INSTALL HP LASERJET 2820 ON WINDOWS 7...
Good evening.
Could greatly use some help. Installed Windows 7 and am now trying to figure out how to get my HP Color Laserjet 2820 (all-in-one) functioning.
Which software installation do I download from HP?
How do I "fool" the system or use the compatibility feature to install the printer?
Note: I have it conneted to a wireless linksys router.
I know these seem like very ridiculous questions, however from past experience (nightmare) - I am hoping to do this right the first time with everything working - printer, scanner, copier.
The last go around on Vista proved disastrous with support never being able to figure out the file that was hung up in no where land causing problems.
Thank you for any advice or help you are able to provide.
j.
It will not install on windows 7 HP is not releasing software for it. You might be able to install a print driver but the full software is not available and will not become available. If you have xp or vista 32 bit I could help you get it installed that way but with windows 7 you are out of luck.
Similar Messages
-
How to install hp laserjet 1020 on windows xp
sir, i want to install hp laserjet printer on windows xp. it is displaying an error message "inappropriate invocation.unable to start application".
plz tell me what to do and how...Hello priyasim,
Welcome to the HP Forums! I understand you are receiving a message "Inappropriate invocation, unable to start application". I will try my best to help you resolve this issue.
I would recommend following this Microsoft document on You Are Unable to Start a Program with an .exe File Extension. If you are still unable to install the Laserjet 1020, then you would have to perform a clean install of Windows.
Please post your results, as I will be looking forward to hearing from you.
I worked on behalf of HP. -
TUTORIAL: Install HP Laserjet 1000 on Windows 7 x64
I've created a tutorial to install HP LaserJet 1000 printer under Windows 7 x64.
http://laserjet1000.esy.es/
I hope it helps someone.PCL5 is a rather loose term; for at least the last decade, drivers for new PCL5 printers have been one or the other of:
PCL5e - PCL5 enhanced for monochrome printers.
PCL5c - PCL5 enhanced for colour printers.
Even those terms are not precise, since the set of PCL escape sequences supported by one PCL5e printer may not be exactly the same as those supported by a different model, especially if those models are from different ranges / generations. -
Trouble installing HP Laserjet 4 in Windows 10
I had Windows 7, not windows 8.1. Does that alter your view re compatibility with Windows 10?
I installed Windows 10 today after using Windows 7 successfully with my LaserJet4. I couldn't get my printer to work. After reading other posts on the HP Forum and beating on Microsoft to help me, I solved the problem. Go to "settings." Find the icon that includes printers. Click on "devices and printers." You will NOT see LaserJet 4 in the list of printers initially. Click on "add printer." You will eventually get to a message that says something like, "My printer isn't listed." Click on that. Eventually, you will have the opportunity to "insert printer manually" or something like that. You will then have choices to make. The key is in the port you choose. (If you don't click open the part that asks the kind of port you want, you will not succeed. Believe me, I tried it all, including Windows updates, etc. I saw LaserJet4 in the list of HP printers and would click on it, only to get an error message when I tried to print the test page.) What you have to find is the "virtual USB" port. If you click on that, you will be able to get your printer to work with Windows 10. Mine now works like a charm!
-
Install hp laserjet 3150 in windows 8.1
hi,
with converter cabel i connect into usb port my hp laserjet 3150 windows can't find new devices i it's driver problems or my converter cabel..?Hi,
Please see this link and it appears that this printer is not compatible with Windows 8.1:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=zh-cn&Architecture=X64&TextSearch=hp%2Blaserjet%2B3150%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
Check with the manufacturer, thanks for your understanding.
Kate Li
TechNet Community Support -
How to install hp laserjet p2015 in windows vista 32
I need help. I already tried downloading :HP Universal Print Driver for Windows PCL6 is not working.
