Install Kernel Patch and Support Package
Hi Gurus.
How can I update the kernel patch and support package in solution manager?
What patchs i have to download In the service.sap.com ?
best Regards
luis
Hi Luis,
Yopu must already have checked this info at Inst Guides..
else...The Post installation steps in the installation guide contain the procedure for application of latest support packs procedure.
https://websmp204.sap-ag.de/instguides
The following SAP notes can also be referred : 212876
Information of how to download a kernel can be obtained from 19466.
Details of Patches and their release schedules can be obtained as always at
https://websmp104.sap-ag.de/ocs-schedules
Hopefully it Helps in your quest.
Br,
Sri
Similar Messages
-
Hi all,
Is ther any difference between the OSS and support packages?
Plz explain for this one.
regatrds
vijayHi,
IMPORTANT DIFFERENCE
Support packages provide a bundle of fixes in electronic form that are imported into the SAP system. These Support packages must be imported in order (starting with the very first one) and they cannot be skipped. All fixes within a Support package must be imported together, there is no ability to pick and choose the fixes.
The second form of fixes that SAP provides is via OSS notes that pertain to specific problems. These notes must be manually applied to the system, as these fixes are generally not available in electronic form at the time the note is published. Care must be taken to ensure that the note is entered correctly otherwise new problems may occur, or the existing problem is not corrected.
A Support package may contain fixes that also exist as individual notes, but many times they contain fixes that are only provided in Support packages. SAPs strategy for providing intra-release fixes is through Support packages and the use of individual notes is decreasing.
I hope this information could help you.
Note: Points always encourage me to reply !! -
XI3.1: How to install Fix Packs and Service Packages
Hi there,
I'm a Business Objects newbie
I'm searching a guide which explains me, how to install Fix Packs and Service Packages for XI 3.1. And I've one more question: Where can I see the current Service Package in the System?
Best regards,
AndreasHi,
You can refer the Install guide from the below URL for the installation of FP's or SP's for BOE.
http://help.sap.com/ ---> go to the Business Objects section and select the FP or SP install guide which you want to install.
-Noor. -
Latest kernel realese and support packs
Hi,
Please let me know what is the latest Kernel Realese and Support Pack levels?
Thanks
Asim.Hi Asim,
Please do check the below link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/70d8838d-cb8f-2c10-7ab8-d1504670fbb8
How to do a kenel upgrade, check present version, how to download-> all have been updated.
Lemme know if I need to add anything else as well.
Kind regards,
Hemanth -
Language install and Support Packages
We have installed some new languages in our system and are now re-applying the support packages as required.
In SMLT when re-importing the support packages, a pop-up box with the option to 'Overwrite' or 'Do Not Overwrite' repaired texts comes up. We are debating the pros and cons of these options. There is no list telling us specifically which texts have been repaired so that we can evaluate (ie, a SPAU list).
Does anyone have feedback on which is the preferable option?HI,
I am facing the same problem and I tried restarting the import.
But the same error occurs again.
Please find the error below:
Error when importing language data
tp message:
A tool used by tp broke down
The tp program was called as follows:
POSTLANGUAGEIMPORT
SAPK-603DFINSAPAPPL
Q18
U6
pf=/usr/sap/trans.Q18/bin/TP_DOMAIN_M36.PFL
-Dpostlanguageimportvector='V'
-Dctc=0
-Dclientcascade=yes
-Dtransdir=/usr/sap/trans.Q18
tp output:
This is tp version 380.07.32 (release 721, unicode enabled)
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter SERIAL is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter SERIAL is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBSWPATH is no longer used.
ERROR: stopping on error 16 during POSTLANGUAGE IMPORT
stopping on error 16 during POSTLANGUAGE IMPORT
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
This is /usr/sap/Q18/SYS/exe/run/R3trans version 6.24 (release 721 - 23.05.13 - 20:13:04 ).
unicode enabled version
1AETW042 unexpected EOF after "242810271" bytes.
2EETW000 Please contact the SAP support.
exiting ...
/usr/sap/Q18/SYS/exe/run/R3trans finished (0016).
Any help would be much appreciated.
