Install MAC OSX 10.5 with 10.4

Hi there all,
I have a 933mhz G4 Mac book and I want to experiment with OSX 10.5. I currenlty have 10.4 installed. As I have just above the min spec's for 10.5, I want to preserve my instillation of 10.4.11. Can I dual boot 10.4 and 10.5? If I make a second partition on the HDD, could I install 10.5 on it and on booting choose which version of OSX to boot into?
James

If I make a second partition on the HDD, could I install 10.5 on it and on booting choose which version of OSX to boot into?
Yes. Of course making such a partition will erase the entire disk, so you will have to back everything up first and then reinstall Tiger as well as installing Leopard: that done you can choose which to set up as your startup disk, and you can hold option while booting to bring up a screen to choose the other partition. Or you could get a firewire external disk drive and install Leopard on that.

Similar Messages

I'm trying to install Mac OSX on an external drive with my Mac Mini

A few days ago, I picked up my new Mac Mini. I'm using the install disk included with the Mini in an attempt to install Mac OSX 10.4.5 onto my external hard drive - a LaCie d2 200GB.
The installer knows the LaCie is there - but it won't let me install it there. I had no problem doing this with my last Mac (Power Mac G4). Does anyone have any suggestions?
Mac Mini Duo Core 1.66Mhz Mac OS X (10.4.7) LaCie d2 Firewire Hard Drive 200GB

If you are using an Intel mac mini you need to change the partition scheme. Without doing this the Intel Macs cannot boot from the drive.
To do this you need to open Disk Utility, select your drive (not the partition), then select the Partition tab. In there you'll see an Options… button. Click on it and change the partition scheme to GUID Partition Table. Click OK and then apply the reparitioning.
Please be aware that by making this change you will be able to boot your Intel Mac from the drive although a PowerPC drive will no longer be able to use the drive as a boot drive.

Problem installing Mac OSX on my new MacBook hard drive...

Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)

Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies,

How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?

hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??

You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck!

I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.

Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again

When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive. I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

Quicktime Player states "You can't open the application QuickTime because the Classic environment is no longer supported." I just installed Mac OSX Snow Leopard. What do I need to do?

I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8

Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)

Installing Mac OSX Leopard Server 10.6 on a Mac Air

Hi
Im trying to install Mac OSX Server 10.6 on a Mac Air which have Lion developer preview 4 on it, i try to install from
a .dmg file thats stored in the downloads folder when it runs it give me a message "resturt to begin installation" with a
restart button, i click it and then computer restarts and nothing happens why ?
also the server file is big 7 GB so i failed to burn it on dvd or copy to external hard disk and install from there

You will want to use a external double-layer (DL) DVD disk that you've recorded, or use an external disk configured to boot the distro.
Also make a full backup of your boot disk before you load this, as there is no "downgrade" option to get back to whatever version of Snow Leopard client you might be using on the box.
Please (also) read the HT4313 support article.
And for completeness...
This particular configuration isn't supported by Apple.
Mac OS X Server doesn't "like" DHCP addressing, and that can be common on portables.

Cannot install mac OSX lion v.10.7 on mac mini

I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

Hello, perhaps you're confusing RAM Memory with Disk Space?
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Installing Mac osX Tiger

Hi there my name is Taha and i am from Pakistan
I want to know if there is any possible chance of installing mac osx tiger into my pc i had recently bought the specification of the pc is Intel 2.66 core 2 duo with 2 gb ram 160 Gb hard disk and a 128 Mb graphics card
if not can you please give me the reason why it is not possible
Thank you

Hi Taha
Your question was asked and answered here.
Hypothetical question but why can't you install OSX on non Apple computers?

Can i install mac osx back again after installing windows 7 on my mac book a1181?

i have apple mac book a1181 white, but i had problem logging on as it was secured by a password, and i allready lost my recovery dvd, so i installed windows 7 on my mac book a1181 by deleting its partition from GTP to NTFS but i experienced problems after installing windows 7 as sound was not comming as i could not find sound drivers for macintosh, so now i plan again to restore my apple macbook a1181 back by reinstalling mac osx 10.5.8, how can i again install mac osx on my notebook and is it possible to re-install mac on my notebook? please give me some help.

Insert your OS X install disc and restart holding the C key, hold it down until you see the Apple logo and spinning gear. Choose your language and at the next screen from the top menu bar select Utilities-Disk Utility. Select your internal hard drive, click on the Partition tab and select 1 partition. Click on the Options button and select GUID partition scheme. Click OK. Choose to format the drive as Mac OS Extended Journaled. When Disk Utility is done and your drive is properly partitioned and formatted quit DU and go back to the installer screen and reinstall OS X. When you're up and running run software update a couple times to get everything up to date as far as you can with 10.5.8. Then consider upgrading to OS X 10.6.8 Snow Leopard for $19.99 here http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Can i Install Mac OSX Leopard 10.5 /10.6 ?

