Install FTP services on TMG 2010

We need to securely publish an FTP server to the internet. We already have a TMG 2010 server in place to securely publish Exchange 2010 ActiveSync and OWA. I know it can publish FTP sites. Is there any issue with the TMG 2010 server being
the FTP server itself; installing the FTP role on the TMG 2010 server and then publishing it securely? Any security issues with this?
J

Hi,
Forefront TMG is a Firewall and for security reasons (attack surface reduction) there should be no additional software installed on the TMG Server. But if you have no other choice it is possible to install a FTP Server on the TMG Server
best regards Marc Grote - www.it-training-grote.de

Similar Messages

How to install ftp service on the system?

OS: SuSE Linux Enterprise Server 8
How to install ftp service on the system?
How to check and modify to use it?
I am not able to use FTP.
Regards,
D

Rohit,
If its about installation/Deployment of Agent- then its through SDM,
'configuration' can be manual or Atuomatic:
Manual-> refer the installation Guide which digesh has mentioned -(from page 20).
Automatic- Its through Diagnostics Setup through Solman -(Its bit easy).
Thanks,
Jagan

Install Windows service in vs 2010

I want to install windows service in Windows Server 2008 machine. For that do i need to install entire Visual
Studio 2010 or else .net
framework 4.0 is enough to install this service.

no need to install entire visual studio 2010 just install the framework.
visit following links it will help you to install
http://www.c-sharpcorner.com/Blogs/11155/
http://www.aspdotnet-suresh.com/2011/06/how-to-install-windows-service-using.html
http://stackoverflow.com/questions/8164859/install-a-windows-service-using-a-windows-command-prompt

Lync 2013 clients behind TMG 2010

Hi
My escenario is as follow
Lync Client 2013 --> TMG 2010 --> ISP Router (without fillter ports)
I have a problema with this escenario because TMG drop me the voice calls and sudendly drop me the connection with the server.In TMG i created the following rullo
From internal to external, and URL Set (*.microsoftonline.com,
*.microsoftonline-p.com , *.onmicrosoft.com, sharepoint.com, *.outlook.com )
Protocols: http, htpps, RTP, SIP, Sip Server, Sips, Sips Server,
50040-50059 TCP Outbound
50000-50019 UDP Send Receive
3478 UDP Send Receive
59999 UDP Send Receive
50020-50039 UDP Send Receive
So what is the problema with this TMG 2010 (with all updates, SPs and rollouts)
Thanks

Hi,
The following blog might help.
http://www.jaapwesselius.com/2012/12/21/publish-lync-2013-services-in-tmg-2010/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to install Forfront TMG 2010 on Server 2008 R2 with Service Pack1

Hi I am Installing TMG 2010 on Server 2008R2 with service pack 1 ... then I am getting the error as below snapshot...kindly help me out
and I 've check event log then please find below snapshot :

Hi,
It seems that you have created an similar thread below:
Unable to install Forfront TMG 2010 on Server 2008 R2 with SP1
Since you have installed Service Pack 1 for Windows Server 2008 R2, please refer to the KB below:
Event ID 10 is logged in the Application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2
If the solutions in the thread above are not helpful, please feel free to contact us.
Best regards,
Susie

Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

Please help me about a issue of TMG 2010:
My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
then start it again. Check for related error messages."
and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
installed application filters and restart the service."
I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
i have try update windows and TMG latest but can not solved this issue.
i hope everyone help me as soon as. thank you so much.

HI Luis,
Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
Disable
Antivirus
Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
Try -
http://support.microsoft.com/kb/2649961
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
Ensure you have enough space for Log to be stored

Unable to install Forfront TMG 2010 on Server 2008 R2 with SP1

Hi I am Installing TMG 2010 on Server 2008R2 with service pack 1 ... then I am getting the error as below snapshot...kindly help me out

