Install IAS 9i in Readhat linux AS 2.1

I need the URL of this page o document
install IAS 9i in Readhat linux AS 2.1
and I need a guide to install IAS in linux Suse 8.1
Thanks
Regards
nahald

i could be useful:
http://oracle.com/forums/thread.jsp?forum=135&thread=176549&message=458623&q=626172656e6361#458623

Similar Messages

Installing iAS 9 v. 1.0.2 on RH 7.0

Trying to install iAS 9 v. 1.0.2 on a RH 7.0 gives the following error when I run ./runInstaller:
Initalizing Java Virtual Machine from /tmp/OraInstall0/jre/bin/jre. Please wait...
SIGSERV received at bfffdfd4 in /tmp/OraInstall0/jre/lib/linux/native_threads/libjava.so. Processing terminated
Writing stack trace to javacore1016.txt ... OK
It's a upgraded RH 7.0 with all the RedHat recommended bug and security fixes.
I've tried the glibc-2.1 trick, but it doesn't help.
Can anyone help? I can send a copy of the stack trace if it helps.
Thanks,
Christian Bjxrnbak

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by bjornbak:
Trying to install iAS 9 v. 1.0.2 on a RH 7.0 gives the following error when I run ./runInstaller:
Initalizing Java Virtual Machine from /tmp/OraInstall0/jre/bin/jre. Please wait...
SIGSERV received at bfffdfd4 in /tmp/OraInstall0/jre/lib/linux/native_threads/libjava.so. Processing terminated
Writing stack trace to javacore1016.txt ... OK
It's a upgraded RH 7.0 with all the RedHat recommended bug and security fixes.
I've tried the glibc-2.1 trick, but it doesn't help.
Can anyone help? I can send a copy of the stack trace if it helps.
Thanks,
Christian Bjxrnbak<HR></BLOCKQUOTE>
If you applied all recommended patches from redhat you probably use glibc 2.2-9.
However jre 1.1.8 doesn't work with this version of glibc. Downgrade to glibc 2.1.92-something (the original version supplied with RH7.0) and OUI will work.
Success.
Arnout Koot.
null

Cannot install IAS 1.2.2.1 (SIGILL 4* illegal instruction)

