Install java2 sdk1.4.0 (beta2) on solaris 7

I installed the j2sdk1.4.0 on solaris. After setting the path and classpath, when I do "javac", I got the following error message:
Error: failed /afs/ncsa.uiuc.edu/projects/hdf/java/java8/kyan/jdk1.4/jre/lib/sparc/client/libjvm.so, because ld.so.1: javac: fatal: relocation error: file /afs/ncsa.uiuc.edu/projects/hdf/java/java8/kyan/jdk1.4/jre/lib/sparc/client/libjvm.so: symbol __1cG__CrunSregister_exit_code6FpG_v_v_: referenced symbol not found
Does anyone know why I got the error message? How could I solve this problem? This is my first install jdk on solaris and cannot find solutions from install instruction.
Any help are really appreciated.
K

K -
I had the same exact problem (with that cryptic __1cG__CrunSregister_exit_code6FpG_v_v_ message) on the same version of Solaris (7). I finally solved the problem (after hours of troubleshooting, and reading this message board ). You need to go to the following Sun web site and download the patches for Solaris 7 (about 52.3mb), but it fixes the problem.
http://sunsolve.Sun.COM/pub-cgi/show.pl?target=patches/patch-access
Let me know how it goes.
-Ken Orr

Similar Messages

Installing oracle 10g release 2 on spark solaris!! urgent help!

hi guys!
Am installing oracle 10g r2 on spark sun solaris. I did install the software without any pb, but when installing the database using dbca, I have this errors.
ORA-27154: post/wait create failed
ORA-27300: OS system dependent operation:semget failed with status: 28
ORA-27301: OS failure message: No space left on device
ORA-27302: failure occurred at: sskgpcreates
Edited my kernel parameters and in the /etc/system file, ai've added
set noexec_user_stack=1
set semsys:seminfo_semmni=100
set semsys:seminfo_semmns=1024
set semsys:seminfo_semmsl=256
set semsys:seminfo_semvmx=32767
set shmsys:shminfo_shmmax=4294967295
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=100
set shmsys:shminfo_shmseg=10
Space aint an issue and dont know how to over come this error!
Should ai just install the db using scripts and run the neccessary .sql scripts instead of going through dbca?
junior DBA in distress.

This appears to be because of low semaphores setting. Did you reboot your server after making the /etc/system parameter changes ?
-Ramesh

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

Problem to install Directory Server 5.1 SP2 on Solaris

Hi
I need to install Directory Server 5.1 SP2 on Solaris 8. When I was asked to provide system user and system group, I provide "root" and "system". As a result, the installation fail message was shown and abort the installation.
However, I was install the Directory Server 5.1 SP1 on solaris 8 successfully by using "root" and "system". Does anybody know why?
Thanks and Regards,
William Siu

But i've more than 2 Go of free disk space !!!!
"Tim Muratet" <[email protected]> wrote:
>
Sure...Get more disk space.
"coolys" <[email protected]> wrote in message
news:3a252a26$[email protected]..
hi,when i decompress the weblogic510.exe file under NT, in the end of theself extracting i have the message below :"The decompression of %s failed.
there may not be enough free disk space available in the TEMP"Can anybody
help to resolve this problems.thanks for yours reponses.

Installing EPM 11.1.1.3 on Solaris x64

Hello Gurus,
I am not able to install EPM 11.1.1.3 on Solaris x64. I am facing an issue while I execute installTool.sh. It gives me an error
Cannot execute <filename>
Could anyone please help. What are the steps that I need to keep in mind before doing that.
Thanks and Regards,
Saurabh

CLOSING THE QUESTION AS NO ANSWER TO IT SINCE LONG TIME

Install OBIEE 11.1.1.5 in Solaris Machine

Hi all,
Can we install OBIEE 11.1.1.5 in solaris machine. Is there any link for the steps for installation? Can anybody help on this?
Thanks in advance.

Hi,
Yes that was the certification matrix.You can verify the supported jdk,oracle dabase vaersion in "Current System Certification" sheet (Rows 43 - 45)
Installation guide is available here,
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10539/toc.htm
Rgds,
Dpka

How to Install and config Discover9.0.2 on Solaris?

I am finding the doc about HOW to install and config Discover9.0.2 on Solaris where Application 11i has been installed!
It's quite uegent.Hope you can help me.If possible,pls directly mail the docs to me:[email protected]
Thanks!

Hi,
Installaing Discover is quite easy but you need to configure to the database and apps also for which you need to create a repostory. So keep you database login and a seperate tablespace ready and start discover from oracle_discover_home/bin you will find options there for configuring repostory there.
kamalesh jk

Is the .sh install facility going to be added to Solaris 11 since the IPS i

Is the .sh install facility going to be added to Solaris 11 since the IPS is not ready?

