Install Hyperion SQR 11.1.2.2 on linux issue.SQR client grayed out install

SQR client options are disabled and not selectable while running installer on linux.
1)Does that mean we cannot create reports on linux machine.
2)Even in a windows zip for all clients SQR client is not present.It comes in part7 only.
So i need to have windows server where i can install SQR client using part1 and part7 and then
thru windows only i can cannot to my linux reporting server
3)why do we need to have identity management patch set 5 (as mentioned in 11.1.2.2 mediapack) on linux reporting server?
why is it needed?
Any suggestion in this regard?

Yes i have installed all the SQR components defined in media pack for 11.1.2.2 on my linux server except for Oracle identity management(i believe it'optional and not needed)
Surprisingly i am not able to run commands SQR or SQRT from linux command line.Also not able to find sh or ksh files for these commands which ideally should be
present in Hyperion_home/Biplus/SQR/bin/Server/Oracle/Bin(not exact) although some binary files(without any extension) with name as SQR is present on this path.
On windows machine i had just installed the client and this machine has exe for SQR present on the above mentioned path(ie 1 dll and 1 exe) but the linux server
has only dll part for SQR,SQRT,SQRP etc
I reconfigured the linux but still i am not able to run command SQR even from the server itself.Am i searching for command or sh file at correct location?
I used VNC and PUTTy for everything install/config and running commands from windows machine!
Edited by: hyp big bee on Apr 29, 2013 12:07 AM

Similar Messages

Install PT8.53 with Linux Issue: Jolt client (ip address 192.168.196.102) does not have proper application password

Folks,
Hello.
I am installing PeopleTools 8.53 with Oracle Database Server 11gR1 and OS Oracle Linux 5.10.
Data Mover Bootstrap and Application Designer can log into Database instance successfully. My procedure to run PIA is below:
Step 1: start Oracle Database Server and LISTENR is listening.
Step 2: start Application Server ./psadmin and 8 processes are started.
Step 3: start WebLogic Server PIA /opt/PT8.53/webserv/PT853/bin/startPIA.sh
In Browser, http://192.168.196.102:8000/ps/signon.html comes up successfully. But when sign in using UserID PSADMIN and password "myname", I get the error message in Browser as below:
The application server is down at this time.
CHECK APPSERVER LOGS. THE SITE BOOTED WITH INTERNAL DEFAULT SETTINGS, BECAUSE OF: bea.jolt.ServiceException: Invalid Session
We've detected that your operating system is not supported by this website. For best results, use one of the following operating systems:
Mac OS X 10.6(Snow Leopard)
Mac OS X 10.5(Leopard)
iPad
Oracle Linux Enterprise
Mac OS X 10.4(Tiger)
Windows 8
Windows 7
Mac OS X 10.7(Lion)
Regarding Application Designer, both Database Type "Oracle" and Connection Type "Application Server", UserID "PSADMIN" and password "myname" login successfully. I view TUXLOG (current Tuxedo log file) and its last screen is below:
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191723.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191724.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191725.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191726.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
191727.lucylinux.lucydomain!JSH.32462.2485226496.-2: JOLT_CAT:1626: "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password"
I View APPSRV_1023.LOG (current server log file) and its content is below:
PSADMIN.32259 (0) [2013-10-23T18:55:12.134](0) Begin boot attempt on domain PT853
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.701](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.32290 (0) [2013-10-23T18:55:35.923](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.32290 (0) [2013-10-23T18:56:19.256](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.504](0) Server started
PSAPPSRV.32290 (0) [2013-10-23T18:56:23.507](3) Detected time zone is EDT
PSAPPSRV.32338 (0) [2013-10-23T18:56:25.793](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.32338 (0) [2013-10-23T18:56:26.003](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_2/
PSAPPSRV.32338 (0) [2013-10-23T18:57:08.871](2) App server host time skew is DB+00:00:00 (ORACLE PT853)
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.662](0) Server started
PSAPPSRV.32338 (0) [2013-10-23T18:57:10.663](3) Detected time zone is EDT
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.159](2) Min instance is set to 1. To avoid loss of service, configure Min instance to atleast 2.
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.168](0) PeopleTools Release 8.53 (Li nux) starting. Tuxedo server is APPSRV(99)/100
PSSAMSRV.32388 (0) [2013-10-23T18:57:12.265](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSSAMSRV_100/
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.414](0) Server started
PSSAMSRV.32388 (0) [2013-10-23T18:57:59.416](3) Detected time zone is EDT
PSADMIN.32259 (0) [2013-10-23T18:58:48.149](0) End boot attempt on domain PT853
PSAPPSRV.32290 (1) [2013-10-23T18:59:06.144 GetCertificate](3) Returning context. ID=PSADMIN, Lang=ENG, UStreamId=185906140_32290.1, Token=PT_LOCAL/2013-10-23-11.59.26.248432/PSADMIN/ENG/vSz0ix+wq8d+zPRwQ0Wa4hcek0Q=
~
I think the error is indicated in TUXLOG file "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password". The application password "myname" in Browser http://192.168.196.102:8000/ps/signon.html page is not working. I use the same password "myname" to login Data Mover Bootstrap mode, Application Designer, and Application Server psadmin configuration successfully. I have tried a few other passwords in Browser http://192.168.196.102:8000/ps/signon.html page but not working.
My question is:
How to solve Sign In issue on http://192.168.196.102:8000/ps/signon.html that is "ERROR: Jolt client (ip address 192.168.196.102) does not have proper application password" ?
Thanks.