Cannot install IAS 1.2.2.1 (SIGILL 4* illegal instruction)
I'm trying to install IAS 1.2.2.1 on a Linux Server (RH 7.1, kernel 2.4.2-2,
Intel) with 512 Mb Ram.
I've followed al Pre-Installation notes and requirements but when I'm doing Enterprise edition install I always get :
SIGILL 4* illegal instruction
     stackbase=0xbffff310, stackpointer=0xbffff0e8
Full thread dump:
"TaskScheduler timer" (TID:0x43dfd648, sys_thread_t:0x50965e0c, state:CW) prio=5
     java.lang.Object.wait(Object.java)
     oracle.ewt.timer.Timer._waitTilScheduled(Unknown Source)
     oracle.ewt.timer.Timer.run(Unknown Source)
     java.lang.Thread.run(Thread.java)
"Thread-6" (TID:0x44051e20, sys_thread_t:0x50944e0c, state:CW) prio=10
     oracle.sysman.oii.oiit.OiitLockHeartbeat$HeartBeatThread.run(OiitLockHeartbeat.java:108)
"Thread-5" (TID:0x44053ee0, sys_thread_t:0x5083ce0c, state:CW) prio=10
     oracle.sysman.oii.oiit.OiitLockHeartbeat$HeartBeatThread.run(OiitLockHeartbeat.java:108)
"CursorIdler" (TID:0x4404d0d0, sys_thread_t:0x509a7e0c, state:CW) prio=5
     java.lang.Object.wait(Object.java)
     oracle.ewt.timer.Timer._waitTilScheduled(Unknown Source)
     oracle.ewt.timer.Timer.run(Unknown Source)
     java.lang.Thread.run(Thread.java)
"AWT-Finalizer" (TID:0x4403d500, sys_thread_t:0x50986e0c, state:CW) prio=9
     java.lang.Object.wait(Object.java)
     sun.awt.AWTFinalizer.run(AWTFinalizer.java:40)
"Screen Updater" (TID:0x4403a700, sys_thread_t:0x50923e0c, state:R) prio=4
     sun.awt.ScreenUpdater.nextEntry(ScreenUpdater.java:73)
     sun.awt.ScreenUpdater.run(ScreenUpdater.java:90)
"AWT-Motif" (TID:0x440299d8, sys_thread_t:0x507fae0c, state:CW) prio=5
     java.lang.Thread.run(Thread.java)
"AWT-Input" (TID:0x440299f8, sys_thread_t:0x507d9e0c, state:R) prio=5
"AWT-EventQueue-0" (TID:0x44029a10, sys_thread_t:0x507b8e0c, state:CW) prio=5
     java.lang.Object.wait(Object.java)
     java.awt.EventQueue.getNextEvent(EventQueue.java:126)
     java.awt.EventDispatchThread.run(EventDispatchThread.java:70)
"Finalizer thread" (TID:0x44023210, sys_thread_t:0x50445e0c, state:R) prio=1
"Async Garbage Collector" (TID:0x44023258, sys_thread_t:0x50424e0c, state:R) prio=1
"Idle thread" (TID:0x440232a0, sys_thread_t:0x50403e0c, state:R) prio=0
"Clock" (TID:0x44023088, sys_thread_t:0x503e2e0c, state:CW) prio=12
"main" (TID:0x440230b0, sys_thread_t:0x80bf800, state:R) prio=5 current thread
     ssgetenvux.performQuery(ssgetenvux.java:36)
     oracle.sysman.oii.oiis.OiisCompContext.doQuery(OiisCompContext.java:1301)
     CompVariables.display_getCalculatedValue(CompVariables.java:386)
     CompVariables.getCalculatedValue(CompVariables.java:235)
     CompContext.getCalculatedValue(CompContext.java:117) SIGILL 4* illegal instruction
     oracle.sysman.oii.oiis.OiisVariable.getCalculatedValue(OiisVariable.java:515)
     oracle.sysman.oii.oiis.OiisVariable.setVariable(OiisVariable.java:984)
     oracle.sysman.oii.oiis.OiisCompContext.doOperation(OiisCompContext.java:578)
     oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     oracle.sysman.oii.oiic.OiicCompsWizEngine.doOperation(OiicCompsWizEngine.java:117)
     oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:689)
     oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:140)
     oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:511)
     oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:111)
     oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:116)
     oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:307)
     oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:468)
Monitor Cache Dump:
<unknown key> (0x0x5083ce0c): <unowned>
     Waiting to be notified:
     "Thread-5" (0x5083ce0c)
java.awt.EventQueue@1141021280/1141381480: <unowned>
     Waiting to be notified:
     "AWT-EventQueue-0" (0x507b8e0c)
sun.awt.AWTFinalizer@1141101824/1141788080: <unowned>
     Waiting to be notified:
     "AWT-Finalizer" (0x50986e0c)
oracle.ewt.timer.Periodic@1141166264/1142130568: <unowned>
     Waiting to be notified:
     "CursorIdler" (0x509a7e0c)
oracle.ewt.timer.Timer@1138742656/1153265144: <unowned>
     Waiting to be notified:
     "TaskScheduler timer" (0x50965e0c)
<unknown key> (0x0x50944e0c): <unowned>
     Waiting to be notified:
     "Thread-6" (0x50944e0c)
sun.awt.motif.MToolkit@1141021336/1141381216: <unowned>
     Waiting to be notified:
     "AWT-Motif" (0x507fae0c)
Registered Monitor Dump:
Verifier lock: <unowned>
Thread queue lock: <unowned>
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Dynamic loading lock: <unowned>
Monitor IO lock: <unowned>
Child death monitor: <unowned>
Event monitor: <unowned>
I/O monitor: owner "AWT-Input" (0x507d9e0c, 1 entry)
Alarm monitor: <unowned>
     Waiting to be notified:
     "Clock" (0x503e2e0c)
Monitor registry: owner "main" (0x80bf800, 1 entry)
Thread Alarm Q:
sys_thread_t 0x507fae0c [Timeout in 19 ms]
sys_thread_t 0x507d9e0c [Timeout in 169 ms]
sys_thread_t 0x50944e0c [Timeout in 853 ms]
sys_thread_t 0x5083ce0c [Timeout in 857 ms]

