Install Grid 11gr2 on VWMARE
Hi,
Can someone help me to clarify the installation procedure ...
I marked 5 volumes on each node with oracleasm createdisk..
How Many Volumes Do I need to check for the DATA Diskgroup if I want to use ASM for OCR and voting?
could the Vmware shared disk be marked and used by ASM for the 11gr2 Grid infra?
Regards
Jo
You need a minimum of 3 disks for OCR/Vote (unless you choose external redundancy - wherein you would need one). Yes, you could use the VMWare shared disk as far as it is writable from all participating nodes.
Similar Messages
-
Oracle 11gR2 RAC : How to resume runInstaller to continue to install Grid ?
Folks,
Hello.
I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer.
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
After finish running the script root.sh in VM rac1 and rac2, the Computer is shut down automaticall because I don't touch the keyboad for a long time. When I resume the Computer, runInstaller Wizard is gone. My question is:
How to resume runInstaller to continue to install Grid ?
Thanks.Hi!
You can't resume runInstaller.
You must Clear you envinronment, and try again. -
Cannot Startup Grid in 11gR2 RAC after Install Grid Successfully
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6 according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
Grid and RAC database have been installed successfully for both VMs rac1 and rac2.
I am using the slave VM rac2 to test Grid and RAC database because rac1 disk is full.
The problem is that OCR file is not available or currupted in the slave VM rac2.
I have created a pfile and add entry in the file sqlnet.ora in the slave VM rac2. By now, I still cannot startup Grid as below:
[ora11g@rac2 /]$ cd u01/app/grid/bin/
[ora11g@rac2 bin]$ crsctl status resource
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
[ora11g@rac2 bin]$ cd /u02/11g_db/ora11g/racdb/bin
[ora11g@rac2 bin]$ srvctl config database -d racdb
PRCD-1027 : Failed to retrieve database racdb
PRCR-1070 : Failed to check if resource ora.racdb.db is registered
Cannot communicate with crsd
[ora11g@rac2 bin]$
[ora11g@rac2 ~]$ cd /u01/app/grid/bin
[ora11g@rac2 bin]$ export ORACLE_SID=+ASM2
[ora11g@rac2 bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Mon Mar 26 12:40:35 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u02/11g_db/ora11g/racdb/dbs/init+ASM2.ora'
SQL>
I have checked that there is no the file init+ASM2.ora in the directory '/u02/11g_db/ora11g/dbs'.
As we see the outputs above, my question is:
Can any folk help to solve the issue to start up Grid ?
Thanks.Folks,
Hello. Thanks a lot for replying. Let's analyze 3 cases as follows:
Case 1:
If don't export ORACLE_SID=+ASM2, the output is below:
[ora11g@rac2 /]$ cd u01/app/grid/bin
[ora11g@rac2 bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:31:35 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/racdb/spfileracdb.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/racdb/spfileracdb.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
SQL> startup pfile='/u01/app/grid/dbs/pfile'
ORA-01031: insufficient privileges
SQL>
Case 2:
If export ORACLE_SID=+ASM2, the output is below:
[ora11g@rac2 bin]$ export ORACLE_SID=+ASM2
[ora11g@rac2 bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:41:33 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u02/11g_db/ora11g/racdb/dbs/init+ASM2.ora'
SQL> startup pfile='/u01/app/grid/dbs/pfile'
ORA-01031: insufficient privileges
SQL>
Case 3:
Now, as you indicated, I export ORACLE_SID=racdb2, the output is below:
[ora11g@rac2 bin]$ pwd
/u01/app/grid/bin
[ora11g@rac2 bin]$ export ORACLE_SID=racdb2
[ora11g@rac2 bin]$ ./sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Mar 27 12:33:48 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/racdb/spfileracdb.ora'
ORA-17503: ksfdopn:2 Failed to open file +DATA/racdb/spfileracdb.ora
ORA-15077: could not locate ASM instance serving a required diskgroup
SQL> startup pfile='/u01/app/grid/dbs/pfile'
ORA-01031: insufficient privileges
SQL>
As we see the ouputs above, export ORACLE_SID=racdb2 doesn't have any effect. My question is:
Can any folk help to solve the above 3 issues to start up Grid ?
Thanks. -
Installing Grid Infrastructure 11gR2 on a 2nodes cluster: device names req.
