Install Leopard question, and How much RAM should I install on my G5?

I recently bought a G5 Power Mac (11,2) 2.3 ghz, with 2 GB Ram. It has 10.4 installed and the installation disks for 10.4.
I am interested in installing Leopard (I have a drop-in DVD from a different computer), but think it would be wise to first partition the HD so that I can also run 10.4 and Classic from time to time. What's the best way for me to go about this? I haven't put anything on the machine, so there is nothing to back up. After I have the systems installed, then I was going to migrate from my powerbook.
I wonder whether I should upgrade the RAM first. It has 1 GIG each in two slots, so there's plenty of capacity.
Also, the G5 has no airport card installed. Can I set up sharing with my powerbook, via firewire, in a way that I can use the powerbook's wifi signal on the G5? Is this possible with 10.4, 10.5, or both?

Hi maui_arbor, and a warm welcome to the forums!
I'd upgrade to at least 4GB for Leopard, or more...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=234&type=Memory&TI=2 628&shoupgrds=Show+Upgrades
I am interested in installing Leopard (I have a drop-in DVD from a different computer), but think it would be wise to first partition the HD so that I can also run 10.4 and Classic from time to time. What's the best way for me to go about this?
First, are you sure that Disc will work on a G5? Does it boot from it?
Secondly, I'd really not partition for OSX unless it's a GB HD or larger, I'd put a second HD in it for Leopard.
Also, the G5 has no airport card installed. Can I set up sharing with my powerbook, via firewire, in a way that I can use the powerbook's wifi signal on the G5? Is this possible with 10.4, 10.5, or both?
Yes, Internet Sharing via FW or Ethernet. Another option...
http://eshop.macsales.com/search/usb+wifi

Similar Messages

  • How much RAM should I install for new iMAC ?

    Hi,
    How much RAM should I install for new iMAC* running Logic Studio? It comes with 4 GB - is that enough? (can you run in 64 bit mode..)
    *(The 21.5" 3.06GHz Intel Core 2 Duo)
    Also, I was planning to get the stock 1 TB Hard Drive & save projects to an external drive.
    Does that sound reasonable?
    Any other recommendations?
    Thanks,
    Wm Heart

    Unless you plan on running huge projects with enormous sampled instruments, 4 GB will do (very) fine. And your disk plan is sound. Choose an external Firewire drive, rather than USB. FW is easier on the CPU and can handle more tracks than USB.
    What you should get, instead of more memory, is a (24 bit) external audio interface, if you want to do serious recording and playback.
    What type of audio interface you'ld need, depends on what you want to do with it and of course your budget. From decent to brilliant costs from roughly 100 to several 1,000's of europounddollars. Avoid the 16 bit ones, they're worse than the inbuilt audio chip of your iMac. You can recognize 16 bit Audio Interfaces (in webshops) by their prize (often under 100€£$) and the lack of mention of their bitrate.
    HTH
    Regards, Erik.

  • How much RAM should I add to my 2008 iMac?

    Hi everybody,
    I currently own an 20-inch Early 2008 iMac, and I was wondering what would be the best RAM upgrade for what I use the computer for. At the moment, I have 2GB of RAM and I'm running Mavericks, and I can tell that it isn't as fast as Snow Leopard. I use the computer for mostly video editing on Final Cut and sometimes iMovie, and also a little Photoshop here and there.
    My question is: How much RAM should I buy (and from who) in order to speed up my iMac so that it can handle these programs without being painfully slow.
    Thank you!

    Your machine came with two 1GB RAM modules. The most it can take is a total of 6GB, by buying one 2GB and one 4GB module. Don't be tempted to buy these on the cheap, go with Crucial, OWC (macsales) or Ramjet. This will cost about $140. You will see an improvement if you only buy two 2GB ($65) and go to a total of 4GB, but I think you will see a significant additional boost by going to 6GB. The apps you are using can REALLY make use of all the RAM they have access to.

  • How much RAM should I get my new MacBook installed with?

    How much RAM should I get my new MacBook installed with? I'm planning on getting a new Macbook sometime this fall. I'll probably be a light user, mostly internet, email, and your occasional Letter/Envelope.
    Are their any other options that I'll want to make sure that I get?
    Oh, and this will also be my very first Mac.
    Thanks,
    Jeff

    In the link Alvin Ray posted it shows the different configurations that can be used in RAM. Officially Apple states that the MacBook supports 2 GB Ram. It can hold 4 GB but only uses 3 GB. The 4 GB would only benefit the matched pair use for optimum graphics. Unless you do a lot of very graphic intensive work 3 GB should be fine.

