Install ios7 on ipad2 when it says not enough disc space

When trying to install iOS 7 on my ipad, my ipad tells me not enough space. I have 2.3 GB in photo but I can't figure out how to move it to the cloud where I have 12 .2 gb available. How do I move this so I have enough space in my ipad for ios7?

Connect iPad to iTunes and Check For Updates (tap to enlarge image)

Similar Messages

Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping

Try to burn Blu Ray. It says: Not enough disc space

Hi everybody,
I try to burn a blu ray disc. My Blu Ray Writer is: HL-DT-ST BD-RE BH10LS30
I use 25GB BD-R Discs from Verbatim.
If I try to burn a 20GB *.iso file, every tool I tried says immediately: There is not enough disc space. What is wrong?
Even if I try to burn smaller files to Blu Ray, it always says: There is not enough disc space.
I'm confused
Regards
Maik from Germany

The 'There is not enough disc space' message appears immediately. It doesn't matter if the output file is 500MB or 20GB.
I tried different BD-R discs. It is always the same message.
I found a similar case:
I am trying to burn a blu-ray disc but having problems.
Do I really have to buy a 90$ tool so I can write my movie on BD-R?

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is ok and the 32 bit file was indeed created.

LR 5.5 upgrade. I only get the the 32 bit set up and an error when the 64 bit set up should be created. It says not enough disk space and no access to write. The disk space is okay and the 32 bit file was indeed created. I have Windows 7 Home edition.

Hi Rob, Thanks for your input. The temp location is on the C drive with 228 GB free space. My other drives have 123 GB and 204 GB of free space. I can see how the 32 bit set up is perfectly extracted when it stops when coming to the 64 bit set up. I have done the exercise several times and also made new downloads. I am using Norton 360 and Malwarebytes anti-malware but the dowload from Adobe should be trusted.

When transferring an 18 minute iMovie from my iPad to iTunes a message comes up saying not enough disk space to send 16917 mb more space needed. How do I overcome this?

When transferring an 18 minute iMovie from my iPad to iTunes a message comes up saying not enough disk space to send 16917 mb more space needed. How do I overcome this?

Is there enough room on the target disk?
Can the target disk accept files over 2Gb?

"Not enough disc space" when exporting

Hello all -
I am running iPhoto 2.0.1 with OX 10.3.9. My hard disc has 40GB.
Every once in a while, when I try to export a large number of photos into a desktop folder or as a slide show to QuickTime, I will get an error message saying, in effect, that there is not enough disc space to complete the export. My hard disc at those times has anywhere from 7 to 9 GB of free space. Quitting and restarting iPhoto has no effect. Neither does restarting the computer. Often times editing a photo in Photoshop Elements which then puts the edited picture back into iPhoto fixes the problem - but not always.
More often than not, the export works fine. But these "error" situations keep occurring every now and then.
Any thoughts?
Thanks in advance for your replies -
- OF

anybody?

I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have.

I cant sync my ipad because I get a message that says 'not enough free space' but the more I delete, the less space I have. Does anyone else have this issue?

http://support.apple.com/kb/TS1503
http://www.apple.com/support/ipad/syncing/

I connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i connect my ipad it shows in left side of itunes it is commencing sync then it freezes itunes and i have to disconnct it manually then a error message telling me that there is not enough disc space for ipad which is not correct any ideas folks

i have reset the ipad and restored it to no avail

"Safari could not download the file because there is not enough disc space"

"Safari could not download the file because there is not enough disc space"
I have 60gb available on my MBA and I have "read and write" privileges for the download folder. This error seemingly came out of nowhere. It doesn't matter if the file is 1gb or 10mb, I'll get the error. All I have to do is remove the .download extension and I can use the file which is complete despite the error.
This is really annoying so any help would be appreciated.

I never used to have a problem with creating a new folder and moving the download into it
But you'll have a problem if you do it now.

Error: not enough disc space?

I am trying to export my first project. Even though I have 133G left on my external hard drive I get the (not enough disc space) error. My project is 87 minutes long. Since my external drive has more than enough room, I guess the program is only recognizing my internal drive (which only has 4 gigs left). I have been opening the project and editing it through the external hard drive for quite some time now, so I am a bit confused and frustrated. My capture scratch discs are set to the external drive. I have been trying to figure something out with the media manager, but to be honest, that thing scares the **** out of me. I use FCP 5.0 on a G5 dual 1.8. Using NTSC DVCAM 48K. Is there something I'm missing about using the external drive? Any help would be appreciated!

disk formatting is handled by the Disk Utility application in the /Applications/Utilities folder.
reformatting your disc will ERASE ALL the contained data
... and you DONT want to format as FAT32, rather the opposite. the advice was to check that your disc is formatted as Mac OS Extended, and if not, to format it as such. you can check this by selecting the G-RAID's disc icon in the finder and pressing Cmd-I to open the info window.
Look down to Format, just above Capacity, in the General properties.
no doubt you will receive extra advice to ensure that the drive is not "Journaled" but this is not a big deal

Code:25 Not enough disc space Help!!!!!

