Install Form 6i on Linux Mandrake 8, urgent !?

Hi all,
I am new in Linux and I have download Form 6i Release 2.
Please tell me step by step how to install Form 6i R2 on Linux Mandrake 8 because
I did not found any document about this in d2k6irelease2.tar and I very desperate.
Any suggestion I will very appreciate.
Thank you.
Teguh
null

someone please help!
Any suggestion I will very appreciate.

Similar Messages

How to install Form 6i on Linux Mandrake 8

Hi all,
i am new in linux.
please tell me step by step if you know how to install Form 6i R2 on Linux Mandrake 8.
Thank you a lot.

someone please help!
Any suggestion I will very appreciate.

How to install oracle 9i on linux mandrake 8???????????

Hi,
This is my configuration : Linux Mandrake 8.0 & Oracle 9i.
My problem occurs when i run "./runInstaller". Nothing happens, no error.
I have 3 directories Disk1, Disk2 & Disk3 in /TEMP/ (just my example).
I created " groupadd dba " ... and a user oracle. No problem!!
I saw the doc on "www.puschitz.com/InstallingOracle9i.html" but my problem is always here.
I didn't install the JDK.....is it ok???
I need download the JDK????
Which version???
I don't know.
Thanx to help me!
Have a good day.
Vincent

Joseph
I am installing 9i r2 on Mandrake 8.1 and have followed your instruction (as best I could) but I am having installation problems.
1. The fonts for JAVA are not being read correctly, but the install does begin. I am not installing from the console but using VNC to get to my little server.
2. Everything goes fine until I get the error "can't write to file ...jtc.h". I have tried to change permission ( chown 777) on file with no luck.
Exception String: Error in writing to file /data/u01/app/oracle/product/9.2.0/javavm/jahome/jtc.h
3. After that error, I then continue to get error throughout the install, until I just cancel
4. Do I have to make the set_shmmax change...I previously had 8.1.7 installed and had made a kernal memory change?
5. I did not change the "binutils"
Thanks for your help
Travis
OCP "Wanna Be"

How to install J2ME WTK on Linux Mandrake 10.1?

Hello!
I try to install J2ME WTK on to my Linux Mandrake 10.1but it does not work for me. Below is the output after the License agreement.
So if you got any ideas please let me know.
Best regards
Fredrik
Do you agree to the above license terms? [yes or no] yes
j2me_wireless_toolkit-2_2-linux-i386.bin: line 287: cd: /home/fredrik/downloads/Java: No such file or directory
Testing /usr/java/jdk1.5.0_01/bin/java...
A suitable Java interpreter was detected
0) Use /usr/java/jdk1.5.0_01/bin/
1) Specify a path to a Java interpreter directory.
2) Cancel this installation.
Select a choice [0-2]: 1
This application requires Java 2 SDK, Standard Edition (1.4 or later). Enter a path to a Java 2 SDK (For example: /user/jdk1.4/bin). You can type "exit" to cancel installation.
Enter a path to the Java 2 SDK: /usr/java/jdk1.5.0_01/bin
/usr/java/jdk1.5.0_01/bin/java
Testing /usr/java/jdk1.5.0_01/bin/java...
Please enter a directory into which you would like to install the J2me Wireless Toolkit, 2.2.
[ default is /home/fredrik/downloads/Java Micro edition/WTK2.2 ]:/usr/java
j2me_wireless_toolkit-2_2-linux-i386.bin: line 224: cd: /home/fredrik/downloads/Java: No such file or directory
Installation directory is /usr/java.
Setup has enough information to start copying the program files.
Current Settings:
Destination Directory
/usr/java/
JVM Folder
/usr/java/jdk1.5.0_01/bin/
Please choose one of the following options:
0) Begin copying files if you are satisfied with the settings .
1) Cancel the installation.
Select a choice [0-1]: 0
Failed to extract files. Installation will stop now.
Please try to install J2ME Wireless Toolkit again, or contact [email protected] for assistance.
[root@Stationary Java Micro edition]#

Don't add the /bin part of the path. The WTK only wants to parent directory for you J2SDK installation, which would be /usr/java/jdk1.5.0_01. Though I don't know that using J2SDK 1.5 is the best route to take. I would recommend going with the latest 1.4 until they update the WTK.