  • How much RAM can be installed on a MacPro4.1?

    How much RAM can be installed on a MacPro4.1?

    physically 8 x 16GB, addressable in 10.8.3 is 96GB
    you still on snow leopard? you can also use that.
    6 x 8GB is probably more or as much as you need and try www.macsales.com/memory for kits

  • How much RAM should my system utilise?

    Hello,
    Sounds like an odd question and maybe it is, so apologies i am utterly Newbie here.
    I am running a i7 5930 with 64 gig's of DDR4, typically i am using 70% CPU but the RAM is seldom reaching over 30% usage? Is this odd, am i not applying the software setting correctly?
    Any advise is very welcome
    Simon Brumby

    I've been searching for and reading web pages and white papers put out by Adobe all afternoon and can't find anything suggesting that large amounts of RAM specifically benefits Premiere users.
    System requirements | Adobe Premiere Pro
    4 GB of RAM (8 GB recommended)
    How much Ram do I need? (getting a new laptop, help me please!)
           Todd Kopriva, Adobe staff, says "16GB is plenty" for Premiere.
    http://www.adobe.com/content/dam/Adobe/en/products/aftereffects/cc/pdfs/Configuring_Your_S ystem_20140312.pdf
    It reads: "If you plan to use Adobe Premiere Pro, 4 or 6 GB of RAM is minimum, while 8 or 12 GB is suggested for most users. SpeedGrade is the least RAM-dependent of the applications discussed here; 4GB is the minimum recommended amount, with 8 GB preferred. Although Photoshop’s Minimum System Requirements states only 1 GB is needed, you should consider allocating 4 GB, with 8 GB allowing you to work on very large documents. Remember that each of these numbers are for the software running alone (along with the operating system); add at least their minimum requirements together if you plan on having them open at the same time."
    From what I can gather, Premiere performance is dependent on processor speed, storage speed, and GPU mainly - RAM is not a major player as long as you have "enough" - adding a bunch more does not speed things up any more. The OP was not asking how to build a system, or if he should upgrade RAM, just wanted to know why Premiere was not using all the RAM he has installed. I think the answer is that the software architecture is not written to utilize RAM beyond a certain point. Maybe this is incorrect, then please show me the specs from Adobe.
    I agree that more RAM never hurts - certainly will help if running multiple Adobe apps (or other software) at the same time, as I often do. I mentioned this in my first post, did not say 16GB was total anyone ever needs. After Effects can use gobs of memory!
    Thanks
    Jeff

  • For a new imac how much ram should i get?

    If I buy a new iMac, I see that one can get it with 16GB or even 32GB RAM.  dMy 2007 iMac has 4 GB now after I upgraded?  What would the difference be?

    My 10 cents worth:
    The minimum configurable amount of memory of a new iMac is 8Gb But...
    If you are looking at a new upgradable iMac, absolute do NOT buy the Apple RAM upgrades at the time of purchase. It is grossly overpriced, and although good quality and reliable (I've been led to believe) you can buy just as good, if not better for a lot less. I wouldn't look further than OWC (http://eshop.macsales.com/shop/apple/memory/) or Crucial (http://www.crucial.com/). Both offer matched pairs and kits that are guaranteed to work with your iMac and as you will see, cost a lot less than Apple. Don't be fooled by the price, they supply good quality, fast memory.
    Secondly, in terms of how much RAM, the question is, what is your budget? I always believe that if you can afford it (and memory nowadays isn't that expensive) max out your system and then forget about it because:
    a) There's a fair chance that you'll be upgrading it again at some point if you don't max it out.
    b) You are releasing the maximum potential of your iMac (in terms of memory performance, although the jump from 16Gb to 32Gb will not be as significant as the jump from 8Gb to 16Gb))
    c) If you sell it, the extra RAM will be an attractive option for any buyer.

  • How much RAM should I upgrade too?

