Install Grid Infrastructure

Try to install Grid Infrastructure (ASM) 11gR2 on SUSE Linux 11. Installation went through well untill the very last steps. The message indicated:
Configure Oracle Grid Infrastructure for Standalone Server -- failed
*Automatic Storage Management Configuration Assistant failed. --failed.*
What could be the solution?

The log does state: Successfully configured Oracle Grid Infrastructure for a Standalone Server
Then it moves on to configure 'Automatic Storage Management Configuration Assistant'
There it says:
Starting 'Automatic Storage Management Configuration Assistant'
Error while detecting Oracle Grid Infrastructure. ASMCA needs Oracle Grid Infrastructure to configure ASM.
It sounds like that Oracle Grid Infrastructure for a Standalone Server was indeed successfully configured. However, for some reason the ASMCA could not find it.
Next, I did the following:
. oraenv
ORACLE_SID = [oracle] ? +ASM
ORACLE_HOME ...
asmca
The ASMCA GUI windows opened.
After I enter the required info, then click on Create ASM button, this is what it displyed:
Oracle Grid Infrastructure is not configured properly. ASMCA needs Oracle Grid Infrastructure to configure ASM.
What could be wrong?

Similar Messages

Install grid infrastructure fails due to oracle net configuration a failure

hello guys,
I installed software only then tried to install grid infrastructure standalone server along with ASM then i got an error
[main] [ 2010-10-16 05:13:15.094 EET ] [RuntimeExec.runCommand:164] CRS-212: Resource 'ora.crsd' is not registered.
[main] [ 2010-10-16 05:13:15.095 EET ] [RuntimeExec.runCommand:170] RunTimeExec: error>
[main] [ 2010-10-16 05:13:15.097 EET ] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[main] [ 2010-10-16 05:13:15.104 EET ] [ConfigureListener.setListenerParam:1779] Setting ADR_BASE_LISTENER: /oracle/app/oracle
[main] [ 2010-10-16 05:13:15.284 EET ] [EndpointsImpl.<init>:276] Get listener endpoints from TCP:1521
[main] [ 2010-10-16 05:13:15.286 EET ] [EndpointsImpl.<init>:302] Token count is 1
[main] [ 2010-10-16 05:13:15.312 EET ] [EndpointsImpl.<init>:324] LsnrProtocol type = TCP, values = 1521
[main] [ 2010-10-16 05:13:15.318 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:86] Calling parseInt to check 1521
[main] [ 2010-10-16 05:13:15.319 EET ] [EndpointsImpl$LsnrProtocol.addPortValue:97] Get port number 1521
[main] [ 2010-10-16 05:13:15.469 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:15.471 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:15.472 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:15.482 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:15.486 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:15.487 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:13:15.505 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:15.527 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:15.530 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:15.533 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:15.535 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:15.536 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:13:15.581 EET ] [HASContext.<init>:100] moduleInit = 67
[main] [ 2010-10-16 05:13:15.583 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-10-16 05:13:15.590 EET ] [sPlatform.isHybrid:67] osName=Linux osArch=i386 rc=false
[main] [ 2010-10-16 05:13:15.591 EET ] [Library.load:254] Loading library /oracle/app/oracle/product/11.2.0/grid/lib/libsrvmhas11.so
[main] [ 2010-10-16 05:13:15.967 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
[main] [ 2010-10-16 05:13:16.020 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
[main] [ 2010-10-16 05:13:16.099 EET ] [Version.isPre:274] version to be checked 11.2.0.1.0 major version to check against10
[main] [ 2010-10-16 05:13:16.101 EET ] [Version.isPre:285] isPre.java: Returning FALSE
[main] [ 2010-10-16 05:13:16.102 EET ] [OCR.loadLibrary:308]
Inside constructor of OCR
[main] [ 2010-10-16 05:13:16.103 EET ] [OCR.isCluster:939] Calling OCRNative for isCluster()
[main] [ 2010-10-16 05:13:16.108 EET ] [OCR.isCluster:943] OCR Result status = true
[main] [ 2010-10-16 05:13:16.109 EET ] [OCR.isCluster:955] Bolean result = false
[main] [ 2010-10-16 05:16:25.268 EET ] [PortAvailableCommand.execute:198] Port 1521 is available on node primary.localdomain
[main] [ 2010-10-16 05:16:25.297 EET ] [NodeAppsFactoryImpl.checkPortHelper:1525] port=1521 availability status=true across nodeList=local node
[main] [ 2010-10-16 05:16:25.848 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
[main] [ 2010-10-16 05:16:25.861 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.028 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
[main] [ 2010-10-16 05:16:26.038 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.222 EET ] [CRSNativeResult.addComp:162] add comp: name ora.local_resource.type, rc 210, msg CRS-0210: Could not find resource 'ora.local_resource.type'.
[main] [ 2010-10-16 05:16:26.231 EET ] [CRSNative.isEntityRegistered:672] entity: ora.local_resource.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:26.246 EET ] [CRSNative.register:1133] About to register: name: ora.local_resource.type, type: 2, update: false, force: false
[main] [ 2010-10-16 05:16:26.384 EET ] [CRSNative.register:1141] Name: 'ALIAS_NAME', Value: ''
[main] [ 2010-10-16 05:16:26.413 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'local_resource'
[main] [ 2010-10-16 05:16:26.421 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Oracle Local Resource'
[main] [ 2010-10-16 05:16:26.427 EET ] [CRSNative.register:1141] Name: 'RESTART_ATTEMPTS', Value: '5'
[main] [ 2010-10-16 05:16:26.434 EET ] [CRSNative.register:1141] Name: 'UPTIME_THRESHOLD', Value: '1d'
[main] [ 2010-10-16 05:16:26.441 EET ] [CRSNative.register:1141] Name: 'AUTO_START', Value: 'restore'
[main] [ 2010-10-16 05:16:26.517 EET ] [CRSNative.register:1141] Name: 'ENABLED', Value: '1'
[main] [ 2010-10-16 05:16:26.531 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: ''
