.

Trouble installing flash player 11 on a mac

Some how my flash player got removed from my computer. I completely uninstalled it and have tried to reinstall it. When i go to reinstall i get to the thankyou your purchase should download page but it stops there or the screen just goes black and does not install the program on my computer. I am running lion.
Any help would be great.
Thanks,
Chris

Chris,
You have detailed steps on installing Flash Player on Mac here: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html#Downloa d_and_install_the_latest_Flash_Player_version
Thanks,
Sunil

Partition and install Leopard 10.5 on Intel Mac Pro

Hi,
I've just taken the plunge and dumped my PC in favour of a Mac Pro(details below).
MacPro2.4 8CX/6X1G/ 1TB/5770/SD
I've successfully created a BootCamp partition and have Windows XP up and running.
I now want to (need to) creat a partition in order to install a previous version of the Mac OS (10.5). This is required in order to install drivers that will allow me to link up with my Yamaha 01X (Yamaha have decided not to update their mlan drivers for anything above Mac OS 10.5... and I have Snow Leopard 10.6.7...
I've spoken to the Mac support teams and have received mixed messages ranging from "Yes, you can create a partition and install 10.5" to "No no no... that'll never work".
I'm sure there must be a way to achieve this (I mean - If I can have Windows XP up and running on my Mac surely I can create a partition and have a previous version running...).
So far I have:
Created a GUID partition, attempted to re-boot from the install disk (holding the C key). This hangs on the grey screen with apple logo.
I've also attempted to boot from the disk in safe mode (Holding the shift key). Hangs on the grey screen-apple log.
I've had the Mac OS (10.5) installed onto a external drive and attempted to boot from that (Hangs).
Is there something I am missing? Any help, guidance would be welcomed (unless it's along the lines of re-format and build from scratch as, let's face it, that isn't an useful option).
To re-cap: All I want to do is create a partition on my Mac-Pro and install Mac OS 10.5. I am not looking to replace my existing OS (10.6.7) with 10.5, just have a separate partition.
Thanks in advance.
D

Hi Grant,
Thanks for assisting me with this.
My Mac has Two 2.4GHz Quad-Core Intel Xeon “Westmere” (8 cores)
This link takes you to the full spec/ configuration:
http://store.apple.com/us_smb_78313/configure/MC561LL/A?mco=MTg2OTUwMTk
The retail version of Leopard that I'm attempting to install is: 10.5.6 so, I'm assuming, the install should work??
Is there anything I should check/ do prior to installing? (as every time I try the DVD spins and then halts - it's like it's trying to do something but can't).
Any pointers would be very much appreciated.
Thanks again,
D.

Can't install Flash Player on my Air Mac

I follow all the instructions but each time after the screen windows indicate it has loaded, but when I click on Finish, it takes me right back to Install Flash Player window and the app is NOT loaded.

Do a "Clean Install" per the instructions here: http://forums.adobe.com/thread/1343084

Failed to install Flash Builder 4.5 in Mac OSX 10.7 Lion

Quickly after starting the installation procedure, the installer says the installation is cancelled and gives me the following error report:
Exit Code: 24
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 16 error(s), 2 warning(s)
WARNING: DS013: Payload {ED679BB6-B428-4DCF-A52F-F9AAAA117101} Flash Player 10.0.45.2 is already installed and the session payload {09E9550D-7D89-4B9D-B6BB-72AF22CA9D3B} Flash Player 10.2.153.1 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {298CF0B0-8B47-46DF-B726-8E4BFAD5432E} AdobeHelp 1.0.0.0 is already installed and the session payload {B86DCC32-8B28-4788-8A09-6D1C9F7EAAAD} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
ERROR: DS013: Verifying payload integrity : Failed with code 1
ERROR: DW001: Set payload cancelled status
ERROR: DW049: Payload {09E9550D-7D89-4B9D-B6BB-72AF22CA9D3B} has an action "install" but no resultState
ERROR: DW049: Payload {24516988-6529-480E-8FE3-8428704FCAAB} has an action "install" but no resultState
ERROR: DW049: Payload {2C79B880-4D30-4572-91C7-FB6B6003DEF9} has an action "install" but no resultState
ERROR: DW049: Payload {3FA63389-0091-497A-8522-998E43648AEF} has an action "install" but no resultState
ERROR: DW049: Payload {6F3A624B-1B72-4081-96E8-23261F389C5C} has an action "repair" but no resultState
ERROR: DW049: Payload {9947B700-1D03-48A8-9C89-415C5E38D74F} has an action "install" but no resultState
ERROR: DW049: Payload {9D0088AD-BBB1-470B-B7B8-520EDEFAE5F3} has an action "install" but no resultState
ERROR: DW049: Payload {A04E70DF-CF2C-45FE-AA69-3267F28849D8} has an action "install" but no resultState
ERROR: DW049: Payload {B86DCC32-8B28-4788-8A09-6D1C9F7EAAAD} has an action "install" but no resultState
ERROR: DW049: Payload {BD0D6363-E961-410F-8BF4-ECD8795F3923} has an action "repair" but no resultState
ERROR: DW049: Payload {E0BCE1AA-B57D-4983-A05A-1B2CBF124494} has an action "install" but no resultState
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Suite Shared Configuration CS5: User cancelled installation
ERROR: DW001: User cancelled the operation
I tried both suggestions on this page which should solve installation issues: http://kb2.adobe.com/cps/905/cpsid_90508.html#main_Flash_Builder but no luck ...
Does anyone have any idea how to fix this?

