Install LabVIEW, LabWindow, TestStand and Device Driver

I need to install LabVIEW (on DVD with Device Driver), LabWindow, TestStand, and Device Driver.
What's the best order? TestStand, LabWindow, LabVIEW w/ Device Driver?
Do I need to reboot 3 times? or once after all installed?
George
George Zou
http://webspace.webring.com/people/og/gtoolbox

The way I did it last (LV8.5.1, TS 4.0) was in this order. LabVIEW, LabWindows/CVI, Signal Express, Toolkits, Device Drivers, than finally TestStand. I know you want to do TestStand last. It worked great for me.
Using LabVIEW 2010SP1 and TestStand 4.5

Similar Messages

LabVIEW, LabWindows, TestStand Freelancer

Test Engineer looking for contract-type work, and open to full-time opportunities as well.
As part of my professional career I have developed very large LabVIEW/LabWindows/TestStand test programs. Some of these ATEs are currently deployed in engineering labs and production environments at CMs such as Sanmina, Celestica, Benchmark; the CMs are across different geographical areas (Mexico, USA, Thailand, China).
Experience controlling different types of equipments such as oscilloscopes, power supplies, DC loads, network traffic generators, Data Acquisitions Units, relays, DIO, etc. Experience developing applications where units run in serial and parallel modes.
LAVA username: nitulandia
Please send me a Private Message for additional details.
Fluent in English and Spanish.
Thank you for reading this.

Bonjour,
Je cherche à envoyé des requêtes en TCP/IP sur un module 'maison', et récupérer les éventuels réponse. (LabVIEW)
Faire cette procédure en boucle jusqu'a ce que je reçoive une réponse comportant une anomalie, l'arrêter (par ex) et l'inscrire dans un rapport. (TestStand)
J'ai déjà fait le Module LabVIEW, j'aimerai intégrer ce module dans une séquence TestStand pour automatisé l'envoie et la prise de décision en fonction de la réponse reçu.
Donc au final pouvoir choisir ce que j'envoie avec TestStand:
[TestStand: requêtes -> [LabVIEW] -> réponses ]
Assez compréhensible ?
Cordialement,
Anthelme
P.S.: Je dois avoué ne pas avoir compris vos solutions proposé...

Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbperson

You don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media.

How do I re-install the apple USB mobile device driver once it has been deleted?

Hi,
I was having issues getting my Itunes to recognize my Iphone 4s so I followed the apple support instructions here: iOS: Device not recognized in iTunes for Windows and it said to delete the driver software (Step 2 of Reinstall the Apple Mobile Device Driver). After I did that I have been unable to get any of the steps that follow to work. Is there any place that I can download the Apple mobile device USB Driver software? I have tried numerous things including re-installing Itunes multiple times but this does not appear to reinstall the driver software. Any help is greatly appreciated.
Thanks,
Brian

Try these steps:
In the Device Manager window, right-click "Universal Serial Bus controllers" and choose "Scan for hardware changes" from the shortcut menu.
Locate the Apple Mobile Device USB Driver in this list. If the Apple Mobile Device USB Driver is not listed, continue to step 3.
Expand all the sections labeled below (not all sections may be listed):
Imaging Devices
Other Devices
Portable Devices
Universal Serial Bus Controllers
Look for the entry that recognizes the device as a camera. This entry should be called Apple iPhone, Apple iPad, Apple iPod, or Unknown Device. (Verify the Unknown Device is the Apple Device by unplugging the device and scan for hardware changes again [Step 1] to see if it disappears.)
Right-click the Apple iPhone, Apple iPad, Apple iPod, or Unknown Device entry in Device Manager and choose Update Driver from the shortcut menu. (Verify the Unknown Device is the Apple Device by unplugging the device and scan for hardware changes again to see if it disappears.)
Click "Browse my computer for driver software."
Click "Let me pick from a list of device drivers on my computer."
Click the Have Disk button. (If the Have Disk option is not present, choose a device category such as Mobile Phone or Storage Device if listed, and click next. The Have Disk button should then appear.)
In the "Install from Disk" dialog, click the Browse button.
Use this window to navigate to the following folder:
C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
Click OK in the "Install from Disk" dialog.
Click Next and finish the driver-installation steps. Open iTunes to verify that the device is recognized properly.

