Install http sever from companion CD- question closed : )

Hello all,
I'm going to install http server from companion CD.
In the first step: Specify File Locations
Enter or select a name for installation and the full path where you want to install the product. By default, in my pc, Oracle use:
Name: OraDb10g_home1
Path: E:\oracle\product\10.1.0\Db_1
My question is, while installing 10g, the above name: OraDb10g_home1 was already used. Should I choose another name and path for the new installation of companion CD?
Answer: I used different name and path
Also from my previous installation of companion CD, I found there are two products for installing, one is http server, the other one is (sorry I forgot).
Should I only choose the option of http server ? I'm going to install html db 2.0 after installing http server.
Answer: I only installed http server.
Thanks for your attention,
Emily
Message was edited by:
Emily

Hi Geostc,
XML DB HTTP Server is not required when you are using Oracle 10g. It is only required when you are using Oracle 11g. So, uninstall this component from your database, and follow the steps given in the URL below:
http://www.idevelopment.info/data/Oracle/DBA_tips/Oracle_Application_Express_2/APEX2_5.shtml
Your issue will be resolved.
-Md Sarfaraz Khan

Similar Messages

Problems with OPMN from Companion CD (Oracle 10g R2 x86_64 RHEL4)

I have installed Oracle 10g DB R2 64bit on RHEL4 x86_64 (AMD64) and HTTP-Server from Companion CD
All works.
But after running opmn appears problems:
1. The system message to syslog: "ip_conntrack: table full, dropping packet"
2. 'netstat -a' displays me thousands TCP-session on localhost to port 6100 in TIME_WAIT state
And network services on my host more died than alive...
If I increase ip_conntrack kernel parameter, then network state alive. But the problem with TCP-sessions is not resolved.
Any ideas?
Thanks, and sory for my english :-)
P.S. I have RHEL4 without update 1, but with new kernel and patched binutils. Update of RHEL can resolve this problem?

Thank you!
The problem described in Metalink Doc-ID Note : 284602.1 is my case!
But this document applies to Oracle Net Services - Version: 10.1.0.2 to 10.1.0.3.
I have Version 10.2.0.1.0 and the problem apears again (with some symptoms are differ).

Cant Install HTTP Server on SUSE10

Hello,
When I try to install HTTP Server from Oracle DB 10g Companion CD on a SUSE 10 with a working Oracle10g DB I get an error message where ever I call runInstaller so my installation never initiates.
As in the installation documentation I change my directory to "/tmp" and then from there I call runInstaller like "/media/cd_name/runInstaller". Just as I press enter I got this message " /media/cd_name/runInstaller: Line 61: /media/cd_name/install/.oui: no such file or directory"
It is also happens when I try the root user and also happens the same when I try to run the installer from a directory instead of cd.
Can Anybody help me?

Hi Orlando17R,
Are you getting the following error message when installing SQL Server?
“The configuration registry key is invalid”
If that is the case, you might need to rebuild Performance Counters, for more details, please review this similar blog:
SQL Server 2008
R2 Installation Issue : ” The configuration registry key is invalid”.
However, if the issue still persists, please help to post the summary and detail logs for analysis. For more information
about how to view SQL Server Setup log files, please review this
article.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Libdb.so.2 RHEL4 during 10GR2 Companion CD install - HTTP Server