Hello, I am trying to install Grid Infrastructure 11gR2 on 2 sun nodes (Solaris 10) in order to try the product. but I am finding an error on the second node. After installing the software on both nodes and executing root.sh in the first node, the second node is complaining about the device I have defined for OCR, voting and ASM (the easiest scenary, 1 diskgroup for OCR, voting and ASM with 1 disk ) :
DiskGroup conf_dg creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/dev/rdsk/c5t500601603CE02E8Ed20s0' matches no disks
I have realised this device has not the same name on both nodes as boxes are different; the device name in the second system is
c2t500601673CE02E8Ed20s0
This is slice 0 of and EMC Clariion LUN. As this info is recorded at the crsconfig_params file in both nodes and is the same, should the device names be the same on the N nodes of a Clusterware cluster? How should I do to correct the installation of the second node?
Thanks in advance.Hi Gurus,
I have similar problems on very first node1, it cannot create the diskgroup when running the root.sh. here is my configuration
two guest ldoms running sol 10 update10 on sparc t5120 and sharing iscsi Luns provided by third ldom ( created zfs volumes and set shareiscsi on)
all the permissions are 777 on /dev/rdsk/c1t*d0s1 and ownership grid:oinstall.
using solaris.sparc64_11gR2_grid.zip
I have installed 11gr2 rac for x86 using similar configuration with all x86 machines. but I cannot install using sparc as mentioned above. I have put some logs here
much appreciated for you help.
Thanks.
[main] [ 2012-09-11 03:43:10.363 EDT ] [SQLEngine.doSQLSubstitution:2373] The substituted sql statement:=select count(*) from v$ASM_DISKGROUP where name=upper('crsdg')
[main] [ 2012-09-11 03:43:11.070 EDT ] [UsmcaLogger.logInfo:141] CREATE DISKGROUP SQL: CREATE DISKGROUP crsdg EXTERNAL REDUNDANCY DISK '/dev/rdsk/c1t12d0s1',
'/dev/rdsk/c1t8d0s1',
'/dev/rdsk/c1t6d0s1',
'/dev/rdsk/c1t9d0s1' ATTRIBUTE 'compatible.asm'='11.2.0.0.0'
[main] [ 2012-09-11 03:44:02.639 EDT ] [SQLEngine.done:2148] Done called
[main] [ 2012-09-11 03:44:02.645 EDT ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:createDiskGroups
[main] [ 2012-09-11 03:44:02.647 EDT ] [UsmcaLogger.logException:172] ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
[main] [ 2012-09-11 03:44:02.649 EDT ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1898)
oracle.sysman.assistants.usmca.backend.USMDiskGroupManager.createDiskGroups(USMDiskGroupManager.java:235) -
How to install oracle 11gR2 Grid Infrastructure for standalond server
Hi Experts,
we do not want to install ASM. under this condition, does any expert install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5 at file system?
Please share tip and experiences of installed oracle 11gR2 as single instance include install oracle 11gR2 Grid Infrastructure for standalone server in Linux 5. no one node RAC configuration.
If we do not install 11gR2 Grid Infrastructure for standalone server . which function will be lost? restat server only?
Thanks
JimGrid Infrastructure automatically uses Oracle Restart as default if you're installing Standalone. You can turn this off using crsctl ('disable has', I believe).
According to the inference in the install docs (http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/oraclerestart.htm#CIHCBGCC), you can install 11gR2 without Grid Infrastructure, but you lose ASM and Restart. -
Install Oracle 11gr2 on Windows 2008 R2 with ASM step by step Guide needed
Hi,
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.
Thanks in advance.
SujithHi Sujith;
I am looking for a step by step guide on installing Oracle 11gr2 on Windows 2008 R2 with ASM etc. This is not a RAC environment since ASM architecture is a bit different in 11gR2, I would appreciate if anyone can point me to a guide to follow or provide a one.You need to install grid first(Software only) its neccessary for ASM, Than you need to use asmca to create asm disks than you need to install 11gr2
All doc avaliable at:
http://www.oracle.com/pls/db112/homepage
Regard
Helios -
Installing Oracle 11gR2 RAC issue
I am installing Oracle 11gR2(11.2.0.3) RAC on RHEL 5.6. I am facing "TCP connectivity check failed" on my precheck using CVU
Interface information for node "hublpr4"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 172.16.34.71 172.16.32.0 0.0.0.0 172.16.32.4 00:17:A4:77:08:10 1500
eth1 192.168.10.3 192.168.10.0 0.0.0.0 172.16.32.4 00:17:A4:77:08:12 1500
Interface information for node "hublpr3"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
eth0 172.16.34.69 172.16.32.0 0.0.0.0 172.16.32.4 00:17:A4:77:0C:30 1500
eth1 192.168.10.2 192.168.10.0 0.0.0.0 172.16.32.4 00:17:A4:77:0C:32 1500
Check: Node connectivity of subnet "172.16.32.0"
Source Destination Connected?