Continual reboot and device driver missing

Hi, I have a t400 installed with both win7 and ubuntu 11.04. The system suffers from continual reboot, basically when I shutdown the machine, it automatically and forcibly get rebooted.
I have followed some instructions on the web, and there is a device driver missing, which is PCI simple communication controller. I have tried download AMT package, which does not work for me. It gets stucked in a terminal saying that I need insert TN33, which I dont have. My t400 type is 7417. Any comments are appreciated.

hey tristartom,
continuous reboot occured after installing ubuntu yes ? could you remove ubuntu and have your unit on a mono-boot with windows and see if the same error occurs.
if it doesn't happen, then i suggest heading to Ubuntu forums or the Linux thread in this forum and check with other linux users if they have experience this same issue as you.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Iphoto 6 and device driver for HUE hd webcam from Clique Communications

After I installed the driver for that webcam (Clique Webcam 1.3 driver) iphoto iphoto started crashing as soon as I open it. The problem goes away if I uninstall the device driver. Anybdy has a fix?

Welcome to the Apple Discussions.
My first port of call would be the makers of the driver. Is it trying to install some portion of quicktime? It this version up-to-date?
Regards
TD

Wont Install APPLE MOBILE support and device

I need help people.. I have had an iphone for over a month now and have never synced this phone with MY computer. I have read many tutorials and even tried something somebody suggested on this forum - Winrar and download each file seperately. i have disabled DEp and UAC functions on windows and even after i did this and tried to install APPLEMOBILESUPORT an error still arises.
I am not usings 64 bit vista and i have read many blogs from people saying they have been successful.. If anyone can help me i would be so happy.
Thanks!

Hey sorry - i have been sitting in front of this computer reading and trouble shooting for hours.
I have had this phone for one month.. The day it arrived i installed itunes and when i plugged the phone in itunes did not recognize the phone. Windows recognized it as a camera and that is it. I had to go to a friends house in order to activate my iphone.. I have never synced this phone with my home computer. I have maintained and managed pictures and music using my friends PC.
I am running 32 bit windows vista home edition and when i install itunes there is an error message. I have noticed that the program APPLE MOBILE SUPPORT has not installed. itunes works fine and i have read trouble shooting tutorials for days.
Anyways i came across a thread in this forum which stated a user simply opened the setup.exe file of itunes and extracted each file using WinRar.. I have done this and everything has installed properly except for this file: AppleMobileDeviceSupport.msi - when i install this program, right before the finalization it simply says that there was an error and the process rolls back -exactly what would happen when i downloaded itunes - except the rollback simply skipped the installation of the AMDS.msi file and itunes is working perfectly.
I am currently running Windows Vista 32bit Home Edition and i have brand spanking new iphone that will never be hacked. Sorry if i wasnt clear in my first post and i look forward to your reply.
Message was edited by: Zoinkz

Install LabVIEW 32-bit and 64-bit on same computer - doesn't seem to work

I have the LabVIEW 2011 Development System. The FAQ at http://digital.ni.com/public.nsf/websearch/71E9408E6DEAD76C8625760B006B6F98?opendocument&Submitted&&... says that the 32-bit version and 64-bit version can be installed on the same machine. I would like to do this because some of the targets for executables are 64-bit and others are 32-bit. I have tried this on two different computers and wind up with two non-working versions of LabVIEW. The license refuses to activate until I do a complete uninstall of both versions and pick one to reinstall.
Is there some trick to this or is the FAQ just wrong?

abikutn wrote:
Install 32 first and then 64 . But either way both should be installed in the same directory and not in two diff places. 64 uses some shared files from 32.
Wrong! (Please provide an authorative link to support your outrageous statement)
LabVIEW Champion . Do more with less code and in less time .

Clean Install of Snow Leopard and Multiple Drives

Greetings,
I want to do a clean install of Snow Leopard because of various issues carried over from previous upgrades and the like. I have the original 250 GB ATA drive and a 1 TB ATA drive installed, plus a couple of other external drives available via USB and Firewire. I was wondering if there would be a recommended configuration of the install of the OS utilizing the multiple drives? i.e. using the 250 GB drive exclusively for the OS and the 1 TB drive for Applications, music files, photos, games, etc. would I have to make any specific changes to the location of any of the folders and would this create any problems when doing so? Am I over thinking this? I am a little confused as to how to approach this. Please help any advice will be appreciated! Thanks in advance!