Hi Deepak
THanks a lot for your quick responce . Please find below logs which I 've find from C:\Windows\Temp. there are three text file in this folder. here I 've paste three files content as below
14:14:02 INFO:   Installer activated, command-line=''
14:14:02 INFO:   Expanded full extraction path of SQL Express 2008 SP1 Package is 'C:\Windows\temp\{196A1AC7-AE04-46AA-8CB3-196D6F4760C0}'.
14:14:02 INFO:   Install scenario
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: Upgrade code is not set
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: There is no any product code for upgrade code
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: Upgrade code is not set
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: There is no any product code for upgrade code
14:14:02 ERROR:   CSSEInstaller::GetInstanceId failed to open reg key 'SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL'
14:14:02 INFO:   CSSEInstaller::Prepare: Failed to get the instace id of MSFW
14:14:02 ERROR:   CSSEInstaller::GetInstanceId failed to open reg key 'SOFTWARE\Microsoft\Microsoft SQL Server\Instance Names\SQL'
14:14:02 INFO:   CSSEInstaller::Prepare: Failed to get the instace id of ISARS
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: Upgrade code is not set
14:14:02 INFO:   CMsiAttendantInstaller::Prepare: There is no any product code for upgrade code
14:14:02 INFO:   Installing ISA (Core components)...
14:14:02 INFO:   CFirewallInstaller: Activating installation, command line args = '-I "F:\FPC\MS_FPC_Server.msi "WRAPPER=1 ARPSYSTEMCOMPONENT=1 MEDIAPACKAGEPATH=\FPC\ REBOOT=ReallySuppress'
14:14:16 ERROR:   Setup failed. Error returned: 0x643
14:14:16 ERROR:   CBasicInstaller: Install failed, hr=0x80070643
14:14:16 ERROR:   Installation failed. hr = 0x80070643
14:14:16 ERROR:   Installation failed, hr=0x80070643
14:14:16 ERROR:   InstallProducts: Install ISA (Core components) failed, hr=0x80070643
14:14:26 ERROR:   Wrapper: Install failed, hr = 0x80070643
14:14:26 ERROR:   Wrapper: DoSetup failed, hr = 0x80070643
14:14:26 ERROR:   Wrapper: DoSetup failed, hr = 80070643
14:14:26 ERROR:   Setup of ISA failed. Return value: SETUP_ERROR_ISA
IInd File
14:14:10 ISA setup CA INFO   : ENTRY: ValidateSKU, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:10 ISA setup CA INFO   : OriginalDatabase = F:\FPC\MS_FPC_Server.msi
14:14:10 ISA setup CA INFO   : This is EE installation
14:14:10 ISA setup CA INFO   : EXIT: ValidateSKU, Custom Action succeeded
14:14:10 ISA setup CA INFO   : ENTRY: SetServerServiceRunning, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:10 ISA setup CA INFO   : Service lanmanserver is running
14:14:10 ISA setup CA INFO   : EXIT: SetServerServiceRunning, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: PropertyAssign, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : FW Services feature state: -1
14:14:11 ISA setup CA INFO   : EXIT: PropertyAssign, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: SetDotNetInstalledProperty, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : EXIT: SetDotNetInstalledProperty, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: SetRebootRequiredBeforeInstallationProperty, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : CheckExistValue failed. key = PendingFileRenameOperations.
14:14:11 ISA setup CA INFO   : FOpenKey failed. key = SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate\Auto Update\RebootRequired.
14:14:11 ISA setup CA INFO   : FOpenKey failed. key = SOFTWARE\Microsoft\Updates.
14:14:11 ISA setup CA INFO   : EXIT: SetRebootRequiredBeforeInstallationProperty, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: SetISARegistrySettingsForCOM, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : VerifyPropertyEqualValue: Property Sku =
14:14:11 ISA setup CA INFO   : EXIT: SetISARegistrySettingsForCOM, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: Set_RrasIsVpn, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : RRAS is configured as VPN.
14:14:11 ISA setup CA INFO   : EXIT: Set_RrasIsVpn, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: EE_ValidatePropertiesSyntax, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : Checking the length of properties
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ENTERPRISE_NAME length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ENTERPRISE_DESCR length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property STORAGESERVICE_ACCOUNT length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property STORAGESERVICE_PWD length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property STORAGESERVER_CONNECT_ACCOUNT length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property STORAGESERVER_CONNECT_PWD length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ARRAY_NAME length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ARRAY_DESCR length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ARRAY_DNS_NAME length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property REPLICATION_SOURCE_PATH length < 260
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property ARRAY_ENTERPRISEPOLICY length < 300
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property CLIENT_CERTIFICATE_FULLPATH length < 260
