Install G4 933mhz processor in Mac Beige Powermac G3

The question is can this swap be done?
TIA to all.
Jack

I've got a 933 mhz processor I could part with. I have a g4 quicksilver 933 with no problems, EXCEPT the ultra ata port is messed up and keeps giving me I/O errors when I try to reinstall. Currently the HD and DVD drives are on the same ide bus and the system works fine, but since I have a quadcore now I really have no use for the quicksilver..
Anyways.. if you're still looking for a 933 mhz let me know

Similar Messages

Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

    Hi All,
     I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
     What are relative speeds of USB vs. Firewire vs. eSATA ?
     I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Thanks

Jim Bogy wrote:
...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
      ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

Installing an intel processor on a power mac G5 (2004) with mac os Xpanther

Hi everyone,
I really need some help, I need to update my Power Mac G5 because I discover that almost every single new upgrade for Final Cut Pro is for Intel Macs, so i would like to know if it is possible to install this processor to my oldie computer or can I upgrade my panther system to a leopard and being able to run the new programs??'. Thanks a lot
Eugenia

You can't install an Intel processor in your G5. For Intel you need to buy a new/newer Mac.
Here's the *Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950 To upgrade, you can skip Tiger 10.4.
Recommend you increase RAM more than the minimum.
 Cheers, Tom

Installing Dual 500mhz Processor from G4

I have a B&W G3 that currently has a 400mhz processor. I just salvaged a Dual 500mhz processor from a dying Powermac G4. How can I replace the processor? Will it work? thanks.

That dual G4 processor uses the 300-pin rectangular connector. The processor board is much larger, and is installed with three or four screws over as many posts on the motherboard.
The Blue & White G3 processors, like the beige G3 before them, and the very first "PCI-graphics" G4, use a 305-pin nearly square pin grid array inserted into a ZIF socket.
They are not compatible, and the signals have been changed -- there are no adapters.

Can I install Mountain Lion in my Mac Pro

Can I install Mountain Lion in my Mac Pro? This is my main computer and i only wnt to move forward if I know that it is 100% compatible with OS 10.8. They tell you to look to see when it was built but there is no date that I can see. I'm pretty sure I got it in early 2008 ... Here's the Hardware overview, without the serial number:
Model Name:          Mac Pro
Model Identifier:          MacPro3,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3.2 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          12 MB
Memory:          16 GB
Bus Speed:          1.6 GHz
Boot ROM Version:          MP31.006C.B05
SMC Version (system):          1.25f4
Serial Number (system):
Hardware UUID:          449CFA37-8EAE-5A08-9027-1236BC17C747
Thanks much.

Yes, you can.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Trying to install Windows 7 on my mac pro

Trying to install Windows 7 on my mac pro. I'm running 10.6, I have boot camp 3.04 and after I partition and install the disc (using 32bit) it restarts automatically and freezes on a black screen. I have updated my software so what should I do? Thanks.

A., Use 64-bit for sure. You have too much RAM and hardware and VRAM
B. Put Windows 7 Pro 64-bit SP1, you have a dual processor you need Pro.
C. A dedicated drive for Windows.
D. At least 50GB
E. most important, pull all drives out and leave in just the drive Windows will install onto.

QT 7.0.4 Install Doesnt Work Correctly on MAC OS 10.3.9

I dloaded QT 7.0.4 and installed it on a 1.25 mHz Dual Processor G4 MAC computer with 1.5 GIGS of RAM frunning MAC OS 10.3.9. I typed in the Pro Serial Number. When I click on either previously made in QT 6.5.2 movies or movies exported from SoundTrack Pro the QT 7.0.4 application DOES NOT EVEN OPEN. Either I get NOTHING or an error message that says the application has timed out. I only installed QT 7.0.4 and SoundTrack Pro for a project students are doing in the lab.
Any Help is appreciated since it SHOULD WORK. Thank you.

