Install IP 2013 web browser form template
Hi All,
Couldn't find a option to create Infopath 2013 form using IP 2013 form template on save as.
Could someone direct me to get the procedures to install 2013 web browser form template. I can only see 2010 options.
Thanks,
Hi the above mentioned are the templates which will come up with InfoPath 2013. If you BlankForm 2010, it will serve you the purpose which you are trying to achieve it
Sekar - Our life is short, so help others to grow
Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
you see a reply being an answer to the question of the thread, click "Mark As Answer
Similar Messages
-
How do I install the Safari web browser on my iPad?
How do I install the Safari web browser on my iPad?
Thank you for replying to my question. Unfortunately, after I had posted it, I realised that I hadn't made myself clear and posted a subsequent question, which was 'how do I install the menu bar for Safari?' Someone has replied to say that.I need to upgrade to ios8, but unfortunately I only have a first generation iPad which doesn't support this. Do you know of any other way to install the menu bar?
-
I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed
If you have an internet connection (e.g., Safari works) try here:
iOS: Troubleshooting applications purchased from the App Store -
SharePoint 2013: Infopath browser form "get form from" option greyed out
In a web part page, I was able to add an app/list web part and an InfoPath web part, where the latter is setup with a "Get Form From" data connection with the former.
Now I was trying to do the same within the edit page of the tasks list, as I was aiming to allow the user to edit the item related to the task and to approve the task from the same page. I can add the two web parts. However, the "Get Form From"
data connection is not available in this case. What do I need to do to make it so?
Thanks.Hi Ahmed,
Please go to task list page and click customize form, then publish it in the InfoPath form designer.
Now add a new page in SharePoint site, insert task list web part, then insert an InfoPath form web part. Click the triangle on the top right corner > Edit web part > Connections > Get form from, see if you could select task now.
Regards,
Rebecca Tu
TechNet Community Support -
SharePoint 2010 / 2013 web browser session timeout
1) What settings govern how long a user is authenticated in SharePoint before they need to enter their credentials again in the browser ?
2) How to check what these default session timeouts are and how to change them ?
Thanks,
MarioThanks Inderjeet and Lakshmanan for the links.
I did some more research, and here are my findings regarding SharePoint authentication cookies: (We are using claims with Windows NTLM authentication in SharePoint 2010)
Per the white paper at
http://download.microsoft.com/download/9/F/6/9F69FEBA-614B-483F-9CF2-60225D75E81E/persistent-cookies-whitepaper.docx : "SharePoint sites create persistent cookies with a default time-out value of 10 hours for sites that use Windows claims or forms-based
authentication claims"
I verified this by running the following PowerShell command:
Get-SPSecurityTokenServiceConfig | select WindowsTokenLifetime
which returned 10:00:00 (i.e. 10 hours) and matches the default cookie timeout in the white paper.
However, in my testing, I found that once I logged in, I was able to access the site without re-entering my credentials even after 10 hours, so I'm not sure what exactly controls the session timeout.
Also, the white paper mentions that by default SharePoint uses persistent authentication cookies that are saved to disk. However, even after deleting all cookies from my browser, I am still able to access the site without entering credentials. (I only need
to re-enter credentials once I close the browser and reopen the SharePoint site in the browser again) . The only cookies I see are related to '/_vti_bin/Discovery.asmx' and I don't think that these are the authentication cookies.
To summarize - my test results were not consistent with the default timeout of 10 hours, and I was unable to find the SharePoint authentication cookie. Interested to hear if anyone has any thoughts on this.
Thanks,
Mario -
Could not verify the form template on the target server + infopath 2010
I am getting the could not verify the form template on the target server + infopath 2010
warning in the infopath form.
The design checker task pane I see a warning saying "Could not verify the form template on the specified server". I cannot find
anywhere in msdn or google addressing this warning. Inspite of this warning i tried to quick publish the form, and then i get an error saying: "The form template has been published to the server but it can only be opened in the InfoPath Editor because it contains
feature that are not compatible with web browsers, to fix this problem, click close and review the errors in the Design Checker task pane"
Md. TariqHi Tariq,
Please make sure:
SharePoint Server Enterprise Site Collection features site collection feature has been activated.
Go to Form Options > Compatibility > Select the Form type as Web Browser Form.
Try to publish the form to the root site of the site collection as a content type.
If the problem still persists, please check whether there is any binding issue or logical issue. If the problem still cannot be solved, could you please try to create a new form and see how it works?
Here is a similar thread for your refer.
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010customization/thread/2c66bff6-8d83-40da-9fe8-5f064329bde0
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support -
Atomic Web Browser -- How to set as preferred browser instead of Safari?