I'm getting the following error in the log file when the install is trying to start the HTTP Server as part of the HTMLDB installation path.
/app/oracle/product/10.2.0.ae/Apache/Apache/bin/apachectl start: execing httpd
/app/oracle/product/10.2.0.ae/Apache/Apache/bin/httpd: error while loading shared libraries: libdb.so.2: cannot open shared object file: No such file or directory
libdb.so.2 does exist under /usr/lib64.
I've compared my libraries against those listed in the installation guide and I appear to be at or higher. I even added gnome-libs-devel after searching other locations for info even though its not listed in the guide.
binutils-2.15.92.0.2-13.0.0.0.2 (x86_64)
compat-db-4.1.25-9 (x86_64)
control-center-2.8.0-12.rhel4.2 (x86_64)
gcc-3.4.4-2 (x86_64)
gcc-c++-3.4.4-2 (x86_64)
glibc-2.3.4-2.13 (i686)
glibc-2.3.4-2.13 (x86_64)
glibc-common-2.3.4-2.13 (x86_64)
gnome-libs-1.4.1.2.90-44.1 (x86_64)
libstdc++-3.4.4-2 (i386)
libstdc++-3.4.4-2 (x86_64)
libstdc++-devel-3.4.4-2 (x86_64)
make-3.80-5 (x86_64)
pdksh-5.2.14-30.3 (x86_64)
sysstat-5.0.5-1 (x86_64)
xscreensaver-4.18-5.rhel4.9 (x86_64)
Setup:
RHEL4 (2.6.9-22.0.2.ELsmp AMD64) x86_64
10.2.0.1 Companion CD (HTMLDB 1.6)
64 Bit Oracle DB (10.2.0.1) installed and running from separate ORACLE_HOME
any assistance would be appreciated?
Thx
Cindy Lou

SysAdmin friend helped out, so I figured I post the solution.
In my prior research, gnome-libs was pointed as the problem, including info from Metalink, except that I was told libdb.so.2 is not in that library.
I need to install the i386 of compat-db
as root: up2date -u compat-db --arch=i386
as oracle: $ORACLE_HOME/opmn/bin/opmnctl startall
Things started with no errors. Yeah onto configuration.
Cindy Lou

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

Hi, having old macbook pro intending to upgrade my os from snow leopard to lion but negative reviews on lion just put me off..i have ms office and photo shop installed on my machine..my question is will upgrading to lion stop me using those application?

Hi, having old macbook pro intending to upgrade my os from snow leopard to lion but negative reviews on lion just put me off..i have ms office and photo shop installed on my machine..my question is will upgrading to lion stop me using those application? thank you.

htfromgrantown wrote:
Hi, having old macbook pro intending to upgrade my os from snow leopard to lion but negative reviews on lion just put me off..i have ms office and photo shop installed on my machine..my question is will upgrading to lion stop me using those application? thank you.
Negative reviews are common place here as it is a trouble shooting forum. If you want to read the advantages, improvements and new features then go to the Apple site. If you are running Word 2004, Early Adobe suite, etc which are PPC programs, then don't update. Go to Apple logo in upper left menu bar, open About this mac > More Info > Software >Applications and sort by 'Kind' and look what PPC programs you have installed. If you are not prepared to upgrade these programs, then do not update to Lion.
There are plenty of threads to read up on about this here. But remember that 99.9% of comments will be negative, even though the forums represent only a tiny fraction of the Millions of Lion Downloads purchased and installed with no issues at all. So basically it's your call.
Good Luck

How to do Handshake with tired party(bank) HTTPS URL from SAP PI server

Dear Expert,
I have developed bunch of scenarios, all are synchronous ABAP proxy to HTTP_AAE with bank on PI 7.4(dual stack). Bank web server is HTTPS enabled server. Our ABAP developments are still in progress also we have few issue in connection from ECC to PI.but that is not the focus of discussion here.
we want to do the handshake to check the connectivity with bank on their HTTPS URL from PI. Bank has provided the privet key for SSL from their server and corresponding public key they have maintained on their server. I have imported the private key under NWA -> Certificates -> Key Storage -> TrustedCA->Import Entry->Entry Type->PKCS#12->select the SSL.p12 file->import , also I have selected the option to "Use SSL" in HTTP_AAE receiver communication channel and selected the corresponding entryin "keystore view" and "keystore entry". All these I have done in our DEV system, and we are trying to connect our PI dev to bank Dev server.
Questions
Is there any specific steps to do the handshake with third party HTTPS(bank in my case) server? if not, how can we just test the HTTPS connectivity by using the SSL private installed on our PI server, without running the complete scenarios. Our PI has been installed on UNIX, and "telnet https url 443" is working, as network team has opened the HTTPS port.
We have not enabled the SSL technically on our PI server, and we have not installed any generated certificate from our PI server. Moreover, we have not made our PI url as "https:hostname:port" as we just need to communicate with bank by using their private key. Do you guys think we should enable the SSL? if yes, please explain why.
What is the best practice to test the connection with third party having HTTPS URL? how can I just assure HTTPS communication is working fine, before testing my actual scenarios.
Thanks for helping always.
Regards,
Farhan