Installing Forms 6i on Linux

Exist any paper to install Forms on Linux ??
Where ?
Thanks in advanced,
HABO

This is a question for the Applications folks over at that forum. There might be people here that knows how to do it but you will probably have better luck there.

How to install forms 6i on linux-x86

Anyone help me installing forms 6i on RH AS3 ?

Has to be using gcc 2.96 and then there are couple of other tricks you need to do (installing a wrapper). There is a document on Metalink explaining how to install it on RH 3.0. Search the Metalink and you will find it.

Problems installing a platform in Linux Mandrake... HELP URGENT!!

Hi all.
I am new to ATG 5.6 (as developer) and can't get it started. Need help
ASAP!
Environment:
Mandrake Linux 8.1 (2.4.8-26)
ATG 5.6
When running ./startDynamo (sh script):
java.lang.NullPointerException
at atg.applauncher.AppLauncher.getMainClass(AppLauncher.java:421)
at atg.applauncher.AppLauncher.getMainMethod(AppLauncher.java:438)
at atg.applauncher.AppLauncher.launch(AppLauncher.java:596)
at atg.applauncher.dynamo.DynamoServerLauncher.main
(DynamoServerLauncher.java :149)
error happens at line 103 of <D5dir>/home/bin/dynamoEnv.sh
What's wrong??
Infinite Thx in advance
Bernardo

You need to start it with something akin to:
bin/startDynamo <servername> -l -m <Components>
ie.
bin/startDynamo appa0 -l -m DCS DPS DSS B2CCommerce CustSvc
Expect to have do some work to get it up. Also, this is all in the
Gettin Started manuals...

How to Install Forms 10g on Linux?

HI All
i download Oracle 10g Forms for Linux (File Name is "as_linux_x86_ids_101202_disk1.cpio").
Any one can help me how to install it on Linux (step by step)??
Regards
Saqib.

Better to read documentation
http://download.oracle.com/docs/cd/B25016_08//doc/dl/core/B16012_04/toc.htm

Ias9i in Linux Mandrake 8.1

SOMEBODY HAS INSTALLED THE IAS9I IN LINUX MANDRAKE 8. 1?
I would be appreciated if anybody gave a small guide of as making it,
Thank you !!

Hi, I managed to install oracle8i onto mandrake 8.1 but could never get 9ias installer to work.

Can't install Oracle 8.1.7 on Linux Mandrake 8.1

Hello,
I have a problem to run Oracle installer on Linux Mandrake 8.1. The installer crash with segmentation volation.
If anyone has a solution...
Thanks
For Information :I have also installed Oracle Client 8.1.7 on a Gentoo Linux 1.2 with success...

Please try to unset the following variables in your environment.
UNSET LANG
UNSET LIB_PATH
and then try to Invoke the runInstaller.
Thanks,
Srinivas Katta