I have completed an installation. I had to install from the CDs and deselected the portal from the automatic start and configuration option screen.
Also ksh is needed for the discover4 configuration. It took about 4hrs installing from the CDs.
Now I have problems starting apache, getting unresolved symbols loading some of the modules.

Problem installing iAS 6.0 SP1 on HP-UX 11.0

I am trying to install iAS 6.0 SP1 on HP-UX 11.0. I could install iWS and directory successfully but iAS installation is failing by throwing the following error.
aCC runtime: ERROR: _main() not called
11. Register_NASA[25]: nawk: not found
in this aCC means ANSI C Compiler. does it mean that it requires ANSI C Compiler. kas, admintool,deploytool are working fine. no problem with directory also. i couldn't start KJS. i tried starting KJS by executing ./kjs in ias/bin, then it throwed the following error
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 16
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 32
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 128
[16/May/2002 11:26:55:8] error: DATA-100: priority not set in the registry for driver 256
I don't know where i went wrong. can any body trace the reason this problem. thanks in advance
regards
Ananda Rao

Hi.
when you say you have installed weblogic on the same machine several times and it worked, do you mean you have installed wls
6.1 sp1? Or do you mean you have installed other versions? If you have installed this version before then you might try
reinstalling with a fresh download of the install binary.
If you are still having problems then you might want to open a case with support.
Regards,
Michael
Nalika wrote:
Hi all,
I am getting following exception when installing WebLogic 6.1 sp1 in HP-UX 11.0.
Installing WebLogic ISV License on hpdln001.
Please wait and do not interrupt ....
Done!
bad document for elName=license-group doc=null ...returning null...
java.lang.NullPointerException
at com.bea.installer.registry.LicenseMerger.merge(LicenseMerger.java:96)
at com.bea.installer.registry.LicenseMerger.main(LicenseMerger.java:372)
After that WebLogic server does not starts by giving following error
Starting WebLogic Domains.
SHLIB_PATH=/space/hpdln001-1/v7/bea/wlserver6.1sp1/lib/hpux11:/space/hpdln001-1/v7/bea/wlserver6.1sp1/lib/hpux11/oci816_8
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
Missing license file for: WebLogic Server 6.1
I presume that I do have a correct license file since I already installed WebLogic
in same machine several times & it worked fine. I have installed almost all the pathes
to HP machine.
Thanks
Nalika--
Michael Young
Developer Relations Engineer
BEA Support

Error on Install Oracle9i R2 on RedHat Linux 7.3

When I have installed Oracle9i R2 on RedHat Linux 7.3,I reboot the machine,
and then write this:
sqlplus
SQL> sys /change_on_install as sysdba
SQL>Connect to Iddle
SQL>startup
SQL>sltln:environment variable cannot be evaluated
What`s the matter?
thanks

Looks like some file that's present in tmp or
/var/tmp during deployment cannot be overwritten
because of permissions issue. Please make
sure you don't have previous installation temp files
in /var/tmp or /tmp before doing new installation or
use the same use that installed the first instance.
You can try cleaning up tmp and /var/tmp and retry.
Also try setting umask 00 before installations.

