Install Leopard and maintain POPFile, Anacron

I am interested in upgrading to Leopard. I have a few custom things going on with my Tiger install. I run POPFile for email filtering. I had to install some Perl modules, and make a startup script. Additionally, I have installed Anacron for Mac OS 10.4 to run the daily, weekly, and monthly maintenance scripts. What is the best way to proceed? If I buy Leopard and install, will this setup continue to run? Or do I need to do some other kind of install? Do I need to remove Anacron? Any thoughts here?

Expanding on what Templeton said, since Leopard has not been released, we cannot say with certainty what will and won't be possible. But it's not been possible in the past to install a full new version of Mac OS X through Apple Remote Desktop, and I'd be very surprised if that became possible with Leopard.
assuming I buy the multi-user license (or family pack)?
Just FYI, the terms of the family pack only cover systems that are "located in the same household and used by persons who occupy that same household" (quoted from Apple's terms). The family pack license will not cover a system that is kept elsewhere, even if that system is owned by a close relative unless that relative is a student member of your family who still resides at your home but is away at school.

Similar Messages

  • Installed Leopard and now MacBook can not run on battery

    I installed Leopard and now if it is disconnected from the power it will shut down immediately. It worked fine before.. How do I fix?

    You might try to reset the SMC (System Management Controller) and/or PRAM (Parameter Random Access Memory). Mac OS X: What's stored in PRAM?

  • 1Z0-238 and 11i Install, patch and maintain.....

    hi,
    I took the "11i Install, patch and maintain Oracle Applicaiton" course from oracle university about couple of years ago and now we are already on release 12.0.6. I want to attempt 1Z0-238 which is actually a R12 certificaftion exam. Question is; Can i attemp 1Z0-238 a release 12 exam with a course taken from previous release.
    I dont want to be in situation where oracle will say either take the R12 course or re attemp an 11i exam..... :(
    Your valueable comments are very much appriciated.
    thansk and regards,

    Anyone know if there are any plans in the works for an Oracle Press book for the 1Z0-233 exam?
    Also, has anyone read:
    Installing, Upgrading and Maintaining Oracle E-Business Suite Applications Release 11.5.10+ (Or, Teaching an Old Dog New Tricks - Release 11i Care and Feeding (Paperback)
    by Barbara Matthews (Author), John Stouffer (Author), Karen Brownfield (Author)
    http://www.amazon.co.uk/Installing-Upgrading-Maintaining-E-Business-Applications/dp/0615141226/ref=pd_bbs_3/203-4846580-6320739?ie=UTF8&s=books&qid=1188203474&sr=8-3
    And is it any good? No reviews yet on amazon, or elsewhere that I've found.
    Thanks for the info,
    Tony

  • Oracle EBS R12: Install, Patch and Maintain Applications  1z0-238

    Hi,
    I am planning to give the above exam. Can you please let me know if this exam is for R12 or R12.1.1 or 12.1.2 version ? I mean which version of documents i should refer for practicising this exam.
    Thanks in advance.
    Suneel

    Hi Suneel
    Herewith a suggestion about what docs to use
    First see the exam objectives
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=1001&lang=US&p_exam_id=1Z0_238
    Try to get your manager&company to finance you some training course
    Recommended Training and Preparation
    R12 Oracle: Install, Patch and Maintain Oracle Applications
    OR
    R12 Oracle: Install, Patch, and Maintain Oracle Applications - LVC
    if not possible with the exam objectives read the proper chapter from the documentation
    http://download.oracle.com/docs/cd/B34956_01/current/html/docset.html
    and this excellent blogs contains also advices http://www.oracleappsblog.com/index.php or this book could be something ? http://www.amazon.com/Oracle-Applications-DBA-Covers-11i/dp/0070077290
    hope this helps

  • Book for exam 1Z0_233 - 11i Install Patch and Maintain Oracle Applications

    Hi,
    I am looking for Study guide / exam guide for the exam 1Z0-233 : 11i Install Patch and Maintain Oracle Applications
    http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=&lang=&p_exam_id=1Z0_233
    I have Oracle education book which is issued after attending 5 day training course. That is good enough
    But Still want to have Books that we get for Database track certifications
    I think, since this certification is new, it might not be published yet
    Have checked Amazon.com and OraclePress.com
    Anybody has any clue ?