I recently installed the Atomic Web Browser on my iPad. However, whenever I tap on a link outside this app (in an email, for example), the Safari browser is activated. Is there a way to make the Atomic Browser the preferred browser so this won't happen?
Thanks in advance!Not at the moment no, there is no way to change it from Safari. You can try leaving feedback and maybe it'll happen in a future release : http://www.apple.com/feedback/ipad.html
-
Visual Studio 2013. Viewing a PDF file via the Web Browser control in Windows 8.1
I am writing a Windows Forms application in which I need to view PDF files via the Web Browser control. When the control is given the Navigate() command, Windows takes over and asks which program I want to open the file with. All was fine with VS 2010 and
XP. I have un-installed "PDF Complete", which was the default PDF viewer, but I now get asked for an alternative.
Thanks in advance.
Mike SaundersHi Mike,
It seems that we could use Internet Explorer to open a local .PDF file if it has the Adobe Reader. I doubt that the web control would be related to it. Like the MVP's suggset in the following thread, maybe it would be related
to certain plug-in tools in your side like the adober reader.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/a717117e-41ae-4775-9c28-d5a1042b396e/pdf-is-not-opening-in-web-browser-control-in-vbnet?forum=vbgeneral
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I am trying to add a new workflow to a document library with the below mentioned settings and getting error saying "This form cannot be opened in a web browser. to open this form use microsoft infopath" while adding a new Approval - Sharepoint
2010 and Publishing Approval workflow" . For your information the I have checked the server default option to open in browser.
Versioning Settings.
Error
This is quiet urgent issue . Any help would be really helpful.. Thanks..Hi Marlene,
Thank you very much for your suggestions.
But I am not creating a custom workflow in designer as Laura has mentioned. I am instead trying to create a new Out of the box Approval Workflow and I get the error mentioned above.
As it works in other environment, I tried figuring out the possible differences which can lead to this error.
Today I found one difference which is there are no form Templates within Infopath Configurations in Central Admin. Now I am trying to figure out what makes this form templates to be added to the template gallery.
Regards,
Vineeth -
Problem discribe:
1.environment:
(1)Network: only local network.
(2)Platforms
All platforms we use are Solaris 10 for X86.
(2.1)Server: (intel) Solaris 10 for X86
Oracle Application Server Forms Services 10.1.2.0.2
(2.2)Client: Mozolla web browser on (intel) Solaris 10 for X86 .
Mozolla web browser information:
(2.2.1)[menu]-[Help]-[About web browser]display:
Welcome to Mozilla 1.7 for Sun Java(TM) Desktop System
Mozilla/5.0 (X11; U; SunOS i86pc; zh-CN; rv:1.7) Gecko/20070606
(2.2.2)[menu]-[Help]-[About Plug-in]display:
Java(TM) Plug-in 1.5.0_12-b04
file name: libjavaplugin_oji.so
Java(TM) Plug-in 1.5.0_12
MIME type
application/x-java-vm Java
application/x-java-applet Java
application/x-java-applet;version=1.1 Java
application/x-java-applet;version=1.1.1 Java
application/x-java-applet;version=1.1.2 Java
application/x-java-applet;version=1.1.3 Java
application/x-java-applet;version=1.2 Java
application/x-java-applet;version=1.2.1 Java
application/x-java-applet;version=1.2.2 Java
application/x-java-applet;version=1.3 Java
application/x-java-applet;version=1.3.1 Java
application/x-java-applet;version=1.4 Java
application/x-java-applet;version=1.4.1 Java
application/x-java-applet;version=1.4.2 Java
application/x-java-applet;version=1.5 Java
application/x-java-applet;jpi-version=1.5.0_12 Java
application/x-java-bean Java
application/x-java-bean;version=1.1 Java
application/x-java-bean;version=1.1.1 Java
application/x-java-bean;version=1.1.2 Java
application/x-java-bean;version=1.1.3 Java
application/x-java-bean;version=1.2 Java
application/x-java-bean;version=1.2.1 Java
application/x-java-bean;version=1.2.2 Java
application/x-java-bean;version=1.3 Java
application/x-java-bean;version=1.3.1 Java
application/x-java-bean;version=1.4 Java
application/x-java-bean;version=1.4.1 Java
application/x-java-bean;version=1.4.2 Java
application/x-java-bean;version=1.5 Java
application/x-java-bean;jpi-version=1.5.0_12 Java
2.Install Config:
(2.1)formsweb.cfg
after install,
/export/home/ias/OraHome_2/forms/server/formsweb.cfg
include a section :
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
(2.2)run oracle test form and my forms
http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
(Oracle simple test demo form)
or
tttp://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
(2.3)browser dialogue window display:
[title:Default Plugin]
This page contains information of a type (application/x-java-applet;jpi-version=1.4.2_06)that can only be viewed with the appropriate Plug-in.