hublpr4[172.16.34.71] hublpr3[172.16.34.69] yes
Result: Node connectivity passed for subnet "172.16.32.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "172.16.32.0"
Source Destination Connected?
hublpr3:172.16.34.69 hublpr4:172.16.34.71 failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 172.16.34.69" and "hublpr4 : 172.16.34.71" failed
Result: TCP connectivity check failed for subnet "172.16.32.0"
Check: Node connectivity of subnet "192.168.10.0"
Source Destination Connected?
hublpr4[192.168.10.3] hublpr3[192.168.10.2] yes
Result: Node connectivity passed for subnet "192.168.10.0" with node(s) hublpr4,hublpr3
Check: TCP connectivity of subnet "192.168.10.0"
Source Destination Connected?
hublpr3:192.168.10.2 hublpr4:192.168.10.3 failed
ERROR:
PRVF-7617 : Node connectivity between "hublpr3 : 192.168.10.2" and "hublpr4 : 192.168.10.3" failed
Result: TCP connectivity check failed for subnet "192.168.10.0"
Interfaces found on subnet "172.16.32.0" that are likely candidates for VIP are:
hublpr4 eth0:172.16.34.71
hublpr3 eth0:172.16.34.69
WARNING:
Could not find a suitable set of interfaces for the private interconnect
Checking subnet mask consistency...
Subnet mask consistency check passed for subnet "172.16.32.0".
Subnet mask consistency check passed for subnet "192.168.10.0".
Subnet mask consistency check passed.
Result: Node connectivity check failed
Checking multicast communication...
Checking subnet "172.16.32.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "172.16.32.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.71" on node "hublpr4" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.71" on node "hublpr4"
PRVG-11134 : Interface "172.16.34.69" on node "hublpr3" is not able to communicate with interface "172.16.34.69" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "230.0.1.0"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
Checking subnet "192.168.10.0" for multicast communication with multicast group "224.0.0.251"...
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.3" on node "hublpr4" is not able to communicate with interface "192.168.10.2" on node "hublpr3"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.3" on node "hublpr4"
PRVG-11134 : Interface "192.168.10.2" on node "hublpr3" is not able to communicate with interface "192.168.10.2" on node "hublpr3"Try following metalink note for sorting out multicast issues.
Oracle Grid Infrastructure 11.2.0.2 Installation or Upgrade may fail due to Multicasting Requirement [ID 1212703.1] -
I am attempting to install Oracle DB RAC Grid Infrastructure 11gR2 on Solaris 10 Containers and am getting ASM PRVF-5150 error. After doing some search internally/externally, I found something like: .." the prerequisite check for Oracle ASM devices reports an error (with PRVF-5150) that the given disk is not a valid path. Workaround: This error can be ignored."
I have 2 T2000's, Oracle Solaris 10 9/10 s10s_u9wos_14a, 144488-12, Solaris Whole-Root Zone, and Sun StorEdge 3320 (SCSI shared disk array). I have installed Grid 11.2.0.1 in the same environment and I didn't get PRVF-5150 error. Attempting to install 11.2.0.2 would consistently produce the error.
My shared device can be seen from both nodes (and as mentioned 11gR1 was successfully installed/configured/deconfigured). cluvfy.sh also passed.
crw-rw---- 1 grid asmadmin 32, 4 Jul 18 14:58 /dev/rdsk/c2t0d0s4
If I were to ignore it and continue, I get the following error:
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9349: Unable to configure driver 'oracleadvm'.
ACFS-9310: ADVM/ACFS installation failed.
USM driver install actions failed
Oracle DB and RAC 11gR2 has been certified on Solaris 10 Containers.
