Install iOS5 to my iphone4, but cannot get past Connect to iTunes

Question

After installing the iOS5 system to my iphone 4, after synching through iTunes, the phone is locked on the "Connect to iTunes" page; cannot go any further. HELP!

Answer 1

Two things to consider when talking about routers - Reset means to return the router to factory settings - i.e. just like the day you took it out of the box. Reboot means to remove the power and then plug it back in. There is little need to Reset the router unless you really messed something up. Rebooting it, however, will clear up any errors that the router may have had.
To fix your problem, you need to do a few things:
1) Find out if your router has issued you an IP address. When you appear to be connected, tap Settings > WiFi > and then the blue ">" next to your network name. You are looking to see if the router supplied the touch with an IP address, subnet mask, router IP address, and DNS addresses. Chances are, you are going to see that some things are missing and your touch IP address starts with 169.x.
Next, run through the following 3 step process:
1. Reboot the router
2. Reset the touch network settings - tap Settings > General > Reset > Reset Network Connections
3. When the touch restarts, tap Settings > WiFi > Other and then re-enter your logon information
Check your touch WiFi settings again. If you IP address still starts with 169.x, then you have two things to consider. If you are using WEP, then changing your encryption to WPA2 would be the best router. If you are using anything but WEP, then upgrading your router firmware would be the way to go.
Write back if you continue to have problems.