wildcheese wrote:
I want to do a clean install of Snow Leopard because of various issues carried over from previous upgrades and the like.
What kind of issues? There are very few that warrant a clean install to eliminate & some that will just recur until you find & eliminate their real cause.
I was wondering if there would be a recommended configuration of the install of the OS utilizing the multiple drives?
The only ones I recommend are those that dedicate a drive other than your normal startup one for backups. To be clear, I mean that the originals & the backups should be on entirely different drives, not just on different partitions of the same drive.
i.e. using the 250 GB drive exclusively for the OS and the 1 TB drive for Applications, music files, photos, games, etc. would I have to make any specific changes to the location of any of the folders and would this create any problems when doing so? Am I over thinking this?
Yes, you are probably over thinking this.
There are some advantages to using a different drive for user files & possibly even for the entire user home folder, but there are also possible problems for any configuration different from the standard one with the OS, apps, & all user folders on the same startup drive. As already suggested, you can move large users folders for some apps like iTunes libraries to a different drive (or even split the media content among different drives) but unless you have a compelling reason to do so, it is much simpler to leave everything in the default configuration.

Does Instrument I/O Assistant only work in the activated version of LabView 8.0 and not in evaluation version?

I'm using the LabVIEW 8.0 evaluation CD and every time I try using the Instrument I/O Assistant I get this error message "Measurement and Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from the LabVIEW Driver CD." So I tried installing both from the Device Driver CD and still it didn't work. I also tried uninstalling all NI softwares and components and reinstalled everything from the LabVIEW evaluation CD and Device Driver CD and still the same result.
I was wondering maybe the Instrument I/O Assistant will only work after I activate LabVIEW. Is this the reason why I can't use it or does Instrument I/O Assistant also work even if I'm only using the evaluation version? Please help!

Glynster -
Yes, Instrument I/O Assistant does work with the evaluation version of LabVIEW 8.0. However, you need to install Instrument I/O Assistant from a version of the National Instruments Device Driver CD that shipped with LabVIEW 8.0 (or later).
NOTE: The link provided for Instrument I/O Assistant 1.0.1 DOES NOT work with LabVIEW 8.0. It is only for LabVIEW 7.x.
You will need to obtain a Driver CD to get Instrument I/O Assistant to work with LabVIEW 8.0
-Tommy

Using multiple motion driver versions on one system...(with Labview 6.1 and Labview 8.0)

Using Labview 6.1 and Labview 8.0 on same PC computer (my development system).
Labview 8.0 applications, I would want to use the motion 7.x drivers
Labview 6.1 applications, I want to use motion 6.x drivers
(Of course, Labview 6.1 can not use motion 7.x drivers).
When I installed Labview 8.0 and motion 7.x drivers, it removed my motion 6.1
drivers (and all the vi's) and installed motion 7.x drivers (with vi's).
Of course, Labview 6.1 applications can not run with motion 7.x drivers.
How can I keep my Labview 6.1 applications running and building
with motion 6.x drivers while still having Labview 8.0 applications
with motion 7.x drivers (all on the same system).
And then, of course, the executables, on other systems with the 6.x and 7.x drivers.

Unfortunately there is no way to install multiple versions of a
hardware driver on a single operating system. This is not only true for
NI Motion but for any type of peripheral hardware. Windows can only
assign a single driver to a specific piece of hardware.
From my point of view the best solution would be to upgrade your
LabVIEW 6.1 application to LabVIEW 8.0. If this is not possible for
some reason you could install a second Windows on another harddrive or
partition and install LabVIEW 6.1 and NI-Motion 6.x on this system and
LabVIEW 8.0 and NI-Motion 7.x on the other one.
Best regards,
Jochen Klier
National Instruments Germany

Re-install of keyboard and mouse driver

Re: HP Envy 17t-3000 CTO Notebook PC
I want to re-install the original keyboard and mouse driver. I have the original discs -- how do I do it?
Thanks

If you are only talking about keyboard and mouse then it do not require additional installation as the it will be installed automatically. IN addition you can install this software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111895-1&cc=us&dlc=en&lc=en...
ALSO
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Blue screen after installing labview 8