Any suggestion is appreciated. Thanks in advance.Hi,
You can use this tech note on MOS.
*Troubleshooting 11.2 Grid Infastructure Installation Root.sh Issues [ID 1053970.1]*
Put here alertlog file of grid
Please use formatting options using tags output between tags[/code ]
Regards,
Levi Pereira
Edited by: Levi Pereira on Jul 19, 2011 12:24 PM -
Installing GI 11gR2 11.2.0.3 on RHEL5U6
Hi,
Would like to find out if anyone has successfully implemented GI 11gR2 11.2.0.3 on RHEL5U6 with SAN storage? My team is trying to install this and we are encountering issues.
Would like to know, what's your configuration like for udev rules.d, multipath.conf or other files which you had to configure? Do you use "dm-xx" or the WWID?
We have tried using WWID and successfully installed GI. However, after we rebooted the servers, the ASM crashed.
Thanks in advance!Hello,
I recently install Grid Infrastructure 11.2.0.2 on RHEL5U5. Ihad it working with multipath. Since the SAN was an EMC I opted to use powerpath out of preference afterwards.
As long as you have your partitions created then you should have no problem creating you ASM disks. Please follow the Support Note: [ID 602952.1].
When using mirroring, make sure change the scan order of the devices and opt to leave out any sd. In your case you would put "mpath dm" instead of "emcpower"
In otherwords:
[root@ oraprdrmn1]# vi /etc/sysconfig/oracleasm
ORACLEASM_SCANORDER="emcpower"
ORACLEASM_SCANEXCLUDE="sd"Jan -
NTP(Network Time Protocol) Error whil installing Oracle 11gR2 RAC
Dear Friends,
I have installed oracle 11gr2 clusterware software in two node RAC. While i run the CLUVFY.SH, It shows error in NTP configuration.
1)I add "-x" parameter in "/etc/sysconfig/ntp" configuration file. and start the ntpd service and run the cluvfy.sh . then i got the below error.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 no
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
=============================================================================================
2)Down the ntpd service in both nodes and run the CLUVFY.SH.
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 no
rac1 yes
Result: Liveness check failed for "ntpd"
PRVF-5415 : Check to see if NTP daemon is running failed
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
Post-check for cluster services setup was unsuccessful on all the nodes.
==========================================================================
3)Based on some website advice, I down the ntpd service and move the "/etc/ntpd.conf" to another location.Then i got the below error.
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
ERROR:
PRVF-5402 : Warning: Could not find NTP configuration file "/etc/ntp.conf" on node "rac2"
PRVF-5405 : The NTP configuration file "/etc/ntp.conf" does not exist on all nodes
rac2
PRVF-5414 : Check of NTP Config file failed on all nodes. Cannot proceed further for the NTP tests
Result: Clock synchronization check using Network Time Protocol(NTP) failed
PRVF-9652 : Cluster Time Synchronization Services check failed
=============================================================
What should i do to solve this issue?? Please help me ...Hi,
I start the ntpd start the service in both node and done the CLUVFY.SH.
The output is below,
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
rac2 passed
rac1 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
rac2 Observer
rac1 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
The NTP configuration file "/etc/ntp.conf" is available on all nodes
NTP Configuration file check passed
Checking daemon liveness...
Check: Liveness for "ntpd"
Node Name Running?
rac2 yes
rac1 yes
Result: Liveness check passed for "ntpd"
Checking NTP daemon command line for slewing option "-x"
Check: NTP daemon command line
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon slewing option check passed
Checking NTP daemon's boot time configuration, in file "/etc/sysconfig/ntpd", for slewing option "-x"
Check: NTP daemon's boot time configuration
Node Name Slewing Option Set?
rac2 yes
rac1 yes
Result:
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
========================================================================================
[oracle@rac1 ~]$ /u01/app/grid/oracle/product/10.2.0/db_1/bin/cluvfy comp clocksync
Verifying Clock Synchronization across the cluster nodes
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
CTSS resource check passed
Querying CTSS for time offset on all nodes...
Query of CTSS for time offset passed
Check CTSS state started...
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
NTP Configuration file check started...
NTP Configuration file check passed
Checking daemon liveness...
Liveness check passed for "ntpd"
NTP daemon slewing option check passed
NTP daemon's boot time configuration check for slewing option passed
NTP common Time Server Check started...