Hi there,
Can someone help me before I smash my PC up!
Adobe you need to sort issues out with your products before you put your sofware on the market!
For the last four days I have been trying to create a Blue Ray disc, which has been sent from Premiere CS5.2 to Encore via dynamic link.
The project is 2hrs 36mins in length.Transcode settings are set at Transcode Default Settings. Dimenions of project are 1440x1080, Frame Rate 25.
I have 398Gb free space on my drive and 2Gb free space on disc.
Start to bulid the project in Encore, this takes another 10hrs to transcode, then it attempts to write onto disc then I get "CODE 25" Error not enough disc space?????? What the **** is this ?
I have gone through the forums on here which have mentioned deleting the session files, done all this and still no luck.
I would appreciate it if anyone has managed to solve this problem and pass their findings on to me.
Thank you
Wayne

Hi Guys,
I have finally managed to burn the project onto Blu-Ray but I have a slight issue with the Audio being slightly distorted. What would be the best settings for the audio?
This is what I did to get it onto disc:
Exported my project from Premiere CS5.2 through AME then imported into Encore 5.1. I did change the Administrator settings as advised and it looks like this did the trick.
My Encore Project Settings were set at: Codec H.264, Dimensions 1440X1080, Frame Rate 25, Upper Field First.
Export Settings from Premiere were set at:
Video
T.V Standard: Automatic (based on source) (PAL)
Frame Dimensions: 1440x1080
Frame Rate: Automatic
Field Order: Automatic
Pixel Aspect Ratio: Automatic
Profile: Main
Level: 4.1
Bitrate Settings
Bitrate Encoding: VBR, 1 Pass
Bitrate Lever: High
Target Bitrate: 18.75
Maximum Bitrate 22.5
Audio
Codec: Dolby Digital
Audio Layer: Dolby Digital Stereo
Frequency: 48 KHz
Bitrate Settings
Bitrate (kbps) 192
Do I need to up the audio bitrate for better sound as I'm getting distortion. If so what is the best setting for this?
Thank you all for your help
Wayne

My computer says"not enough free space to back up iphone to computer"

i keep recentlyl getting a notice when i connect my iphone 5 (running snow lepoard on my mac) " not enough free space on this computer to backup iphone i have 106gigs of free space, my iphone5 is 64gig help please!!!!

Close iTunes & navigate to:
~/Library/Application Support/MobileSync/Backup/
and delete everything in that Backup folder, but not the folder itself.

Cannot Install CS6 Web & Design Trial...Not enough disk space?!

I have tried downloading through installer and direct downloads and I get the same message when trying to extract the files. I have 264 gig free on my HD is this not enough?!

I have tried freeing up space, cleaned and defragged HD, one thing I am not understanding is the memory I see when I start the task manager.
Physical Memory
Total 3990
Cached 1766
Available 1754
Free 34
Im guessing this is my Ram, with only 34 Free is that Why I am getting the not enough disk space error?

HD Space vs FCE "Not enough disc space" warning

I'm trying to capture a 1 hour 27 minute video only clip. I've checked by settings and they are for my external drive that still has 346GB remaining. However, when I click "Capture" the device stops the clip after 9 minutes plus a few seconds, saying I don't have enough disc space or memory.
To get around this, I'm re-starting capture each time I get that message and creating 9 minute clips. I've captured video and audio segments up to a couple of hours without getting this warning before. I guess I'm too inexperienced at FCE to know where I should look to override this erroneous message. Even the Capture Window---which shows color bars and space to name the bin, reel, name, etc...says across the top that I have 344.9GB total free space, and total free AV time of 1545 minutes.

The HD is a Western Digital MY BOOK 500GB...
Is this a Firewire HD? If it's USB2 that will also be the cause of your problems.
Video needs firewire because of the method of data delivery in constant stream rather than in 'packets' as via USB.
I can't say why you've not had problems before - some people can capture via USB but it's not recommended and will probably lead to dropped frames and other issues.
Have you checked the formatting anyway? - all I can say is that it's well documented and recommended to capture to a drive to an external firewire and for it to be formatted Mac OS Extended (not journaled) for your computer set-up (as you can't add additional internal drives). Any other set-up will lead to problems.
Perform a search, there's a few posts in this forum referring to capture limited to about 9 minutes.

HT201210 iOS7 update saying not enough free space on computer to backup iPhone???

I keep trying to update to iOS7 and when my macbook extracts data and goes to backup it keeps saying I dont have enough free space on my computer. I have literally deleted EVERYTHING. My HD says I have 54Gig of free space available. Deleted my last iphone backup. Everything is up to date software wise. Restarted Computer and all. I have about 30Gig on iphone 5. I just dont get it. simply deleting my last iphone backup should have given me enough free space to do new backup/update. Frustrating.

It appears that your computer's hard disk is almost full. On the computer go to Apple menu and click on About This Mac and then click on Storage in the top bar of that window. Near the top it will show "xx.xx GB free of xx.xx GB" If the numbers confirm that it is nearly full then you will need to free up some space on the drive.

Install ios7 on ipad2 when it says not enough disc space

Similar Messages

Maybe you are looking for