Install Intel Leopard on PPC Tiger iMac?

My G5 iMac PPC hard drive needs to be replaced. It came with Tiger. I have the Leopard Install Disc that came with my other new Intel iMac. Can I install that Leopard onto the new internal hard drive on my PPC iMac?

This is not strictly true. Here is my earlier post on the matter:
I don't know much about the various Apple license agreements but I suspect these matters may not be as black and white as some appear to believe.
It is certainly the case that Apple require normal single licenses to be transferred with all associated media but this may not be completely enforceable in all jurisdictions.
It would be wrong to assume that possession of a DVD etc is any indication of license ownership or the right to use it. For example Apple state that AMP agreements revoke the earlier license but they don't recover the old DVDs. My understanding is that educational software can be transferred and used legally by other educational users so here again possession of the DVD may not confer the right to use it, ie the person with the DVD may not be associated with education - what happens at the end of a student's course?
I am not sure if any of the volume licensing agreements permit licenses to be transferred. A quick investigation indicated that they are probably not transferable although this did not appear to be so clear for school licenses. Those unfamiliar with volume licenses may not be aware that the media and license are separate, eg a 1,000 seat license is supplied with only one media set although further media can be purchased at a nominal price.
Whatever the strict terms of their licenses eventually large concerns often sell their old computers with at least a working, although perhaps old, OS.
In my volume licensing world I do not assume that:
1 - possession of a DVD implies any right to use it
2 - the lack of a DVD implies software is unlicensed.
As long as we don't intend to promote or commit an illegal act I can see little reason to be too concerned with whether other contributors possess a particular DVD.

Similar Messages

  • Can I install Snow Leopard directly over Tiger?

    Running iMac 7,1 on Tiger (10.4.11). Have 1 GB RAM and a 2 GHz Intel Core 2 Duo processor. Can I install Snow Leopard
    directly over Tiger?

    Yes, you will be upgrading your system, take a look at this link, http://support.apple.com/kb/HT4949

  • I'm attempting to install snow leopard on my 2008 Imac and it stops installing less than 1/4 way through?

    I'm attempting to install Snow Leopard on my 2008 Imac and before it 1/4 way done installing, it ejects the disc and restarts the computer.  Is there something I am doing wrong?

    See:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

    Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

    McHagihara wrote:
    Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
    When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
    What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
    The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
    You can try to locate your problem without the erase and install method by running through this list of fixes.
    Step by Step to fix your Mac
    But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
    Most commonly used backup methods
    Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
    How to erase and install Snow Leopard 10.6
    If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
    Yuo might need to install more RAM into the machine to make 10.6 run better as well.

  • Cannot install Snow Leopard on Late 2006 iMac with 10.5.8

    I tried already two times to update my iMac (currently on OS X Leopard 10.5.8) to Snow Leopard. The update process runs for about 20 minutes. The iMac restarts, and then there's a message that Snow Leopard cannot be installed. One shall contact the software's manufacturer. I checked in the Installer log file and it says something like it could not u(n)mount a volume.
    There are 2 external hard drives connected to the iMac via FireWire (one for TimeMachine). Do I have to disconnect them before installing? There's also a TV tuner (DVB-S) from Terratec connected via USB and EyeTV (a version compatible to Snow Leopard) is installed. I already thought that it is maybe the EyeTV software (that came with the Terratec tuner) that prevents the installer from proceeding ...
    As stated, I gave it two tries:
    The first time I booted the iMac from an external hard drive with 10.5.8 installed on it, ran disk utility to check, repair permissions and verify the iMac's internal disk (--> everything was fine) and then inserted the Snow Leopard DVD and launched the installer.
    The second time I booted the iMac from its internal hard disk (with 10.5.8) (=the disk on which I wanted to install Snow Leopard), inserted the DVD and launched the installer.
    No success in both cases.
    Any suggestions, help ??
    Thanks a lot in advance!
    Rainer

    I think it will work if you restart from the Snow Leopard installation disc. Insert disc. Restart with the C key held down to force startup from the optical drive. You have already done a +Repair Disk+, which is a smart move before doing any system installation. So when Installer comes up, just proceed with the installation targeting your internal drive.

  • Installing Snow Leopard on a Vintage iMac that meets all the technical requirements

    I am trying to install Snow Leopard on "Vintage" iMac that is currently running 10.5.8.  I have the Snow Leopard DVD but when I put it in I get an error message that says "Mac OS X Snow Leopard cannot be installed on this computer".  I have already confirmed with Apple Tech Support that my system meets the requirements and should be able to run Snow Leopard.  Any suggestions? Is there another way to install the Operating System.  Tech Support said they couldn't help any further because it is a Vintage.  But they suggested posting a question to the apple community. 
    Any help would be greatly appreciated.  Thanks in advance!