    I recently purchased a 13" MacBook Pro. It is a mid-2012 model. It currently has 4 GB. I connect it to an external monitor which makes it easier for me to use while editing. I always have the application sit and load with the spinning ball icon. I use FCPX, Photoshop, and After Effects on a daily basis. I was wondering if the RAM increase would help me create my videos more efficently. Thanks for all the comments and help ahead of time!

    You should benefit from adding more RAM. How much is hard to say but at least to 8 GBs. You might know more if you observed your memory usage in Activity Monitor.
    About OS X Memory Management and Usage
    Using Activity Monitor to read System Memory & determine how much RAM is used
    Memory Management in Mac OS X
    Performance Guidelines- Memory Management in Mac OS X
    A detailed look at memory usage in OS X
    Understanding top output in the Terminal
    The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.
    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM dependent.  It will improve the performance of applications that run mostly in RAM or when loading programs.

  • Question about how much ram I need to download

    Q: How much ram do I need to download premiere pro? I have 4 right now.  Windows 7 is my platform.  I was told I can only upgrade to 6 rams total. Will that be enough? 
    Basically I tried to download the premiere pro trial and could not, even with the help of tech support.  I was told I needed more Ram.  I have the Adobe cloud on my desktop right now and want to try to premiere pro program.

    Hi J.Manson,
    Please refer to the following link :
    http://www.adobe.com/uk/products/premiere/tech-specs.html

  • How much RAM should be in use while not running anything?

    Just for the heck of it, I checked the Activity Monitor with nothing else open to see how much RAM was being used. Much to my surprise, nearly 900MB of my 2GB was being used with literally every application closed except for Activity Monitor. This can't be normal...

    My Macbook Pro is also using about 1.3GB RAM with virtually everything shut down (mail, safari, ical, itunes, etc). Yet, my husbands uses only about 400-500MB with the nearly identical applications left running.
    I have 4GB, he has 2GB.
    We compared the running applications one-by-one, and mine uses nearly double his for the exact same application.
    Does a laptop use more memory if it has more memory to use?
    This really bothers me. There does not seem to be any reason for mine to be consuming more RAM when running the same small applications as his does yet I can't figure out why?
    Ahhhhh!

  • How much ram can I install in macbook pro

    I have a 15" Macbook Pro with the 2.4GHZ processor.  Purchased in 2008.  How much RAM can I put in it?
    Thanks!  George

    Here is what I found.....
    Model Name: MacBook Pro
      Model Identifier: MacBookPro4,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: MBP41.00C1.B00
      SMC Version (system): 1.27f3
      Serial Number (system): W881****YJZ
      Hardware UUID: 25EAF703-47DE-5074-AACB-10371AD4B7EE
      Sudden Motion Sensor:
      State: Enabled
    System Version: Mac OS X 10.5.8 (9L31a)
    <Edited by Host>

  • How much RAM should I get?

    Okay -- I have been using an iBook g.4 1.33 GHZ since mid-2005. I think it's time I got a new Apple product, and I have settled on the MacBook Pro 13 Inch 2.26 GHZ that would come with 2 GB of RAM.
    I am wondering two things.
    1) Since Apple charges too much for RAM upgrades, would if it void my warranty if I bought 2 extra gigs from Crucial and installed it myself (and is self installation even possible with the unibody design?)?
    2) Do I even NEED 4 GB? I do a lot of internet surfing, and minimal video editing. I've been told by someone that even if you get a lot of RAM, that doesn't mean your computer will even utilize it. Is this true?
    I want the new Macbook I purchase to be fast as **. Will 2 GB do the job?

    The newer models are not as easy to upgrade but you still can upgrade yourself. Now you have to remove the whole back rather than press a lever to easily access the hard drive etc. Infact come to think of it you would have had to remove the whole back from older models for RAM upgrades anyway.
    Snow Leopard is on it's way which is 64bit and would utilise more of the of the RAM. I would gor the 2GB and later if you feel the need upgrade yousrself. So long as you are careful and treat your computer with "kid gloves" you will be fine.
    Hope this helps.

  • How much ram should i put in my mac mini mid-2011?

    Hello, so i have a mid-2011 mac mini intel i5 2.3GHz with 2gb of ram and sometimes its kind of slow.. I've searched on OWC for ram and found 4gb (2x2gb) for about 58$ and 8gb (2x4gb) for 105$. I am an high school student that does a lot of pages documents, garageband and imovie projects, iphoto editing and i sometimes use xcode. Should 4gb of ram be sufficient or it would be better if i had 8gb? Well, i know that more ram is always better, but would 4gb make a lot of difference from my 2gb?

