Install from a usb or .iso

is it possible to install windows w/ boot camp using either an image or the image on an external HD?

lbroskee wrote:
ya i just found out my friend has 1 i can use, but 1 question...will these work for burning leopard?
http://www.walgreens.com/store/product.jsp?CATID=100448&navAction=jump&navCount= 0&skuid=sku2482890&id=prod2483453
and btw the leopard copy is under 3 gb so its not a matter of size
Leopard DVD is over 7 GB. It's a dual-layer DVD.

Similar Messages

When trying to install mountain lion onto my macbook from a usb it says im unable to install from the usb. What is the problem

hi i tried installing lion onto my macbook via a usb and when asks me to chose disk it says it can't install from this usb. anyone can help me figure out how to install it if i even can.

To Upgrade to Mountain Lion... Your Mac must be one of the following models:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)

My 2009 iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple log

My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Help needed with the installing from a USB drive

Hi, My HD failed and will not boot on my A665-3DV. I was able to retrieve all the data from both the partitions to another computer. I copied the data from the HDDRecovery partition to the USB flash drive. How do I use that data to install to a new HD?
Please help. Thanks!

It's not really hidden. You can connect the hard drive to an external device like coolmax (Coolmax CD-350-COMBO USB to IDE/SATA Device Adapter) which plugs in to a USB port on any PC. You can view the contents in explorer just as any other external HD.
Of course it took me a while to make the HD work (I beat the S**T out of it on the sides every time it didn't work). It took me a few days to get all the content out of it. It still would not work if I plugged it back into the laptop.
I made my flash drive bootable (http://www.ehow.com/how_5215265_make-bootable-flash-drive.html)
Copied the contents of the HDDRecovery partition to the flash drive and I was good to go.
Hope that helps!!

Clean install from an USB DVD-Recorder

Hi. My Superdrive is dead, and I want to upgrade to Snow Leopard. I have purchase the software install DVD and I want to install it from an external drive. Is it possible?
I want to format my HD because it has too much "garbage".
Thanks.

Hook up the ext DVD player, pop in the install disc, System Preferences->Startup Disk->select the install disc, and click Restart. If it boots with it, then you're good to go.
As for reformatting and reinstalling from scratch, that's a wasted effort. Better is to clean up the current boot volume before upgrading or upgrade and clean afterwards. Starting from scratch requires resetting all of your preferences and reinstalling all third-party software.

Install from live USB

I installed Arch on a USB using https://wiki.archlinux.org/index.php/Usb_install
and was wondering if it's possible to do the reverse, ie install on a normal machine using this live usb system using just arch-install-scripts
This method is not explicitly mentioned in the Wiki, so that's why I wanted to double check. Is it going to be a fully legit Arch installation?
Last edited by gothmog123 (2014-01-09 05:17:02)

tomk wrote:Well, it's not exactly a new idea, and it is mentioned in the wiki - it's a particular case covered by this.
Yes, but using that, you can't have X and other apps running during installation (because they are running on the partition you are installing onto), or sorry if I'm missing something.
Last edited by gothmog123 (2014-01-09 08:56:42)

Problems installing Windows 7 from a USB stick

I have got a brand new W510 that i am doing a clean install of Windows 7.
However i have faced major problems with installing from a USB stick attached to the W510.
Please notice that there isn't any problem installing Windows 7 to my other PC from this USB stick, this problem is only present with W510.
I have the BIOS from Lenovo v 1.35, Bios settting are reset to default to isolate any faulty settings.
In the readme file the say they have fixed some USB detection problems by Windows. bug still present??
Version 1.35 (BIOS ID: 6LET74WW) [for BIOS ID 6Lxxxxxx-based computer]
[Problem fixes]
- Fix an issue that a USB device is not recognized by Windows connecting
to USB 3.0 port.
Below is picture of the problem.
First i choose to boot from my USB Stick Sandisk Cruzer which Windows 7 files are placed, i know these files and the USB stick works with my other computer.
Picture 1
Next step when it boots
Picture 2
I press Install Now
Picture 3
This warning message comes up, can't find driver device
Picture 4
I click browse and try to find my USB stick, none of my USB sticks are listed, is this a Lenovo BIOS bug or Windows 7 Installation detection problem??
Picture 5

I think you need to fix your links, you seem to have maybe copied the post from another board / forum, the link style you have inserted doesn't work here.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Trying to do clean install from USB after kernel problem