[SOLVED] Installing Windows XP after Arch Linux

I'm not sure at all where to post this, so I've decided to do it here since I have the problem on a laptop... Please move if it should be somewhere else.
I installed Arch Linux on my new laptop a month ago or so, and am very pleased to have found the very kind of distro I've been looking for. However, I'm having trouble with my graphics (either wine doesn't support it, or the drivers don't have 2D/3D acceleration), and now I want to install Windows XP next to Arch Linux.
Using a GParted LiveCD, I've repartitioned the harddrive as such: Unpartitioned Space (27GB), Linux (197GB), SWAP (5GB).
I've also removed the bootable flag from the Linux partition, just to be sure. However, when I try to install Windows XP, it gets stuck after unpacking a bunch of drivers, giving me a bluescreen that tells me to make sure the hardware isn't broken, check my harddrive with CHKDSK /F, or look for viruses. Ofcourse I know none of these are true, since I'm running Arch Linux just fine.
A friend suggested that maybe my hardware isn't supported by Windows XP, which sounds like the most reasonable explanation so far, but I can't find a list of supported hardware. The M$ homepage basicly says
"Pentium 233-megahertz (MHz) processor or faster (300 MHz is recommended)"
for CPU, which doesn't help me at all.
My hardware is:
Processor: Intel Celeron 2.2 Ghz
Memory: 2GB DDR2
Graphics: Intel 4500MHD
And the laptop is called an "eMachines E525", though that doesn't say much since there are very, very many called this.
Can anyone give me any hints as to what I might be doing wrong?
Last edited by Noxic (2010-05-29 18:44:32)

Sounds like something I'll want to do. Where did you download the drivers? Do I have to follow some guide? Thanks for the tip
EDIT:
Indeed I will want to install AHCI drivers, otherwise Arch Linux fails to boot quite badly. There is also a problem preventing me from booting when I'm using AHCI though;
At boot, Arch Linux checks /dev/sda1 (NTFS) for errors, and expects to check an ext2 filesystem. Obviously, however, /dev/sda1 is an NTFS filesystem.
Since it tries to read the NTFS partition as an ext2 filesystem, it panics. Arch Linux then prompts me for the root password (or Ctrl+D to reboot), but I've disabled root login and can therefore do nothing at this point.
I have a GParted livecd and the Arch Linux livecd, so editing files on any of the filesystem isn't a problem at all, but I don't know what to do at this point. Help?
Last edited by Noxic (2010-05-29 12:40:33)

Error While Installing ORACLE 10g in Redhat Linux 5.0

Hi all,
Anybody please guide me regarding the posted error.
I'm trying to install ORACLE 10g in Redhat Linux 5.0 and finding error as "Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2009-10-15_09-20-56PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
I tired a lot to sort it out but unable to resolve.So please tell me the possible ways.
I appreciate all types of clarifications...
Thanks in Advance
Sajeev George

Sajeevcmc wrote:
Hi,
Thanks for the reply.
Could you please tell me the rpm full name and where i can download the same?
Thanks in Advance
SAJEEV GEORGEYou need to have the following packages installed already before starting Oracle installation
http://download.oracle.com/docs/cd/B19306_01/install.102/b15669/pre_install.htm#sthref80
binutils-2.15.92.0.2-10.EL4
compat-db-4.1.25-9
control-center-2.8.0-12
gcc-3.4.3-9.EL4
gcc-c++-3.4.3-9.EL4
glibc-2.3.4-2
glibc-common-2.3.4-2
gnome-libs-1.4.1.2.90-44.1
libstdc++-3.4.3-9.EL4
libstdc++-devel-3.4.3-9.EL4
make-3.80-5
pdksh-5.2.14-30
sysstat-5.0.5-1
xscreensaver-4.18-5.rhel4.2
And from the following link, you can get the same list:
http://www.puschitz.com/InstallingOracle10g.shtml (Go to Checking Software Packages (RPMs))
And from my installation guide you can easily install Oracle on Linux by following step by step instruction
[Step by Step Installing Oracle Database 10g Release 2 on Linux (CentOS) and AUTOMATE the installation using Linux Shell Script|http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Error message while installing JDK on RED HAT - linux interprise 5