Hi Farhan,
Some part of the blog is applicable for sending HTTPS request to partners/third party (Receiver SOAP Adapter).
If banks certificates are already in trustedCA, then, can you check if it also imported under user PIISuser under Identity management in NWA. If above 2 steps are done then i think your are good to go. But be careful when you install certificate, it should be in proper order.
As you already mentioned, connectivity is already established and you are able to PIng/telnet from pi server, connectivity looks ok.
While sending request, if you are getting 401 unauthorized, below might be the reason -
1. Certificate not installed correctly or some missing steps
2. Partner or TP is not ready to receive it, some certificate issue in there side.
other than 401 means you are ok (As per certificate and Connectivity) - 403 and 500 errors are next stops.
403 - error because of encoding method.
500 - data issue.
Regards
Aashish Sinha

I am unable to open Photo on my MacBook Pro after installing ilife 11 from a disc. The message I get says "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?!

I am unable to open iPhoto on my Macbook Pro (OSX 10.9.3) after installing ilife 11 from a disc. The message I get is "you can't open the application iPhoto because it may be damaged or incomplete. What can I do?! Any help will be greatly appreciated.

Reinstall it.This time delete the receipts first.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Important:
As you're on 10.9.3 you'll need to update iPhoto to v9.5 before opening it. Use Software update.

Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help!

How can I stop the 'Adobe Reader Update' from constantly trying to download? It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!

Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously!
I did what you said now and it has worked, thanks so very much for getting back to me. I really appreciate your help!!
Can I ask you questions in the future or do I just do that through the forum?\
Thanks again, Jennie
From: Anubha Goel <[email protected]>
To: rubyrose1950 <[email protected]>
Sent: Sunday, April 26, 2015 10:42 PM
Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
|
You have been mentioned
by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha
Participate in the conversation by replying to this email
To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

Trouble with installing 10.5 from an external firewire drive

I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
And I partitioned my firewire hard drive without problems.
I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
Here's a recap of everything I've tried. I'm at a complete loss now!
- I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
- I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
- I've created the disk image using "restore" in disk utility. I've again tried this a few times.
- I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
- Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
- And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

I recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) how can i authorize the device ?

i recently got iphone 4 , yesterday i was trying to install an application from the itune store it say that i need to authorize it ( i already have an account and bought some apps ) and there was a CLICK HERE BUTTON , when i press on it it take me a to a page that require some kind of activation code or smthn like that ,
how can i authorize the device ?
and btw i bought it from UAE store
IOS 4.3.2

You should only make purchases for all your devices using a single Apple ID. There is no need, and indeed a good reason not to, set up a new Apple ID with each new device purchase. While items purchased under different IDs can be played on a single device, you cannot merge Apple IDs and it makes it cumbersome.
Apple IDs do not expire but may become dormant and require reactivation if they are not actively used.
You should make note of your Apple ID and passwords and keep a record of it. Like a bank account it contains access to items with value. Update your Apple ID email address as they change.
I see you were guided to this forum by a help page on recovering your password. If that is not sufficient try the links below. Apple will need to verify you are indeed to owner of the accounts to which you are trying to gain access.
http://www.apple.com/support/appleid/contact/
Contact Apple for help with Apple ID account security - http://support.apple.com/en-us/HT5699 "This article provides country-specific Apple Support contact information for customers seeking help with their Apple ID password or other security-related issues."
Frequently asked questions about Apple ID - http://support.apple.com/kb/HE37

Install Http Server in ORACLE 10g 10.2.0.3

Hi, before i had Oracle XE 10.2.0.1 and Apex 3.2 both worked ok. Now remove Oracle XE and APEX 3.2 and then installed ORACLE 10g 10.2.0.3 and Apex 4.0, but when i try to login to apex http://server:8080/pls/apex/apex_admin the login page not appears.
Before run apex with OC4J from developer suite 10g, but now i need to install some particular http server with the companion cd or something like that.
I guess i have to install http server and xml database from companion cd but which option have to choose.
Regards