    Try this first:
    Repair the Hard Drive and Permissions
    Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Now boot from your Snow Leopard installer and try the installation.

  • Installation Leopard snow on Tiger iMac

    I have a imac 10.4.11 (tiger) and I want to install leopard snow on it.
    I don't want to lose any files, pictures, music,... do I need to make a back up?
    I have already bought a time capsule, but it only works with 10.5 server or higher.
    Is there anyone who can help me please?

    Then you should be fine. The basic installation process is straightforward and will update your system without losing any data. Simply insert the installation DVD and double-click the 'Install' icon (this while still booted from your system).
    When installing, click 'Customize'.
    You may want to turn off Language Translations and X11
    You may want to turn on Rosetta (if you have any PPC-only applications) and QuickTime 7 (if you would like to retain this in addition to the QuickTime X player it will install).
    I should de-select all Printer Support options, except for "Printers Used by This Mac". Have your printer connected during the process.
    The installation process will copy data to your hard drive and then restart to complete the installation.
    You may find the odd program which isn't compatible with Snow Leopard: and you will find that your old print drivers should have been replaced by up-to-date ones, though some older printers will have to rely on the open-source Gutenberg driver.

  • Personal File Sharing failure between Leopard MBP and Tiger iMac

    Hi,
    I am attempting to give the iMac access to files on the Leopard using Personal File Sharing. Personal File Sharing is turned on on the MBP. The firewall on the MBP has been variously set for Essential Services Only and turned off. The firewall on the iMac is off (it has no internet connection). I have tried both encrypted and unencrypted ad-hoc wireless networking on various channels. I have tried ethernet. The results are always the same:
    1) the MBP will appear in the Network folder of the iMac, but any attempt to connect fails. I am unable even to reach a Drop Box.
    2) the iMac appears in the Shared section of the Sidebar on the MBP, and connections of all kind work without problems
    I have no internet connection in the house and am unable to try connecting both Macs to the same WiFi network for testing purposes. I have tried pinging each machine from the other using Network Utility, with failure reported in every case ---however, I'm led to believe this is not unusual in small network circumstances.
    One other piece of info that may be relevant: I am also struggling to have my iPod touch found by my MBP when attempting to use the WebDAV protocol to share files with Files Lite. My iMac connects to Files Lite without issue. Stanza Desktop also refuses to find Stanza. Cyberduck will find Files Lite on the network from the MBP (the only app to recognise it in any way from my MBP), but will consistently fail to connect. Perhaps this is related?
    Any help would be welcome. I can provide more information as needed. I have only offered the information I thought would be useful, and that fits within my layman's understanding of networking.
    Thanks.
    S.

    Hi,
    Well, it's all working fine now. Seems I /hadn't/ tried turning off the firewall on the MBP. The PFS now works with the firewall off or with "Set access for specific services and applications", but not "Essential services only".
    *shrugs* I was so sure I'd tried it with the firewall off…
    So, thanks! All is now kushti. I may have to grumble to myself a little (and ultimately to Apple) about the lack of co-operation between the firewall and the Sharing prefs, and what I perceive as a poverty (or at least poor layout) of information in the firewall settings pane, though. I mean, why can't the firewall automatically choose the correct setting depending on the Sharing preferences? Or, at least, provide a pop-up that such a change is necessary? Hmm…
    Ta!
    S.
    PS: FYI, "guest" sharing was already enabled, presumably by default.

  • Unable to install snow leopard  (update from Tiger)

    Yeah, I know, it's not exactly an original thread title. I'm running 10.4.11 on a Macbook. As far as I know I meet all the requirements except that I don't think I'll be able to benefit from OpenCL. Anyway, I got the yellow caution icon and a message saying I need to run disk utility and do a GUID partition but I'll lose all data. I don't have a backup so that's not a good option for me. I thought I saw a thread somewhere describing this problem at one of the other Mac sites but I can't seem to find it. Can anyone assist?
    Message was edited by: Victor Foster

    Not my intention to start so much consternation. I was just venting my disappointment. Actually, If I were to back up everything, I'd need at least 100 gigs of space, which leaves me 60 gigs. That might be a bit much for DVDs, etc. No worries. It may take me a month or two but I'll eventually get an external drive. That's been on my list of need to do for far too long anyway. I know how it is to lose everything as that happened to me not long ago. If I were to be selective, I could probably get away with just backing up about 60 gigs. but the conventional wisdom seems to be you need at least one half more space than what you back up, right? So I need a 200-250 gig external drive, I think. I also need a backup scenario for my Linux and Windows boxes but I want to start with the Mac since it's my primary machine. I'm just frustrated I've been unemployed so long but I'm not alone in that I'm sure, Well I guess that's it for now.
    Message was edited by: Victor Foster

  • Leopard install on a PPC G5 imac

    Hi, Can anyone tell me what I should get? I really want to run Leopard on my non intel based G5 PPC 20" Imac - 2005 I think. is this possible? if so, what DVD install should I be getting?
    thanks in advance!