I don't know what ".sh install facility" means.
I don't what you mean when you say "IPS is not ready".
Can you explain in more detail?
As far as I know IPS will definitely be the packaging system for Solaris 11.
------------- Edit ----------------
Ooops, I thought you were talking about Solaris 11, but you are probably talking
about the Studio installer. Adding a .sh-based installer on Solaris 11 is technically
possible. I'm not really in a position to say for sure if it will be done or not.
We are actively working on making SS12.2 available in IPS, but it's not there yet.
--chris
Edited by: Chris Quenelle on May 23, 2011 9:51 AM

Setup-Problem while installing AM Policy Agent 2.1 on Solaris 10

I'm new with AccessManager and try to get it working on Solaris 10 on a Sparc.
I'm using LDAP-Server, WEB-Server 6.1 and AccessManager from the software-paket: "Sun Java System Access Manager 6 2005Q1" .
While trying to install policy-agents on the Sparc (by starting setup program), I've got the message: "The installer ist intended for Solaris Operating System only".
The agent-software I'm trying to install is "Access Manager Policy Agent 2.1 for Sun Java System Web Server 6.1" From there I choosed "Solaris SPARC 8".
(so I've got the paket "S1WebServer_6[1].1_agent_2.1_sparc-sun-solaris2.8.tar.gz").
In my opinion, it must be correct. Ist there anything i'done wronge?
thanks, Paul

Even when there is no agent available for Solaris 10 now:
If you don't have any doubt to use an unsupported configuration, at
least the apache agent is installable.
You have to extract the packages "SUNWamapc" and "SUNWcom"
from the tar-archive and install it using pkgadd.
Then, you have to configure it manually ("include" in "httpd.conf",
"AMAgent.properties").
Maybe, it is possible to do something similiar with the agent for
SUN webserver.
Be aware that noone will guarantee that such unsupported
installations won't raise any problems.
Juergen

Patches prob. installing Oracle 8.1.6 ent on Solaris 2.6 Spark ver

i am installing oralce 8.1.6 enterprise edition database on sunspark solaris 2.6,
oracle 8.1.6 requires patches to initiate jre1.1.8_10 to install on solaris 2.6 as specifiled in the installaion manual in the cdrom. i could updated 1 patch , but when i was trying to update kernal with another patch, the kernal has not updated saying file courrpt from the source file. Then suddenly, the movement i restarted The server, it has got crasshed. i just wondered how the kernal went off.
I configured oracle 8i on
NT,2000,Novel,Sco-unix,Unixware,solaris(intl),solraris(spark),linux.
I didnt get this kind of prob., it was an abarasing setuation in front of the customer as he has sybase database in the same server. i downloaded these files from the net (....tar.Z) & unzipped using winzip then copied those folders in to solaris using cuteftp in (ascii mode..)
Solaris 2.6 Patches for JRE 1.1.8_10
106040-11 X Input and Output Method patch Required
105181-15 Kernel patch Required
105284-25 Motif Runtime Library Patch Recommended
105490-07 Dynamic linker patch Recommended
106409-01 Chinese TrueType fonts patch (1) Recommended
105633-21 OpenWindows 3.6: Xsun patch (1) Recommended
105568-13 Libthread patch Recommended
105210-19 LibC patch Recommended
105669-07 CDE 1.2: libDTSvc patch (dtmail) Recommended
please let me know is there any sequence involved in installing patches
null

Our 8.1.6 database is currently running on Sun Sparc - Solaris 2.7. We want ?to upgrade to Solaris 2.8. Will 8.1.6 database run on Solaris 2.8?
Thanks Yes, oracle 8i will run under solaris 8 (2.8).
William Coldiron

Install of Oracle 8.1.7. on Solaris 8 fails

Hi All!
I am doing an install of Oracle 8.1.7. Right near the end of the install when oracle is trying to link it's libraries, I get a message that /oracle/product/8.1.7./rdbms/lib/ins_rdbms.mk failed. I continue with the install and try to run make on this file by hand. I get:
make: Fatal error: Don't know how to make '/oracle/product/8.1.7./rdbms/lib/libskgxpd.a(/oracle/product/8.1.7./rdbms/lib/skgxpd.o)'
I did a search on Google and the only references to skgxpd.o where for the SuSE Linux Oracle, although the error is identical. Unfortunately, no solution has been offered.
One person I talked to said to make sure LD_LIBRARY_PATH included /oracle/product/8.1.7./rdbms/lib/. However, that didn't help.
I would be grateful for any help.
Regards,
Jim Mohr

One person I talked to said to make sure LD_LIBRARY_PATH included /oracle/product/8.1.7./rdbms/lib/. However, that didn't help. James,
Because the path of /oracle/product/8.1.7./rdbms/lib/ depends on the location of ORACLE_HOME you set, it doesn't sound like a pre-installation setting. It's not mentioned in the manual anyway.
You may want to check to see if the following commands are on the installation user (oracle)'s PATH.
$ /usr/bin/which make
$ /usr/bin/which ar
$ /usr/bin/which ld
$ /usr/bin/which nm
Also it's mentioned in the manual:
===============================================================
Note: If you require /usr/ucb in your search path, make sure it
comes after /usr/ccs/bin in the PATH setting.
===============================================================
I set up a 8.1.7 on Solaris 8 but didn't have such a problem.
Best luck,
Han Zhang