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property SERVER_CERTIFICATE_FULLPATH length < 260
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property SERVER_CERTIFICATE_PASSWORD length < 32
14:14:11 ISA setup CA INFO   : VerifyPropertyLength: Property FULLPATHANSWERFILE length < 260
14:14:11 ISA setup CA INFO   : Length of all properties is correct
14:14:11 ISA setup CA INFO   : Checking the syntax of some properties
14:14:11 ISA setup CA INFO   : Syntax condition of all properties is correct
14:14:11 ISA setup CA INFO   : Checking the syntax of the MSIPROP_ARRAY_INTERNALNET properties
14:14:11 ISA setup CA INFO   : Syntax of the properties internal range property is correct
14:14:11 ISA setup CA INFO   : Checking the syntax of the property ARRAY_INTERNALNET_ENT_NETS
14:14:11 ISA setup CA INFO   : Syntax of the property ARRAY_INTERNALNET_ENT_NETS is correct
14:14:11 ISA setup CA INFO   : Checking the syntax of the property INTRA_ARRAY_ADDRESS_IP
14:14:11 ISA setup CA INFO   : Checking the syntax of the property HOST_ID
14:14:11 ISA setup CA INFO   : Checking the existance of files in properties
14:14:11 ISA setup CA INFO   : All properties that contain files exist
14:14:11 ISA setup CA INFO   : EXIT: EE_ValidatePropertiesSyntax, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: ValidateRDPAddressType, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : TMG remote installation uses IPV4 connection
14:14:11 ISA setup CA INFO   : EXIT: ValidateRDPAddressType, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: GetEnvParams, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : The machine does not belong to any domain
14:14:11 ISA setup CA INFO   : EXIT: GetEnvParams, Custom Action succeeded
14:14:11 ISA setup CA INFO   : ENTRY: CalculateFirstDialog, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:11 ISA setup CA INFO   : Current dialog Flow is: /Dialogs/Dialog[@name='Flows']
14:14:11 ISA setup CA INFO   : Updated flow CurrentDialogFlow = /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']
14:14:11 ISA setup CA INFO   : Current dialog Flow is: /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']
14:14:11 ISA setup CA INFO   : Updated flow CurrentDialogFlow = /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']/Dialog[@name='InstallWelcome']
14:14:11 ISA setup CA INFO   : First Dialog in the flow: FirstDialog = InstallWelcome
14:14:11 ISA setup CA INFO   : EXIT: CalculateFirstDialog, Custom Action succeeded
14:14:13 ISA setup CA INFO   : ENTRY: CalculateNextDialog, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:13 ISA setup CA INFO   : Current dialog Flow is: /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']/Dialog[@name='InstallWelcome']
14:14:13 ISA setup CA INFO   : Updated flow CurrentDialogFlow = /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']/Dialog[@name='InstallWelcome']/Dialog[@name='LicenseAgreement']
14:14:13 ISA setup CA INFO   : Next dialog in the flow is: NextDialog = LicenseAgreement
14:14:13 ISA setup CA INFO   : EXIT: CalculateNextDialog, Custom Action succeeded
14:14:15 ISA setup CA INFO   : ENTRY: CalculateNextDialog, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:15 ISA setup CA INFO   : Current dialog Flow is: /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']/Dialog[@name='InstallWelcome']/Dialog[@name='LicenseAgreement']
14:14:15 ISA setup CA INFO   : Updated flow CurrentDialogFlow = /Dialogs/Dialog[@name='Flows']/Dialog[@name='EE']/Dialog[@name='InstallWelcome']/Dialog[@name='LicenseAgreement']/Dialog[@name='CustomerInformation']
14:14:15 ISA setup CA INFO   : Next dialog in the flow is: NextDialog = CustomerInformation
14:14:15 ISA setup CA INFO   : EXIT: CalculateNextDialog, Custom Action succeeded
14:14:16 ISA setup CA INFO   : ENTRY: ValidatePIDGenX, PID 2220 (0x8AC), Current user is WIN-BTIIPGG01E6\Administrator
14:14:16 ISA setup CA INFO   : OriginalDatabase = F:\FPC\MS_FPC_Server.msi
14:14:16 ISA setup CA ERROR : LoadLibrary(F:\FPC\Program Files\Microsoft ISA Server\msfpcPidGenX.dll) failed, ec=193
14:14:16 ISA setup CA ERROR : Setup failed while validating Product ID.
14:14:16 ISA setup CA ERROR : (Error 28021) Setup failed while validating Product ID.
14:14:16 ISA setup CA ERROR : EXIT: ValidatePIDGenX, Custom Action failed (0x643)
IIIrd File
Logging stopped: 4/7/2014 14:14:16 ===
MSI (c) (E4:34) [14:14:16:224]: Note: 1: 1708
MSI (c) (E4:34) [14:14:16:224]: Product: Microsoft Forefront Threat Management Gateway EE -- Installation operation failed.
MSI (c) (E4:34) [14:14:16:224]: Windows Installer installed the product. Product Name: Microsoft Forefront Threat Management Gateway EE . Product Version: 7.0.7734. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (c) (E4:34) [14:14:16:224]: Grabbed execution mutex.
MSI (c) (E4:34) [14:14:16:224]: Cleaning up uninstalled install packages, if any exist
MSI (c) (E4:34) [14:14:16:224]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/7/2014 14:14:16 ===
Below error Code I got from Application Event
Product: Microsoft Forefront Threat Management Gateway EE -- Setup failed while validating Product ID.
Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events
cannot be delivered through this filter until the problem is corrected.