Error at Creat asinstance When installing oracle forms 11g on linux

Hello all experts!!!,
i am installing oracle weblogic forms 11g on linux platform and i am getting error at Create as instance step.
components selected :--
forms ,reports,form builder report builder enterprise manager
OS Platform :-- Oracle Enterprise Linux 5.3 and also same error on Fedora Core 13
i have also Oracle Database 11g R2 installed on same machine.
the log says :---
[2010-09-13T12:55:38.831+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
[2010-09-13T12:55:38.838+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] Exit code from OPMNAdmin : 0
[2010-09-13T12:55:38.844+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 55] [ecid: 0000Ig9xHTOFw000jzwkno1CZRTb00000i,0] [[
oracle.as.provisioning.engine.CfgWorkflowException
at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)
at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)
at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance asinst_1.
Cause:
An internal operation has failed: Unable to validate NonJ2EEManagement Application deployment on admin server.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)
at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)
... 17 more
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)
at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)
at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)
at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)
... 18 more
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)
at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)
at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)
at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)
... 21 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)
... 24 more
Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.Deployer.run(Deployer.java:72)
... 29 more
Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
... 29 more
weblogic server installation is perfect no errors at all.
i also got the errors i got during installation ( im_emagent.mk and while running command gcc) . but thanks to OTN Forums i had managed to find out a fix. but on this error only solution i got is
TRY WINDOWS . but what about linux then? is there any solution on this error?
i am not much used to front-end ( java i mean). i am Oracle DBA Actually n want to install n try Weblogic
Kindly Help...

You can just copy the relevant parts (the ones marked with error). You can also look at the timing
when it happened the reports environment did not start.
From what i remember this could be a memory issue, standard every managed server (WLS_FORMS and WLS_REPORTS) instance
is configured with 1024m bytes of memory.
What we did is first install a forms instance and after that a reports instance. After the forms installation we adjusted the
memory parameters in setWLSEnv (<middleware-home>/user_projects/domains/<domain-name>/bin). Look in this file
for references to WLS_FORMS (something similar to: if [ "${SERVER_NAME}" = "WLS_FORMS" ] ; then).
Another thing which springs to my mind is, which products did you select. If you just want Forms and Reports
you can select just the following:
- Oracle Forms
- Oracle Reports
- Developer Tools aan.
- Management Components
- Oracle HTTP Server
and deselect the other options:
- Oracle Portal
- Oracle Discoverer
- Oracle WebCache
- Clustered (if you are not using clustering)
We also had to fix the following files (i do not think that you have to do this since your Forms did not show any problems):
- (On Windows) Copy the file msvcr71.dll (FMW/windows/extra) to WINDOWS/system32.
- Copy the file mod_wl_ohs.so (FMW/<operating-system>/extra) to <middleware-home>/as_1/ohs/modules.

Linking errors during install on Linux Mandrake

When I installed oracle (8.1.7) on linux mandrake I got a series of errors during
the very last portion of the install involving a bunch of *.mk files.
The first error says:
Error invoking target relink of makefile
$ORACLE_HOME/precomp/lib/ins_precomp.mk
All the others are virtually identical. I'm still pretty new to linux so I avoided
recompiling the kernel. Aside from that I followed the install instructions to the
letter. If anyone knows whats going on I would very much appreciate a push in
the right direction.

Alright, I've tried using the most recent archboot (2011.02-2) a couple times. I selected GRUB2 x86_64 EFI. It asked me whether or not I wanted to convert my existing MBR to GPT. When I say no, it says installation was successful, when I say yes, it drops me into parted, so I just quit. My GPT should be fine as is.
My issue is that now, in rEFIt, I only get OS X and Legacy OS options. Legacy just freezes my computer. The legacy option has been there since I last tried to install, though I've tried to get rid of it a few different ways.
Should I choose a different bootloader option? Can I use the cd to boot in and fix it manually? if possible, I'd like to keep using rEFIt.

Installing Forms Developer 6i on Linux

When I try to install Forms Developer (Server) 6i, I get an error that a file is missing, libXm.so.2. It seems to be connected to the Motif library that the installer asked for, but the server doesn't have Motif. Is it a requirement to install Developer?
Also, if I try to install it and select Create Database Objects, I don't get that error, but I get another one that goes like this:
'rdbms' software is not available in the current distribution source and has not been installed. You must obtain and install 'rdbms' software from some other source first. Note: You may also get this error if the Installer registry file has been overwritten.
Can anyone help me?
null

1. [Developer 6i Quick Install | http://www.oracle.com/technology/software/products/forms/files/d2k_quick_install.htm]
I'd say the article is about some rare distribution of Forms.
2. [knol - Install Oracle Developer 6i on Suse Linux | http://knol.google.com/k/install-oracle-developer-6i-on-suse-linux-es-8#]
3. [Howto for Oracle Forms & Reports Server and Client: Release 6i, Debian woody Linux | http://www.qwuh.com/oracle/]
Hope this helps.Well done.