PRVF-5410 : Check of common NTP Time Server failed
PRVF-5416 : Query of NTP daemon failed on all nodes
Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Verification of Clock Synchronization across the cluster nodes was successful.
[oracle@rac1 ~]$
================================================================================
I hope the problem solved. Am i correct?? -
hi,
this is malli,
i got below error while installing grid software in rac.
os versin redhat 11inux 5.5
oracle 11gr2 cluster rac
thanks in advance....please do needful
Failed to start the Clusterware. Last 20 lines of the alert log follow:
2014-12-24 01:05:40.100
[client(3850)]CRS-2101:The OLR was formatted using version 3.
2014-12-24 01:05:41.923
[client(3852)]CRS-2317:Fatal error: cannot get local GPnP security keys (wallet).
2014-12-24 01:05:41.923
[client(3852)]CRS-2316:Fatal error: cannot initialize GPnP, CLSGPNP_ERR (Generic GPnP error).
2014-12-24 01:05:41.954
[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.[client(3852)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/11.2.0/grid_home/log/lnx01/client/clscfg.log.
Have you looked in this log file to see why the OCR is inaccessible? Have you looked in the ASM instance's alert log for other clues?
Cheers,
Brian -
Install grid infrastructure + ntp server
Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?
Thanks.user12064507 wrote:
Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?Ask your network guys to tell you that if the IP is not is not in your LAN, to where it belongs. They are the best people to ask it.
Aman.... -
Try to install Grid Infrastructure (ASM) 11gR2 on SUSE Linux 11. Installation went through well untill the very last steps. The message indicated:
Configure Oracle Grid Infrastructure for Standalone Server -- failed
*Automatic Storage Management Configuration Assistant failed. --failed.*
What could be the solution?The log does state: Successfully configured Oracle Grid Infrastructure for a Standalone Server
Then it moves on to configure 'Automatic Storage Management Configuration Assistant'
There it says:
Starting 'Automatic Storage Management Configuration Assistant'
Error while detecting Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure to configure ASM.
It sounds like that Oracle Grid Infrastructure for a Standalone Server was indeed successfully configured. However, for some reason the ASMCA could not find it.
Next, I did the following:
. oraenv
ORACLE_SID = [oracle] ? +ASM
ORACLE_HOME ...
asmca
The ASMCA GUI windows opened.
After I enter the required info, then click on Create ASM button, this is what it displyed:
Oracle Grid Infrastructure is not configured properly. ASMCA needs Oracle Grid Infrastructure to configure ASM.
What could be wrong? -
Install Oracle 11gR2 RAC : Cannot remove directory bootstrap under /tmp
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a "
In order to fix the above error, I run "cluster verification utility" according to
http://docs.oracle.com/cd/E14072_01/rac.112/e10717/cvu.htm I run the following command:
[ora11g@rac1 \]$ /home_grid/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose
Output:
/bin/rm: cannot remove directory '/tmp/bootstrap': Operation not permitted
./runcluvfy.sh:line 99:/tmp/bootstrap/ouibootstrap.log: permission denied
From the above output, we can see the directory bootstrap under /tmp causes the problem. The solution is to remove the directory bootstrap. I run the 2 commands:
[ora11g@rac1 tmp]$ rmdir bootstrap
Output: Operation not permitted
[ora11g@rac1 tmp]$ rm -rf bootstrap
Output: cannot remove bootstrap: Operation not permitted.
[ora11g@rac2 tmp]$ ls
Output: there is no 'bootstrap' directory.
My questions are:
First, does "cannot remove boostrap in rac1" cause that /tmp in rac2 could not be determine mount point ?
Second, can any folk help to remove the directory bootstrap under /tmp ?
Thanks.Folks,
Hello. Thanks a lot for replying. I have just run the 2 commands:
[root@rac2 \]# chown -R ora11g:dba /u01
[root@rac2 \]# chmod -R 775 /u01
ora11g is the user who installs the Grid and /u01 is the directory where Grid is installed and dba is the group.
I go back to Grid Installer Step 7 of 10 in rac1 and check again and see as below:
Free Space: Rac2 : /tmp
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available
Expected Value: n/a
Actual Value: n/a
The problem is not solved after run the above 2 commands in rac2.