MacBook Pro 13" Mid 2010
- was running OS X v 10.9
- 2.4 GHz Intel Core 2 Duo processor
Machine was running extremely slow, unable to do anything with it. When booted to safe mode, lag issue was not present. Booted to Disk Utility, left column showed (photoshoped to show how it looked originally):
Verified and repaired Macintosh HD and disk1 - OS X Base System, no problems.
Booted Option R - Erased Macintosh HD, tried to do new install from online, failed 3 times (took in excess of 8 hours each time). Still lagging, mouse movement very irratic.
Reset SMC, and NVRAM, some improvemet with mouse movement and speed
Read suggestions online to erase entire drive, boot from USB to DU, and install from bootable USB. Tried to do that. When in the boot from screen (Option) mouse lag not apparent. Chose USB, it opened up DU. Erased Macintosh HD again. Cannot delete or unmount OS X Base System, new screen looks like this:
From this screen, I exit back to the first screen and select Install OS X Mavericks, it gives me the choice to install on USB or Macintosh HD, I chose the latter, follow the steps, get a screen saying it's installing then it brings me back to DU after about 10 min. What am I missing here? Do I need to partition Macintosh HD creating a boot portion? I'm not a Mac person, I'm trying to fix this for my son.
Can I even do an install on Macintosh HD? I get that prior to booting to USB, I was using disk1, and so it couldn't be erased, but booting from the USB, would I not be using DU from the USB, and therefore able to clean the HD and start fresh? I'm guessing that the boot disk is causing the lag, and want to get rid of it.
Or is the disk showing disk3: OS X Install ESD accessible someone to do the install and I'm just going in circles?
I'd be extremely appreciative of any help you could provide, thank you.

Try this: (1) On your Mac mount the disk in the Time Capsule (probably called "Data"). (2) In the "Data" volume locate and mount the "sparsebundle" image that contains the "old" backups. (3) Click-and-hold on the Time Machine icon in the Dock, then choose from the pop-up menu the option to "Browse Other Time Machine Disks". That should give you access to the old files.

Please help me install Mountain Lion from my USB on my ERASED Macintosh HD partition.

Hi, So my Macbook 7.1 (running macosx 10.6.8) was running really slow due to poor user maintenance. I decided that i should purchase Mountain Lion and install it over the 10.6.8 version. That worked but my computer turned SUPER SLOW. So i decided to completely startover and erase the partition, and install from the USB. Unfortunately for me this is where my skillset ends, and I need help.
After erasing the Macintosh HD, i created a new GUID partition, and then clicked Restore. I dragged my USB drive under the "source", and dragged my new partition under the "destination". That didnt work so i erasaed the partition again. At this time, i got an error message saying that i cant erase the partition because its not unmounted.
So thats where Im at. I guess i need to know how to unmount the drive, then how to erase it, then partition it, and then install Mountain Lion from the bootable USB.
Appreciate your help!
Nick

I did the erase from Disk Utility. At the time I had started the computer by holding down Ctrl+R, so i am not sure which recovery drive it used. I can say however that I do still have the recovery partition.
Im a bit dense when it comes to Apples. How do i go about re-installing from the recovery? Also, how do i get around the unmouting issue?

OS X Snow Leopard install from (non-boot) USB memory stick

oi~
just bought this second hand and after i finally got into it (the seller forgot name/password) it turns out the DVD drive is malfunctioning, i was able to watch part of a movie but it will not boot from it nor let me install from DVD. (seller is not calling me back or responding to anything i sent) bottom-line for now i can live without the DVD drive but i would like to install OS X Snow Leopard.. can i copy the DVD contents onto a 8 GB USB memory stick (using a Vista pc) and install from the USB stick ? it does not have to be bootable as i realize to do that you must use the Mac.
i also have a old(er) iMac, maybe i can use that copy copy contents (if it even reads DVD's)
any help appreciated.. thanks.

thanks..
i thought i put my model # in my info, it's a MB061LL/B (Apple MacBook "Core 2 Duo" 2.0 13") darn... i keep getting stuck when i think i have a solution. so copying the contents of the disc to a network pc will not work either. or, could i make the
USB stick bootable and copy contents using a old iMac ?
added: i might be able to borrow a MacBook w/ a working DVD player.. is it a fairly quick and painless process to create a bootable USB stick + put OS X Snow Leopard on it ? (i'm rusty when it comes to Mac..)
Message was edited by: roeiboot

Installing Snow Leopard Server From a USB Sticki

In my job, I install Snow Leopard and Snow Leopard Server three or four times a day.
With Snow Leopard, I've found it easiest to install from a USB stick. So, I did a restore from a DVD to a USB in Disk Utility and it's worked great.
With Snow Leopard Server, it is not so simple. When trying to install from a USB stick, I get "Mac OS X 10.6 Server Cannot Be Installed To This Machine." Though strangely, installing from the DVD is no problem.
I've tried to restore straight from the DVD to the USB. I've also tried to install from the DVD to a disk image to the USB. Both times, the USB will mount fine, but I get that error message.
Am I missing a trick here?