Hello!
I have got an error message while installing JDK on RED HAT - linux interprise 5:
[user@localhost Desktop]$ cd jdk-6u22-linux-i586-rpm.bin ./jdk-6u22-linux-i586-rpm.bin
bash: cd: jdk-6u22-linux-i586-rpm.bin: Not a directory
[user@localhost Desktop]$ ./jdk-6u22-linux-i586-rpm.bin
Unpacking...
Checksumming...
Extracting...
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP ([email protected]).
inflating: jdk-6u22-linux-i586.rpm
inflating: sun-javadb-common-10.5.3-0.2.i386.rpm
inflating: sun-javadb-core-10.5.3-0.2.i386.rpm
inflating: sun-javadb-client-10.5.3-0.2.i386.rpm
inflating: sun-javadb-demo-10.5.3-0.2.i386.rpm
inflating: sun-javadb-docs-10.5.3-0.2.i386.rpm
inflating: sun-javadb-javadoc-10.5.3-0.2.i386.rpm
error: can't create transaction lock on /var/lib/rpm/__db.000
Installing JavaDB
error: can't create transaction lock on /var/lib/rpm/__db.000
Done.
What is the problem?
Thanks!

Good point.
Moderator action: thread locked.

Install JSC on a remote linux

Hi.
Did anybody install JSC on a remote linux exporting the X?
I want to install it on our department server (my machine has not memory enough) but, although the X windows are correctly exported (xclock works fine) when i try to execute the installer i get:
El instalador no se ha podido ejecutar en modo gr�fico. Intente ejecutar el instalador con el distintivo -console o -silent.
Then i try with "-console" but i get:
The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
WARNING: could not delete temporary file /root/ismp001/4095551
Thanks

I've tried to install it on the server itself, starting the X on it. The errors are the same, so it is not an error about exporting the X...
OK, the problem was solved with the instructions from
http://blogs.sun.com/marcoscorner/entry/creator_2_0_ea_on

Cannot install Tuxedo8.1 on RedHat Linux 9.0

I encounterd an error during install Tuxedo8.1 on RedHat Linux 9.0
cf, Tuxedo8.1 is downloaded from your download sites for trial.
[tuxedo@tuxedo-server install]$ sh tuxedo81_linux.bin
Preparing to install...
The included VM could not be uncompressed. Please try to download
the installer again and make sure that you download using 'binary'
mode. Please do not attempt to install this currently downloaded copy.
I tried to install Tuxedo8.1 on Linux Enterprise Edition(tuxedo81_inlnxa21.bin).
And It failed.
Thans in advance

eklee <[email protected]> wrote:
I encounterd an error during install Tuxedo8.1 on RedHat Linux 9.0
cf, Tuxedo8.1 is downloaded from your download sites for trial.
[tuxedo@tuxedo-server install]$ sh tuxedo81_linux.bin
Preparing to install...
The included VM could not be uncompressed. Please try to download
the installer again and make sure that you download using 'binary'
mode. Please do not attempt to install this currently downloaded copy.
I tried to install Tuxedo8.1 on Linux Enterprise Edition(tuxedo81_inlnxa21.bin).
And It failed.
Thans in advanceTry below commands in RH9,
cd /bin
ln -s gunzip uncompress
then retry the installation process.
Wei.C

It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10

hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.

Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java

Unable to Install Oracle 9i on redhat linux 9

Hi everybody,
I had been trying to install Oracle 9i on redhat linux 9 since last month and I am not able to succeed in installing the same. In fact I do not get to see even the OUI screen . I give below the steps I followed.
1) Setting of env varibles pertinent to oracle., say ORACLE_HOME,NLS_LANG etc.
2) PATH=$PATH:/usr/local/jdk1.3.1/bin:.
3) export LD_ASSUME_KERNEL=2.4.1
I have a set of 3 CD's for installation. As soon as I load the first CD. the runInstaller would run for sometime and stop, while I do the installation in the graphic mode.
When I try to install the same in the command line mode, I get to see something like the one below
Initializing java jre from /tmp/OraInstall0/... please wait.. and then it would come back to the command prompt.
I then invoke ps -ef | grep -i oracle to check if some process is running and I do get to see something. But ultimately nothing happens.
Please help me with this.

At Oracle Site we have a very good manual for 9i installation. Follow the manual step-by-step.
Your problem seems as a java or permissions issue.
good luck
Eduardo

Can you install Oracle 10g on REDHAT LINUX ENTERPRISE WS?

According to oracle documentation, it says you can install oracle10g on Redhat enterprise version 3 or 4, but it doesn't specify whether its Red Hat Enterprise Linux AS or WS. Can you install oracle 10g on Rehat Linux Enterprise WS?

Oracle Certificaction Matrices says only RedHat AS/ES is supported for database. AFAIK WS means workstation.
Also this link is very clear: http://kbase.redhat.com/faq/FAQ_61_1135.shtm
Besides the above sentences... If the WS installation is providing all required packages (listed in installtion prerequisites) I belive that Oracle DB could be installed on WS but as I (and the above link) said it is not officialy supported.

How to install oracle 11g on oracle linux 6.1.

Hello everyone here at oracle forum.!
I'm new on using the linux and i badly need to learn it including the Oracle Database for making PHP website.
Because of this i downloaded all the packages of Oracle Linux Release 6 Update 1 Media Pack for x86 (32 bit) at E-Delivery.
Now i was having a hard time figuring out how to install all the 4 ISO images. the only one that worked was was the boot.iso that installed the Oracle Linux 6 without the DB.
So what would i do to use the 3 updates?
I burnt them all one by one on different DVD but it wont look for the other packages.
So please guys bare with me and help me figure out how to use the other 3 packages for i know it has the Oracle Database.
Oracle Linux Release 6 Update 1 source DVD 1 V26570-01
Oracle Linux Release 6 Update 1 source DVD 2 V26571-01
Oracle Linux Release 6 Update 1 Boot iso image for x86 (32 bit) V26573-01

Oracle Linux does not install any Oracle Database. You don't need the source and boot.iso DVD. You can boot and install the system from the Oracle Linux 6.1 installation DVD. The boot.iso is useful for a network install and the source DVD if you want to compile everything yourself.
As far as I know, Oracle Database has not been certified for Oracle Linux 6 yet. That does not necessarily mean you cannot install Oracle Database on Oracle Linux 6 yet, but you will run into problems with software requirements, package dependencies and perhaps incompatibilities, i.e. ext4 file system.
I think your best option is to install Oracle Linux 5 and certainly use Oracle VirtualBox. If you are new to Linux you probably cannot use Linux as your primary OS yet, and VirtualBox will allow you to install and re-install without jeopardizing your primary host OS. You can also download pre-build virtual machines for Virtualbox from http://www.oracle.com/technetwork/community/developer-vm/index.html which might have everything you need installed and ready to use.

How to install Oracle client on UBUNTU LInux

Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it and is there any other tool which i can install instead of oracle client?
Regards,
RJiv.

RJiv wrote:
Hi,
I want to install oracle client on ubuntu linux. Which version of oracle client works on it All recent Oracle version support different Linux flavours
The problem is Oracle usually don't provide direct Oracle Client download except for Windows. You need to download the Server installation file and install the client piece. The download files are rather large.
and is there any other tool which i can install instead of oracle client?It depends on what you plan to do with Oracle client and why you need it.
On alternative is instance client, it has direct download for all supported platform.
http://www.oracle.com/technology/software/tech/oci/instantclient/index.html

Install IAS 9i in Readhat linux AS 2.1

Similar Messages

Maybe you are looking for