In addition, I have run Cluster Verification Utility using the command:
[ora11g@rac1 grid]./runcluvfy.sh stage -pre crsinst -n rac1,rac2 -r 11gR2 -orainv ora11g -verbose
Output: All of items for rac2 are passed. There is only one item for rac1 is failed as below:
Check default user file creation mask:
NodeName: rac1
Available: 0002
Required: 0022
Comment: failed
As we see above, the result of CVU command is not the same with Grid Installer step 7 of 10 (Installation Environment Verification):
CVU command doesn't find /tmp mount point problem for rac2 that Grid Installer does.
Grid Installer step 7 of 10 doesn't find user file creation mask problem for rac1 that CVU command does.
I have tried to find out whether creation mask failed for rac1 causes /tmp problem for rac2. I have changed the line "umask 002" to "umask 0022" for rac1 in each of the 3 files below and run CVU command each time for each file:
rac1:
/etc/bashrc
/etc/profile
/etc/csh.cshrc
But chang the line "umask 002" to "umask 0022" for rac1 in each of the above 3 files does not solve the problem.
My questions are:
First, why is the result of CVU command not the same with that of Grid Installer step 7 of 10 ?
Second, why change the line "umask 002" to "umask 0022" in 3 files can't solve creation mask problem for rac1 ?
Third, how to solve /tmp problem for rac2 and creation mask problem for rac1 ?
Thanks. -
Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
h2. Install Oracle 11gR2 Express Edition on Ubuntu Linux 11.04 (64-bit) Howto
Version: B
Author: Dude, 24. May 2011
The following are step by step instructions how to install Oracle 11gR2 Express Edition (Beta) under Linux Ubuntu 11.04, 64-bit.
Access to the Internet is required.
The instructions cover the following additional topics:
- Converting Red Hat based Oracle XE installer to Ubuntu.
- Work-around for missing /sbin/chkconfig tool.
- Install Oracle XE into a different directory or disk volume.
- Relocate and configure the Oracle user and default login directory.
- Uninstall, reconfigure and perform first database backup.
- Notes and web links.
- Troubleshooting
h3. A) System Setup and Prerequisites
h4. A.1. System Access
You will need terminal command line, root and system console access to perform the setup tasks.
To open a Terminal at the system console:
Menu Applications > Accessories > TerminalThe following commands will enable remote ssh login with root access:
sudo apt-get install openssh-server
sudo passwd root
Verify:
ssh root@xe_server_host_nameh4. A.2. Software Prerequisites
The following is required in order to install Oracle 11gR2 XE:
sudo apt-get install alien libaio1 unixodbcThe following is not required, but it will fix backspace and arrow keys in case you prefer using the vi-editor:
sudo apt-get install vimh4. A.3. System Swap space
Minimum swap space required is 2 GB. You can increase swap space if necessary using a swap file:
To analyze current swap space and memory configuration:
sudo cat /proc/meminfo
To install a 1 GB swapfile named swapfile in /, for example:
sudo dd if=/dev/zero of=/swapfile bs=1024 count=1048576
(this may take a while)
sudo mkswap /swapfile
sudo swapon /swapfile
sudo cp /etc/fstab /etc/fstab.orig
sudo echo '/swapfile swap swap defaults 0 0' >> /etc/fstab
Verify:
sudo swapon -a
sudo swapon -sh4. A.4. Kernel Parameters
Oracle 11g XE requires the following additional kernel parameters:
sudo nano /etc/sysctl.d/60-oracle.conf
(Enter the following)
# Oracle 11g XE kernel parameters
fs.file-max=6815744
net.ipv4.ip_local_port_range=9000 65000
kernel.sem=250 32000 100 128
kernel.shmmax=536870912
(Save the file)
Note: kernel.shmmax = max possible value, e.g. size of physical RAM.
Verify: sudo cat /etc/sysctl.d/60-oracle.conf
Load new kernel parameters:
sudo service procps start
Verify:
sudo sysctl -q fs.file-max
-> fs.file-max = 6815744h4. A.5. Oracle Installation Directory
The current Oracle Installation Guide uses the same directory like in previous versions: /usr/lib/oracle/xe/app/oracle/product/11.2.0/server. However, the current Beta installation uses Oracle Flexible Architecture (OFA) and installs into /u01/app/oracle/product/11.2.0/xe. Due to size limitations of Oracle XE it may not be necessary to store the installation to a specific directory or separate volume, but it is possible:
Install Oracle XE to separate disk volume:
From the system console menu: System > Administration > Disk Utility
Select "ext3" filesystem for Oracle compatibility and specify a Volume label, e.g. Oracle.