Regards,
Gowtham -
Spam/saint update and support package
Hi,
our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
*in solution manager support package is
SAPKB70008
SAPKA70008
SAPKIPYJ78
SAPKITLQI2
SAPKW70008
SAPKNA7005
SAPKU50005
SAPK-40005INCPRXRPM
SAPKITL416
SAPK-15074INSTPL
SAPKITLOG3*
*in dev/produ system support package is
SAPKB70011
SAPKA70011
SAPKIPYJ7B
SAPKITLQI3
SAPKW70012
SAPKNA7008
SAPKE60015
SAPKH60008
SAPKGPID08
SAPKGPGD08
SAPKGPRD08
SAPK-60008INFINBASIS
SAPKGPPD08
SAPKGPFD08
SAPKGPHD15
SAPKGPDD08*
please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
Regards,
AsifHi Asif,
How to get particular support package from service market place .
EX:SAPKB70011
If you want to download the patch SAPKB70011:
Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
You can add the required patch to your download manager.
Thanks & Regards,
Nagendra. -
Need to upgrade Java Kernal patch and support patch for Solman server 7.0
Dear all ,
Tech details , Win32 bit and Oracle .
I want to upgrade latest java kernal patch for Solma 7.0 .
I have checked the Service.sap.com (https://websmp105.sap-ag.de/support/downloads/Support Packages and patches - Entry by Application Group/Solution manager JAVA Stack)
Solution Manager JAVA Stack :
ADOBE DOCUMENT SERVICES 7.00
BI UDI 7.00
J2EE ENGINE BASE TABLES 7.00
JAVA LOG VIEWER 7.00
JAVA SP MANAGER 7.00
LIFECYCLE MGMT TOOLS 7.00
SAP CAF 7.00
SAP CAF-UM 7.00
SAP IGS 7.00
SAP J2EE ENGINE 7.00
SAP J2EE ENGINE CORE 7.00
SAP JAVA TECH SERVICES 7.00
SAP KERNEL 7.00 32-BIT UNICODE
SAP VIRUS SCAN INTERFACE 7.11
SAP VIRUS SCAN INTERFACE 7.20 .. ete ...
what are patches required to Upgarde java patch and let me know the procedure also . it will be helpful for me .
Regards
Kindly suggestDear all ,
I have checked help.sap.com , its mentioned in Software delivery Unit .
1,software component archive (SCA),
2,Java archive (JAR) or SAP archive (SAR).
Support package stacks:
A set of different SCAs
○ A set of different SCAs that are modified using the NWDI
○ The SDM JAR u2013 SDMkit.jar
○ The kernel SARs:
■ Database Independent: SAPEXE.SAR and other operating system dependent SARs
■ Database Dependent: SAPEXEDB.SAR and other database dependent SARs
■ The SAP archiving tool u2013 SAPCAR
○ The IGS SAR u2013 IGSEXE.SAR
○ A configuration XML file, which includes a description of the components that are part of the stack and their respective support package and patch levels.
I understand the Kernal SARs and I have downlaoed SAPEXE.SAR ,SAPEXEDB.SAR ,IGSEXE.SAR .
let me know the list of SCA files , i have to download from service.sap.com . (set of different SCAs that are modified using the NWDI and The SDM JAR u2013 SDMkit.jar)
Kindly advise .
Regards -
Question about OSS Notes, Archiving and Support Packages
Hello,
does anyone know if all the OOS notes related to archiving programs corrections (category like "performances", "program error", "advance developments",
"legal functions", "corrections of legal functions", "problem", "exit added", "special developments"...) are all automatically appllied on SAP when a support packages is installed?
Thank you
Best regards
FabioLooks like the only requirement is Vcenter and Vsphere 4 client. So version 4.0 and up is supported.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/application_networking_manager/5.1/device_support/table/sdt.html
ANM 5.2 and 5.1 includes a plug-in that allows you to integrate ANM into a VMware virtual data center environment. VMware is a third-party product for creating and managing virtual data centers. Using VMware vSphere Client, you can access ANM functionality and manage the ACE real servers that provide load-balancing services for the virtual machines in your virtual data center.
To use the ANM 5.2/5.1 plug-in, you must use VMware vCenter Server and VMware vSphere Client 4.
For more information about using ANM in a VMware virtual data center environment, see the User Guide for the Cisco Application Networking Manager 5.2/5.1. -
Difference Between Patches And Support Packs
Hi Experts,
I have one doubt,
1.... I want to Know Difference Between the Patches And the Support Packs
2...What is the Use of these Two??????????Is it Necessary to Apply these Two??