[main] [ 2010-10-16 05:16:26.544 EET ] [CRSNative.register:1141] Name: 'NLS_LANG', Value: ''
[main] [ 2010-10-16 05:16:26.552 EET ] [CRSNative.register:1141] Name: 'USR_ORA_ENV', Value: ''
[main] [ 2010-10-16 05:16:26.559 EET ] [CRSNative.register:1141] Name: 'START_DEPENDENCIES', Value: ''
[main] [ 2010-10-16 05:16:26.595 EET ] [CRSNative.register:1141] Name: 'STOP_DEPENDENCIES', Value: ''
[main] [ 2010-10-16 05:16:27.340 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute ENABLED to type STRING.
[main] [ 2010-10-16 05:16:27.357 EET ] [CRSNativeResult.addLine:106] callback: ora.local_resource.type true CRS-2618: Cannot change data type INT of existing attribute RESTART_ATTEMPTS to type STRING.
[main] [ 2010-10-16 05:16:28.400 EET ] [CRSNativeResult.addComp:162] add comp: name ora.listener.type, rc 210, msg CRS-0210: Could not find resource 'ora.listener.type'.
[main] [ 2010-10-16 05:16:28.419 EET ] [CRSNative.isEntityRegistered:672] entity: ora.listener.type, type: 2, registered: false
[main] [ 2010-10-16 05:16:28.431 EET ] [CRSNative.register:1133] About to register: name: ora.listener.type, type: 2, update: false, force: false
[main] [ 2010-10-16 05:16:28.440 EET ] [CRSNative.register:1141] Name: 'BASE_TYPE', Value: 'ora.local_resource.type'
[main] [ 2010-10-16 05:16:28.448 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
[main] [ 2010-10-16 05:16:28.457 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
[main] [ 2010-10-16 05:16:28.486 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
[main] [ 2010-10-16 05:16:28.495 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
[main] [ 2010-10-16 05:16:28.505 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
[main] [ 2010-10-16 05:16:28.513 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
[main] [ 2010-10-16 05:16:28.568 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
[main] [ 2010-10-16 05:16:28.577 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
[main] [ 2010-10-16 05:16:28.713 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
[main] [ 2010-10-16 05:16:28.890 EET ] [CRSNativeResult.addLine:106] callback: ora.listener.type true CRS-2618: Cannot change data type INT of existing attribute START_TIMEOUT to type STRING.
[main] [ 2010-10-16 05:16:29.688 EET ] [Util.<init>:86] Util Instance created.
[main] [ 2010-10-16 05:16:29.816 EET ] [HASContext.getCRSHome:507] /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.821 EET ] [Util.getCRSHome:542] getCRSHome: ret=/oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.834 EET ] [ListenerImpl.getOracleHomeVal:1323] crshome is /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.839 EET ] [ListenerImpl.getOracleHomeVal:1324] oraclehome is /oracle/app/oracle/product/11.2.0/grid
[main] [ 2010-10-16 05:16:29.845 EET ] [ListenerImpl.create:534] Creating Resource
[main] [ 2010-10-16 05:16:30.290 EET ] [CRSNativeResult.addComp:162] add comp: name ora.LISTENER.lsnr, rc 210, msg CRS-0210: Could not find resource 'ora.LISTENER.lsnr'.
[main] [ 2010-10-16 05:16:30.302 EET ] [CRSNative.isEntityRegistered:672] entity: ora.LISTENER.lsnr, type: 1, registered: false
[main] [ 2010-10-16 05:16:30.313 EET ] [CRSNative.register:1133] About to register: name: ora.LISTENER.lsnr, type: 1, update: false, force: false
[main] [ 2010-10-16 05:16:30.321 EET ] [CRSNative.register:1141] Name: 'TYPE', Value: 'ora.listener.type'
[main] [ 2010-10-16 05:16:30.331 EET ] [CRSNative.register:1141] Name: 'DESCRIPTION', Value: 'CRS resource type for the Listener'
[main] [ 2010-10-16 05:16:30.338 EET ] [CRSNative.register:1141] Name: 'AGENT_FILENAME', Value: '%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%'
[main] [ 2010-10-16 05:16:30.345 EET ] [CRSNative.register:1141] Name: 'ACTION_SCRIPT', Value: ''
[main] [ 2010-10-16 05:16:30.353 EET ] [CRSNative.register:1141] Name: 'ORACLE_HOME', Value: '%CRS_HOME%'
[main] [ 2010-10-16 05:16:30.360 EET ] [CRSNative.register:1141] Name: 'START_TIMEOUT', Value: '180'
[main] [ 2010-10-16 05:16:30.466 EET ] [CRSNative.register:1141] Name: 'ENDPOINTS', Value: 'TCP:1521'
[main] [ 2010-10-16 05:16:30.484 EET ] [CRSNative.register:1141] Name: 'PORT', Value: '1521'
[main] [ 2010-10-16 05:16:30.516 EET ] [CRSNative.register:1141] Name: 'USR_ORA_OPI', Value: 'false'
[main] [ 2010-10-16 05:16:30.526 EET ] [CRSNative.register:1141] Name: 'DEFAULT_TEMPLATE', Value: 'PROPERTY(RESOURCE_CLASS=listener) PROPERTY(LISTENER_NAME=PARSE(%NAME%, ., 2))'
[main] [ 2010-10-16 05:16:30.538 EET ] [CRSNative.register:1141] Name: 'VERSION', Value: '11.2.0.1.0'
[main] [ 2010-10-16 05:16:31.184 EET ] [ConfigureListener.isPortFree:1010] Checking if port 1521 is free on local machine...
[main] [ 2010-10-16 05:16:31.195 EET ] [ConfigureListener.isPortFree:1023] InetAddress.getByName(127.0.0.1): /127.0.0.1
[main] [ 2010-10-16 05:16:31.219 EET ] [ConfigureListener.isPortFree:1025] Local host IP address: primary.localdomain/192.168.1.80
[main] [ 2010-10-16 05:16:31.223 EET ] [ConfigureListener.isPortFree:1027] Local host name: primary.localdomain
[main] [ 2010-10-16 05:16:31.229 EET ] [ConfigureListener.isPortFree:1039] Creating ServerSocket on Port:1521, IP Address: primary.localdomain/192.168.1.80
[main] [ 2010-10-16 05:16:31.243 EET ] [ConfigureListener.isPortFree:1075] java.net.PlainSocketImpl.socketBind(Native Method)
java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
java.net.ServerSocket.bind(ServerSocket.java:319)
java.net.ServerSocket.<init>(ServerSocket.java:185)
oracle.net.ca.ConfigureListener.isPortFree(ConfigureListener.java:1041)
oracle.net.ca.ConfigureListener.startOrStopListener(ConfigureListener.java:1118)
oracle.net.ca.ConfigureListener.typicalConfigure(ConfigureListener.java:256)
oracle.net.ca.SilentConfigure.performSilentConfigure(SilentConfigure.java:185)
oracle.net.ca.InitialSetup.<init>(NetCA.java:4159)
oracle.net.ca.NetCA.main(NetCA.java:405)
*[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: false*
my firewall is offline so what prevents oracle from using that port i tried also to use another port but i am getting the same error.
Please advise.
Mohamed