This is more of a solution for programmers than it is for users. I tried to hack an application this way and had no luck. If you really want to try, be sure to make a backup of your application first. Just copy it and paste a copy to your desktop or somewhere safe.
For the version you are editing, right click (or hold control and click) and select "Show Package Contents". Go to Contents->MacOS and you will see the actual program or in the case of Java applications, a file called JavaApplicationStub. This is the file to overwrite.
Keep in mind, this isn't entirely likely to work. It really depends on the application. You are better off reverting to Quicktime 7.01 using Apple's QT 7.01 reinstaller, or if you already upgraded to 7.1 use Pacifist to force the installation of both QT 7.04 and the 7.01 reinstaller. That worked for me.
iBook G4 1GHz / 768MB Mac OS X (10.3.9)

Installing L8 on a new Mac Pro = more than 2 simultaneous authorizations!?

I'm just a couple of days away from taking delivery of a new Mac Pro and will soon be undertaking the tedious process of updating and installing all of the applications and plug-ins currently taking up residence on the system drive of my Dual 2.7 G5 PowerMac.
My question is this. Since I presently have L8 installed on both the G5 and my MBP, and (as I understand it) Apple only allows for 2 simultaneous installations of Logic Studio/L8, what kind of challenges (if any) am I going to run into installing L8 on the new Mac Pro while it's still installed on the other 2 machines? My intent is to ultimately wipe the G5's HD clean once this has been done and it appears everything is working properly on the Mac Pro, but certainly not before it's been done.
Anyone have a definitive answer on this matter?

It's been several weeks since I installed L8 on both my MBP and PowerMac, but I seem to recall in both cases having to go through some kind of actual "registration" process before completing the install. I'm assuming there's something on Apple's end that associates the registration to a specific machine ID when it's done online. If that's the case, and it has to be done each time L8 is installed, I don't suppose it would be too difficult for Apple to figure out you're running it on more than 2 machines.
In any case, if you're of the opinion that it really doesn't matter, I guess I'll find out when I begin migrating everything over to the new MacPro within the next couple of days. Thanks again for your help.

Will installing Microsoft office on my mac air 2gb 64mb slow my system down, I don't have music or big files currently on my device?

If I install Microsoft office on my mac air 2gb 64mb, will it slow my system down? I also have a macbook pro that i dont take out the house with Microsoft office already installed. Am I best to install Pages on the mac air or will it cause compatibility issues when working on files between the two devices?
Any help appreciated

The big question I have is this: is it your intention to work on the same documents on both the MacBook Air and MacBook Pro? If so, I strongly suggest that you pick one program and use it on both. Pages and Word are both good word processors but they really are not compatible - rather Pages can read Word files and be forced to create Word files. But the reading and writing isn't perfect and sometimes the amount of work required to re-edit a translated file is substantial.
Installing Office on the MacBook Air isn't going to slow it down unless your hard drive is already very full and Word should run okay on it (though you might not be able to run Word at the same time as you run other programs).

Consequences of installing G5 Leopard on Intel Mac?

I bought an Intel iMac off of eBay, and it came shipped with OS X 10.4. I had a non-retail replacement DVD of 10.5 from when I had an AppleCare problem with my iMac G5, so I tried to use that disc to upgrade my OS. It never worked correctly, and on the Apple forums I was told that the replacement DVD would be hardware-specific and not function.
However, a new phenomenon has occurred.. If I completely install Tiger with the hardware-specific discs that came with my intel Mac, and then simply upgrade to Leopard- the install succeeds and the computer is ESSENTIALLY functional.
It's not perfect though. What I've observed is that (today was the 2nd time this has happened) after a couple days of untinterrupted use (including powering down/up) and having a seemingly functional iMac-- everything goes very wrong. The computer slows down to a crawl, so I leave it alone; then when the beachball goes away, I try to click something. No matter what App I choose, it will freeze up once it begins, and everything I click suddenly stops working.
So do you think this is a consequence of installing a leopard disc with G5 architecture, or that these symptoms are indicative of something wrong with the iMac itself (possibly bad RAM?). What seems strange is the install does succeed with the upgrade, and the computer works great for a good while- and then suddenly stops. One thing that always confuses/annoys me is when computers aren't consistent... I mean, theyre computers!
Please share your thoughts, thank you!