Notice the device name e.g. /dev/sdb
Get the drive UUID:
sudo blkid
e.g. /dev/sdb: UUID="d19a2d8f-da43-4802-8bdb-0703c855e23a"
Modify /etc/fstab to automatically mount the volume at system startup:
sudo cp /etc/fstab /etc/fstab.original
sudo nano /etc/fstab
(Add the following, using determined UUID, for exmple)
UUID=d19a2d8f-da43-4802-8bdb-0703c855e23a /u01 ext3 defaults,errors=remount-ro 0 1
(Save the file)
Create the mount-point, mount the new volume and set ownership and privileges:
sudo mkdir /u01
sudo mount -a
sudo chown root:root /u01
sudo chmod 755 /u01
Verify:
df -h
or restart the systemYou can also install Oracle XE into a specific directory:
Create a symbolic link to store the installation into an existing directory, for instance:
sudo mkdir /home/oracle-xe
sudo ln -s /home/oracle-xe /u01h3. C) Oracle 11g XE Download and Installation
h4. C.1. Download and convert the Installer from Red Hat to Ubuntu
Please see section E.3. to download the Oracle 11gR2 XE installer.
Select the version listed for Linux x64.
sudo unzip linux.x64_11gR2_OracleXE.zip
sudo alien --to-deb --scripts oracle-xe-11.2.0-0.5.x86_64.rpm
(This may take a while)h4. C.2. Create a special chkconfig script
The Red Hat based installer of Oracle XE 11gR2 beta relies on +/sbin/chkconfig+, which is not used in Ubuntu. The chkconfig package available for the current version of Ubuntu produces errors and my not be safe to use. Below is a simple trick to get around the problem and install Oracle XE successfully:
Create /sbin/chconfig:
sudo nano /sbin/chkconfig
(Cut and paste the following)
#!/bin/bash
# Oracle 11gR2 XE installer chkconfig hack for Debian by Dude
file=/etc/init.d/oracle-xe
if [[ ! `tail -n1 $file | grep INIT` ]]; then
echo >> $file
echo '### BEGIN INIT INFO' >> $file
echo '# Provides: OracleXE' >> $file
echo '# Required-Start: $remote_fs $syslog' >> $file
echo '# Required-Stop: $remote_fs $syslog' >> $file
echo '# Default-Start: 2 3 4 5' >> $file
echo '# Default-Stop: 0 1 6' >> $file
echo '# Short-Description: Oracle 11g Express Edition' >> $file
echo '### END INIT INFO' >> $file
fi
update-rc.d oracle-xe defaults 80 01
(Save the file)
Set appropriate execute privileges:
chmod 755 /sbin/chkconfig
Note: You should remove the /sbin/chkconfig file after successful installation of Oracle XE.
h4. C.3. Install and configure Oracle XE
sudo dpkg --install ./oracle-xe_11.2.0-1.5_amd64.deb
/etc/init.d/oracle-xe configure
(This will take a while)
Remove the /sbin/chkconfig script, which is no longer needed.
sudo rm /sbin/chkconfigh4. C.4. Relocate and Configure the Oracle user login
The Oracle XE installer specifies /u01/app/oracle as the login directory for the Oracle user. Although not really necessary, the following will relocate the Oracle user $HOME to a standard location and create standard /etc/skel login files:
Exit all Oracle user sessions:
sudo /etc/init.d/oracle-xe stop
sudo kill -9 `ps -ef | grep oracle | grep -v grep | awk '{print $2}'`
sudo userdel oracle
sudo useradd -s /bin/bash -G dba -g dba -m oracle
sudo passwd oracle
Verify:
sudo id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba)h4. C.5. Setup Oracle environment variables
In order to use sqlplus and other tools, the Oracle account requires certain environment variables. The following will set these variables automatically at every interactive Oracle login:
sudo echo '. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh' >> /home/oracle/.bashrch4. C.6. Oracle sudo root access
It is not essential to allow the Oracle user to use sudo, but it is convenient:
usermod -G admin oracle
Verify:
id oracle
-> uid=1001(oracle) gid=1001(dba) groups=1001(dba),120(admin)
sudo su -
-> Enter Oracle account passwordh4. C.7. Oracle 11g XE Post-installation
After you install Oracle Database XE, its graphical user interface is only available from the local server, but not remotely.