    Anyone know if there are any plans in the works for an Oracle Press book for the 1Z0-233 exam?
    Also, has anyone read:
    Installing, Upgrading and Maintaining Oracle E-Business Suite Applications Release 11.5.10+ (Or, Teaching an Old Dog New Tricks - Release 11i Care and Feeding (Paperback)
    by Barbara Matthews (Author), John Stouffer (Author), Karen Brownfield (Author)
    http://www.amazon.co.uk/Installing-Upgrading-Maintaining-E-Business-Applications/dp/0615141226/ref=pd_bbs_3/203-4846580-6320739?ie=UTF8&s=books&qid=1188203474&sr=8-3
    And is it any good? No reviews yet on amazon, or elsewhere that I've found.
    Thanks for the info,
    Tony

  • R12 - Install, Patch and Maintain. Is It Necessary?

    We are planning to go to R12 soon...is this class necessary given the fact that I went to the same class for R11? Are there enough changes to warrant taking this course? Everyone, let me know your thoughts...

    Hi,
    I would say save the money and go for another course instead. There are no much changes when it comes to the installation and applying patches between 11i and R12, and you could refer to these links for the topics which are covered by the two courses.
    11i Install, Patch, and Maintain Oracle Applications
    http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D17423GC51&p_org_id=&lang=&source_call=
    R12 Oracle: Install, Patch, and Maintain Oracle Applications
    http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D49656GC10
    Covering the topics in "Maintaining Oracle E-Business Suite Documentation Set" for R12 should be enough to cover the topics which were introduced in R12.
    Applications Releases 11i and 12
    http://www.oracle.com/technology/documentation/applications.html
    Regards,
    Hussein

  • De-installing Leopard and re-installing Tiger

    After installing Leopard, my Final Cut Express won't work, so I want to de-install Leopard and Quick time 7 and re-install Tiger and earlier versions of Q Time. Do I do this?

    By erasing your hard drive then reinstalling Tiger and all required updates. Be sure to backup your files first so they can be restored after the reinstallation.

  • Just installed Leopard and now I can't send an e-mail

    I just finished installing Leopard and now I can't send or forward an e-mail. It wont even let me click on send. I'm not getting any error messages either. Anyone know why I can't send an e-mail?

    Since upgrading to Leopard, we have had trouble sending email. Usually couldn't but sometimes it would allow an outgoing message. Hours spent with tier 2 tech support, at Apple, AT&T and Netopia. All Mail settings were verified as correct. I saw a possible solution somewhere else in this discussion forum and tried it. Now Mail is working fine, with consistent email sending. Solution for us was to get the DNS numbers from AT&T and enter them on the Mac under System Preferences/Network/Advanced/DNS. The only DNS number listed there was the one for our Netopia 3347 modem. I clicked the + and added both the Primary and Secondary DNS numbers provided by AT&T. Clicked "OK", "Apply". Then I rebooted--don't know if that was necessary--but now email sends easily and so far no more "server does not support authentication" error messages. It was an easy solution, so it's worth a try.

  • Test questions/ dumps for 1Z0-233 (11i install, patching and maintain apps)

    Dear All
    Does any one have test quesitons / dumps / samples for 1Z0-233 (11i install, patching and maintain apps)
    regards

    Hi All,
    I'm already an OCP in 8i, 9i and 10g. I wanna take 1Z0-233 exam.
    I cam to know that one who is certified in 9i or 10g can directly write 1Z0-233 exam without attending any Oracle Official training courses for the same.
    Please clarify my doubt, as I'm gonna appear 1Z0-233 exam shortly.
    Let me know if any information on this.
    Thanks in advance.
    Regards,
    SYED.

  • After install Leopard and iTunes 9

    After install Leopard and iTunes 9, iTunes lock, when I connect my iPhone.
    What can I do?