Forefront TMG 2010 Error from management console

Hi,
I am having a problem connecting to a TMG 2010 array from an installation of TMG management console we are receiving the error 'Refresh Failed' 'Error 0x80070057' ' The Parameter is incorrect'.
The only article i can find on this error is this http://support.microsoft.com/kb/2591719 which doesn't seem to apply to our setup or this problem but I have applied Service pack 2 anyway but still get same error. The only other thing i can find is
a few people saying the management console needs to be at the same version as the TMG servers you are trying to connect to but I cannot see how this can be done as when I try to run the service pack on the machine with only the management console I get an
error as the full installation is not there.

Hi，
Firstly, have you found any related information in the event logs?
Nest, you can check the version of the TMG server from the TMG help menu, TMG system node or using Control Panel. For more detailed information, please refer to the link below:
How to Determine Which Version of TMG
Server 2010 Is Installed
In addition, what hotfix rollup or Server pack have you installed? Please refer to the recommended order below:
Forefront TMG 2010 Service Pack, Rollup, and
Version Number Reference
Best regards,
Susie

TMG 2010 to connect Branch Office

We have TMG 2010 installed for proxy solution. Recently we opened new branch office but they are unable to internet through proxy. I have added the route add command in TMG Server.
route add 10.24.84.0 mask 255.255.255.224 10.24.30.20 -p - Branch 1
route add 10.24.86.0 mask 255.255.255.224 10.24.30.20 -p - Branch 2
10.24.30.20 is our core router IP...
Is there any configuration required in core router and branch office router...Branch office users can access all server service except proxy solution.Please advice

HI
In your branch office,
YOu need to ensure that internal Branch office subnet is able to reach TMG server. Need route to TMG networ from branch office on branch office Router,
TMG should have route to reach Branch office network.
Add branch office subnet as internal in TMG network range

]TMG 2010 SP2 Rollup 5 - None Available Worker threads

Hi Guys,
We're experiencing some problems with our TMG 2010 Array (SP2 Rollup 5 ),and the first thing I can see is that the "Available Worker Threads" are 0 many times during the day. How can debug further this issue to know the root cause?'
Best Regards
Federico Giampietri Latamsupport IT Infrastructure Services

Hi,
>>"Available Worker Threads" are 0 many times during the day.
Could you see any other abnormal symptom in TMG?
The issue in the KB below has a symptom that "The Available Worker Threads counter in the Forefront TMG Firewall Service may suddenly decrease to zero". But this has been fixed in Rollup 5. If you still have the same issue after
installing Rollup 5, you may need to open a case with Microsoft.
FIX: Server that's running Forefront Threat Management Gateway 2010 stops accepting all new connections and becomes unresponsive
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Supporting of Broadcast and Multicast in TMG 2010 !

I have installed TMG 2010 SP2 at Windows 2008 R2.
So, as I read TMG blocks as broadcast as multicast.
And such built-in only one way default behaviour is not right.
I want in my own (as user/admin) define whether it is necessary to me or not as following there have to be ability to switch it on/off such option, for example as checkboxes for each network (address range) defined by default/user - one for broadcast and
one for multicast.
So, please add such functionality to kernel mode driver and to service in the next nearest SP or rollup.
And/or tell how is it possible to switch it on at Tmg 2010 SP2 and later.
There are some important services relying on broadcast: NetBios, Dhcp, some Alladin hardkey protection, some special soft.
If somebody of MS techinians will send registry parameter for this or specially designed driver, all will under my responsibility only.