Hi Mohammed,
[main] [ 2010-10-16 05:16:31.249 EET ] [ConfigureListener.isPortFree:1088] Returning is Port 1521 free: falseMake sure that no listener service is running on port 1521.
Its returning value false while checking free port for 1521.
Regards,
X A H E E R

Creating ASM after installing grid infrastructure software only option

OS environment is Solaris 10 sparc (64 bit) with suncluster 3.2. Oracle version is 11.2.0.3.0... ASM configuration also..
Grid binaries (i.e. GRID_HOME) will be placed in local disk on both the nodes. Oracle Binaries (ORACLE_HOME) also will be placed in local disk on both the nodes..Oracle database only will be placed in shared storage with ASM...
My doubt is If i select "install grid infrastructure software only" option, can i create separate ASM instance on each node by using "$GRID_HOME/dbs/initSID.ora" file of each node?
Is it possible to create two ASM instance in the clustered environment since Single instance Oracle ASM is not supported with Oracle 11g release 2 as per "Oracle® Solaris Cluster Data Service for Oracle Guide"?
Please tell me the suggestion if anyone knows........
Thanks & Regards
Ramesh M

Hi,
First of all "software only installation" only places the binaries onto the local disks. This software only binaries later have to be configured either for GI Standalone Server or GI for Cluster environment. It differs in the root.sh script to be called, and in the need to use config.sh to configure the cluster environment.
So by configuring standalone server GI later, you will only have a local ASM installation.
However you will not end up with a initSID.ora file for the ASM instance, since the spfile of the ASM instance will always be placed inside the first ASM diskgroup to be configured. (the same for GI cluster, as for GI SI).
Now creating clustered ASM and SI ASM => you can only create clustered ASM for nodes which participate in the same cluster. So if you configured both nodes with clustered GI, but did not tell them to be 1 cluster, but 2, then both ASM instances will be separate. Resulting in beeing ASM1 instance on both nodes, and not able to mount the same diskgroup (consistent of the same disks) on both servers at the same time. So in the end having 2 clusteres consisting of one node each, does not really differ much from the ASM point of view, other than having ASM1 as instance name instead of +ASM (in GI SI). The difference is in the cluster stack below ASM, which simply has more processes and requirement for the clustered GI version.
And last but not least, yes you can have separate ASM instances on 2 separate nodes. If they are not part of the same cluster, the ASM instances are independent.
They are not really single instances, since they know that they are RAC ASMs, however they do not communicate with other nodes. However you may only have one ASM instance on each host (either physical or virtual host, as you can have an ASM instance in each solaris container).
Hope that clarifies it.
Regards
Sebastian

Installing Grid Infrastructure 11gR2 on a 2nodes cluster: device names req.

Hello, I am trying to install Grid Infrastructure 11gR2 on 2 sun nodes (Solaris 10) in order to try the product. but I am finding an error on the second node. After installing the software on both nodes and executing root.sh in the first node, the second node is complaining about the device I have defined for OCR, voting and ASM (the easiest scenary, 1 diskgroup for OCR, voting and ASM with 1 disk ) :
DiskGroup conf_dg creation failed with the following message:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/dev/rdsk/c5t500601603CE02E8Ed20s0' matches no disks
I have realised this device has not the same name on both nodes as boxes are different; the device name in the second system is
c2t500601673CE02E8Ed20s0
This is slice 0 of and EMC Clariion LUN. As this info is recorded at the crsconfig_params file in both nodes and is the same, should the device names be the same on the N nodes of a Clusterware cluster? How should I do to correct the installation of the second node?
Thanks in advance.

Hi Gurus,
I have similar problems on very first node1, it cannot create the diskgroup when running the root.sh. here is my configuration
two guest ldoms running sol 10 update10 on sparc t5120 and sharing iscsi Luns provided by third ldom ( created zfs volumes and set shareiscsi on)
all the permissions are 777 on /dev/rdsk/c1t*d0s1 and ownership grid:oinstall.
using solaris.sparc64_11gR2_grid.zip
I have installed 11gr2 rac for x86 using similar configuration with all x86 machines. but I cannot install using sparc as mentioned above. I have put some logs here
much appreciated for you help.
Thanks.
[main] [ 2012-09-11 03:43:10.363 EDT ] [SQLEngine.doSQLSubstitution:2373] The substituted sql statement:=select count(*) from v$ASM_DISKGROUP where name=upper('crsdg')
[main] [ 2012-09-11 03:43:11.070 EDT ] [UsmcaLogger.logInfo:141] CREATE DISKGROUP SQL: CREATE DISKGROUP crsdg EXTERNAL REDUNDANCY DISK '/dev/rdsk/c1t12d0s1',
'/dev/rdsk/c1t8d0s1',
'/dev/rdsk/c1t6d0s1',
'/dev/rdsk/c1t9d0s1' ATTRIBUTE 'compatible.asm'='11.2.0.0.0'
[main] [ 2012-09-11 03:44:02.639 EDT ] [SQLEngine.done:2148] Done called
[main] [ 2012-09-11 03:44:02.645 EDT ] [UsmcaLogger.logException:171] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:createDiskGroups
[main] [ 2012-09-11 03:44:02.647 EDT ] [UsmcaLogger.logException:172] ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
[main] [ 2012-09-11 03:44:02.649 EDT ] [UsmcaLogger.logException:173] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15018: diskgroup cannot be created
ORA-15081: failed to submit an I/O operation to a disk
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1898)
oracle.sysman.assistants.usmca.backend.USMDiskGroupManager.createDiskGroups(USMDiskGroupManager.java:235)

Install grid infrastructure + ntp server

Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?
Thanks.

user12064507 wrote:
Hi all,
I have installed Grid Infrastructure 11GR2 on linux system 5.6 and i have specified a clock server in my LAN.
When i ran runcluvfy.sh, it shows me : server clock : 195.83.132.135.
This IP is not in my LAN.
Do you know this problem?Ask your network guys to tell you that if the IP is not is not in your LAN, to where it belongs. They are the best people to ask it.
Aman....