Pl post details of your OS. If you installed 10.2.0.3, you will also need to install the HTTP server from the companion CD.
http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/overview.htm#CJAFEAJJ
http://www.oracle.com/technology/obe/apex/apexinst/apexinst.htm#t2
HTH
Srini

APEX on 10.2.0.3 & HTML Server from companion cd 10.2.0.1

Hi,
I am preparing to install Oracle Application Express(APEX) on already installed oracle 10.2.0.3 database on sun sparc(64) and hence I need to install Oracle HTML server also, as it's not already installed As I do not have access of Oracle 10.2.0.3 companion CD pack, Is it possible to download Oracle[b] 10.2.0.1 companion pack for sun sparc(64) from oracle download site and installed HTTP server instead of installing from 10.2.0.3 companion pack?
Do you thing there will be any compatibility issues ??
Appreciate your guidence.

Hi Scott,
Thanks for the reply. Sorry, I should have included in my example that I was using the begin and end code in the page processing section.
I'm trying to execute a procedure because of a bug in htmldb that won't let me update a table accross a database link when using htmldb from a 10g database to a 9i database. I can do inserts but not updates.
I was hoping that by executing a stored procedure that it would remove htmldb from the picture.

Trying to run code from this weeks question of the week

i've copied the code from this weeks question of the week "sending an http req from a normal class." when i compile it everything looks fine. i've installed tomcat and it works. so i guess i am confused as to where i put the servlet class file??? and do i need to change a web.xml file?
any help would be appreciated,
erik

for simplicity i just put Hello.class and HelloServlet.class in C:\tomcat\webapps\ROOT\WEB-INF\classes. i still cannot get this to work. here are my source files:
Hello.java:
import java.net.*;
import java.util.*;
import java.io.*;
public class Hello {
public static void main(String args[]) {
ObjectInputStream is;
URL url;
String uri =
"http://localhost:8080/HelloServlet";
HashMap hash = new HashMap();
try {
//calling the servlet by passing params
url = new URL(uri + "?&name=MyName&age=25");
// open input stream and read the hashmap
// returned by the servlet
is = new ObjectInputStream(url.openStream());
hash = (HashMap) is.readObject();
// print it out
System.out.println(hash);
} catch (Exception e) {
e.printStackTrace(System.err);
HelloServlet.java:
import java.util.HashMap;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class HelloServlet extends HttpServlet {
public void service(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
     // getting the parameters
String name = request.getParameter("name");
String age = request.getParameter("age");
     //putting them in a hashmap
HashMap hm = new HashMap();
hm.put("name", name);
hm.put("age", age);
     //returning them
try {
ObjectOutputStream p = new
     ObjectOutputStream(response.getOutputStream());
p.writeObject(hm);
p.flush();
p.close();
}catch (Exception e) {
e.printStackTrace();
can anyone see a problem. this code is supposed to be run from the command line. and i am doing that.
thanks for the help,
erik

Install Image Missing from List

I am trying to deploy Windows Embedded Standard 7 from our WDS server, built on Windows Server 2008 R2. I've added the install.wim file from the WES7 DVD, and I can see it listed under Install Images in the WDS control panel, but it doesn't appear
as an option on the client computer when I boot into PXE. I've also tried restarting the WDS service, as well as the
WDSUTIL /Update-ServerFiles command, to no avail.
Searches have given me 3 possible causes, all of which have been ruled out:
Wrong Architecture - I have tried both x86 and x64 client machines, and other x86 images are showing up and installing fine
File permissions - I have double-checked that users have write access to the folder holding the WIM files - again, other images in the same folder work fine.
HAL mismatch - the WES7 image has the same HAL type (acpiapic) as other images that are working.
Is there something I'm missing here? I'm using the boot.wim from the standard Windows 7 install DVD - does this make a difference?

Hi,
About the Embedded question please post to the Embedded support forum.
https://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecservicingdeployment
Thanks for your understanding and support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Install http sever from companion CD- question closed : )

Similar Messages

Maybe you are looking for