I didn' t find Threat Management Gateway
topic at https://connect.microsoft.com/directory
Please open such topic at https://connect.microsoft.com/directory.
I will post suggestion or you can do so in your own.
I see this as following: next roll up adding two checkboxes and also two array input fields for Each Rule: multicast traffic checkbox and array where some (one or more) IP addresses can be put and broadcast traffic checkbox with also array input (for example
192.168.0.255 and 255.255.255.255 - both IP, not mask) .
For example, I want to allow out/in (from LocalHost/to LocalHost) for NetBios 137, 138 port services broadcast, but drop out/in Dhcp Broadcast and allow out only
Sentinel HASP License Manager uses port 1947 broadcast. Of, course this example is for/from internal net only
So, and admins/users uses of Tmg only may define in their own or decide whether it is necessary at all and what rule/rules is/are necassary for.
Warning message can be appeared if admin set multicast and/or broadcast checbox for external net (differs from lan and localhost) but if it is necessary admin can continue anyway to do so.
Or may be make global settings (also 2 checkboxes and 2 array input control) but if it set to on, multicast/broadcat will allow if allowing appropriate rule (for examplee for NetBios) exist if drop Dhcp rule exist additionally to NetBios allowing rule, so
multicast/broadcast will be allowed to NetBios nd will not be dropped for Dhcp.
And some changes are necessary to make in kernel mode driver as I suppose.
I can become a first tester. :))))))))
P. S.: At the moment even outgoing traffic with sender IP of LocalHost (for example 192.168.0.100) and destination IP of broadcast (192.168.0.255) is blocked also.

Installation of Client Access role fails on Windows Server 2008 R2 (Execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP")

Hello
I am trying to install Exchange Server 2010 beta 1 onto a Windows Server 2008 R2 (build 7000) machine which has also been set up as a domain controller.
However when attempting to install the Client Access role, setup fails with the error below.
Does anyone know of a way to get around this please?
I have already searched for this error and not found any similar threads.
Also every time I press the code button on this forum it crashes the browser and I keep losing the message! (IE8 from within Server R2). Also the message box is very small, will not expand and keeps jumping to the top.
Thanks
Robin
[code]
Summary: 4 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:01
Preparing Setup
Completed
Elapsed Time: 00:00:00
Client Access Role
Failed
Error:
The execution of: "$error.Clear(); Install-ExchangeCertificate -services "IIS, POP, IMAP" -DomainController $RoleDomainController", generated the following error: "Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.".
Could not grant Network Service access to the certificate with thumbprint 2F320F5D5B5C6873E54C8AB57F604D8AFA31D18C because a cryptographic exception was thrown.
Access is denied.
Elapsed Time: 00:00:01
Mailbox Role
Cancelled
Finalizing Setup
Cancelled
[/code]
Robin Wilson

Hello
Thanks for all the replies.
I have since wiped the system and installed everything again and it all worked this time so not sure what was wrong last time. I did try to uninstall all Exchange components and then uninstall IIS and Application server, reboot and re-install but I received the same error still when it came to installing the client access role.
Walter: I just attempted the standard installation which should have used the default self-signed certificate. Everything was a fresh install done at the same time on a freshly formatted PC.
For info last time when it failed to work:
- Installed Windows Server 2008 R2
- Installed Domain Controller role using dcpromo. I set the forest and domain as Windows Server 2008 R2
- Added a forest trust between main domain and test Exchange domain (set up as ex2010.local)
- Installed IIS and Application Server role
- Installed Hyper-v role
- Installed Desktop Experience feature
- Installed Exchange and recieved the error
When it worked I set up the forest and domain in Windows Server 2008 mode (i.e. not R2), installed Exchange first and then set up the forest trust and then Hyper-v. It did say it failed to configure dns which was probably because it started trying to do automatic updates half way through the dcpromo! DNS seems to work ok though.
I did notice this time that Hyper-v gave a warning about the virtual network adapter not being set up correctly and the local network did not work correctly although I could access the internet. Not sure if this could have been related to the cause of the problem previously. For now I have disabled the virtual network until I get time to try and get it working and so the mail will work in the meantime.
I also noticed that Hyper-v added an extra 443 ssl binding to the default website so as it had 2 bindings on port 443 it refused to start. After deleting one it worked.
I decided to install Exchange onto a domain controller as it is only a test and I wouldn't do it in a live environment. I am also short of test machines! It didn't give me any warnings about this actually, I think previous versions warn you that it is not recommended.
Andreas and Chinthaka: I did not know about the requirement to run the domain at 2003 mode. The main domain is running in 2008 mode with Exchange 2007 so I assume this is just a temporary beta related requirement. It does seem to be working (second attempt) so far in a 2008 mode domain although I haven't had a chance to fully test it yet.
Thanks
Robin
P.S. Sorry it's taken me a while to reply!
Robin Wilson