System re-booted while installing grid infrastructure software(11 gr2)

Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans

Ansh wrote:
Good day,
While installing grid infrastructure software(11 gr2) for two node cluster on Redhat 5.4, the system re-booted i.e.node 1
just after the completion of running root.sh file on node 2.
My question is how to resume installation again.
Thanks
Ans
Hi,
Check if $GRID_HOME/cfgtoollogs/configToolAllCommands exist, if the file is there then as grid user execute the script
but to be safe and have clean installation I would deinstall it and re-run the installation
Cheers

INS-20802: Problem installing Grid Infrastructure on Windows 2008 R2 Server

Hello,
I try to install the Grid Infrastructure on a Windows 2008 x64 Server. Everything works fine (the SCAN configuration and Verify) but at the end of the installation process I get the following error message:
[INS-20802]: Grid Infrastructure Configuration not successfull.
The errors that I found in the file oraInstall2012-02-27_11-58-26AM.log inside the INVENTORY\LOGS directory :
INFO: Unable to read C:/app/11.2.0/grid/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
INFO: Install type for "Oracle Database 11g 11.2.0.3.0 " is "ASM".
INFO: Conflict while setting install type of "Required Support Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.assistants.server 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ntrdbms.oraconfig 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.xdk.server 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.mgw.common 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.install.seeddb 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ctx 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.owb.rsf 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sysman.console.db 10.1.0.2.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.oci 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.ovm 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.sqlj.sqljruntime 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.rdbms.hsodbc 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.marvel 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbdev 11.2.0.3.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database 11g 11.2.0.3.0 could be found. Missing component oracle.dbjava.server 11.2.0.3.0.
INFO: Install type for "Cluster Ready Services Files 11.2.0.3.0 " is "Complete".
INFO: Conflict while setting install type of "HAS Common Files 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Net Listener 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Internet Directory Client 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle JVM 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle JVM 11.2.0.3.0 could be found. Missing component oracle.javavm.companion 11.2.0.3.0.
INFO: Install type for "Oracle Net 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Netca Client 11.2.0.3.0 " is "Typical".
INFO: Install type for "SQL*Plus 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Database Utilities 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle Database Utilities 11.2.0.3.0 could be found. Missing component oracle.omwb 10.1.0.1.0.
INFO: Install type for "Oracle Recovery Manager 11.2.0.3.0 " is "Typical".
INFO: Install type for "PL/SQL 11.2.0.3.0 " is "Typical".
INFO: Install type for "HAS Files for DB 11.2.0.3.0 " is "Typical".
INFO: Install type for "Assistant Common Files 11.2.0.3.0 " is "Typical".
INFO: Conflict while setting install type of "Oracle Help For Java 4.2.9.0.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Buildtools Common Files 11.2.0.3.0 " to "Typical (Typical)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Sun JDK 1.5.0.30.03 " to "Maximum (Complete)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
INFO: OUI-10066:Not all the dependencies for the component Assistant Common Files 11.2.0.3.0 could be found. Missing component oracle.bali.kodiak 1.2.1.0.0I.
INFO: Install type for "HAS Common Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Multimedia 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Multimedia Locator 11.2.0.3.0 " is "Typical".
INFO: Install type for "Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle Net Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Globalization Support 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Core Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "RDBMS Required Support Files 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle JDBC/THIN Interfaces 11.2.0.3.0 " is "Typical".
INFO: OUI-10066:Not all the dependencies for the component Oracle JDBC/THIN Interfaces 11.2.0.3.0 could be found. Missing component oracle.dbjava.ucp 11.2.0.3.0.
INFO: Install type for "Oracle Core Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Installation Common Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "Precompiler Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Parser Generator Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Agent Required Support Files 10.2.0.4.3 " is "Custom".
INFO: Install type for "XDK Required Support Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle RAC Required Support Files-HAS 11.2.0.3.0 " is "Custom".
INFO: Install type for "Buildtools Common Files 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Globalization Support 11.2.0.3.0 " is "Custom".
INFO: Install type for "Oracle Locale Builder 11.2.0.3.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle JFC Extended Windowing Toolkit 4.2.36.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Clusterware RDBMS Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "Cluster Verification Utility Common Files 11.2.0.3.0 " is "Typical".
INFO: Install type for "CFS 11.2.0.3.0 " is "Complete".
INFO: Install type for "Oracle Notification Service (eONS) 11.2.0.3.0 " is "Typical".
INFO: Install type for "Cluster Verification Utility Files 11.2.0.3.0 " is "Complete".
INFO: Install type for "Oracle LDAP administration 11.2.0.3.0 " is "Typical".
INFO: Install type for "Deinstallation Tool 11.2.0.3.0 " is "Complete".
INFO: Conflict while setting install type of "Oracle Database Deconfiguration 11.2.0.3.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Enterprise Manager Common Files 10.2.0.4.3 " is "Complete".
INFO: Install type for "Oracle Notification Service 11.2.0.3.0 " is "Typical".
INFO: Install type for "Oracle Help For Java 4.2.9.0.0 " is "Custom".
INFO: Conflict while setting install type of "Bali Share 1.1.18.0.0 " to "Custom (Custom)". Install type already set to "Maximum (Complete)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Ice Browser 5.2.3.6.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Ice Browser 5.2.3.6.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle Extended Windowing Toolkit 3.4.47.0.0 " to "Custom (Custom)". Install type already set to "Complete (Complete)". Seting it to "Custom (Custom)".
I have read and implemented all the settings described in DOCs ID 811271.1 , ID 810394.1 and RAC on Windows Step by Step Installation Instructions.
After many attempts with the same error Ii am trying to install in a single node (RAC1). But the error looks the same, my server is clean with no oracle.
Note: For this installation I downloaded and uncompressed the files p10404530_112030_MSWIN-x86-64_1of7.zip, p10404530_112030_MSWIN-x86-64_2of7 and p10404530_112030_MSWIN-x86-64_3of7 of the oracle site.
I do not know what to do for this installation work.
Thanks

My recommendation would be to format the disks and install Linux.
And I say that only half-jokingly. Fail-over with Windows is never as fast or as transparent as with a *NIX O/S.
As to your specific issue ... open an SR with Oracle Support. Hardly anyone uses Windows for Oracle ... even fewer with RAC ... for the reason I gave above.

