Install guide for solution manager 7.1

HI,
i want to install solution manager 7.1 in linux system
and i not find in SDN the install guide
did you now where i can find it?
best regards
Naor Shalom

The installation guides are not available on the SDN but at
http://service.sap.com/instguides
Markus

Similar Messages

Is there any service desk guide for Solution Manager 7 configuration?

Dear Sir:
I would like to configure the service desk of solution manager 7.
but all i found documents are for solution manager 4.
the IMG setting and other steps are quite different...
wondering is there any new guide or step by step documents for specific solution manager 7?
Regards
Jack Lee

hi,
There is no direct document which is that much specific
Have you checked this document
https://websmp101.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000122472008E
U can follow the steps and if u dont find any node u cn search in SPRO
in solman 7 mainly all the activities are under the node SPRO->scenario-specific->service desk
rest check this
Service Desk: Support team determination
/people/dolores.correa/blog/2007/10/06/service-desk-support-team-determination
Service Desk Implementation Guide
/people/bruyneel.guillaume/blog/2008/05/02/service-desk-implementation-guide-part-i
/people/bruyneel.guillaume/blog/2008/06/13/service-desk-implementation-guide-part-ii
Hope it helps,
Regards
Prakhar

System copy guide for Solution Manager 7.0 SPS15

Hello,
a new hardware is needed for our SAP Solution Manager 7.0 SPS 15. I will install a new SAP Solution Manager and do a system copy from the old hardware to the new one. There is no migration neccessary, because OS and DB will be the same.
Now I'm searching for some informations and guides to do a system copy of a SAP Solution Manager. All I found was a system copy guide of Netweaver 04s SR3/SR2 with informations about Java Usage Types but not for Diagnostics.
Are there any guides or howtos to do a system copy with SAP Solution Manager ABAP+JAVA? Does anyone have experiences and advices?
Kind regards,
Sascha Piotrowsky

> Looking forwards to this event I'm afraid of forgetting some dependencies or configurations which have to be changed also, like SMD-Agents configuration,s trusted connections, wiley introscope, e2e and so on.
Wily is not part of the copy - you will need to copy this "manually". The connections et al must be re-done...
Markus

Installing license for solution manager in DS (user/PW : sap*/pass)

Dear Experts,
I need to install license for the solution manager in the Discovery system 3.
I made 3 mistakes while logging in, so, the user/PW : sap*/pass can't logon to the system.
Can you please help me find how to log on to the client 001 of the solution manager when the user: sap* and PW : pass is unable to log on?
Thanks
Regards,
Sudeep

Hi Sudeep,
As per the Quick guide for V3, to login to Solman Client 001, the user /pw - : sap*/admin123
Since the sap* is locked, login with admin/admin in client 001 and unlock the required user account.
R,
Chaitra

Guide for Solution Manager

Can some one guide me about a new book or guide for using the Solution Manager?
Basically the "how-to" kind of information...even PDF documents would also be appreciated.
Pl reply.
Thanks

hi,
Just view the SAP tutor files available on sap marketplace(SMP login req)
Goto Service.sap.com
knowledge exchange on the left hand side you will have solution manager option
expand the same select 4.0 version(lastest)
Then you can select the learning map whichever applicable to you.
https://websmp204.sap-ag.de/support
Also visit the following links,
Weblogs Related to Solution Manager
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/16eaf8ea-0c01-0010-c1af-b3febfa33574 [original link is broken]
/people/sapna.modi/blog/2007/06/28/sap-solution-manager-40-project-management--business-blueprint-phase-part-iii
/people/sapna.modi/blog/2007/05/06/sap-solution-manager--roadmaps-introduction-part-i
Please reward points.

Documentation for Solution Manager 4

Hi all!
Iam going crasy..
At the moment I am just customizing the solution manager 4. In the reference guide section create background jobs they refer to the configuration guide of the solution manager 4. 0 to get a complete list of background jobs for the solution manager 4.0.
Ive downloaded the configuration guide for solution manager 4.0 but there is no information about this. I know the place of documentation on the sap market \solutionmanager.
Did anybody know something more?
Thank you for help!
Best regards
Thomas

Hello Thomas,
Please in spro go to Basic Settings->SAP Solution Manager System->Schedule Background Jobs
The information of this point is more than enough to configure these jobs.
In a previous Configuration Guide you can see:
Periodic Jobs
Periodic Job scenario
REFRESH MESSAGE STATUS used to collect responses from SAP for messages
and Issues sent from the SAP Solution Manager
SOLMAN_ISSUE_STATUS_REFRESH Service Desk
SM:SCHEDULER Solution Monitoring
BTC_CMS_COLLECTOR Change Manager
LANDSCAPE_FETCH Implementation and distribution
CRM_ISSUE_REFRESH Implementation and distribution (testing)
Best regards,
Dolores

Installing the License Key for Solution Manager installation

Hi,
Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager.
Thanks

I guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!