The following will correct the problem if necessary:
Login as user Oracle or use:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following command:
EXEC DBMS_XDB.SETLISTENERLOCALACCESS(FALSE);
exith3. D) Unintstall, Reconfigure and Troubleshooting
h4. D.1. Uninstall Oracle 11g XE
The following will completely uninstall and remove Oracle 11g XE:
Login as user root:
sudo su -
/etc/init.d/oracle-xe stop
dpkg --purge oracle-xe
rm -r /u01/app
rm /etc/default/oracle-xe
update-rc.d -f oracle-xe removeh4. D.2. Reconfigure Oracle 11g XE
Type the following in a terminal window:
/etc/init.d/oracle-xe stop
sudo rm /etc/default/oracle-xe
/etc/init.d/oracle-xe configureh4. D.3. Enable Archivelog mode and perform a database backup
Login as user Oracle:
su - oracle
sqlplus / as sysdba
At the SQL prompt, enter the following commands:
shutdown immediate
startup mount
alter database archivelog;
alter database open;
exit
Login to system console of the Oracle user account:
Select Applications > Oracle Database 11g Express Edition > Backup Databaseh3. E) Notes
h4. E.1. Oracle 11g XE limitiations overview
- It will consume, at most, processing resources equivalent to one CPU.
- Only one installation of Oracle Database XE can be performed on a single computer.
- The maximum amount of user data in an Oracle Database XE database cannot exceed 11 GB.
- The maximum amount of RAM that Oracle XE uses cannot exceed 1 GB, even if more is available.
- HTTPS is not supported natively with the HTTP listener built into Oracle Database XE.
h4. E.2. Documentation and Links
Official documentation for Oracle 11gR2 XE can be found at:
http://www.oracle.com/pls/xe112/homepage
h4. E.3. Oracle 11g XE downloads
The Installer is available from the Oracle Technology Network at:
http://www.oracle.com/technology/products/database/xe
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
h4. E.4 APEX links and archives
The APEX archives can be found at:
http://www.oracle.com/technetwork/developer-tools/apex/application-express/all-archives-099381.html
The APEX download site is:
http://www.oracle.com/technetwork/developer-tools/apex/downloads/index.html
h3. F) Troubleshooting
... in progress
Regards and best of luck!
Edited by: Dude on May 25, Version B: various corrections. chkconfig package (A.2.) not required.even though I am admin user.Admin user is a MS Windows term, that does not apply to Linux or Unix in the same fashion.
The configuration script tells you "You must be root user to run the configure script. Login as root user and
then run the configure script."
This is most likely correct because your account is not root and does not have UID 0. What you can do is to login as root e.g. sudo su -, as the message suggest, or use "sudo /etc/init.d/oracle-xe configure", provided your account is defined in the /etc/sudoers file to perform root/admin actions.
Btw, do not modify /etc/passwd and /etc/group to give you admin privileges or try to create a another root account under a different name. That's not the way it works and usually leads to nasty problems.
Maybe you are looking for
-
My itunes video's are out of sync
hey guys my music videos are out of sync------when i play them the sound always comes before the video if you know what i meen any ways to fix this cheers jack
-
Protecting PDFs from Unlicensed Sharing
Hi all, I'm aware Acrobat has many features around DRM and protecting documents from unlicensed usage. However, I want to know how scalable this is...for instance, if I'm selling training materials in PDF format, and someone purchases the materials t
-
Lost my apps when sync iPad with iTunes
when sync iPad with iTunes, apps purchased in iPad by another account were lost, and the apps can't be seen when check for available downloads. How to get back the purchased apps? thanks.
-
User I.d. Wrong in app store
All of a sudden my user name changed in the app store so I can no longer update or purchase apps. Don't know why or how. User name did not change anywhere else on the iPad including iTunes etc. does anyone know how to change the user name in th ap
-
Problem with some outgoing mail accounts
I have several pop accounts in Mail. On my home iMac, they use my ISP for outgoing. For example, one account is arizona.edu for incoming; it uses smtp.comcast.net for outgoing. This has worked perfectly for years. Suddenly last week, the outgoing mai