Hello guys,
I've bought about 3 weeks ago an iPhone 3G. Since i have my iPhone i like to produce software for the iPhone with the developers kit from apple. But i have one problem. I have an Acer Aspire notebook with:
4GB memory
Intel Processor (2,2 GHZ)
Ati Videocard
Windows Vista Premium
Can i Install Mac OSX on this notebook ? Maybe with dual boot.
Best Regards,
Theodoor de Wit

A slightly different perspective from what others have already posted:
Even assuming there were no licensing/legal problems with this & you could somehow successfully hack the OS & SDK to install & run on your Acer, would you really want to try to use that as a development platform for iPhone apps? It would be like trying to build a sturdy house on an uncertain foundation: you would never know if or when the whole thing might collapse or how to tell if the fault was in what you built or not.
If you want to develop for the iPhone, invest in a Mac. If you are any good at it, judging from the success stories you could quickly & easily make back the cost of that investment & much more. Even if you don't, you will have a very well made & supported computer running what is arguably the most stable & user-friendly OS on the planet.

APPLE ID TROUBLE. I NEED PREVIOUS OWNERS APPLE ID TO RE-INSTALL MAC OSX ON MY COMPUTER =-PLEASE HELP-=

So 2-3 weeks ago I was deleting some files off my Macbook Pro. All of the sudden my computer crashed, and switched the
language, and the screen was flashing. After trying to fix it, and figuring out the problem, I could not figure it out so I decided to re-
install MAC OSX. I erased my whole hardrive and went to the title screen. It wanted me to enter my APPLE ID, but it wanted me to
enter the apple id that was for the PREVIOUS owner. Which I had no clue (it also wanted the password.) So now I am stuck.
I don't know if I should take it to the apple store or what, but this is very annoying. I really need someone's help. Please help me!
Thankyou, God Bless

ralph40,
when you bought your 13-inch Mid 2009 MacBook Pro from the person on Craigslist, did you also receive two grey installation DVDs with it? They would have originally came in the box with your MacBook Pro; one has a bootable version of Mac OS X for your model (either 10.5.7 or 10.6.0, depending upon when it was manufactured), and the other has your model’s Apple Hardware Test and its iLife apps. If you didn’t receive these two grey installation discs from the seller, then you can purchase a replacement pair from Apple.
If you have either the two grey installation DVDs or the white retail Snow Leopard DVD, and your internal disk is now completely erased (including its recovery partition), then you can reïnstall Mac OS X from the DVD, and associate the MacBook Pro with your Apple ID, which will end the association with the previous owner’s Apple ID. Once Mac OS X is reïnstalled, run Software Update to get to 10.5.8 (from 10.5.7) or 10.6.8 (from the grey 10.6.0 disc or the white 10.6.3 disc), If you’d installed 10.5.7, then you’ll need to install Snow Leopard from the white retail disc to get yourself to 10.6.8. Once you have 10.6.8 installed, you can then download Lion, Mountain Lion, or Mavericks through the Mac App Store if you wish.
If any of the apps on your MacBook Pro had been purchased through the previous owner’s Apple ID, then note that you’ll need to purchase them yourself through your own Apple ID, since apps downloaded through the Mac App Store (including, but not limited to, Lion, Mountain Lion, and Mavericks) are non-transferable. Any apps that were purchased through the Mac App Store using your own Apple ID will be redownloadable gratis by holding down an Option key when you select the Purchased tab.

Can not install Mac OSX Update Combo10.4.5 PPC

I have a clean installation of Tiger on a Power Mac G4 (AGP graphics) with Sonnet 1 ghz processor upgrade, updated to 10.4.3 by running Software Update. No other updates available at this time.
So I downloaded MacOSXUpdCombo10.4.5PPC.dmg and it stops at "Select a Destination."
"You cannot install Mac OSX Update Combined (Power PC) on this volume. This volume does not meet the requirements for this update."
I must have installed this update previously, to get to 10.4.6, to install Adobe CS3 which REQUIRES 10.4.6.
Now I can't figure out how I got this update installed - sorry if this has been posted previously.
This isn't my main machine, thankfully, but I use it as a spare in the studio to transfer images to.
Can anyone help me get this OS updated to 10.4.6?
I don't have the original processor, so re-installing it isn't an option.
Thanks.

No, I wouldn't ignore them, I think we really have more messed up than just this, and if any of these steps fix it, we'll likely need new downloads.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
May even need to do an Archive and Install if you have room on the HD, but saves all your files and gives a new OS...
http://docs.info.apple.com/article.html?artnum=107120
I only use Software Update to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
If all the above fails, then it appears to be time for an Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings.

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.
I had no problems on snow leopard.
thanks

Well I found my answer…
http://www.focusrite.com/answerbase/en/article.php?id=1159
At the time of writing, the following products arecurrently not working with OS X 10.7:
Saffire PRO 14
Saffire PRO 24
Saffire PRO 24 DSP
Saffire PRO 40
Liquid Saffire 56
Liquid Mix HD
Forté Suite
Scarlett Plug-In Suite
Focusrite is committed to providing support for ourproducts with the latest operating systems. We are currently working onproviding full support for our products with OS X Lion, and these will beavailable as soon as they are complete.
Please check this page regularly for the most up to dateinformation regarding OS X 10.7 Lion compatibility information.

Install MAC OSX 10.5 with 10.4

Similar Messages

Maybe you are looking for