Installing Grid Infrastructure 11.2.0.2 fails on Oracle Linux 5.6 and 6.0

Hi all,
We are in the process of building our new enterprise environment and tried to install the following:
Oracle Linux 6.0
Grid Infrastructure 11.2.0.2
ASM
OCFS2
Oracle RDBMS 11.2.0.2
Installation of Grid Infrastructure failed on Oracle Linux 6.0 and 5.6 as well. Is it because it's not yet certified for these Oracle Linux versions? Where can we find compatibility matrixes or certification information to find out which versions do work together? Been trying to find them with no success.
Thanks for any help!

Dude wrote:
I have recently installed Oracle 11.2.0.2 including ASM, which also installs Grid infrastructure under Oracle Linux 5.6 (default UEK kernel) without any problems. I installed the oracle-validated package prior to the Oracle installation.OEL 5.6 and 11.2..02 Grid Infrastructure installation (for x86_64) failed in our case. Have opened a SR several weeks ago for it, but no resolution. We since reverted back to OEL 5.5 for building and running this specific RAC.
There's also errors in OEL 5.6's Infiniband s/w stack. The openibd service fails to apply errata correctly because the o/s command used has since changed command line parameters. My guess is that testing happened solely on new h/w where this errata did not have to be applied, thus were not tested. Also, this service failed to start the srp_daemon (is critical for making sure that the storage layer works each and every time and does not cause stale connections that lead to command rejections from the storage server after a reboot of a RAC node)
I not only had to fix the openibd service to correctly apply the errata, but also write a separate srpd service that dealt with starting up and shutting down the srp_daemon.
Not very impressed with OEL 5.6 at all and it will be unlikely that we'll use it. And it raises a lot of concern whether OEL 6 would be a robust enough o/s for running our RAC systems.

Install Grid Infrastructure 11GR2

Hi all,
I have just installed Oracle Grid Infrastructure 11GR2 without having all linux packages installed like UnixODBC and 2 others.
Do you thing is it a problem ?
Thanks.