Click OK to download Plugin.
when I Click Ok ,display warning :
File not found:www.sun.com, check filename ,try later.
(2.4)change formsweb.cfg
/export/home/ias/OraHome_2/forms/server/formsweb.cfg
change:
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
to:
jpi_mimetype=application/x-java-applet;
(2.5)run again oracle test form and my forms
http://s216:7777/forms/frmservlet?form=test&userid=scott/tiger@orcl
(Oracle simple test demo form)
or
http://s216:7777/forms/frmservlet?form=myform&userid=scott/tiger@orcl
(2.6)Problem:
myform and test(Oracle simple test demo form) can run and display,
but all buttons(when click) not work(no response);
all meuns not work...........
How to Solve this problem?
thanks in advance.The currently supported versions with patches installed are as follows:
<li>10.1.2.3 (10.1.2.0.2 + patch 5983622)
<li>11.1.1.4 (11.1.1.2 or 11.1.1.3 + patch 11060983 : this also requires WLS 10.3.4)
Fusion Middleware (FMw) 11 downloads are available from here:
http://www.oracle.com/technetwork/middleware/weblogic/downloads/index.html
Patches are only available to customers with access to MyOracleSupport (http://support.oracle.com)
For Forms/Reports users, look for the FMw download titled "Portal, Forms, Reports and Discoverer". The distribution includes all that is necessary to design and deploy your applications. Note that WebLogic Server is also required and is a separate download (from the same page). Be sure to carefully review the installation instructions before attempting the process. It may also be helpful to review MyOracleSupport note 1073776.1. -
This form template is currently browser-enabled but it cannot be browser enabled on the site
Hi,
we have an issue with infopath form when trying to publish the form with browser enabled feature it is showing error "this form template is currently browser-enabled but it cannot be browser enabled on the site" and also "Enable thisf orm
to be filled out by using browser" option is disabled
i have triedfollowing
1. Site Collection Features has "Enterprise Features enabled"
2. Site Features also has "Enterprise Features" enabled
3. Forms Library has "View as Web Page" enabled in advance settings
4. Infopath Forms Service has Render and User Browser Compatible Forms enabled
5. Tried creating a form with simple section and design checker does not flash any errors (And, yes, the form is made browser compatible)
6. Tried enable and disable of Infopath Forms Service, Enterprise Features, etc and did an IISRESET each time
7. Default Form Templates library is also there in view all site contents page, this is also
8. This is only happening in one site collection, on other site collections this is working
Anyone please help me on thisThanks Darrell,
Apologies for my delayed response. I wish it was that simple! When I publish, the files are saved throughout the site with files from my 7 other animations (some of which I've decided not to use). Very confusing for an Edge noob. Anyway I've identified and collected them all using Finder into a folder to zip. Now I have to finish sorting about 1.25 GB of images (when I started experimenting with Edge I made the mistake of using big pixel dimensions and many duplicates of varying sizes) that aren't in the animation I want to send you. I don't know which ones to delete without inserting each one in the edge animate composition first as distinguishing the names in the library seems to be a lost cause. Thanks for your patience and I'll send the zipped file with the pruned images within 48 hrs. I'm working with a full laptop that's at the end of its natural life so its taking a lot longer. I hope the whole problem is because of my huge image folder and not to do with javascript etc. The animations work fine by themselves in any browser and after publishing by themselves it seems. Just not in DW...
Cheers, Gene. -
Whats the best, fastest web browser in 2013 ?
whats the best, fastest web browser in late 2013 using mavericks on haswell MBP ?
posting questions and answers on this board are optimized a little better with Safari, and its easier to work with, however I still prefer Firefox for this board.
Also some websites dont process Amazon.com or other ordering things right with Firefox, a couple Airlines I use are the same, must use Safari for them, or Chrome (which I dont use)
So I use Safari for those.
see all the neat addons for Firefox at:
https://addons.mozilla.org/en-US/firefox/
there are quite a few for Safari too, but not nearly as many.
I dont like Safaris search word feature, its too awkward, Firefox is very easy and fast.
what one has, the other is better at and vice versa....which is why most prosumers use MORE than one web browser.