Is it Possible to install oracle 9i 32 bit on Sun Solaris Intel Edition

Dear OTN Members ,
It is possible to install ORACLE 9I Sun SPARC Solaris (32 Bit) on
Sun Solaris Intel Editon 2.8 . Please inform me on
email :-
[email protected]
[email protected]
Thanking You
Piyush Patel
- Server name :- pi.com
- Filename
- Date/Time
- Browser + Version : Netscape 4.7
- O/S + Version : Sun Solaris Intel Edition 2.8

857211 wrote:
I just need some advice on installing oracle 11gWhat part/product of "oracle 11g" exactly?
Installation Guides should be clear enough, if read. Also read Release Notes for additional support/unsupport info.
http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#CHDHGGFE
http://docs.oracle.com/cd/E11882_01/install.112/e24187/pre_install.htm
However the Installation Guide for Database Client adds:
"Note: Oracle provides 32-bit (Windows x86) and 64-bit (Windows x64) versions of Oracle Database Client. _Oracle certifies 32-bit Oracle Database Client on Windows x64_." (underline added)

Installing BIBeans on 9iAS 9.0.3 Solaris 8

I was reading in http://otn.oracle.com/products/bib/htdocs/installation/installing_bibeans.html regarding install of BIBeans on UNIX environments that require an X server or XVFB on a "headless" box. Is this the case on Sun V240's? That's what I'm assuming.
The readme continues to detail that there is no problems with generating images on "headless" boxes when using JDK 1.4.x since it supports headless environments with the following option to the JVM: ' -Djava.awt.headless=true '
What doesn't make sense to me is whether all of this is necessary in a web application (JSP/Servlet returning a BIBean Presentation) running on 9.0.3 of OC4J in 9iAS on Solaris 8 (V240).
9.0.3 is running J2EE 1.3.x which uses the 1.3.x JDK. This begs the question of whether 9iAS (OC4J 9.0.3) needs to use JDK 1.4.x (or XVFB) to enable graphic generation of Presentations in a web app on UNIX (Solaris 8)?
Thanks,
Laith E.H.

The Web applications hosted on iAS/OC4J using Beans Presentations do require XServer (or XVFB) on Solaris (all versions of the operating system) box as long as the underlying Java runtime (The Java runtime used to start OC4J) is 1.3.X based.
The XServer is not required (-Djava.awt.headless=true is required however) when using J2SE 1.4.
Thanks

Error when installing 10.2.0.3 agent on solaris 8

I've installed the agent successfully on other solaris 8 servers but on this one machine, i get the "Heap at VM Abort" error.
I've seen this in the past when doing oracle installations and the trick was to use a different size for jre_memory_options.
However, i've modified the oraparam.ini file but it hasn't failed.
I've seen many hits on google but don't see a fix that works.
Any ideas?
Thanks.

here are more details on the error:
Heap at VM Abort:
Heap
def new generation total 2112K, used 1270K [0xea800000, 0xeaa20000, 0xeb8e0000)
eden space 2048K, 58% used [0xea800000, 0xea92db00, 0xeaa00000)
from space 64K, 100% used [0xeaa00000, 0xeaa10000, 0xeaa10000)
to space 64K, 0% used [0xeaa10000, 0xeaa10000, 0xeaa20000)
tenured generation total 1408K, used 1179K [0xeb8e0000, 0xeba40000, 0xf4000000)
the space 1408K, 83% used [0xeb8e0000, 0xeba06cc8, 0xeba06e00, 0xeba40000)
compacting perm gen total 5632K, used 5389K [0xf4000000, 0xf4580000, 0xf8000000)
the space 5632K, 95% used [0xf4000000, 0xf4543738, 0xf4543800, 0xf4580000)
Local Time = Wed Jan 30 10:58:42 2008
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid28700.log.
# Please refer to the file for further information.
I can't seem to find that log file above anywhere. Where would that be?

Problems in installing msi k9n6gm-v drivers in sun solaris

I have problems in installing drivers of my msi motherboard. Please help me. Also im new in using sun solaris. I dont know how to run executable and .ini files format which is windows compatible.

You are new to the forum, so some advice:
Do not post the same question to multiple forums.
Pick one and place it there.
You will get a response or you will not get a response.
Cross-posting will not get any answer, any faster, and it is considered bad forum manners.
ini and exe files are for Microsoft's OS.
They don't work in *NIX.
Your motherboard drivers are for Windows and cannot be used for Solaris.
Here are a few links for you to spend some time with:
http://www.sun.com/bigadmin/hcl/hcts/device_detect.html
http://www.sun.com/bigadmin/hcl/
http://72.5.124.61/software/solaris/howtoguides/installationhowto.jsp
http://docs.sun.com/app/docs/doc/817-0544/

Install java2 sdk1.4.0 (beta2) on solaris 7

Similar Messages

Maybe you are looking for