I recently installed Labview 8 Professional Dev. Suite on to a Win. XP SP2 system. The image before installation was stable. After the installation and reboot, the system blue screens (I have been unable to read the exact message on the blue screen) and reboots. I was able to boot if I selected "using last know configuration" option in the Windows XP boot options, indicating that the problem is driver/registry related. After I use the last know configuration, I get an error message "nidevmon.exe - Application Error. The application failed to initialize properly (0xc0000142). Click on OK to terminate the application."
I tried to repair all of the installed NI products without any success.
Device manager shows all devices installed properly without any conflicts.
Please advise on how I can resolve this installation conflict.
Thanks.
--Jeff

Hi, I am experiencing the same problem. When my system boots up I receive the "nidevmon.exe could not be initialized" error message. When I try to manually start the program after startup, I still get the same message. I am running Microsoft Windows XP [Version 5.1.2600] and have also updated my system with the latest patches. I have the ni USB-6008 device. My system is an IBM Thinkpad T40, 1.5Ghz Centrino, with 512MB ram, and 80GB hd. I have installed labview 7.1 and then NI-DAQmx 8.0 that came with the card.
Furthermore, the hardware does not succesfully install on my system. After I install the software, reboot and plug the usb device in, the hardware wizard pops up. However, in the end, I get "Windows cannot initialize the device driver for this hardware. (Code 37)". I suspect this has to do with the nidevmon.exe not initializing. The ni hardware appears to be fine, I have successfully installed the devices in another system. I uninstalled and reinstalled the ni-daqmx 8.0 software several times, and even downloaded version 7.5 from the web, however this did not solve the problem either. I would appreciate any suggestions..
Thanks,
Arash

SCXI Device Driver - can not find

Hello NI,
Please drop my last request. We had a PCI device conflict with a CompactFlash PCI card.
Thanks, Larry Scott
====================================================
I just installed Labview followed by NI Device Drivers for Data Acquisition (Measurement and Automation explorer) on a new HP desktop running Windows 2000.
I then installed a NI6024E DAQ card and rebooted the PC. I get a "New Hardware Detected" message. When I select "Search for appropriate driver", no driver is found. I specify to look for the driver in my C:\WINNT\inf directory. Still no driver is found.
Can you please tell me where I can locate the driver for my NI6024E DAQ card ?
Thank you,
Larry Scott
OSRAM Opto Semiconductors
408-456
-4072

Larry,
The NI 6024E is supported by the NI-DAQ driver. NI-DAQ 7.3, the latest version of the driver, is available for download in the following location:
NI-DAQ Version 7.3 for Windows 2000/NT/XP
Spencer S.

PRoblems between audigy2zs and 9800pro drive

I have been having a lot of trouble installing my new sound card into my system. Here is the steps I have taken. I installed windows xp pro w/sp2 integrated. I installed all mobo drivers(the onboard sound is disabled in the bios). I then installed the ATI catalyst driver latest version. Next I installed my sound card and software/driver that came with the soundcard. Now here is my problem, when I hit the equalizer on the creative taskbar(the one on the top of the desktop) it gives me an error message that it cannot find the device that that software operates. Now that doesnt sound like a big deal...but in addition to that it also causes my internet to go offline...the moment I start an application that uses hardware sound acceleration(games). Here is what I have done to try to repair this problem.
) Change the order of items installed. This is where I figured out that it was my catalyst drivers causing the creative software not to work correctly. The creative stuff wroks fine as long as the win xp default software is loaded in for my graphics card. The moment I install the updated graphics driver I loose the graphics equalizer.
2) Change the slot that the sound card is intstalled into. (I have tried them all same result.)
3) Updated drivers from creative.
4) Tried different catalyst drivers.
As a side note the only way I can get the internet to work with games is to disable the sound card in the system control panel...and onboard sound through the bios. Otherwise it will give me the boot everytime.
Also I just wanted to mention that the entire system worked flawlessly before the addition of this card. I was simply unhappy with the quality of my on-board sound. I never had any idea I woul dhave this kind of problems. Here is my system specs.
AMD 2500+Barton
Soyo KT600 Ultra platnum plus
WD 200Gig SATA dri've
gig PC3200 Corsair XMS
Soundblaster audigy2 zs platinum
Hercules prophet 9800Pro
I appreciate any help given with this problem I have never had problems like this and am somewhat lost in what to do. Thanks Ken

well, i have ahn saphire 9800pro and audigy 2 sz platinum and internet cable and never had this kind of problem, try to install the audio card on the last slot.
or try to install xp without the sp or 2.

Install LabVIEW, LabWindow, TestStand and Device Driver

Similar Messages

Maybe you are looking for