I tried:HP Printer Administrator Resource Kit and this comes out..Hi, take a look at this HP link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Installing Hp laserjet 3050 for windows 7 32 bit
Hi,
i have followed all the instructions given here
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
but I have a problem installing the way you described. when the installation propmts for attaching the printer, the process stops at 4/5. Then a X sing appears and the Win 7 PC cannot communicate to finish device configuration.
If I click next. the the software finishes installation but after restart, an error massage appears that the software should be reinstalled.
PLease help,
thank you,
PreviewHello @Preview,
Welcome to the HP Forums!
I understand your concerns. Unfortunately, for this type of printer, I need to direct you to our Enterprise Business Community Forums. This will be the right section to troubleshoot this issue. Good luck.
I worked on behalf of HP. -
Laserjet 4+ with Windows 8.1
Does anyone know how to install a Laserjet 4+ with Windows 8.1?
This is a great workhorse printer and we hate to replace it.Hi, does your 4+ have a JetDirect card?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
Unable to install HP Laserjet P1005 on a Windows 7 64-bit OS system
I have attempted to install both the full package and just the driver for an HP Laserjet P1005 local printer to my personal PC which I updated the OS to MS WIndows 7, 64-bit version numerous times and I have been unsuccessful each time. On each attempt to run the installer, whether it be the full version or just the driver, and you come to the point in the installation process where you are to plug in your local printer's USB cable to your PC I keep encountering an error message indicating that the USB device is not recognized. A further investigation reveals that there is in fact an unknown device. I click on this and I encounter a Microsoft generated message which indicates the following information - Windows has stopped this device because it has reported problems. (Code 43)
The following Microsoft web site - http://support.microsoft.com/kb/310123
has the following Recommended resolution
One of the drivers controlling the device notified the operating system that the device failed in some manner.
If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
Well, I went through all of the above recommended actions and I got nowhere. I went back on the web and did some further research. This time I found the following information at the following HP web page -http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-59850-1&lc=en&dlc=en&cc=us&lang=en&os=1060&product=3435668
This was a link to an HP web page which pertained to a so-called repair utility software that was for an HP Laserjet P1000 and P1500 Series Plug and Play Recovery Utility.I tried this but it has not rectified my problem installing the driver for my local printer.If you have the magical solution to this problem I would appreciate it if you could provide it to me. Thank you.
<text removed for privacy>
Message Edited by WendyM on 11-29-2009 08:25 PMWendyM: I seem to have EXACTLY the same problem...
- New Sony Vaio with Windows 7 Home Basic 64bit factory installed
- HP LaserJet P1005 as a local printer
- P1005 was first installed on the Vaio using the original install CD and sort of worked
- worked OK for the installing user but only intermittently for the other user
- both users had problems with the printer queue locking up in various situations (only solution was to reboot)
- decide to try and update the installation of the printer
- downloaded both the driver files you speak of from HP
- small Plug and Play file (c4Mb) got into endless loop when trying to pre-install drivers and had to be killed
- large full installation file (c167Mb) also failed to install properly
- tried uninstalling and rebooting various times after various failed attempts to get this full package to work.
- situation now is that the P1005 is simply uninstallable on the Vaio but continues to work fine on two XP machines (see below)
- a detail: when the P1005 is plugged into any machine (Vaio or XPs) USB reports that it could run faster if it was on a USB 2.0 port
- this seems to be a strange message on a 2010 Sony Vaio which obviously has USB 2.0 ports
- stranger yet, the XPs are completely unaffected by this message, and print to the P1005 normally, as they always have
The XP machines:
- One XP machine is an old 2006 HP Pavilion
- The other XP machine is a 2009 Acer netbook
- both machines with their original factory installed XPs, and both regularly updated
- the P1005 is a local printer on all machines
- each machine is plugged into it when printing is needed and the 2 XP machines always connect and print, regardless of the USB speed message
- the P1005 even works from the XPs via an unpowered USB physical hub with a USB mouse connected as well
HP really seem to have gotten themselves into a rather shameful mess over their printer drivers. In the year 2010 it seems insane that plugging a printer into a computer is so stunningly complex.