Consider the installing of the free ADDON called "Ghostery" for Firefox or Safari, it removes all Youtube commercials. (ie adware)
isnt that nice?
many such examples like this, one is good with this,.....other is better at that.... etc. -
Hi,
When I try to open a Infopath related file from Sharepoint, I am receiving the below error.
This form template is not currently browser-enabled. It must either be republished as a browser-enabled form, or opened using Microsoft Office InfoPath 2007.
Office Professional Plus 2010 and Infopath 2010 are installed in my Windows 7 Enterprise edition. Have executed ""C:\Program Files\Microsoft Office\Office14\InfoPath.exe" /cache ClearAll" the command. But still getting the same error.
It works in different machine. Repaired Office 2010 and Infopath.
Please let me know if any solution available.
Regards,
Boopathi SHi,
You can try Amit Bajaj's method in another thread which has fixed the same problem for several users:
Check if the default “Form Templates” option in appearing under “View all site contents” page. If it is not enabled by
default, then you can follow this following steps.
If "Office SharePoint Server Enterprise Site Features" is enabled but we don't see the default "Form Templates" on the "View
all site contents" page, then you should use the following steps.
Make sure they have backup of everything.
Opened the site http://<your site url> in SharePoint Designer.
Select the root URL and click FILE >> NEW >> SharePoint Content
Choose Document Library >> Form Library
Under options type the name as “FormServerTemplates” and it will create the content.
Now right click on “FormServerTemplate” and open “Properties”
On settings Tab change the name to “Form Templates” and uncheck the option “Use a template for new documents”
Click OK
Now you should see “Form Templates” on the view all site content page.
You should be able to publish the InfoPath form with "Enable this form to be filled out by using a browser."
Reference:
https://social.msdn.microsoft.com/Forums/en-US/c9617953-a54c-44ec-86cf-df215c750c18/this-form-template-is-browsercompatible-but-it-cannot-be-browserenabled-on-the-selected-site?forum=sharepointcustomizationlegacy
Since this issue is more related to SharePoint, if above steps doesn't resolve the problem, I'd recommend you post your question in the following forum for further assistance:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=sharepointcustomizationlegacy
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]. -
Display Report Parameter Form on Web Browser
I have prepared a report (with a user parameter form )using Report Developer. Then I call the report in a web-based application through the web-browser. the parameter form display normally, except that there are two buttons on the top : submit and return. Also, the layout of the parameter form is not consistent with the style of my application.
1. Can I customized the layout of the parameter form so that it can have consistent style with my web-based program ? If yes, how?
2. Can I suppress the buttons shown on the parameter form ?
(Our Report Server is 9iAS )Hi
Reports built-in parameter form is deliberately fairly simple in capabilities (otherwise, you'd have all the functionality of Forms inside of Reports). However, with JSPs in Reports 9i, you can go farther to create a custom parameter form of your own liking.
Thanks
The Oracle Reports Team -
The changes made in the WAD web template is not replicating on web browser
Hi,
We are using BI 7.0 WAD. Suppose if i create a one web template and if i run it ...it is working fine.
If i change the present web template and if i do change anything on the present web template and if run this web template it is giving the previous result....it is not reflecting the present changes.
The changes made in the WAD web template is not replicating on web browser result.
I went to transaction SMICM, then choose "Goto" from the top menu. From there, go to HTTP Server Cache, then choose Invalidate, then choose Global in system. With this thing also it didnt slove.
thanksClear your browser cache also and see if the changes are visible.....
Arun
Maybe you are looking for
-
How to do advance payment against PO for this is there any T.code
Hello, Lt's say for ex: Once Po is created how to pay the advance payment against PO to the vendor, for that is there any transaction code. Once advance payment is made against PO, again system should not allow for ammendement So like this to control
-
My steam won't launch ever since I updated to Yosemite I don't know what is going on.
Whenever I try to launch it, it says "Steam quit unexpectedly" I have tried redownloading it 5 times and have every software up to date. I also have tried deleting all my steam files and it still doesn't work. Here is a screenshot: I also downloaded
-
Prices in PO items in classic scenario
Hi, When I create a SC in SRM and select a material the price is selected automatically from Master data maintained in SRM for the material.However, when the PO is created in MM as aresu;lt of the SC in SRM, the price gets changed to anothe value.i c
-
Hello all, Suppose if you have two operating units, you have imported two operating units payables transactions to GL, now you want to know only one operation unit transactions, remember two operating units payables information is in GL, how can you
-
Display black leaving clamshell mode in sleep
Any way to wake-up / reactivate laptop built-in display without rebooting? My machine is in clamshell mode about 90% of the time-- closed, connected to a display and keyboard. Always works fine when booting in regular, laptop configuration. However,