    You can get a 120GB Samsung SSD on Amazon for $90. Put your movies and music on an external drive since it doesn't matter how fast you read/write those. You can take your current internal drive and put it in an external enclosure for $15.
    For the money, this will give you the biggest performance improvement.
    But, if you still want to upgrade your RAM, you can go to the Activity Monitor app, Memory tab, and look at "Swap used" in the lower left corner. That will tell you how much data *would* be stored in memory if you upgraded. Check this number next time your computer is running slow. If it's 2GB or less, then you wouldn't benefit at all from > 4GB total memory. Currently I "only" have 4GB of memory in my Mac Mini and I'm running a bunch of stuff and I'm using zero swap, so I would get literally no benefit from more RAM.

  • How long does it take to install this OS and how much?

    I have a macbook pro 15 inch with snow leopard installed.  I was wondering how much it costs to upgrade to loin, if its even possible with my hardware and what the cost is?  Specs on macbook pro are:  Intel Core 2 Duo
                                                                         2.53 GHz
                                                                          1 processor
                                                                           2 cores. L2 Cache 3 MB, Memory 4 GB, Bus speed 1.07 GHz, SMV version 1.49f2
    Thank you to anyone wh knows this info.  My first post.

    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    I believe the cost is $20.

  • How much RAM should I dedicate?

    Somewhere I read, the rule of thumb to assign RAM for SGA is 30% of server RAM
    In the enviroment where a server is dedicated only for oracle server, nothing else, not even file sharing, is it safe to increase the rule of thumb of 30%for the SGA?
    Using 30% ROT :
    512 MB server à SGA will be around 150 MB, 1 GB -> 300 MB,
    2 GB -> 600 MB which in this case 1.4 GB left for the OS which I think is too much.
    If I wish to dedicate as much as possible memory for Oracle, what will be the optimal SGA for (oracle only) server with:
    - 1 GB
    - 2 GB or more
    Thanks

    We mostly run OLTP and generally find for a single Oracle database environment that 25% of the real memory is more than adequate. The Program Global Areas (using dedicated sessions) generally require more total memory than Oracle itself. But these numbers really depend on your application, user load, and how the users/application interact with the database and the total amount of resources: cpu, memory, and disk available.
    You may only need 10% of available memory for a small system on an oversized machine or you might need 75% for the SGA depending on load. Many sites allocate more memory to the Oracle buffer pool and shared pool than they can "effectively" use. Hardware vendors love this and I have found they tend to error to selling more hardware than is necessary.
    Better to have unused horse power than not enough. I have lived in the not enough world and take my word for it, you do not want to have to work there.
    Good luck. Sizing is a guessing game in most cases. If you have a current system you make judgements using it. If you do not have a current system to serve as a baseline then you are just left to guess, hope, and pray.
    IMHO -- Mark D Powell --

Maybe you are looking for

  • How to Install Windows OS on a two partitioned internal HDD?

    Hi I have a late 2011 macbook pro 8,2 (MD318HN/A). A month ago, I installed Windows 7 using Bootcamp. For that I made a partition of 50 GB on my internal 500 GB HDD. After sometime in need of space, i formatted that 50 GB partition using Disk Utility

  • Is there a restriction on deleting data from an table through a view?

    I have an Oracle Forms application where, try as I might, I cannot delete records based on a view. I know that the restriction may be because of Forms but, is there a database level restriction on deleting records through a view?

  • Blue screen of death during start-up

    Hey Adobe-Community, I am having troubles with After Effects CC again. Every time I want to open After-Effects i get a BSOD. The last thing I can see is the opening-loading-thing (talking about that thing just the after effects version of it, logical

  • DW CS3 (Windows) Fails to start

    Just tried to start DW after a long gap, and I just get the green splash screen, but that's it. The splash screen stays, but hangs forever. All other of my CS programs start fine. I've tried re-installing but that's not cured it either. I'm on XP pro

  • How can we enable the trace at schema / user level

    Hi , I knew how to enable the trace at session level and system level. How can we enable trace at schema / user level. Thanks Naveen