Indeed HP seems to be going rapidly backwards. The Vaio was bought to replace the old 2006 Pavilion (an excellent machine which has never put a foot wrong despite the most intensive use, and which continues to work fine if a little slowly in comparrison to the newer machines) because when we saw the HP replacement we were so repelled by its awful ergonomics, physical appearance, and ragged construction (raw metal edges round the front corners!) in comparisson to the Pavilion that we didn't need any convincing to buy the wonderfully constructed Vaio. Now we discover that a printer that works fine on XPs is unusable on Windows 7. A strange form of progress indeed.
For many years I revered the quality of HP products. No longer I'm afraid. The Pavilion became a Vaio. I wonder what will take the place of the P1005 (I am actually being extremely restrained about the P1005 because it compares miserably with its sturdy predecessor: our sadly missed HP LaserJet 1010),
Regards
cricobr -
How to install Printer HP LaserJet P2015 in Windows 7!
Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I can´t install my HP laserjet 1018 in windows 7 (64x), a error message appear "device not recognize
Try this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
How can i find/ install printer driver hp laserjet 1010 for windows 7
Dear Sir/Madam
I have HP laserjet 1010 Perinter. my operating system is windows 7. my printer driver did't install. how can i find driver or software intall to my computer.
please give me some sjession. or download link
mr mintu
Cell. 8986272527
e-mail - [email protected]The information available in the following weblink would help you to resolve the problem:
http://h30499.www3.hp.com/t5/Windows-7/hp-LaserJet-1010-driver-windows-7/td-p/1115411
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!*** -
Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?
Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt -
[SOLVED] Installing HP LaserJet 1018
I've done everything but I can't installed 1018 LaserJet on my system..
I even install python2 and changed the syntax of hp-setup script from
/usr/bin/env python
to
/usr/bin/enc python2
... It still doesn't works.. gives me following error
Verifying archive integrity... All good.
Uncompressing HPLIP 3.11.1 Plugin Self Extracting Archive.........................................
File "./plugin_install.py", line 78
except ImportError, e:
^
SyntaxError: invalid syntax
I tried to install the foo2zjs driver, but it failed to compile saying that dc is missing, install dc.. Can you tell me which dc is it referring to?
I'm really tired to boot Windows everytime I want to print anything..
Last edited by tarun.hellknight (2011-02-19 04:58:25)use foo2zjs in aur. Sometimes the formware doesnt get uploaded to the printer correctly (via an udev rule) so use this "cat /usr/share/foo2zjs/firmware/sihp1018.dl > /dev/usb/lp0"
Maybe you are looking for
-
Panasonic DMC-TS1 ... only works 1/2 the time
For the most part... when I plug in my TS1 to my iMac via USB with the SDcard still inside... and there is HD Movies on it, iMovie shows it and pulls up the import box. However sometimes nothing happens... the little drop down thing drops down when i
-
Resetting the Sequence operator in OWB
I have a Sequence operator for one column in the mapping. It correctly increments by 1 for each row (nextval) . I have done some testing and now I want to reset the next increments. Like I want to start from 1 instead of some 588 like that which is r
-
Extra customer group 6 in customer master possible or not
hi sd experts, my client asking for additional wants additional field in customers master >extras>additional data > one extra additional customer data (S&D) - existing 5 groups already using. img>sd>master data>business partners>customers>sales>maint
-
I have always used Nero wav editor to add eq, add volume and noralize recordings....do I have that feature in premier elements? and if so, where do I find it?
-
How to change the jobclass of a specific Infopackage
Hi, the standard jobclass = 'C' .. but now, for the run of a specific infopackage I want to change the jobclass, only for this infopackage, to jobclass 'A' ... I've already tried to define a new job, with jobclass 'A' by selecting the jobname generat