    You should still be able to easily find a Leopard retail DVD in its original box,
    that is, a black DVD with an X on it.
    Do not buy a grey DVD as they are dedicated to specific computers which they were sold with.
    Any version of 10.5.x will be fine, as you'll be able to then update to 10.5.8 using Software Update.

  • Can I install Snow Leopard in my new 2013 iMac???

    Hello:
    Can I install Snow Leopard in my new iMac (2013)?
    Or will have problems with drivers of new iMac???
    Maverick is a potato!!! 200 New features but 200 or 300 lost features too !!!
    Thanks.
    Joseba

    Free updates to Pages and Numbers are available from the App Store. Sharing your iPhoto Library is another matter, discussed in iPhoto for Mac.

  • Need help installing Snow Leopard.

    Need help installing Snow Leopard on a 2009 iMac. Hard drive is only choice for location and message says hard drive can't be used because it is used for Time Machine backups. Ultimate goal is to upgrade to OS 10.6.8.

    Check to see if you have a file called backup.backupdb
    If you do that means at some time in the past Time Machine was configure to backup to that drive
    If that is not where you want your backup to to go, and it should not be stored there any way, then delete it and the install should work then.
    Allan

  • After installing Snow Leopard the speech application keeps quitting

    Hi everyone, I have recently installed Snow Leopard on my 06 iMac, installed all the latest updates.
    I then found that when I try to set up voice activation application: system preference–speech.
    The application opens for a few seconds and then unexpectedly quit. As I'm studying I use Acrobat reader
    to read documents back to myself. I am not sure if it has anything to do with my machine being a 32-bit machine, and Snow Leopard
    is mainly a 64-bit operating system. But I also find that the Read aloud option in the Acrobat reader does not work
    and causes acrobats also unexpectedly quit.
    Does anyone have any idea what is going on?
    Thank you
    SmileyD64

    kjo04 wrote:
    After installing snow leopard 10.6.8 my mail application will not open. It says you can not use this version of the application Mail with this OS X. You have Mail 3.6. What do I do? I thought everything would just automatically update... am I doing something wrong?
    I suggest visiting the following Apple Support Communities Thread, your problem is similar to the one described there...
    Re: Just installed snow leopard but i can't use mail b/c 3.6 version

  • Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from 2007 it came preloaded with tiger. I have original install tiger discs version 10.4.10. Is it safe to downgrade or not please help

    Hi, I want to downgrade from OSX LEOPARD to OSX TIGER but I have a few questions regarding this. My iMac is originally from Sep 2007 it came preloaded with tiger. I have original install (2) tiger discs version 10.4.10.  I want to know if it is safe and what are the necessary steps to do so. Also by downgrading im wondering if a lot of apps nowadays support tiger for example I have photoshop version 5 and 4 these are very important to me. One last question does anyone know of any reliable virus protection for mac that doesnt slow down your computer? because I have read that a lot of them do so. If anyone can help me I would greatly appreciate it! Here are the specs for my iMac 
    Model Name:
    iMac
      Model Identifier:
    iMac7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    4 MB
      Memory:
    2 GB
      Bus Speed:
    800 MHz

