Install "Make" and other unix tools on 10.5

I am new to Macbook but accustomed with other unix computers.
I want to have unix tool "make" available on Mac 10.5.
Where can I download this and other tools? Are there pre-built binary distributions?

xcode sounds like a helpful hint, thanks.
Now the box with the installation media is here, while my wife and the computer are abroad for a few weeks. Can this xcode be installed by download from somewhere?
(Of course I tried to enter "xcode" in the top right search box on this webpage, but I end up at a server error page not found page (does apple's own search function not create correct links?).)

Similar Messages

  • Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution

    Hello I am on a macbook pro (retina IOS 9) i have installed xcodes and command line tools but codeblocks does not compile, terminal gives this message /Users/MacPc/Desktop/Untitled1: Permission denied      any one has a solution?? please...

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?

    The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
    The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
    This is designed to be done right away with a new iPhone.
    If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.

  • Tools menu is missing items I am expecting after I install extensions and other oddities

    In the process of installing and customizing Firefox 3..6.4 on a new laptop, I noticed that when I expand the Tools menu, I do not see items for a number of the extensions I installed, which I see in Firefox on my old system.
    For example, I installed the "PDF Download" extension and did not see a selection for "PDF Download - Options" in the Tools menu. I installed quite a number of extensions and in summary, the Tools Menu never changed one bit.
    A different example. After I installed the Launchy extension. I went to customize my tool bar but the button for Launchy was not available to add to my toolbar.
    Yet another example of strangeness was after I installed IE Tab. When I right-clicked on a link the "Open link in IE Tab" did not show up in the menu..
    I tried doing a clean uninstall of Firefox following instructions from several websites and then reinstalling Firefox. Regardless of what I did, I was unable to see the expected items in the Tools menu after installing my selected extensions.
    Things start to get weird. I performed a clean uninstall of Firefox 3.6.4 and downloaded and installed Firefox 3.5.10 and proceeded to install all of the extensions I had installed on my other system. Most of the items I was expecting to see in the Tool menu were there, BUT there were several lines that were blank which did not do anything when I selected them.
    I was able to determine that they were related to the AdBlock Plus, downthemall! and fireftp extensions. Once I uninstalled them, the empty lines in the menu disappeared. I tried reinstalling them one by one to see if any of them would appear correctly in the menu, but adblock plus and downthemall did not. I left FireFTP installed and left adblock plus and downthemall! uninstalled.
    I then upgraded from 3.5.10 to 3.6.4 to see if all of the Tools menu items would remain. They did remain.... I then tried to install adblock plus and downthemall! but there was no change to the Tools menu, considering that in Firefox 3.5.10 I was getting empty lines in the tools menu for where I should see "Adblock Plus Preferences" and "DownThemAll! Tools".
    Not sure what is going on here, but something odd is definitely going on here. I have not tried to install any other extensions, but my gut instinct is that I will see more issues when I install new extensions.

    I had a similar problem and could not get FireFTP to show in the Tools menu and did as someone else suggested (amongst other things), I 'Disabled' the ZoneAlarm Toolbar through 'Add-ons' on the Tools menu and presto FireFTP appeared on the Tools menu after restart. Good luck

  • OVS 3.2.1: Installing libvirt and/or virt tools (e.g., virt-install)

    Has anybody here successfully installed libvirt and/or virt-install on Oracle VM Server 3.2.1?
    I've attempted to install libvirt & virtinstall from source...
    [root@xen3 virtinst-0.600.3]# cd /usr/local/src/virtinst-0.600.3
    [root@xen3 virtinst-0.600.3]# python setup.py install
    running install
    running build
    Version              : 0.600.3
    RHEL6 defaults       : False
    Formatting ru.po to build/mo/ru/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting gu.po to build/mo/gu/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting nl.po to build/mo/nl/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting pt_BR.po to build/mo/pt_BR/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting zh_CN.po to build/mo/zh_CN/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting sr.po to build/mo/sr/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting zh_TW.po to build/mo/zh_TW/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting [email protected] to build/mo/sr@latin/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting it.po to build/mo/it/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting fr.po to build/mo/fr/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting es.po to build/mo/es/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting uk.po to build/mo/uk/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting da.po to build/mo/da/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting ja.po to build/mo/ja/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    Formatting pl.po to build/mo/pl/LC_MESSAGES/virtinst.mo
    sh: msgfmt: command not found
    running build_py
    running build_scripts
    running install_lib
    running install_scripts
    changing mode of /usr/bin/virt-clone to 755
    changing mode of /usr/bin/virt-image to 755
    changing mode of /usr/bin/virt-convert to 755
    changing mode of /usr/bin/virt-install to 755
    running install_data
    error: can't copy 'build/mo/ru/LC_MESSAGES/virtinst.mo': doesn't exist or not a regular file
    [root@xen3 libvirt-1.0.2]# cd /usr/local/src/libvirt-1.0.2
    [root@xen3 libvirt-1.0.2]# ./configure
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... no
    checking how to create a ustar tar archive... gnutar
    checking whether to enable maintainer-specific portions of Makefiles... yes
    checking whether make supports nested variables... no
    checking build system type... x86_64-unknown-linux-gnu
    checking host system type... x86_64-unknown-linux-gnu
    checking for gcc... no
    checking for cc... no
    checking for cl.exe... no
    configure: error: in `/usr/local/src/libvirt-1.0.2':
    configure: error: no acceptable C compiler found in $PATH
    See `config.log' for more details...but been confounded by the lack of gcc in the public-yum repo .
    [root@xen3 libvirt-1.0.2]# yum search gcc
    ======================= Matched: gcc =======================
    libgcc.x86_64 : GCC version 4.1 shared support library
    libstdc++.x86_64 : GNU Standard C++ Library
    libtermcap.x86_64 : A basic system library for accessing the termcap database.
    python-zope-interface.x86_64 : Zope interfaces packageIdeas? Suggestions?