I asked This Question in Number of Queries...................
Please Let me Know All the Above Mentioned Queries
Regards
KhannaThank you for ur Quick Reply Satish.
And one more thing i want to clarify with you ...
Here i am going to Install XI 3.0 with WAS 6.20.
1......I installed j2sdk1.4.2_12
2......Installed Oracle 9i
<b>Question1:-</b> Do i need to Patch it to Oracle 9.2.0.7.0?????????
Or I can do it Later Also???????(At Present I dont Have it)
I Installed Up to Here.
3.....After this I wil Install WAS 6.20 with ABAP + JAVA Stack
( I have Doc for this).......
4....After this I wil Install XI 3.0
I think this is the XI Installtion.....
<b>Question2:-</b> Is this way of Installation is Correct?????
<b>Question3:-</b>After Completion of All these We should do the XI Post Installtion...Right?????
<b>Question4:-</b> When can we Apply the Support Packs And Patches??????? In the Post Installation Or After the Post Installation?????
Please Give me the Right Direction To Install the XI Successfully.......
Helpful ANS Wil be REWARD Points
Regards
Khanna -
Hello,
Im going through this document;
Master Guide ; SAP Enhancement Package 5 for SAP ERP 6.0 Powered by SAP NetWeaver
Using SAP Enhancement Package 5 for SAP ERP 6.0 and SAP NetWeaver 7 including Enhancement Package 2
Im having a point to clarify;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack. This approach reduces installation, modification adjustment, and testing effort. Using this strategy, you can install SAP enhancement packages as a normal maintenance activity together with Support Package stacks.
Whats meant by ;
SAP enhancement packages have Support Packages of their own that are equivalent to the Support Package versions of the underlying SAP system.
We highly recommend installing the enhancement package in combination with the latest available Support Package stack.
Can you help me to clarify this with an example
regards,
ZerandibHi,
Let me give you some basic example to make this statement clear.
We should first of all distinguish between the terms upgrade and update.
UPGRADE means from one Major release level to Another Major Release. Eg: R/3 46C to ECC 6.0
UPDATE means it can be either support package for installed components or Enhancement Packages for existing component.
Instead of upgrading the the entire RELEASE SAP has come up with EHP updates. This give you all major new changes without
doing a complete release upgrade. Also Downtime is reduced.
Consider this component
SAP_HR 470 0010 SAPKE47010 R/3 Enterprise 4.7 system
If this is upgraded to EHP 5 then the naming convention becomes
SAP_HR 605 0043 SAPKE60543 ECC 6.0 with EHP 5
Just like how we have support packages for each component. WE have support packs for the enhancement packages too.
More information can be pbtained in the below link
http://service.sap.com/erp-ehp
Refer to this SAP notes for further understanding.
1484460 EHP5 for SAP ERP 6.0 SP Stacks - Release & Information Note
1064635 SAP ERP Enhancement Packages: SP Stacks Release Info Note
1298878 Installation of SAP Enhancement Package 5 on SAP ERP 6.0
774615 Support Package levels of ERP/ECC installations/upgrades
I hope I was able to clarify your questions.
Regards,
Naveen.
Edited by: Naveen Kumar on Feb 29, 2012 10:41 AM -
Upgrading the BI Content to 7.03 and Support package 14 in BI client
Hi Experts,
My Production system is having BI content 7.03 and the support package is 1. I wish to import the support package upto 14 as soon as possible for my requirement.
Can anyone please answer my below questions..
1. What steps should be followed ?
2. What should be taken care of ?
3. What downtime should I take ? Should it be for R/3 and BI both ?
4. Should I clear the queues in RSA7 before upgrading the content ?
If some point is left, please write it so that it can be considered in my case.
Your help at the earliest will be appreciated.
Thanks in advance.
Regards,
RomilNote 1000822 - Overview: Notes for the add-ons BI_CONT and BI_CONT_XT
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/c0994772-53d7-2a10-7eb3-a8cee3cf5c35 [original link is broken]
https://websmp208.sap-ag.de/swdc
Colin -
[SOLVED]Install kernel failed and how can I repair my system.