How do I install Oracle Service Bus?

Much thanks to anyone who can help! I have been a developer for 20 years and I have never had so much trouble with run a setup program.
I am trying to install Oracle Service Bus 11g on a Windows 7 machine. I have successfully installed WebLogic 10.3. The Oracle Service Bus installation program wants me to enter the paths for Oracle Middleware Home, Oracle Home Directory, Weblogic Server Location and OEPE Location. No matter what I enter for these I am told they are incorrect. For example:
Specified Weblogic home location is not a valid location.
Let's concentrate on just the Weblogic home location. I have tried every directory and sub-directory where Weblogic has been installed. No matter what path I enter, I get the error message above.
Setup defaults this path location to C:\bea_default\wlserver_10.3 so I tried copying everything to this path. Still I am told the location is not a valid location. How does anyone ever get this to work? What am I doing wrong?

Hi.
I have exactly the same problem than 786801. In the "Specify Installation Location" screen of the Oracle Service Bus installation process, after providing the correct paths, the message "INST-07248: Specified Weblogic home location is not a valid location" appears.
WebLogic Server 10.3.3 is installed in /opt/oracle/middleware
The folder wlserver_10.3 exists under that path, so I'm entering /opt/oracle/middleware/wlserver_10.3 as WebLogic Server Location.
In addition to the WebLogic Server, I have installed SOA Suite 11g without problems. The database schemas for that products have been created with the Repository Creation Utility.
I don't know what to do. Any help would be so much appreciated.
Here are some lines of the installation log, where the problem appears:
==============
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Setting valueOf(WL_HOME) to:/opt/oracle/middleware/wlserver_10.3. Value obtained from:USER
[2010-10-22T12:44:20.148+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Inputs passed to the handler: [ WL_HOME ( homeLocation ) = "/opt/oracle/middleware/wlserver_10.3" ]
[2010-10-22T12:44:20.150+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch begin: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Entering method executeHandler
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Fetching the value of homeLocation
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Error:Error in validating Weblogic home location
[2010-10-22T12:44:20.153+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Cause:Specified Weblogic home location is not a valid location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Action:Enter a valid Weblogic home location
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidWeblogicHome] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Exiting method executeHandler
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler launch end: weblogicQueries.isValidWeblogicHome
[2010-10-22T12:44:20.154+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 12] [ecid: 0000IjJWD^7DwWKzESePOC1CkMYU000003,0] Handler returned status: FAILED
==============
It doesn't give much info, just that the path is invalid and the error type.
Any idea?
Thanks in advance.

How to enable FTP service in Solaris 10

Hello, Everybody
I installed my first Solaris 10 today, but I have a problem with FTP process, I found I could not ftp to my new server from other equipments. It seems that FTP service is disabled by default.
Could you any guy tell me how to enable FTP in Solaris 10?
Thanks in advance.
-jason

Since the OS is Solaris 10, how about using SMF's svcadm tool to enable/disable ftp service.
eg.,
# svcadm disable /network/ftp
# ftp localhost
ftp: connect to address 127.0.0.1: Connection refused
Trying ::1...
ftp: connect: Network is unreachable
ftp> bye
# svcadm enable /network/ftp
# ftp localhost
Connected to localhost.
220 sunfire.anonymous.com FTP server ready.
Name (localhost:giri): 331 Password required for giri.
Password:

Install window services for managed server

hi all, i wanted to install window services for managed server. Can anyone advice me how to do it? My weblogic version is 10. Thanks in advance.

Hi,
Please refer to the following link....it might be helpful: http://weblogic-wonders.com/weblogic/2010/03/13/managed-server-as-windows-service/

Install FTP services on TMG 2010

Similar Messages

Maybe you are looking for