No, I don't have error message. Just one at the end when Oracle check installation.
When i launch runcluvfy i have this problem :
[grid@rac1 grid]$ ./runcluvfy.sh stage -post crsinst -n rac1,rac2 -verbose
ExÃ©cution de post-vÃ©rifications pour configuration des services de cluster
VÃ©rification de l'accessibilitÃ© du noeud...
VÃ©rification : accessibilitÃ© du noeud "rac1"
Noeud de destination Accessible ?
rac2 oui
rac1 oui
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'accessibilitÃ© du noeud "rac1"
VÃ©rification de l'Ã©quivalence utilisateur...
VÃ©rification : Ã©quivalence de l'utilisateur "grid"
Nom de noeud Commentaire
rac2 rÃ©ussi
rac1 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'Ã©quivalence de l'utilisateur "grid"
VÃ©rification de la cohÃ©rence des fuseaux horaires...
SuccÃ¨s de la vÃ©rification de la cohÃ©rence des fuseaux horaires.
VÃ©rification de l'intÃ©gritÃ© du gestionnaire de clusters...
VÃ©rification du dÃ©mon CSS...
Nom de noeud Statut
rac2 en cours d'exÃ©cution
rac1 en cours d'exÃ©cution
Oracle Cluster Synchronization Services est en ligne.
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© du gestionnaire de clusters
La vÃ©rification des attributs Udev pour Emplacements d'OCR a dÃ©marrÃ©...
RÃ©sultat : VÃ©rification des attributs Udev rÃ©ussie pour Emplacements d'OCR
La vÃ©rification des attributs Udev pour Emplacements des disques "votants" a dÃ©marrÃ©...
RÃ©sultat : VÃ©rification des attributs Udev rÃ©ussie pour Emplacements des disques "votants"
VÃ©rifier le masque de crÃ©ation du fichier utilisateur par dÃ©faut
Nom de noeud Disponible Obligatoire Commentaire
rac2 0022 0022 rÃ©ussi
rac1 0022 0022 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification du masque de crÃ©ation du fichier utilisateur par dÃ©faut
VÃ©rification de l'intÃ©gritÃ© du cluster...
Nom de noeud
rac1
rac2
VÃ©rification de l'intÃ©gritÃ© du cluster rÃ©ussie
VÃ©rification de l'intÃ©gritÃ© d'OCR...
VÃ©rification de l'absence de configuration hors cluster...
Tous les noeuds sans configuration locale hors cluster
SuccÃ¨s de la vÃ©rification de l'exÃ©cution d'ASM. ASM est en cours d'exÃ©cution sur tous les noeuds de cluster
VÃ©rification du fichier de configuration OCR "/etc/oracle/ocr.loc"...
Fichier de configuration OCR "/etc/oracle/ocr.loc" vÃ©rifiÃ©
Le groupe de disques pour l'emplacement OCR "+DATA" est disponible sur tous les noeuds
VÃ©rification de la taille de l'emplacement OCR "+DATA"...
VÃ©rification de la taille pour l'emplacement OCR "+DATA" rÃ©ussie...
VÃ©rification de la taille pour l'emplacement OCR "+DATA" rÃ©ussie...
WARNING:
Cette vÃ©rification ne prend pas en compte l'intÃ©gritÃ© du contenu d'OCR. ExÃ©cutez 'ocrcheck' en tant qu'utilisateur disposant de privilÃ¨ges pour vÃ©rifier le contenu d'OCR.
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© d'OCR
VÃ©rification de l'intÃ©gritÃ© de CRS...
Le clusterware Oracle est en bon Ã©tat sur le noeud "rac2"
Le clusterware Oracle est en bon Ã©tat sur le noeud "rac1"
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© de CRS
VÃ©rification de l'existence de l'application de noeud...
VÃ©rification de l'existence de l'application de noeud VIP
Nom de noeud Obligatoire Statut Commentaire
rac2 oui en ligne rÃ©ussi
rac1 oui en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud ONS
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud GSD
Nom de noeud Obligatoire Statut Commentaire
rac2 non n'existe pas ignorÃ©
rac1 non n'existe pas ignorÃ©
RÃ©sultat : VÃ©rification ignorÃ©e.
VÃ©rification de l'existence de l'application de noeud EONS
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification de l'existence de l'application de noeud NETWORK
Nom de noeud Obligatoire Statut Commentaire
rac2 non en ligne rÃ©ussi
rac1 non en ligne rÃ©ussi
RÃ©sultat : VÃ©rification rÃ©ussie.
VÃ©rification du nom d'accÃ¨s du client unique (SCAN, Single Client Access Name)...
Nom d'adresse IP virtuelle SCAN Noeud En cours d'exÃ©cution ? ListenerName Port En cours d'exÃ©cution ?
rac-cluster-lpt-scan rac1 true LISTENER 1521 true
VÃ©rification de la configuration de la rÃ©solution de noms pour "rac-cluster-lpt-scan"...
ERROR:
PRVF-4664 : EntrÃ©es de rÃ©solution de noms incohÃ©rentes dÃ©tectÃ©es pour le nom SCAN "rac-cluster-lpt-scan"
Nom SCAN Adresse IP Statut Commentaire
rac-cluster-lpt-scan 10.176.1.181 en Ã©chec EntrÃ©e NIS
ERROR:
PRVF-4657 : Echec de la vÃ©rification de la configuration de la rÃ©solution de noms pour "rac-cluster-lpt-scan" (adresse IP : 10.176.1.181)
ERROR:
PRVF-4664 : EntrÃ©es de rÃ©solution de noms incohÃ©rentes dÃ©tectÃ©es pour le nom SCAN "rac-cluster-lpt-scan"
Echec de la vÃ©rification de la configuration de l'adresse IP virtuelle SCAN et du processus d'Ã©coute
OCR dÃ©tectÃ© sur ASM. ExÃ©cution de vÃ©rifications de l'intÃ©gritÃ© d'ACFS...
DÃ©marrage de la vÃ©rification pour contrÃ´ler si ASM est en cours d'exÃ©cution sur tous les noeuds de cluster...
SuccÃ¨s de la vÃ©rification de l'exÃ©cution d'ASM. ASM est en cours d'exÃ©cution sur tous les noeuds de cluster
DÃ©marrage de la vÃ©rification des groupes de disques pour contrÃ´ler si au moins un groupe de disques est configurÃ©...
SuccÃ¨s de la vÃ©rification des groupes de disques. Au moins un groupe de disques a Ã©tÃ© configurÃ©
SuccÃ¨s de la vÃ©rification de l'intÃ©gritÃ© d'ACFS de tÃ¢che
VÃ©rification de la configuration de disque "votant" de cluster Oracle...
SuccÃ¨s de la vÃ©rification de la configuration de disque "votant" de cluster Oracle
VÃ©rification de la non-appartenance de l'utilisateur "grid" au groupe "root"
Nom de noeud Statut Commentaire
rac2 n'existe pas rÃ©ussi
rac1 n'existe pas rÃ©ussi
RÃ©sultat : L'utilisateur "grid" ne fait pas partie du groupe "root". SuccÃ¨s de la vÃ©rification
VÃ©rification de l'installation du clusterware sur tous les noeuds...
SuccÃ¨s de la vÃ©rification de l'installation de clusterware
VÃ©rification de l'exÃ©cution de la ressource CTSS sur tous les noeuds...
VÃ©rification : ressource CTSS exÃ©cutÃ©e sur tous les noeuds
Nom de noeud Statut
rac2 rÃ©ussi
rac1 rÃ©ussi
RÃ©sultat : SuccÃ¨s de la vÃ©rification de la ressource CTSS
Interrogation de CTSS pour le dÃ©calage horaire sur tous les noeuds...
RÃ©sultat : SuccÃ¨s de l'interrogation de CTSS pour le dÃ©calage horaire
VÃ©rification de l'Ã©tat de CTSS dÃ©marrÃ©e...
VÃ©rification : Ã©tat de CTSS
Nom de noeud Etat
rac2 Observateur
rac1 Observateur
L'Ã©tat de CTSS est Observateur. Permutation vers des vÃ©rifications de la synchronisation d'horloge Ã l'aide du protocole NTP
DÃ©marrage des vÃ©rifications de la synchronisation d'horloge Ã l'aide du protocole NTP (Network Time Protocol)...
La vÃ©rification du fichier de configuration NTP a dÃ©marrÃ©...
Le fichier de configuration NTP "/etc/ntp.conf" est disponible sur tous les noeuds
SuccÃ¨s de la vÃ©rification du fichier de configuration NTP
VÃ©rification de l'activitÃ© du dÃ©mon...
VÃ©rification : activitÃ© de "ntpd"
Nom de noeud En cours d'exÃ©cution ?
rac2 oui
rac1 oui
RÃ©sultat : SuccÃ¨s de la vÃ©rification de l'activitÃ© pour "ntpd"
Recherche de l'option de rotation "-x" dans la ligne de commande du dÃ©mon NTP
VÃ©rification : ligne de commande du dÃ©mon NTP
Nom de noeud Option de rotation dÃ©finie ?
rac2 oui
rac1 oui
RÃ©sultat :
Option de rotation du dÃ©mon NTP vÃ©rifiÃ©e
Recherche de l'option de rotation "-x" dans la configuration du temps d'amorÃ§age du dÃ©mon NTP, dans le fichier "/etc/sysconfig/ntpd"
VÃ©rification : configuration du temps d'amorÃ§age du dÃ©mon NTP
Nom de noeud Option de rotation dÃ©finie ?
rac2 oui
rac1 oui
RÃ©sultat :
VÃ©rification de l'option de rotation dans la configuration du temps d'amorÃ§age du dÃ©mon NTP exÃ©cutÃ©e
La vÃ©rification du serveur d'horloge NTP commun a dÃ©marrÃ©...
Le serveur d'horloge NTP "195.83.132.135" est commun Ã tous les noeuds sur lesquels il est en cours d'exÃ©cution
Le serveur d'horloge NTP ".LOCL." est commun Ã tous les noeuds sur lesquels il est en cours d'exÃ©cution
SuccÃ¨s de la vÃ©rification du serveur d'horloge NTP commun
La vÃ©rification du dÃ©calage de l'horloge par rapport au serveur d'horloge NTP a dÃ©marrÃ©...
VÃ©rification sur les noeuds "[rac2, rac1]"...
VÃ©rification : dÃ©calage de l'horloge par rapport au serveur d'horloge NTP
Serveur d'horloge : 195.83.132.135
Limite de dÃ©calage horaire : 1000.0 ms
Nom de noeud DÃ©calage horaire Statut
rac2 -2.734 rÃ©ussi
rac1 -1.906 rÃ©ussi
Les dÃ©calages horaires du serveur d'horloge "195.83.132.135" se trouvent dans les limites autorisÃ©es pour les noeuds "[rac2, rac1]".
Serveur d'horloge : .LOCL.
Limite de dÃ©calage horaire : 1000.0 ms
Nom de noeud DÃ©calage horaire Statut
rac2 0.0 rÃ©ussi
rac1 0.0 rÃ©ussi
Les dÃ©calages horaires du serveur d'horloge ".LOCL." se trouvent dans les limites autorisÃ©es pour les noeuds "[rac2, rac1]".
SuccÃ¨s de la vÃ©rification du dÃ©calage de l'horloge
RÃ©sultat : VÃ©rification de la synchronisation d'horloge Ã l'aide du protocole NTP (Network Time Protocol) rÃ©ussie
SuccÃ¨s de la vÃ©rification d'Oracle Cluster Time Synchronization Services
Echec de la post-vÃ©rification de configuration des services de cluster sur tous les noeuds.
[grid@rac1 grid]$