In order to get suspend function, I try to compile a new kernel, I used the second method in http://wiki.archlinux.org/index.php/Ker … rom_Source with makepkg and pacman. I download 2.6.31 kernel and makepkg is OK, but pacman tell me /lib/***(lots of
files name) can not be overwritten. I'm not very happy, what make matter worse, I reboot my
system, it seems it lost some modules, it do not mount ext4 partition and can not find Ethernet.
I have lots of data in this system, I could not erase the hard disk and re-install the whole system. Is there a good way to repair my system?
my system have 5 partitions: /,/boot,/usr, /home, /var, I hope these partition can be all reserved as possible.
Thank you in advance.
Last edited by netawater (2013-06-14 00:48:56)First off - you should _never_ use the default name when rolling your own kernel, _always_ give it a unique name! (this way, you can always go back to your previous, working kernel/modules) - by the way - have you tried booting the fallback kernel?
One safe way of keeping your own data - boot from a live cd/usb stick without involving the current OS at all. Then use an external usb-drive (hey - these days you can buy a 1TB usb drive for less than 100 bucks - it's a no-brainer!) and copy all the data you are concerned about to the usb-drive.
Once that is done you can start experimenting - or just plain and simple reinstall or try to reinstall the original kernel. If some of your partitions wont mount (private data), then remake to ext3 _after_ having backed it all up.
I have not looked at the wiki, but I'm sure there is some warning about kernel naming - at least I _know_ that subject has been discussed in this forum. -
Netweaver developer studio and support package
we use JDI and netweaver developer studio for webdynpro development. when we upgrade satellite systems to latest sp, what should we do with developer's pc (j2ee engine and developer studio)? if we upgrade them to the same latest sp as in development satellite system, we will be compatible with development, but what about production system support? production will still be at the current old sp version. do we need another developer pc to support the current development on current sp?
Thanks
JaneHI,
Its better to maintain WAS.NWDS and JDI on same SP level to avoid conflicts between different SPacks.
Recently there is a blog on the same on SP levels.
/people/marion.schlotte/blog/2005/10/25/jdi-software-vs-jdi-content
hope this helps you ..
Refer this note 790922 will be able to help you
Regards,
RK
Message was edited by: Ramakrishna Venkat
Message was edited by: Ramakrishna Venkat -
Hi Expert,
Can somebody please provide me the detail matrix for _plugins & support packages_ for connecting the PI , SRM, APO & SolMan source systems to the SAP-BI 7.01 .
Thanks Alot
MohammedHi All
We need matrix for BI7.04 & service pack 2 as same below link
https://websmp207.sap-ag.de/~sapdownload/011000358700007362962004E/func_corresp.htm
Thanks & Regards
Anuj -
Translation Worklist and Support Package application
Can anyone explain me what'll happen with a published Translation Worklist when I apply a SP? Will it lose the translated texts?
Do the worklist keep the translated texts or they are loaded from the objects every time? If the second is the right, they'll be lost when I rewrite the objects, correct?
Thanks for any help.Hi Denis,
> Where the translated texts are stored? They are stored only until we publish the
> translation and then if we re-activate the worklist they are reloaded from the
> objects?
That's exactly what I would think for different reasons, but it's not that hard just to test it, isn't it?!
Best regards
Detlev
Maybe you are looking for
-
My blackberry ID is not working !!!
hello world. first of all im sorry for my bad english, second i have formated my blackberry and i did a coby with blackberry desktop software but when i try to sgin in it says the password is wrong. and when i try to reset a new password the Verifica
-
I am trying to post the question in a different way. My previous post on the related subject can be found at Re: 1-1 mapping Two entities, Parent and Child, where a Parent has a Child (privately owned) or zero Child. In object model, Parent has an at
-
Naming Standards: What are you using?
I'd like to hear what different organizations are using for naming standards to manage their XI environment. When you have a new interface or need to call up an existing interface, how do you know where to find them? Do you break out your interface
-
Data-source.xml location
Hi. I have a web application, so I included the file data-source.xml and orion-application.xml in the project. If I run the application through JDeveloper every thing is ok. But if I make a deploy in the server, I get the following error: javax.namin
-
Does anyone know how I can improve the performance of starting partitions on Open VMS? I am testing an application which has 5 partitions and it takes a very long time for them to start. The environment manager and repository manager are on the same