    Most of the time a perception of general slow performance is the result of installing third party junk alleged to speed up, "clean" or "optimize" your Mac, or to look for viruses that don't exist. Ideally you would know what you installed so you can uninstall it, but if you don't know or aren't sure there are techniques such as Safe Mode and creating a temporary user account to confirm that suspicion.
    If you open Activity Monitor it may show a process, or processes, that occupy a lot of your system's time.
    Slowness confined solely to web browser activity is often the result of an inexorable progress toward websites that demand ever more processor-intensive tasks. If your slow performance is strictly limited to web browsing, you might try disabling Flash by either uninstalling it, or use utilities such as ClickToFlash that allow you to control what Flash content gets loaded. Flash in itself is not inherently evil, but there is nothing to stop websites or the advertisers who pay for them from writing horrible Flash code that can do everything from hogging 100% of your CPU's time to causing random crashes. You can watch Activity Monitor as in the above to correlate these troublesome web pages with performance degradation.
    You are correct; if your computer shipped with Tiger you may certainly revert to it. I forgot that Tiger was shipping on new Macs as recently as five years ago. To downgrade it would be necessary to completely erase your hard disk and boot with the Tiger installation DVD, followed by installing it anew. Such drastic measures are not necessary and you are unlikely to be satisfied with the results anyway.
    Assuming your system is free of third party parasitic junk attached to OS X in an ill-conceived attempt to improve upon it, that your hard disk drive is sound and the boot volume has enough free space to work with, by far the best performance-enhancing improvement would be to add more memory. Buy as much as your computer can use and that you can afford. 2 GB is not that much any more.
    Read the following for some recommended troubleshooting techniques from Apple:
    General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
    Memory limitations: Using Activity Monitor to read System Memory and determine how much RAM is being used
    Identifying resource hogs and other tips: Runaway applications can shorten battery runtime
    Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?

  • Best way to move from PPC Tiger to Intel Leopard

    Hi,
    I am looking towards getting a new Mac soon. Right now I have a PPC eMac. That means all my software is non Intel. How does this affect the migration process? I have never, ever migrated before between computers so am pretty much at zero level of experience. Will the migration assistant just move files instead of programs?
    I have discs for my software and they are universal so it is my guess that I just reinstall the software on the new Mac. Then move the files over?
    Thanks for any tips on how to make this a smooth process.

    The differences in processors makes the migration not as easy and other posters have already given you good advice.
    I actually DID the G5 PPC Tiger to Leopard migration and after many (unsuccessful) attempts to achieve a stable Leopard by merely installing it "over" my Tiger volume, I ended up having to do the equivalent of "erase and install" (I simply bought a new harddrive disk [HDD] and installed a brandnew Leopard). Despite this, the IBM processor did not really "like" Leopard and repeated Kernel Panics (KP) started to occur resulting in loss of RAM and bus; too many issues having to run many programs under "rosetta". Also, some of the nicer features in Leopard (front row, bootcamp) did not work at all with the PPC architecture. Also Photoshop needed upgrading for Leopard and plugins need updates, too (check with Adobe and with e.g. Alien Skin)
    Having said that, I have heard of success stories of PPC and Leopard. (intersting article about "complexity of Tiger in a server": http://ls.berkeley.edu/mail/magnet/2008/0374.html might have a relevance to ordinary OS). So I am not trying to put you off, just giving you a first hand experience my own experience.
    I think you need to ask yourself:
    1) Is my machine not working satisfactorily? (If so, then why not try the upgrade)
    2) Why do I want Leopard (if you fancy a change, why not for it then)
    3) Is the upgrade essential? (It is nice to have something new, but you know, I do miss OS9, as that no longer works with Leopard unless you emulate with e.g. sheepshaver (see discussion:
    http://macosx.com/forums/mac-classic-system-software/296734-classic-os9-leopard. html)
    4) As always, there is always something "newer and better" (snow leopard: http://www.apple.com/macosx/snowleopard/)
    Good luck with your decisions
    NB: I am running Leopard with my Intel Mac Pro and am absolutely lunatic (=over the moon )
    Message was edited by: Alexandre

Maybe you are looking for

  • Issue with web publisher services

    hello, i try to use the bi publisher services and in particulary SecurityService(Jdeveloper 11.1.2.0.0 and publisher 11.1.1.5) . the security model is setting on Bi publisher security. i use the http://bipconsulting.blogspot.com/2010/04/how-to-use-bi

  • HT1444 my updates on apps wont work because it says i am using the canadian store, how do i change it to uk please

    I am trying to update my apps and it is telling me that I am connected to the Canadian store, how do I change it to uk store please

  • 2013 Run-Time error 32809 on macro

    I am unable to have a file open correctly that has 'automatic macros'.  The file work in 2010 and now I have the run-time error.  This workbook is created by outside source and is password protected. Thanks for any assistance.

  • Unable to recreate OEM repository

    Hi, I have a problem with Oracle Enterprise Manager. Environment description: Oracle 10g R2 Standard Edition on Windows Server 2003 R2 I dropped the OEM repository. After that I was trying to recreate it via D:\oracle\product\10.2.0\db_1\BIN>emca -co

  • Google Chrome Helper is not responding after Mavericks upgrade

    Since installing Mavericks on my 2011 Macbook Air, Google Chrome has frozen twice and activity monitor says this is due to a process called google chrome helper. Chrome Version 30.0.1599.101 The first time, I could not get my machine to respond so I