    Suggestions…? Well yes… simply forget about that! Oracle treats OVM server as an appliance - or least they'd like to and sell us the hardware as well. Since they can't do that, they decided to "craft" the system to their likings and omit lots of things one might consider either necessary or nice to have.
    Oralce did intentionally leave out all the gcc stuff and a lot of the other tools as well, to make sure mortals don't mess around with the system. If you want to use OVM then you will have to live with that or risk breaking any part of OVM and rendering your installation unsupported by Oracle.
    Besides, I don't actually see, why one would need to install libvirt/virt-install on a OVM server?

  • Unable to login as sysdba after installing ODAC and Oracle developer tools

    Hi..I was able to login with
    sqlplus / as sysdba and unlock scott account.
    I then installed ODAC and now when i try to login as sysdba i get Insufficient privileges error.
    also tried sys/password , sys/change_on_install, system/manager but no luck.
    Please help.I am using a desktop and logged in as an administrator.

    989994 wrote:
    Hi..I was able to login with
    sqlplus / as sysdba and unlock scott account.
    I then installed ODAC and now when i try to login as sysdba i get Insufficient privileges error.
    also tried sys/password , sys/change_on_install, system/manager but no luck.
    Please help.I am using a desktop and logged in as an administrator.I think we are missing some information here. Are you trying to connect via Server Explorer?
    If so, you need to choose the drop down box and set it to "SYSDBA".

  • What is the best way to install OSX and other computer files?

    Hi,
    Long story short my Mac OSX got rewritten over with Windows XP so have to do a fresh install. So do I do the fresh install first and then transfer over all the stuff from my sister's computer to mine via Firewire?
    You know when you first get a Mac it says do you want to transfer your files from another computer, well that is what I want to do since my sister's computer has a lot of what I used on my computer. So do I do a fresh install first and then is there an option to transfer over all her stuff after the fresh install? Or do I have to manually grab what I can off her computer?
    Basically just want to know which comes first.
    S.

    I think it's offered as an option at some point during the installation. But you can always start the Migration Assistant at any later point (it's located in Applications/Utilities) - that's the same application.
    That's what I did, actually. I did a clean install first and only after everything was up and running did I hook up my old G4 and transferred things over with the help of the Migration Assitant.

  • X I and other integration tools

    can any one tell me  ...the advantages & disadvantages of XI comparing with other integration tools...

    Hi Lokesh,
    Go through the following threads, you will surely be able to find something useful:
    Advantages Of XI
    SAP XI advantages
    Advantages of SAP XI
    What are the adavantages SAP XI for legacy customers
    Scope and demand of XI
    SAP XI over Business connector
    XI vs BizTalk , WBI
    functionality differences between XI and other middleware
    Before XI?
    Connectors and Xi...
    Benefits Of XI
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=16263
    If you still need more, try searching on SDN with keywords XI and Advantage. You will find lots of stuff (apart from the above links )
    Bye
    Ankur

  • Problems installing photoshop and other adobe products

    hey! i recently make a clean windows install. (xp pro) and wen i try to instal photoshop cs3, i run the setup.exe but nothing happens, so i cant make it work,
    and with illustrator cs5, i was able to make the install, but when i try to run it it says to me that there is an invalid image, with a file named AIRes.dll
    any ideas?

    Not much point in your post. You did in no way provide enough info. In particular it would be relevant in which order you are attempting to install and what otehr Adobe products are on teh system. Anyway, based on your post it sounds like you already made a mess of things, so run the Creative Suite Cleaner Tool and start over...
    Mylenium