Oddly enough it is working for me. I had some issues initially so I went out and bought ONE 16GB thumb-drive (major vendor) and partitioned into two partitions.
I restored one of the partitions with 10.6 and restored the other with 10.6 server. Works flawlessly for me though I do like netinstall. It is a bit slower than the FW800 drive though I do not have to carry around a power brick.
I hope this helps!

[SOLVED] can't boot from ssd after "reset" from recovery usb flash drive

I have a Twist s230u with the original Hitachi 500GB hdd, running Windows 8.1. I want to replace the Hitachi 500GB hdd in my Twist s230u with a PNY 240GB SSD that i've purchased.
While running Windows from the Hitachi HDD drive I followed the "create a recovery drive" procedure to create a recovery usb. Then I removed the Hitachi HDD from the s230u and installed the PNY 240 SSD in its place. I booted the s230u from the recovery flash drive that I made. I selected the "Reset Your PC" option and then the option to wipe all partition/files. After the Reset completes, I try booting from the SSD but am unable to do so. I just go back to the F12 boot menu.
I put the SSD in a drive dock attached to another computer. Disk Management shows the partitions as follows -
I've looked at the partitions on the SSD after the Reset - Disk Management console shows a 1000 MB Recovery partition, a 260MB EFI System partition, and a 221GB primary partition with volume label Windows8_OS. It is not marked as Boot, Page File, or Crash Dump.
Diskpart shows an an additional 128MB Reserved partition between the EFI partition and the primary partition.
I do notice that the 10.6 Lenovo Recovery partition is not present - but I did make sure that I included that partition on the recovery key - though the files on the recovery key only use 8.03 GB for some reason. Made the key on two different flash media.
Diskpart also shows the following for the SSD:
DISKPART> attributes disk
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
(It also looks like this when I run DISKPART from the recovery media with the SSD inside the internal drive bay of the s230u.)
When I did the Reset on the SSD in the s230u, and when I tried to boot from it - I had the Secure Boot disabled, the "Legacy Boot first" option set, etc.
Can anyone point me in the right direction to be able to boot Windows 8.1 from this SSD in the s230u? I've been working on this for a couple of days.
(I also tried cloning the HDD to the SDD using Minitool Partition Wizard, Macrium Reflect, Clonezilla, Acronis, etc - the SSD wouldn't boot after those clone operations either, and I thought maybe I'd have better luck with a reinstall from the USB recovery media.
(I also tried installing from a Windows 8 iso I burned to a DVD. I got a product id mismatch message when I tried to install from that, and I was not allowed to proceed.)

well, I seem to have solved my own problem. Maybe someone will learn from my mistakes.
I went into System Setup, went to the Startup tab, and changed the boot setting from "Both" to "UEFI Only". After doing this I booted from my USB recovery drive, and Reset the PC. After the Reset, I booted the s230u from the ssd, and I booted into a fresh Windows 8 installation.
It seems that the Reset operation could not work properly while the boot setting was "Both" (UEFI and Legacy) and "Legacy First."
I got a clue when I looked at the contents of the EFI System Partition and there was nothing there except a Temp folder. The EFI System Partition had not been properly written by the Reset operation. I got some helpful hints on how to see the contents of the EFI System Partition here - http://www.fixedbyvonnie.com/2013/12/how-to-repair-the-efi-bootloader-in-windows-8/#.U-Qz2_ldW7q
I've also buggered up my original HDD now, so that it won't boot to Windows now. Now to fix that!

Install Windows 7 USB Load Drive A required CD/DVD drive device driver error

I am trying to do a fresh install on a brand new laptop. I have downloaded a couple of Windows 7 iso images. I have used DiskPart to prepare my USB device and have used the Microsoft usb iso tool to put the Win7 iso image on to the USB device. I always seem
to get stuch after I click Install it quickly comes up with a problem.... Load Driver - A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now... I am installing from a USB drive
so why does Windows require a CD/DVD driver? How do I get Windows 7 to install?
I have read other forums were people have put it down to a corrupt download but I have tried with a couple of different downloads and same problem everytime!
Please help!
Thanks
Gavin