What are installations material for Solution Manager 7.0 EHP 1

hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..

https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis

Download Location For solution manager 4.0

Hello,
 I am planning to install NW2004s_SR1 portal.
For installation of portal we need to generate a key from solution manager.
 I am new to the installation of solution manger,can some tell me the exact download path for the software (solution manager 4.0).? I have tried with the path (service.sap.com/swdc >Downloads Installations and Upgrades > Entry by Application Group<your solution>
<release of your solution> <your operating system><your database>.)as given in the installation guide of solution manager 4.0 (SOLMAN_40_SR1_WIN_MSSQL.pdf), but not able to find.
Here are my system details
OS: windows server 2003
DB: Microsoft SQL server 2005
Regards
Sunil Kulkarni
PS: Rewarding points will be given for helpful answer.

Hi Prince/ Sridhar,
 Thank you very much for your reply & time. I have navigated as directed by you,(SAP marketplace> SWDC> Installations and Upgrades > SAP Technology Components),but could see only two links as:
*SAP REMOTE DATABASE MONITOR
*SAPINST
(Solution manager link is not appearing)
 I think, I need to raise a ticket with SAP to cross check our licence.(since we have licence for MS SQL server only. Do you think this could be the reason?)
Sridhar: To get the right side navigation, which JAVA component, we need to install on the system? (I have both j2sdk1.4.2_09 & Sun AppServer installed on my machine.)
Regards
Sunil kulkarni

Wily Introscope Version for Solution Manager 7 SPS 17

Hi
We have a solution manager 4 (now 7) running on an ABAP stack only, this was recently upgraded from Solution Manager 3.2 which was installed 3 years ago as ABAP stack only, this server was never powerful enough to have the Java stack added and the project did not require it.
I am now looking to migrate this ABAP Solution Manager 7 to a new server, using ABAP & JAVA so I can make use of Solution Managaer tools like Diagnostics, RCA, WILY etc.
On a sandpit copy I have migrated the ABAP instance to a more powerful server and added the Java Instance from the Solution Manager 4 Installation Master, so I now have a dual stack SM 4, I have patched this to SP17.
I am looking to install Wily Introscope for monitoring, I have read Note 797147 - Wily Introscope Installation for SAP Customers, where it says you should always use the latest version of Wily, which is 8.0.2, but looking at the note, the downloads for Introscope Enterprise Manager and Introscope Workstation are from SAP SOLUTION MANAGER 7.0 EHP 1, but I am not running Solution Manager on EHP1, I am on SP Stack 17.
Looking in the SWDC there are downloads in SAP SOLUTION MANAGER 7.0 -> Entry by Component -> Solution Manager JAVA Stack -> WILY INTROSCOPE ENTPR MGR 8
Is this what I should be using for my SP Stack 17, or should I use the EHP1 version?
Also, setting up the Solution Manager Diagnostics, is there a setup PDF for Solution Manager 7 SP17 ? I cannot find a setup guide for this release, most are for EHP1, I would rather not have to implement EHP1 as part of this migration !
Thanks for any help.
Paul.

Hi Bhudev
Thanks for the reply, I presumed it was the Wily introscope 8 without the EHP1 I required.
As for installation guide, I have think you have misunderstood my question, I already have the wily installation guide from the note location, I wanted to know if there is any Solution Manager Diagnostics setup guides for SP17 ?
When I use transaction SOLMAN_WORKCENNTER --> System Monitoring --> Solution Manager Diagnostics --> Diagnostics System --> Diagnostics Setup --> Setup Wizard
the first 2 (of 23) setups are failing :
SSO The value of profile parameter login/accept_sso2_ticket could not be checked
BI Cannot invoke CCMSBISETUP on host localhost
Warning :
User(BI) Role SAP_BI_E2E does not exist
Then it says :
To complete the Diagnostics Setup, you should perform the following operations as documented in Diagnostics Setup Guide
I cannot find this Diagnostics Setup Guide for SP17 ?
The installation guides are mainly for EHP1, media library under sap-ag.de/diagnostics does not show this setup guide, Master Installation guide does not mention it, so was wondering if anyone could point me in the right direction for this guide ?
Thanks,
Paul.