  • Adobe CS5.5 Production Premium Install Errors and Other Issues

    Hi,
    I just  installed Adobe CS5.5 Production Premium on my computer and had some  errors pop up at the end of installation.  I  will paste the summary below.   I've tried to install Procction Premium a couple of times.  I've used  the Adobe Cleaner Tool.  From what I've researched, the Flash Issue  is a  a false error since Flash was already installed on the computer.   Is  the rest of it connected to the Flash issue as well?
    Thr programs all seem to work fine except for the issue below.
    My  other question is that when I am in Windows Explorer and I Right-Click  on say a .jpg file and select Open With...  I am not able to select  Adobe Photoshop or Illustrator for that matter.  I have Dreamweaver CS4  and that shows up as an option.  I have gone through the process of trying to add the  Adobe Photoshop .exe file, but it still doesn't work.  However, if I open Adobe Bridge, I am able to select Photoshop or Illustrator to open a file.  Is this  connected to my install or is there something else going on?  I did  uninstall an ancient version of Adobe Photoshop 7.0 that I've had for  years, but that was prior to installing Production Premium CS5.  Could  that have caused an issue?  I read that uninstalling an old Photoshop  can cause problems like this.
    Any help would be greatly appreciated.
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 2 warning(s)
    ----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
    WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current
    State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)
    \Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit
    2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-
    1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce  for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe  Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target  C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part
    of the setup did not finish as expected. Contact your support personnel or package vendor. Action
    NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -
    install plugin -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run
    as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,
    command: -install plugin -msi
    ERROR: DW050: The following payload errors were found during install:                                                  
    ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
    Message was edited by: rynohose

    Yes, your installation errors appear to be the innocuous false errors related to the brain-dead Flash installer. If the programs seem to be working fine, don't worry about it. As far as not being able to open images with Photoshop from Windows Explorer, I recommend taking that question to the Photoshop forum.

  • How to install "make" and "gcc" on MyRIO ?

    Hi,
    I try to install ppp for using a 3G modem but for that I have to use gcc and make.
    I can't find packages compatible with myRIO system. I have always " Packages for make found, but incompatible with the architectures configured" error using OPKG.
    Do you have a solution ?
    Thanks

    Hey enzol,
    It would be better to post this question in the NI Linux Real-Time community.  There are more Linux gurus there that can point you in the right direction.
    Thanks!
    -Sam K
    LabVIEW Hacker
    Join / Follow the LabVIEW Hacker Group on google+

  • Which course is better for consolidation apects of BPC and other EPM tools

    Hi All,
    I am having the technical understanding of BPC as a tool, but I am not able to understand the consolidation part of it. I would like to gain an insight of the financial part of the BPC consolidation. Not only this, there are few other tools in EPM suite (like Intercompany reconciliation; Financial consolidation; Disclosure management; Financial information management) which requires relevant understanding of Financial accounting.
    Can anyone please suggest, which Professional course would be better for the above tools; not just from the point of knowledge but also with regards to job prospects (as I have seen that company's now asking for consultants with background of CA/CPA/ICWA etc).
    I had gone through the course structure of ICWAI, but not sure whether it will be of very help.
    Please suggest.

    Hi Sonti,
    I understand your point, but as you might be knowing that in real world no one just decides by looking at the face that this guy is having good finanicial knowledege, so lets take him for the job. Moreover when it comes to client interaction, if the client is given two profiles - where one consulant writes only his experience and knowledge and the other one describes his/her added certification or post graduation in the concerned subject (in addition to the same level of experience and knowledge), then ofcourse the second one will be given the priority over the first.
    So my view is that just by understanding the topics will never give you the cutting edge in the market, you additionally need some thing to make your profile an eye catcher and that too needs to be relevant with your area of work.
    Thats where I am confused and hence posted the question.
    Also many thanks for the book that you have suggested, that might be a good option for the time being.

  • Brushes and other like tools

    Hi.
    I have downloaded the trial version of CS5 and everything looks great, except that any brush circle indicator starts of complete when it is at a small size but as soon as you make any of the brush tools larger the circle starts do break down. I contacted the help phone line but as I only have the trial version they will not help me, so I wonder if any of you smart guys and girls know of this problem and what causes it and how to fix it.
    Thanks

    Known issue with older nvidia drivers. Update your video card drivers

  • In spite of having a fairly good network connection,On installing photoshop and other softwares,its asking me to recheck and try again, Why?

    Its says ,
         You must have a working internet connection to use this product.Please check your connection settings and choose try again.If you still experience problems,contact customer support

    I wouldn't worry about your firewall just yet.  There are other factors far more likely to be the cause.
    What operating system are you using, and where are you up to in the installation process?  Do you have the CC Desktop Application Manager installed OK?  If you have got to that stage, best practice if having problems is to restart your computer.  If running Windows 7 or 8.1, right click and run the Desktop Application Manager as Administrator.  Then install Photoshop.
    Note. that the progress bar uses the first half to indicate the download progress, and second half to show the installation on your computer.  If the bar reaches half way and stalls, then it is the install that is giving problems.
    If you have tried and failed, you might need to run the cleaner tool.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    This FAQ should get you past most installation problems
    Creative Cloud Help | Install, update, or uninstall apps

  • Lasso and other selection tools

    When I select an object and resize, or transform it, it makes the edges blurry, and not as sharp. I've been using this tool forever and it only started doing this. Can anyone help?

    It happens when I work at 100% magnification, and at all magnifications. The feather value is set at zero. I'm working with photoshop Elements 12 on the Cintiq Companion. Wacom said it must be a photoshop problem. It just started happening out of the blue -- don't know why it's not working like it used to. Any other suggestions? thanks!

Maybe you are looking for