    It was a permissions problem causing it.
    Get Info and the Sharing And Permissions section did not show it up.
    File Examiner (http://www.gideonsoftworks.com/filexaminer.html) shoed the problem with the permissions and allowed me to give the files the correct permissions again.
    From what I have been reading, the whole permission 'system' under Leopard seems to be a bit screwy anway. File Examiner seems good in that it shows you the 'real' file system permissions and not the 'user friendly' meaningless name Leopard gives.

  • Just Installed Leopard and all my files are GONE!

    Yesterday I installed Leopard and now all of my files are gone. I don't remember being asked how I wanted to install it...but on www.apple.com/support, it said that there were options like "Erase and Install." I don't remember choosing that, but if I had, is there any way to restore my files or does it do a zero erase of the hard drive? I don't have anything backed up, so thus far, I have lost 3 term papers that I was in the middle of and don't have anywhere else... Can anyone help?

    Even with minor OS patches and updates, I don't rely on "just do it" but verify and repair, backup, and only then apply updates (and lately, waiting a week first).
    Stop using that disk.
    See if Data Rescue II demo can see anything or not (you should install 10.4.10 on another disk drive and work from there, guess you are now?)
    Pre-existing errors that you weren't away of? If anything I've thought for a long time that installers should:
    warn about and offer to backup
    set a restore point in some manner
    verify and repair the boot drive
    ( and this would be done in Single User Mode behind the back )
    updates should be written to disk, but applied on restart, again in Single user mode
    No weekly or monthly backup routine or schedule? no DVDs with your photos and papers? not in 3 yrs!!! kind of hard to understand you never heard of backups, or burned a DVD of documents for "safe keeping."

  • Install Leopard and Snow Leopard from an external drive?

    Hey guys,
    I have a 120GB ext drive and was curious as to if its possible to install Leopard and Snow Leopard from it if I have the DMG's. I guess my main question is how would I setup formatting in Disk Utility?
    Thanks!

    Set up two 10GB partitions and a third partition for the rest of the drive on the external drive, use Disk Utility to "Restore" the mounted installer DVD to a 10GB partition on the drive.
    Plug the drive into a Mac and hold the option key down during boot. Select the installer you wish to use.

  • Please help - finally installed Leopard and can't login

    Okay, so I finally stepped into Y2K and joined the rest of the world (albeit a bit late) in installing Leopard on my laptop. However, when I get to the screen where it asks for name and password, I don't know what to enter and no matter what I try I keep getting the annoying little shaky thing when I do it wrong, time after time.
    I have never had a user id or password, so I don't know what to do here. I am not very tech savy, so please have patience with me. I know that when I used to try to install software, or download an update in 10.3, I was prompted for a password. Is that what they are looking for here? Or are they asking for something completely different? I don't even know what to put as my user name either.
    I have scoured the forums and support sites reading about people with similar issues (from 2 years ago... I know)and they keep directing me to different sites. I have tried everything, and nothing seems to work.
    First I tried this link: http://support.apple.com/kb/TS1400?viewlocale=en_US
    But I got a message saying that my password change would affect my keychain, but not my login (which does me no good if I can't log in!)
    Then I tried this link: http://support.apple.com/kb/TS1543?viewlocale=en_US
    But as I was typing the part (dscl . -delete /Users/username AuthenticationAuthority), I was getting an error that said something like "NoNode..." or something like that. So I couldn't get this to work either.
    My computer says my name (Erik Lundeen) on the startup screen, but I think my profile name is simply "erik". I have tried both of these as options to log in, as well as my password (the one I used to get asked for in 10.3 when I would install or update something)... which is simply and originally "mypass". But that doesn't work either.
    I know this is very late in the game, but if somebody has any ideas or suggestions for how to get past this and back into my computer, I would GREATLY appreciate it!