I found the solution...for me, anyway...
I have a new Mac Mini Server running Lion Server and Lion. I could not get CS5 to install and was getting the same "DW049" errors.
As a new(er) Mac user I am hesitant to start tinkering with my system drive, partitions, OS, etc...I saw a lot of forum responses all over the place discussing the migration of apps from a MacBook Pro, loading Snow Leopard on top of Lion, etc. etc.
I didn't do any of that.
I simply removed any old install files.
Updated Java for OS X Lion here: http://support.apple.com/kb/DL1421
Restarted
Worked fine. Java update came out in July, apparently.
HTH,
Dave

Can I install iMovie 5 on an Intel mac?

Hello. I recently got a new Mac which came with iMovie 09 installed. If possible........I would like to also install iMovie 5 on the same machine (as I have lots of 3rd party effects with that version). So I'm wondering is this possible and how do I do it? I have my old install discs (1 and 2) for OS 10.2 and 10.4 ........I'm not sure which disk contains the iMovie 5 App. and how I would go about just installing iMovie 5 without the other iApps? Would there be any conflict in having the 2 iMovie Apps installed on the same Mac? Thanks for any help.

Okay, this is odd. I have Snow Leopard which came with my newest iMac Intel desktop I purchased about six months ago. When I bought it, I imported all of my old programs from my old Mac which ran on the Tiger OS, including iMovie 5. I have been using iMovie 5 on snow leopard with NO PROBLEM for the last six months to edit and save footage, since I hate the new iMovie 09 and find it completely user unfriendly.
However, today I was editing all afternoon, no issue, and then this evening I opened my project to start working, edited one transition and the program turned into a white screen and shut down. Now I can't open any imovie files on it. I tried deleting and importing the program again as I had originally, and it still won't load. What gives? How did it run perfectly for months and finally implode?
I did run a software update yesterday, but I edited without issue for roughly five hours after that. I was only about an hour away from finishing my project, and now I can't even open it! Any ideas?
I've heard there is a program called Rosetta - which was not installed when I bought the system but apparently is on the discs? - which can run some of the old programs. Would installing this solve the issue?

Installing FCS2 on a non-intel mac

Hi.
I already own one copy of FCS2 for my intel based mac, but I want to purchase another for my old g5 tower. is it possible? if so is there a particular version of osx that I need?
thanks!

You need 10.4.9 I believe.
And it installed just fine on my Dual 2Ghz G5. No issues. Even installed on my G4 Powerbook.
All it requires is a 1Ghz machine or faster. Read the system requirements...
Shane

Installed flash won't run on Mac OS 10.5.8?

Flash Player 10.3 has stopped working on Safari on our Mac OS x 10.5.8; I have installed/uninstalled it several times but we still get the same message. I have researched this forum and thought I had found success on a question posed Sep 26, 2011, however when went to Safari-Help-Installed Plug ins, there isn't one listed for Flash, so that answer won't solve our problem. Flash Player.plugin and flashplayer.xpt are both listed in library/internet plug-ins folder. Please help!

Have you got the answer to this because I have the same problem!! I use a Mac g4 and have version OSX10.5.8. Until the other day I could use Flash player. I am not an expert but can normally solve most problems. This is driving me mad. Can anyone help?
Many thanks

Difficulty installing flash player 10 on my Mac os x 10.4

I have tried countless times to install flashplayer 10 on my mac os x 10.4 (tiger) with no success. I have tried every troubleshooting suggestion, and at this point i am willing to try anything.
This is what happens:
I go to the adobe site and select the flashplayer 10 for my operating system.
The flashplayer icon appears on my desktop and i double click it.
I agree to the terms and click install
It states that installation is successful.
I then try to run a program and it says that i need to install flashplayer 10 in order for it to run, even though it says it has installed.
Anyone else having this problem? Any suggestions!
Thanks for your time!

This is the same issue that I have except I have Mac OS 10.6 Snow Leopard. Did you find out how to get Flash to work?

Trouble Installing Flash Player 10.1 on MAC PowerPC

I am trying to install the older Flash Player 10.1.6 on a MAC PowerPC Laptop running OS 10.5.8. Everytime I try to run the installer it crashes at 14% done. Any ideas?

First, make sure that you run the installer under an Administrator account.
If the error persists, you may need to go through the procedure outlined at http://kb2.adobe.com/cps/494/cpsid_49419.html

Can't install Firefox 4 on my Intel Mac laptops because message says I lack permissions for some of the items.

I installed Ff4 on my iMac soon after it came out. Then after serious problems developed with using Ff3.5.2 on my two Mac laptops (after Apple software upgrades Ff started kicking me off many sites whenever I tried to open something within a site, as I need to do for my work), I wanted to upgrade them to Ff4. I have downloaded it repeated times. The download is OK, but when I try to drag the icon into the apps folder it asks if I want to replace the older version. When I say yes, I get a message that say the operation cannot be completed because I don't have permissions for some of the items. That's where I am.

* Download a new copy of the Firefox program.
* Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Install Flash Studio 8 on Intel Mac

Similar Messages

Maybe you are looking for