Dear Nicolas,
Hello. I have used the same password for "DomainConnectPswd" in the file Configuration.properties with that for Application Server setting. Eventually, UserID PSADMIN sign in http://192.168.196.102:8000/ps/signon.html successfully. PeopleTools 8.53 runs correctly in Browser.
It seems that whether upgrade Oracle Linux 5.0 to the latest 5.10 does not have effect !
I am very grateful to your great help for this installation of PT8.53 with Linux and Oracle Database !

Hyperion SQR - Create Word document reports

We are using Hyperion SQR Production Reporting v8.3. Does this have the ability to create a Microsoft Word document as a report?
If not, does a more recent version have support for creating Word document as a report?

SQR does not support creating word document. However you could check this link which might help as a workaround :
sqr report output file in microsoft word format - Toolbox for IT Groups

Hyperion SQR Production Reporting and EBS 11i

Hi all,
Is there a way to purchase only "Hyperion SQR Production Reporting", working with Oracle EBusiness Suite (11i) ?
The scope is to migrate Oracle Applications 11.0.3 to 11.5.10.2 (unix platform) including a lot of sqr specific programs (batchs and reports).
-> Instead rebuild them on pl/sql or XML Publisher, we plan to do this by upgrading sqr (actually v4.3.2 running on Oracle 8.0.5).
Thanks in advance for your help.

Please post to the BI Reporting Community

Is Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

s Oracle Hyperion SQR Production Reporting certified with Oracle 12 on the redhat linux ?

As per the support matrix Oracle 12 will be supported with 11.1.2.3.500. Check the support matrix at : Supported Platforms Matrices - Oracle Enterprise Performance Management System
Thanks,
KK

I am trying to install Iphoto on my new MacBook Air adn the install button is grayed out Any suggestions

I am trying to install iphoto 09 on my new MacBook Air and the install button is grayed out. Both for installation and custom install. Is there a problem that I am not aware of?

Check for receipts
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

After installing iCloud on PC, appointments are grayed out in my Outlook iCloud calendar; don't show up on iPad calendar but do show up on iPhone calendar

I have been working on this issue for DAYS and have searched the web and this support community but can find no answers. I have a PC, iPad, and iPhone. I installed iCloud on my PC so that I could sync calendars, contacts, and maybe tasks. Nothing I have tried has worked.
The iCloud calendar that appeared alongside my Outlook calendar on my PC has all of my Outlook appointments - but they are all grayed out.
The appointments that were on both my iPhone and my Outlook calendar are now grayed out on my Outlook calendar - but if I close my iCloud calendar in Outlook, these appointments are no longer grayed out. These appointments now appear twice on my iPhone.
The appointments in my Outlook calendar appear in my iPhone calendar but do not show up in iCloud in my web browser nor on my iPad (not even grayed out).
My contacts appear to have synced from Outlook to iPhone - but have not synced with iCloud online nor my iPad.
This is beyond frustrating.
Some basics:
Windows 7 Enterprise, 32 bit
Outlook 10
iCloud is enabled on the iPhone and iPad
phone and pad operating systems are up to date
I turned off and then restarted my iPad - didn't work
I turned off and then restarted my PC - didn't work
I uninstalled and then reinstalled iCloud on my PC - didn't work

I'm having the identical events...Outlook calendar entries grayed out on my PC installed iCloud and absent on my iPhone. iPhone entries do show up in Outlook.

Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message? How does one work around this?

Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
Select the ipsw file and let it restore.
If you dont have it downloaded then simply click on restore.
I hope it works
Cheers !