Post Installation steps for Solution Manager 4.0

Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
Sunil

Hi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday

ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

Dear all,
Hi,
I am configuring solution manager 7.0.
In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
program WEBADMIN not registerred.
can any one tell me how to register this program in sap gateway.
best regards
azeem

Hi Azeem,
Just before creating the rfc connection do this step.
Set-Up Solution Manager Connection to Solution Manager Diagn
Use
Check the connection to function Solution Manager Diagnostics.
Default Settings
The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
Activities
If the default values are correct, save the settings.
To run the Solution Manager Diagnostics in another system, enter the required data and save.
Also check that your java is active.
Regards
Ashok

Problem in installation of Business Content for Solution Manager

Hi all,
I have a problem while trying to install the Business Content for Solution Manager. In detail, I cannot install/ see the Process chains. I am not much familiar with Business content installation, so maybe I missed and /or some step.
Following the instructions from SAP IMG (SPRO/ SAP IMG / Solution Manager / Configuration / Scenario-specific settings / Solution monitoring / BI Reporting / BI Client) , I activated the Datasource 0SM_SMG_ROOT , performed all the steps and installed all the relevant Business Objects (Infoobjects, Datasources, Infocubes, Infopackages, etc.). All the objects seen from transaction RSA1 seem correctly installed and activated.
The last step is the installation/activation of the Process chains. This step is executed, but the installation job terminates with messages like Infopackage 0SM_XXXX does not exist in D version; activation not possible. It seems like Process chains are looking for some Infopackage, and these are not present. They are not present indeed, and I dont know why. The result is that no Process chain is visible from transaction RSPC.
Am I missing some step, or doing a wrong/ incomplete procedure ?
Thanks a lot

HI Saravanan,
For Solman Service Desk, the following objects are used :
Cube : 0CSRV_C01
DSO : 0CRM_PROH
DataSource : 0CRM_SRV_PROCESS_H
And apart from this there are some MD datasources, for BPARTNER, USER STATUS, CATEGORY etc.
Regards
Mahesh Kumar

BI content for Solution Manager 4.0

Hi Experts,
I want to install BI content for Solution Manager 4.0 but i don't know what kind of BI content i need and where can i get some information about this.
if somebody knows somthing , please , let me know.
Thank you.

There isn't a lot of standard content for Solution Manager. It's mostly alerts, server, module, database and overall system information for the environments connected to that Solution Manager instance. The standard DataSources are:
0SM_DSWPBI_BPM                   BPM Data (Alert Data)
0SM_DSWPBI_DB390
0SM_DSWPBI_DB400                DB400 Data
0SM_DSWPBI_DBADA               Adabas Data
0SM_DSWPBI_DBDB2               DB2 Data
0SM_DSWPBI_DBINF                Informix Data
0SM_DSWPBI_DBMSS              SQL Server Data
0SM_DSWPBI_DBORA              Oracle Data
0SM_DSWPBI_MODUL              Module Data
0SM_DSWPBI_PERF                 Performance Data
0SM_DSWPBI_SERVER            Server Data
0SM_DSWPBI_SYSDATA          System Details Data
0SM_DSWPBI_SYSTEM            System Data
There are several InfoCubes, one for each DataSource in the standard content. These InfoCubes are then unioned in a standard content MultiProvider.

Process for applying for Solution Manager Key?

I have to install a NW2004s system in a AIX Machine.
I understand that i need a solution manager key for installation. We dont have solution Manager installed in our Landscape. But i came to know that i can request for a solution manager key from SAP
Please let me know the website, process for applying for Solution Manager key

Balaji,
This is interesting, SAP is pushing customers to have solution Manager installed with features like Solution Manager Key, Maintainance Optimizer etc. It will get difficult for customers who do not have solution Manager running on their site.
You will have to create support message under the component XX-SER-SMKEY and request for solution manager key, provide them all the details of your system.
Cheers,
Nisch

Install guide for solution manager 7.1

Similar Messages

Maybe you are looking for