    Erik J Lundeen wrote:
    Okay, so I finally stepped into Y2K and joined the rest of the world (albeit a bit late) in installing Leopard on my laptop. However, when I get to the screen where it asks for name and password, I don't know what to enter and no matter what I try I keep getting the annoying little shaky thing when I do it wrong, time after time.
    I have never had a user id or password,
    yes, you did. every user has an id and a password. the password may be empty but it's there.
    so I don't know what to do here. I am not very tech savy, so please have patience with me. I know that when I used to try to install software, or download an update in 10.3, I was prompted for a password. Is that what they are looking for here? Or are they asking for something completely different? I don't even know what to put as my user name either.
    I have scoured the forums and support sites reading about people with similar issues (from 2 years ago... I know)and they keep directing me to different sites. I have tried everything, and nothing seems to work.
    First I tried this link: http://support.apple.com/kb/TS1400?viewlocale=en_US
    this is the correct link to use.
    But I got a message saying that my password change would affect my keychain, but not my login (which does me no good if I can't log in!)
    no, that's wrong. it's the other way around. it will change your login password but not your keychain password so you won't have access to your old saved passwords unless you can recall what your old password was. use the link above.

  • Blue screen appears after installing Leopard and restarting

    I tried to install Leopard on my MacBook but got the Blue screen after restarting. I found the apple support article number 306857 and tried option C without success. I don't have a firewire cable so option A is out. I don't know how to reinstall Leopard as Option B suggested. I can't get beyond the blue screen. Any suggestions?

    The Apple site is under maintenance, so I can't check the details of the options, but I assume option C is the terminal, when you've started up in Safe Mode. This method worked for me on two machines. You need to type the commands precisely and exactly as they appear in the article, including spaces where appropriate.
    To reinstall Leopard, start up with the installation disk in the drive, and when you hear the startup chime, hold down the C key on your keyboard. You need a USB keyboard. You should get the installation screen.

  • Installed Leopard and can no longer connect to my shared hard drive

    I had a sweet set up with a Drobo (fancy external hard drive) connected to my Airport Extreme base station. Before I upgraded to Leopard, my MacBook Pro would discover the Drobo disk and run scheduled backups without me having to do anything.
    Since I installed Leopard, I can see the Drobo disk in the Finder under SHARED > Airport but I cannot access it. It won't accept my password to connect to it. What's really weird/dumb is that I can use Airport Utility to reset the password and change whatever settings I like... but when it comes to actually using the disk, I'm locked out.
    Anyone know what's going on?

    Podcast Update:
    Jason O’Grady on today’s PowerPage podcast said that in the beta builds of leopard time machine supported airport extreme’s airport disk feature. They only dropped it in the release version of leopard. He’s confident this functionality will return.
    But on today’s MacBreak Weekly podcast, Leo Laporte said as much as he loves his drobo it’s LOUD when it’s working. I wonder if one of his drives is failing. He also said he prefers a backup program called ChronoSync. I’ve never used it.

Maybe you are looking for

  • How to set the maximum heap size on a deployed application?

    I�m running a fairly large java application and am getting java.lang.OutOfMemoryError. I could increase the heap size in my development environment to eliminate this error. However, I don�t know how to set this in a deployed application. We are curre

  • RF Scanner / Implementation

    Hi Please explain the procedure invloved in a RF scanner implementation in a Warehouse. I assume the areas involved are. 1) IMG Mobile config 2) SAP Console setting 3) RF Device to SAP Console communication. Plse give as much information as possible.

  • Installation Error Installing Exchange 2013 CU3 on Server 2012

    Hello, When Installing Exchange 2013 on server 2012 I get the following error during Step 1 of 8 of Transport Service. I have installed and unistalled Exchange a few times, restarted the machine manually and removed exchange from AD, etc. to no avail

  • Http 500 status and exception s

    Hi, I noticed when using WebLogic Web Services that when I throw an exception from my EJB I get http 500 (internal server error). Now this is okay in some use cases but in others such as where an exception is thrown for no data found it is not. Is th

  • Can't start Logic 8

    I am thinking of re-installing the program but will I lose my sounds on the EXS24 sampler? Anything else I can do before re-installing? Thanks for your help Gab