Can't Do a Fresh Install of Pshop From the CS2 CDs: Pshop App Install Option is 'Grayed Out'

I have CS2 Premium which I'm running on an older PowerPC Mac (G5 - Dual 2.3 GHz ) running OS 10.4.11. I've had this setup for many many years (registered/activated with Adobe) but suddenly one day I could no longer launch my Photoshop app: when I clicked on the Pshop icon it would start the launch (open) procedure ... and then almost instantly it would quit (in just a few seconds ... before the application even got to the 'title/credit' screen).
I've recently tried uninstalling CS2 (everything except Acrobat) and I ended up doing a manual uninstall of Version Cue. I've been on Macs for 20+ years so figured this would be a pretty straightforward procedure - uninstall -> reinstall and then back to work. Nope.
I'm attempting a fresh installation direct from the original CS2 CDs. In any event, when I try to (re)install CS2 - and after going through the standard screens with Adobe's usage terms agreement and installation hard disk selection - I arrive at the screen where one selects which application(s) to install by checking the various boxes (or alternately, to install the entire suite) but the 'Adobe Photoshop CS2/Adobe ImageReady CS2' line and checkbox are grayed out, so it will not allow me to check them and continue with the Photoshop installation process. Gah!!!
I've been struggling with this for hours .... with no progress.
Any ideas on what I need to do to enable Photoshop to be installed again?
Thanks a bunch,
-Lovegasoline
PS to Administration: I've been a forum member for about 6-7(?) years, but the site isn't accepting my user ID/password. I filled out the form to have my user ID sent to my email address, but it never arrived. I don't know what's up, but I had to re-register - I used my old user ID - in order to make this post.

I'm not sure if the crash is or isn't related to fonts.
Deciphering the crash long is something I don't have any experience with.
I'm not even sure how the crash log is structured. I've downloaded two screen captures: one from the top of the adobe Photoshop crash log and one from the bottom. Perhaps someone more knowledgeable than I can discern what may be causing the crash?
Screen capture from the top of the Adobe Photoshop crash log:
Screen capture from the bottom of the Adobe Photoshop crash log:
Any ideas?
Thanks a bunch.

How can I fix my grayed out wifi on my iPhone 4s after installing ios6?

How can I fix my grayed out wifi on my iPhone 4s after installing ios6?

APPLE PLEASE!!!!!!
WE NEED ANSWERS!!!!!
WHEN YOU WILL FIX IT THIS HUGE ISSUE!?!?!?!?!?!?!?!!?
I LIVE IN BRAZIL AND HERE DON´T HAVE AN OFFICIAL APPLE STORE!!!!!
WE NEED A SOLUTION FASTER!!!!!!

Reconfiguring Hyperion after DB move from Solaris to Linux

Our Hyperion Databases are moving from Solaris to Linux. We need to reconfigure Hyperion EPM to point to the new Linux DB. We have 4 Hyperion servers A,B, C, D.
Server A : Foundation Services, Workspace ,Reporting & Analysis, Planning, Calc Manager, Shared Services, EAS, APS.
Server B : EPMA, Essbase studio
Server C: ODI, FDM
Server D: Essbase
We are planning to do the below steps :
1) Stop all Hyperion services .
2) Stop databases on Solaris servers.
2) Configure Foundation first on foundation services server ( server A) , using EPM system configurator.
3) Configure Foundation on the other 3 servers( B, C,D) which are having EPMA, FDM, Essbase etc.
4) Foundation- Deployment to applicaiton server in foundation services server ( Server A).
5) Configure/deploy DB for rest of the products.
We tried to do similar steps last time. We were able to do foundation but for other products it failed. Please let us know if these steps are correct?
We are on Hyperion 11.1.2.2.300 version. O/S is Windows 2008 64 bit.

You should just need to follow the documentation:
Changing the Shared Services and Registry Database Connection Information and Password
Changing EPM System Product Repository Database Connection Information and Passwords
If there are problems following those steps then post the errors from the logs.
Cheers
John

More than 50 MB sized applications are grayed out with status of "Waiting/Installing", when we update those apps from WiFi Connection?

Hi,
Few application updates are available in iOS App store. However, Those applications are grayed out with status of "Waiting/Installing", when we update those apps from WiFi Connection. It's happening only for more than 50 MB sized applications. Unable to install those application through WiFi, However, it's successfully installed through MacBook Pro iTunes application. Please suggest me, why this happening suddenly.
Thanks in Advance,
Suresh Balakrishnan.

- If I make the deployment required, it will install right away regarless of maintenance windows. However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.
Re-check your deployment, specially the user experience:
If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
maintenance windows.

HT4623 After I press general, I see everything but Software update. Download and install does not even appear, it's not grayed out. There is no Software update button. Why is that?