Error installing Forms/Reports Server on linux m/c having EBS R12 installed

Hi,
We are trying to install Forms and Reports server (Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services) on a linux x86 box. The box already has Oracle E-business Suite R12 running on it. Our end goal is to install Oracle Transport Management (OTM), which requires Oracle Forms and Reports server to run its reports. When installing Forms and Report server I am getting following error. During installation, I gave a different set of ports to be used by Oracle Forms/Reports Apps server (and not the default) in staticports.ini and ensured that those ports are available. Any idea what could be the issue. If the issue is due to port conflict, how do I find which is the conflicting port. Also, is it possible to re-use Oracle Applications' Forms/Reports server for other applications like OTM.
Get the following error during installation of Oracle Application Server 10gR2 (10.1.2.0.2) Forms and Reports Services:
. Please also check the logs located at
ORACLE_HOME/dcm/logs to determine why DCM was unsuccessful in updating
the configuration files on disk. Some possible causes are:
* permissions on files
* file contention issues on Windows NT
* internal Oracle error
After resolving the problem that prevented DCM from updating the configuration
files, you may use the dcmctl resyncInstance command to resolve the problem.
Alternatively, you can stop and then restart the active dcmctl or EMD
process and resyncInstance will automatically be performed.
Resolution:
Base Exception:
java.net.BindException
Address already in use
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:331)
at java.net.Socket.bind(Socket.java:498)
at java.net.Socket.<init>(Socket.java:307)
at java.net.Socket.<init>(Socket.java:124)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.openOEMSSession(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.sendHTTPRequest(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getOpmnProcStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getProcessStatus(Unknown Source)
at oracle.ias.sysmgmt.clustermanagement.OpmnAgent.getComponentProcessStatus(Unknown Source)
I do now have much experience on DBA side, so my question may be very basic, but pls bear with me.
Thanks.
Namit

So ...
After a lot of searches, it was necessary a help from a Weblogic Administrator to find out what was going on with the installation process. The problem was with the memory allocation to the Weblogic VM. The process EMGC_OMS1 could not be started cos it was not possible to create a VM into SERVERADMIN.
With just my DB experience I could not find any logs besides emctl.log and that one that it's shown in OEM Installler interface. The Weblogic Administrator was browsing the HOME where the Weblogic was installed and he found logs that showed the error telling where the problem was. Even downloading the OEM 12c 32bit, it was allocated memory to the java as if it was 64bit. The solution was decreasing the values of memory and clicking in Retry. So, my OEM Cloud Control 12c it's working now.
Regards
Bruno Palma

Forms R12: install j2se plugin in Linux

when opening forms in R12 it shows the error like below :
In order to access this application, you must install the J2SE Plugin version 1.6.0_07 on your client and NPX_PLUGIN_PATH environment variable is set before starting Netscape. To install this plugin, click here to download the oaj2se.exe executable. Once the download is complete, double-click the oaj2se.exe file to install the plugin. You will be prompted to restart your browser when the installation is complete.
but as the given plugin is .exe so i cant install , wat to do now.
Edited by: user12235518 on Mar 7, 2012 11:51 PM

How to install a browser plug-in really has nothing to do with Oracle Forms or even EBusiness. Information on how to install the plug-in is available in the JRE documentation:
http://www.java.com/en/download/help/linux_install.xml
You can also post questions about installing a JRE on Linux in the Java (JRE) forum:
Java Runtime Environment (JRE)

Install Form 6i on Linux Mandrake 8, urgent !?

Similar Messages

Maybe you are looking for