Hi,
This error message appears if the disk controller mode is incompatible during setup. And it can be caused by your CD/DVD drive may be incompatible with Microsoft’s AHCI driver. To work around this
issue, please go to BIOS and disable AHCI mode for your disk controller. You can change the AHCI mode to IDE or ATA mode instead.
It may also occur if the media is corrupted. Please visit the following link to rebuild the bootable USB stick for Windows Server 2008 R2:
Building a bootable USB stick for Windows 7/Windows Server 2008
R2
And please check the USB disk: put the USB disk in other machines and boot to see if it works.
Please make sure that the download files are not corrupted.
Regards,
Sabrina
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Sabrina
TechNet Community Support

Install "ON TO" USB troubles [SOLVED]

Hi guys,
New member here and first Arch experience.
I have fooled around with several Linux distros for the past year or so but I have decided that I am not happy with any of them. Most of them try to be as plug and play as possible, but I have found that the easiest ones to install are the most bloated and unreliable.
Using Arch would be an educational experience as much as building my own system that I can rely on. That being said, I am in learning mode so please be patient.
I want to install and build Arch onto a USB key. Most of the posts that I have found in this forum are in regards to having a USB installation key, or being able to install FROM a USB key.
My goal is to have a running OS ON my USB flash drive as I typically use this between two pc's. Plus its just cool. I currently have Fedora successfully running like this but its a little shaky.
So far I have Arch installed on my key, but when I try to boot, root is not recognized. I have followed the wiki to the letter, but still no joy.
In the wiki tutorial it was stated that on booting that root would most certainly not be recognized and to edit mkinitcpio.conf and add "USB" to the HOOKS line, Then rebuild, which I have done. Still no joy.
Does anybody here have a usb flash drive with Arch installed on it that can give a little insight on this?
FYI installation was done via LiveCD.
Thanks in advance.
Scott
Last edited by scottbg1 (2009-12-14 07:54:02)

Thanks Firecat,
From what I have read this should be persistent as well, but if this doesn't work out I will indeed check larch out.
I have had some success in my problem.
I should have checked this out before posting but "usb" wasn't in the hooks line of mkinitcpio.conf like I thought. The kernel image wasn't built as I had thought. When I tried to do it again it would fail and complain that the "kernel26.img" file did not excist on the boot folder, but I verified that it did.
I did a reinstall and edited the line in the configuration portion of the installation. It now works fine.
I am still puzzled about the complaint of the kernel26.img not being recognized in the boot file.
Nevertheless it is working now.
For those who might be researching a USB install and come across this post, I advise doing the configuration prior to the install rather than after as per the wiki instructions. It makes for a more pleasant experience.
Thanks again.
I will mark the subject of this thread as [SOLVED]

[Guide] Windows 8.1 PRO RTM clean install on Yoga 13 from a USB Stick

Hello everyone,
I recently installed Windows 8.1 Pro RTM successfully so I thought it may be useful to share the steps here.
Disclaimer: Please proceed with caution. I'm not responsible for any gain, loss, or harm done to you, your device, or your data.
Link to picture
Pre-requisites:
1- Windows 8.1 RTM ISO image. (Available on the internet)
2- Windows 8 Pro license key. (Yes, It works with 8.1 also)
3- Windows 7 USB/DVD Download tool
4- Lenovo Yoga 13 Windows 8 Drivers
5- USB Stick or HDD with at least 4GB space. (Note: All data on disk will be erased)
Steps:
1- Important: Take a full backup of HDD.
2- Plugin the USB disk then open Windows 7 USB/DVD Download Tool.
3- Point to WIN8.1 ISO image path and wait for the wizard to finish.
4- After the wizard completes succefully, keep the USB stick plugged in and then restart the device in UEFI mode.
( + C -> Settings -> General -> Advanced -> Restart now -> Use a device -> USB UEFI Device).
5- It shall boot from the USB device and begin Windows setup wizard.
6- Specify the preferred language and enter the license key and choose advanced installation.
7- In disk allocation wizard, delete partitions with the following labels: LENOVO, WINRE_DRV, SYSTEM_DRV
(Warning: Don't erase partition labeled PBR_DRV as this will erase the Lenovo recovery drive).
8- Select the resulted unallocated space (should be around 106 GB) and click next.
9- Now wait until Windows completes installation.
10- Customize Windows, install Windows drivers downloaded earlier and restore your backup.
11- Voila, shall you encounter any problems don't hesitate to ask me.
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

Sorry, forgot to mention that in order to boot from UEFI the flash drive must be formatted as FAT32. Windows USB and DVD tool supports only NTFS, So after creating the bootable image, copy all the files from the flash drive to the HDD then format the flash drive as FAT32 then copy the files back from the HDD to the flash drive. The flash drive will still be bootable.

Install from a usb or .iso

Similar Messages

Maybe you are looking for