I have an iPod touch 4G. I have been trying to skype with my friends with skype 5.0 and I was the only one that could not download it. Then I researched why and it says I need iOS 5.0. I then went back to research how to download it and on here it says that it should be in setting under general and then you will see software update. That if I don't have any room I will see download and install grayed out. But not even software update is there. There's no button. It basically does not exist on my iPod 4. Why is this?

That is only a feature of iOS 5 or later...
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
And Here...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

No Sound/Can't Install SB 0220 5.1 Digital. Multimedia Grayed out Please h

<pre>I have sent this to Creative so they can help me directly but</pre><pre> they sent me an e-mail back telling me that they will no longer support this </pre><pre>?Based upon the age of your product, it appears that you are beyond our </pre><pre>Complementary email and telephone support period as outlined below? </pre><pre>-Creative</pre><pre>?</pre><pre>And that</pre><pre>?Tutor session is only $2.99 and covers any one issue with which you </pre><pre>want assistance and lasts up to 30 minutes? -Creative</pre><pre>?</pre><pre>Here is the Original Description of my problem.</pre><pre>?</pre><pre>?Detailed Problem Description: </pre><pre>?</pre><pre> I have done a fresh install of windows xp and upgraded it to SP2 and </pre><pre>had to reinstall all my hardware and drivers. When I try to install my </pre><pre>Creative Sound Blaster I get no sound. When I open the control panel </pre><pre>Everything under multimedia is grayed out. In addition when I do the </pre><pre>Creative Diagnostics test I get the following. </pre><pre>?</pre><pre>Hardware Detection Test ? Pass </pre><pre>Wave driver Test ?? Fail</pre><pre>MIDI Driver Test ?? Fail</pre><pre>Mixer Driver Test ??? Fail </pre><pre>DirectSound3D Test?? Fail</pre><pre>SoundFont Setting Test?? Pass </pre><pre>Mixer Settings Check ?? Fail. </pre><pre>?</pre><pre>I have already done a Clean Sweep, Cleared my system reg of all </pre><pre>Creative Items, used CTZAPXX to both uninstall (per the clean sweep </pre><pre>info) and reinstall the drivers but nothing seems to work. </pre><pre>?</pre><pre>Also if I try to install one of the driver packs from the web site I get the following</pre><pre>error </pre><pre>?</pre><pre>'Setup could not detect any Sound Blaster Audio card on your </pre><pre>System. Please ensure that your Sound Blaster hardware is properly </pre><pre>Installed before running this setup program. setup will now exit'</pre><pre>?</pre><pre> I have been trying to fix my Sound card on and off for the last 4+ months.</pre><pre> Any help would be nice. Also note that I have searched the forums and the </pre><pre>web for any solutions but nothing seems to work. </pre>?
Any help with this issue would be great. I?m about to just spend that 3 dollars on the
Creative session on a new non-creative sound blaster card that doesn?t have these issues.
Some additional information that might or might not be helpful is that I don?t have windows
XP on my C dri've but on my a separate partition I created on my C:\ the G:\.
I have disabled my onboard sound card.
I have even deleted creative from my registry to see if that would help and still nadda.
Message Edited by Oncidium on 2-26-20062:34 PM

Ok, so I installed windows XP sp and all the hardware drivers video card, network card etc... I installed the Sb 0220 drivers from the cd and everything works perfectly now. So I guess if anyone is having the same problem as me the fix is installing windows XP w/o Sp2. I will be updating this partition to sp2 and will keep everyone updated if the audio card craps out on me. Do note that I installed the drivers with CTZAPXX by going to X:\Audio\Drivers\CTZAPXXX (x being where your CD/DVD dri've is) Clicking driver installation/WDM Drivers and ok. So far it looks like the problem with the sound blaster not working was either A: Windows being installed on a different partition than C:\ or B: Service pack 2 is screwing the drivers up with my current computers configuration. As I said before I will update this thread when I find out if SP2 makes the thing crap out again.

Iphoto still grayed out after iphoto upgrade after mavericks install, what should I do?

After upgrading to mavericks Iphoto was Grayed out. The computer Notified me that I would have to upgrade iphoto from 9.2.1 to to latest version.
went to the mac app store, the upgrade page showed the iphoto upgrade, it downloaded and installed the upgrade but iphoto is still grayed out in the dock and in the applications folder. The mac app store shows the iphoto upgrade as being installed. whot should I do?

First, make sure the new copy of iPhoto was not installed as a separate icon in your Applications folder.
If that's not the case, try launching it anyway; I've seen instances where the icon fails to update until the associated application is launched for the first time.

Install Hyperion SQR 11.1.2.2 on linux issue.SQR client grayed out install

Similar Messages

Maybe you are looking for