Error PRVF-7565 received when installing Grid Infrastructure 12102 on OEL7/64bit

When installing GI on OEL7 I got this error PRVF-7565. Any clue?

Hi,
Try use kfod utility:
Note: Keep in mind that the Grid Infrastructure software does not need to be installed to use kfod, since kfod is located as well on the staging area where you uncompressed the Grid Infrastructure software, as the following example:
/stage/grid/stage/ext/bin/kfod
Where: "/stage" is the directory where I uncompressed the source software for the Grid Infrastructure software.
And put here :
$ kfod asm_diskstring='/dev/usasdirvg801_asm*' disks=all

Install grid infrastructure: crsctl

Hello!
I set Grid infrastructure. The official documentation after installation is recommended to run: "crsctl check crs", but I can not find the file "crsctl". There is only "crsctl.bin", which is running I get an error:
"-Bash-3.2 # / oracle/grid/app/11.2.0/grid/bin/crsctl.bin
Assertion failed: 0! = Ctx, file clsthrx.c, line 130
IOT / Abort trap (core dumped) "
What to do about it?
P.S. Sorry my poor English.

Sumit2 wrote:
The "crsctl" is available in $GRID_HOME/bin
-sumitI can't find =(
-bash-3.2# find / -name 'crsctl'
find: bad status-- /proc/794872/fd/5
find: bad status-- /proc/794872/fd/6
find: bad status-- /proc/815252/fd/9
find: bad status-- /proc/815252/fd/10
find: bad status-- /proc/827542/fd/8
find: bad status-- /proc/827542/fd/9
find: bad status-- /proc/827542/fd/10
find: bad status-- /proc/827542/fd/11
find: bad status-- /proc/979118/fd/5
-bash-3.2# find / -name 'crsctl.bin'
/oracle/grid/app/11.2.0/grid/bin/crsctl.bin
find: bad status-- /proc/794872/fd/5
find: bad status-- /proc/794872/fd/6
find: bad status-- /proc/815252/fd/9
find: bad status-- /proc/815252/fd/10
find: bad status-- /proc/827542/fd/8
find: bad status-- /proc/827542/fd/9
find: bad status-- /proc/827542/fd/10
find: bad status-- /proc/827542/fd/11
find: bad status-- /proc/979118/fd/5
-----

ASM prerquisit- Installing Grid infrastructure on AIX 6.1

Hello All,
I want to implement Oracle RAC 11g R2 on AIX 6.1.
I am preparing the prerequisite steps.
My question is regarding ASM.
Do i Have to create disks on my SAN storage, so I can create the ASM disk groups ?
how can I link the disk groups to physical disks ?
I used that before on Linux, but what i did that i create 5 physical disks then created an ASM disk group from these 5 disks ? how should i manage that in AIX?
Another issue:
On Linux I used to do the below:
1. I used the "fdisk" command to partition the disks ? should i do that on AIX? how it can be done?
2. I downloaded the appropriate ASMLib RPM for Linux. Is there anything like that for AIX?
3. I used to configure ASM lib as below :
# oracleasm configure -i
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: grid
Default group to own the driver interface []: dba
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]:
Writing Oracle ASM library driver configuration: done
# is there any step like that in AIX?
4. I used to create disks like below, How do i do that on AIX?
# /usr/sbin/oracleasm createdisk DISK1 /dev/sdb1
# /usr/sbin/oracleasm scandisks
# /usr/sbin/oracleasm listdisks
Regards,

Please refer below link for all your questions
Oracle 11g ASM on AIX with Real Applications Clusters (RAC)
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/5cb5ed706d254a8186256c71006d2e0a/22c2c037576f3d0d8625758b00176fd2/$FILE/11gRAC_ASM_1.pdf
Hope this helps,
Regards
httpd://www.oracleracexpert.com

*answered* installing grid infrastructure 11gR2 problem

moving: root.sh failed on node 1
Edited by: user8875620 on Jan 20, 2011 12:41 PM
Edited by: user8875620 on Jan 20, 2011 12:58 PM

I would suggest you post in the Grid forums - http://forums.oracle.com/forums/category.jspa?categoryID=140
You can edit your post above and post a link to the Grid forums post :-)
Srini

Grid Infrastructure 11.2.0.3 install fails with public & private subnet

Specify Network Interface Usage
Interface Name: eth0 Subnet: 192.168.1.0 Public
Interface Name: eth1 Subnet: 192.168.1.0 Private
Using the Advanced Installation ->
No GNS ->
I'm getting error [ins-41113] Specified public and private interfaces are configured on the same subnet: 192.168.1.0 Why is this an error because Oracle Documentation e17212/typinst.htm says the following:
A Single Client Acess Name (SCAN) for the cluster , wich the following characteristics:
* Three static IP address; however I want to use only two static IP address because I am not using DNS I'm using /etc/hosts file.
* On the same subnet as all other public IP addresses, VIP addresses, and SCAN addresses.
Please advise because I was able to install Grid Infrastructure 11.2.0.2 using the same configuration with no problems. Now that I am using Oracle 11.2.0.3 I'm encountering this problem.