In short: A PPC Mac cannot boot an Intel version of OS X and vice-versa. You will need a full retail version of Leopard that can install either the PPC or the Intel version of OS X. Or as you have discovered your Upgrade disc will install an Intel upgrade to an Intel version of Tiger or a PPC upgrade to a PPC version of Tiger, but it will not performa a full Erase and Install.
As for migrating from a G5 to an Intel Mac see the following:
A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Installing Photoshop 6.0 for Mac on new computer

My 2007 MacBookPro crashed, bought a new one and I'm trying to install my old Adobe Photoshop 6.0. When I install the CD I get a message "You can't open the application Install Adobe Photoshop 6.0 because the Classic environment is no longer supported". I called Adobe but they say they no longer provide that version and basically can't help. Does anyone know how to get around this problem?
Thanks/Tom

Unfortunately, you'll need to buy a new or more-current version of Adobe's Creative Suite or PhotoShop Elements for Macs. PhotoShop 6 was designed to run on the PowerPC processor-based Macs that could boot from either OS X or OS 9, or could only boot OS X, but could run OS 9 applications in the Classic environment. I don't understand how you were able to install this software on your 2007 version MacBook Pro, since it (like your new laptop) had an Intel processor. The capability of a 2007-vintage Mac to support OS 9.2.2 in a Classic environment was not supported.

Can be possible install snow leopard on my PowerPC G5 PowerMac 4x2.5GHz PowerPc G5

can be possible install snow leopard on my PowerPC G5 PowerMac 4x2.5GHz PowerPc G5 QUAD 8GB RAM

Be sure to read
https://discussions.apple.com/docs/DOC-2295
If you decide to get an Intel Mac. As migrating data is not straight forward.

Installing a dual processor

Is it possible to drop in a dual 1.25ghz chip into a G4 "born" with a single core? I have a G4 single 1.25ghz MDD and see dual 1.25ghz chips on ebay all the time. Are the mobo's different?

Hi there and Welcome to Forums!
In answer to your question, I first need to know what MDD or MDD FW800 you have. There are two versions of the MDD, first is a 133mhz bus model and the 2nd, a 167mhz bus model. Since you have a single 1.25ghz MDD model logicboard, the answer is that you can install any dual processor you would like. What I mean is a dual 1.25 or a dual 1.42 + any of the sonnet processor upgrades of dual 1.6 and dual 1.8. For all purposes, I would go with the dual 1.25 since there really isn't much difference in speed and performance compared to the dual 1.42.
Also, you should consider replacing the heatsink with the copper one from a dual 1.42 MDD. These can be had on ebay or on www.mac-pro.com
The only mobo's that are different are the FW800 ones which are similar to the standard FW400 MDD's except for a FW800 connector, bluetooth, and airport extreme. The original and 2003 models of the FW400 based MDDs have the ability to boot into OS 9.2.2 natively while the FW800 can't. The FW400 models have no bluetooth, and only work with the original airport only. But, you can get a Belkin F5D7001 PCI wireless card which will allow your mac to access the internet at airport extreme speeds.

I have Logic on my iMac and want to install it on my new mac book but my mac book doesn't have a dvd drive. I tried to download the upgrade but it looks for an older version. How do I get Logic on the Mac book ?

I would like to install logic on my new mac book but there is no dvd drive. I tried to downlaod the upgrade but that didn't work. How do I download it for the first time?
Thanks!

You can only use the App Store version to reinstall on your new Mac if you bought Logic via the App Store in the first place.... and then it will appear under the Purchases tab in the Mac App Store App so long as you are signed in using the same Apple ID you used to purchase Logic via the App store in the first place.
If you bought the DVD edition of Logic Studio then you must initially install using those original DVDs to begin with and then update to the latest version of your version of Logic via software updates.
No DVD drive? Buy an external one.. Amazon do a very cheap basic one that works well..
or...
Use Remote Disk if you still have your older Mac which has a built in DVD drive...
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

HT1338 I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system?

I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.

Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there.

Install G4 933mhz processor in Mac Beige Powermac G3

Similar Messages

Maybe you are looking for