Hi,
I appreciate insight with respect to Why Does it work in Oracle Grid Infrastructure 11.2.0.2 and not in 11.2.0.3 ?Some things that are not supported, are sometimes allowed by Oracle Product Software (I can say it's bug), but still desupported.
See this example.
In 11.2.0.1 and 11.2.0.2 it's possible add releases prior to 11.2 of Oracle Database to be managed by Oracle Restart. But It's not certified.
See this thread.
{message:id=9270783}
In 11.2.0.3 Oracle solved this issue don't allowing do that and created a new msg error :
PRCD-1245 : Addition of database version 11.2.0.3.0 is not allowed using srvctl version 10.2.0.0.0So, like example above in 11.2.0.1 and 11.2.0.2 it's not supported use same subnet to private and public network, but it's allowed by Oracle Product Software, now it's not allowed by Oracle Product Software
The install guide will tell you the following requirements private IP address must satisfy the following requirements:
*1. Must be separate from the public network*
2. Must be accessible on the same network interface on each node
3. Must have a unique address on each node
4. Must be specified in the /etc/hosts file on each node
The Best Pratices recommendation is to use the TCP/IP standard for non-routeable networks. Reserved address ranges for private (non-routed) use (see TCP/IP RFC 1918):
* 10.0.0.0 -> 10.255.255.255
* 172.16.0.0 -> 172.31.255.255
* 192.168.0.0 -> 192.168.255.255
Cluvfy will give you an error if you do not have your private interconnect in the ranges above.
You should not ignore this error. If you are using an IP address in the range used for the public network for the private network interfaces, you are pretty much messing up the IP addressing, and possibly the routing tables, for the rest of the corporation. IP addresses are a sparse commodity, use them wisely. If you use them on a non-routable network, there is nothing to prevent someone else to go and use them in the normal corporate network, and then when those RAC nodes find out that there is another path to that address range (through RIP), they just might start sending traffic to those other IP addresses instead of the interconnect. This is just a bad idea.
This above is described on MoS: *RAC: Frequently Asked Questions [ID 220970.1]*
Regards,
Levi Pereira

Installing 11gR2 Grid Infrastructure on SPARC Solaris 10

Please help! I am following the RACGuides_Rac11gR2OnSolaris.pdf to install 11gR2 Grid Infrastructure on SPARC Solaris 10 MU8.
bash-3.00# cat /etc/release
Solaris 10 10/09 s10s_u8wos_08a SPARC
Copyright 2009 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 16 September 2009
1. I installed Oracle Solaris Studio 12.2, ignored 124861-15 per doc ID 969497.1.
Installation went well, but root.sh gave on node1...
CRS-2676: Start of 'ora.evmd' on 'sunt2k-02' succeeded
CRS-2672: Attempting to start 'ora.asm' on 'sunt2k-02'
CRS-2676: Start of 'ora.asm' on 'sunt2k-02' succeeded
CRS-2672: Attempting to start 'ora.DATA.dg' on 'sunt2k-02'
CRS-2676: Start of 'ora.DATA.dg' on 'sunt2k-02' succeeded
u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-02 ... failed
Configure Oracle Grid Infrastructure for a Cluster ... failed
2. Per doc ID 1053192.1, I rerun the following....
bash-3.00# /u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-02
PRKO-2421 : Network resource is already started on node(s): sunt2k-02
PRCR-1079 : Failed to start resource ora.sunt2k-02.vip
CRS-5005: IP Address: 10.112.0.150 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-02.vip' on 'sunt2k-02' failed
CRS-2632: There are no more servers to try to place resource 'ora.sunt2k-02.vip' on that would satisfy its placement policy
PRKO-2422 : ONS is already started on node(s): sunt2k-02
PRKO-2423 : eONS is already started on node(s): sunt2k-02
same problem on node2....
CRS-2676: Start of 'ora.crsd' on 'sunt2k-03' succeeded
CRS-2672: Attempting to start 'ora.evmd' on 'sunt2k-03'
CRS-2676: Start of 'ora.evmd' on 'sunt2k-03' succeeded
/u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-03 ... failed
Configure Oracle Grid Infrastructure for a Cluster ... failed
3. Per doc ID 1053192.1, I rerun the following on node2.....
bash-3.00# /u01/11.2.0/grid/bin/srvctl start nodeapps -n sunt2k-03
PRKO-2421 : Network resource is already started on node(s): sunt2k-03
PRCR-1079 : Failed to start resource ora.sunt2k-03.vip
CRS-5005: IP Address: 10.112.0.152 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-03.vip' on 'sunt2k-03' failed
CRS-5005: IP Address: 10.112.0.152 is already in use in the network
CRS-2674: Start of 'ora.sunt2k-03.vip' on 'sunt2k-02' failed
CRS-2632: There are no more servers to try to place resource 'ora.sunt2k-03.vip' on that would satisfy its placement policy
PRKO-2422 : ONS is already started on node(s): sunt2k-03
PRKO-2423 : eONS is already started on node(s): sunt2k-03
4. Now I got stuck here that can not bring up CRS....this is the last step from installing Grid Infrastructure.
bash-3.00# cat installActions2010-10-26_09-10-36PM.log
INFO: Checking user equivalence...
INFO: User equivalence check passed for user "grid"
INFO: ERROR:
INFO: CRS is not installed on any of the nodes
INFO: Verification cannot proceed
INFO: Post-check for cluster services setup was unsuccessful on all the nodes.
INFO:
WARNING:
INFO: Completed Plugin named: Oracle Cluster Verification Utility
INFO: Oracle Cluster Verification Utility failed.
INFO: Oracle Cluster Verification Utility failed.
INFO: ConfigClient.executeSelectedToolsInAggregate action performed
INFO: Exiting ConfigClient.executeSelectedToolsInAggregate method
INFO:
The Runconfig command constructed is /u01/11.2.0/grid/oui/bin/runConfig.sh ORACLE_HOME=/u01/11.2.0/grid MODE=perform ACTION=configure RERUN=false $*
INFO: Since the option is to overwrite the existing /u01/11.2.0/grid/cfgtoollogs/configToolFailedCommands file, backing it up
INFO: The backed up file name is /u01/11.2.0/grid/cfgtoollogs/configToolFailedCommands.bak.2
INFO: ConfigClient.saveSession method called
INFO: Calling event ConfigSessionEnding
INFO: ConfigClient.endSession method called
INFO: Completed Configuration
bash-3.00#
Any advise would be appreciated.
Thanks much in advance...
R-

Hi,
it looks like the VIPs you used are already taken in your network or the name resolution on the VIP name does not return the correct IP address for the VIP, hence the problems.
Sebastian

Install Grid Infrastructure

Similar Messages

Maybe you are looking for